Missing LO changes and creations since one month

Hi
We have some issues with our LO data source and now the issue has been resolved. We need to delete the requests since one month
and reload. We have the following date selections available in the info pakcage Createdon and changed on. Can we load all the
changes and new creation during that time with this selctions without getting duplicates ?
Please advice

Hi,
created on load part is fine as you said and you should do that but
then load the data changed between those two dates
this part will create issue as it will send records to cube which are already present in the cube since they can have created on dates in the past.
created on load part is fine as you said and you should do that.
I mean....same record can have created on and changed values
created on is static and will never change...so a record created in 01.01.1900 will not come in your selection based on created on but it is still present in the cube.
now if the same record got changed in the last one month..i.e. the time when the delta was not working...if you give the changed on selection then it will bring the same record again...and may be if your load goes for two days then for the third time as well if it gets changed on last loading day...
some thing like you loaded for the selection
first you loaded created on 01.01.1900-31.09.2008
then changed on 01.10.2008- 02.12.2008
Now there is one record which as created on date as 01.01.1900...and changed on date as 02.10.2008...and if the old record is not deleted from the cube then it will get doubled. after load based on changed on
also if the load keep on running for two days and is the same record got changed on 03.12.2008 then it will come thrice.
So in any case you will have to delete the history from the cube to load the data correctly.
Thanks
Ajeet

Similar Messages

HT201321 my Apple wireless keyboad and Mouse dosent work since one Month after geting the new iMac 27 !Would getting the Osx 10.7.Bluetooth utility repaired after updating onto 10.7.5 & Admin Tools 10.7.5 ?

Hi Dears
My Apple wireless Mouse and keyboard dose not work since one Month after getting the new iMac 27 !
The Bluetooth assistant could find the Devices for few seconds but can not pairing them ? at least get an error
Operation system is already of version 10.7.5 updated ,but no use ?!
Could getting the Os x 10.7.5 Bluetooth utility repaired after updating to Admin Tools 10.7.5 ?
When not ,than advice me please to repair or solving this problem ,

Your problem is likely due to
com.paceap.kext.pacesupport.snowleopard 5.9.1
I would recommend tracking down the app that uses this and unionist all it completely from your computer. Also if you have upgraded the RAM on the machine you may have a RAM falling DIMM or it may have become unseated or it might not be the correct specs for your machine.

Can u tell me any predefined BAPI for change and creation of Material

Hi,
Can anybody tell me predefined BAPI for change and creation of Materialmasterand Pricing?
Thanks & regards,
Gopianne.

you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
When changing material master data, you need enter only the material
number.
In the header data, you must select at least one view for which data is
to be created. Depending on the view selected, you must maintain other
required parameters. If you do not enter values for all of the required
parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first
be supplied with data by the calling program. An indicator must also be
set for each of these fields so that the data is written to the database
by the method. This requires the calling program to supply the
corresponding field with the indicator in a checkbox table (for example,
CLIENTDATAX). Checkbox tables exist for tables that do not contain any
language-dependent texts (MAKT, MLTX), International Article Numbers
(MEAN), or tax classifications (MLAN). Several data records for a
material can be created in these tables.
regards
vivek
reward points if it helps

Configuration to setup approval for vendor changes and creation

Can anyone help to know where to switch on the approval for vendor changes and creation?

Just a quick thanks that it worked, aesiris.
Also on the that page: https://wiki.archlinux.org/index.php/Po … Management
i2c device power management can be managed with very much the same rule structure:
ACTION=="add", SUBSYSTEM=="i2c", TEST=="power/control", ATTR{power/control}="auto"
Can't for sure say the same for spi devices, since I apparently have none. I'd edit that page, but I can't.

Since one month I have a new Imac with Lion.

Since one month I have a new Imac with Lion.
I installed Ilife'11: when I open IDVD it doesn't find the Idvd themes.
What is happening?

To get to the App Store, you need to upgrade the Tiger machine to Snow Leopard.

HT4157 once you set up a account and just want one month service, how do you turn off the account after the one month

once you set up a account for data service and just want one month service, how do you cancel after the month

Hi Glenrose,
That would be between the you and the carrier that you have the contract with. In the past, I was able to purchase only one month of service from AT&T. Not sure what carrier you have or what contract you have, but you would have to cancel it with them.
Cheers,
GB

TS3274 I recently traveled to Europe and purchased a one month subscription (as this was the only time amt available) and now am back...how do I go back to using 3G?

I recently traveled to Europe and subscribed to the European 3G for one month (as this was the minimum amount of time to purchase). I am back in states and it seems to be slowing my ipad down distinctly. How do I unsubscibe to the European 3G?

Hi Mike, Should not be necessary to unsubscribe to the European 3G provider - you just need to remove the micro sim card from your Ipad. If by chance you find out that your Ipad is "locked" into this European provider then you will need to contact them to unlock. You then need to sign up to a local broadband internet provider to buy another 3G micro sim card on a plan, insert this into your Ipad and set up again. NickGS

Need Users information since one month or one year

I have cheked with 'ST03' but am getting only one week data of users after that popup message is 'list contains no data'. In our system 'audit security log' is inactive so iam unable to view with SM19. STAT also not giving that much sufficient data.
so how can I get users information means what tcodes they used one (month back ) and logon time every thing .Is there any reports /tables to view the data which is related to users. give your suggestion soon.
Thanks,
nani

Hi Nani,
Please follow this:
go to st03n
in exper mode-then collector and performance database
then workload collector->under this go to total collector->then go to control and double click
it will show u the view SAP NW Worload collector:maintain the collector parameters
make sure that under week aggr.,month aggr and Gen total all are check in
follow the note 12103 to make sure the job is running fine
let me know if this helps
Rohit

My partner's iphone was stolen last week and the password to her apple ID was changed. They have control of the email and Microsoft won't let her change the password for one month. She has bought a new Iphone and wants to activate it. What can she do

My partner's iphone was stolen last week and they have changed the password to her Apple ID. They also have access to her email. She can't change her email password for 1 month. She has bought a new iphone. How can she get it activated?

She may want to contact Apple account security: Apple ID: Contacting Apple for help with Apple ID account security

HP Officejet once was set up wireless, and worked, after one month, it will not connect to router?

I have been working with this new HP all in one wireless printer, and was working great, then one day out of the blue it stopped. I can't print out a thing, and when checking on why it stopped, it first printed out that it was not connected to the radio connection, which I thought was Bogus, then after working on it a little more, I went to the wps on the router and held down the WPS, as was requested for 3 seconds, but when I returned to the printer, it all looked as though it was downloading until it got down to 7 seconds, then it stopped and refuses to connect to the router. Does Anyone have any Ideas on how to fix this issue or, tell me what I maybe doing wrong???? This is Now driving me insane. I am connected to an HP Computor, it appears that the router maybe the problem, so I need HELPPPPPPPPPPPPP! Please, thank's to anyone who can suggest the right fix for this printer.

Hello thesuperdude,
Welcome to the HP Support forums. I gather that you have run into several issues with your Officejet printer since you received an error about the radio connection.
To better understand the issue, please provide some further information:
What make/model/product number of HP printer do you have? Guide to finding your product number
How is the printer connected now (USB cable, ethernet, or wireless)?
Are you getting any error messages? If yes, what is the error message and where are they being displayed?
Is the printer plugged directly into a wall outlet?
What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Have you installed the full feature software and driver onto your computer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

CAT2 Header missing Personnel Number and CC since EHP4 upgrade

Before upgrade, We had Personnel Number, Name and CC as part of the header, along with Entry Period and Week.
Since EHP4 upgrade the Personnel Number and Employee Default CC are missing in the header.
How do I get them to display again?
Edited by: Shelli Ralls on Aug 30, 2011 12:03 AM

Hi,
You can do field maintenance in CAC2.
Regards
Sreekanth

Camera Profiles Missing from Lightroom and ACR since upgrade to Lightroom CC

I upgraded to the latest version of Lightroom yesterday. I have discovered since then that the only profile available in the Camera Calibration profiles pop-up menu is Adobe Standard. This applies to Lightroom CC, Lightroom 5 and ACR. Furthermore the folder where the profles were stored is missing. This is a problem as I have lost a custom profile for editing the white balance in infrared photographs. What is the likelycause of this situation and how can it be remedied?

Hi Beat,
thank you very much for your reply! :-)
That is what I find so puzzling - there are hundreds of profiles in that folder under a "1.0" subfolder...
And yes, I'm sure it's RAW I'm looking at (and the error message appears before I see Lightroom, so it's not about RAW/JPG).
While fiddling some more I found out, that if I start Lightroom as an Administrator, everything is back to normal, but I never had to do this before and I don't see why this should be the case. What would cause such a behaviour to appear suddenly?
Rant:
The whole UAC idea - as Microsoft implemented it - is a major pain, but so far I was willing to bear the burden for the supposed raised security, but more and more I tend to think about switching it off as I did under Windows Vista. If it interferes with my ability to get anything useful done it's not worth it (and I have other software that doesn't like it, not just - suddenly - Lightroom).
Thanks for any hints what this problem could be about!
Cheers,
Thomas Helzle

MRP run and creation of one cumulative purchase req

Hello,
mrp run is creating a lot of single purchase reqs with one line (quantity and dates are fine)
but how to set up MRP so that instead of multiple purchase reqs ONE purchase req with many lines is created.
Thanks, Sebastian

this is not forseen in the design.
Where would be the benefit? have a look into table EBAN.
There would not be one record less with this concept.
Further, in bigger organizations, several buyers would then work with the same purchase requisition, which could lead to lock and update problems.

Bought 1 license CC one month ago and all i have is an expired free trial account

Hi,
I'm looking for help, please.
Since one month ago, I've got a CC license and I can't run it from my computer. All I have is an expired trial account.
When I run any application, Manager demands me a code. But I never received it before.
Did anyone has the same problem, any solution?
Thanks.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

The dreadful Scene Change and Preloader

I've put alot of blood, sweat, and tears into building this
site and the simple parts are causing the most trouble.
Scene changes work (used to), I found early on that if I
moved the longest scene to the end, it did not conflict with the
other menu buttons. It seems like at random, or when the movie is
slow to load, the buttons go to the wrong scene and start playing
at random frames and the buttons will not react.
Preloader works (on one scene), when i move the same eact
code to another scene and just change the instances and scene
information, I only get a blank screen when the movie is loading,
and then to top it off, it will redirect to another scene in an odd
frame. I have tried a number of diferent codes to make the
preloader work, all of the standard "stay on this frame until the
rest load and then play" codes.
I think these two problems are related and I was searching
for informaiton on ROOT and GLOBAL because I don't really
understand them. You can see some of my flash site at
www.danieljkessler.com I think the problem isn't the way I am
coding but something I am missing that is conflicting with scene
changes. Again, the navigation seems to work fine in the actual
movie file, but when its online or Previewed, it has these nasty
problems.
I am willing to pay a small fee to have them fixed or I will
fix them myself if someone can enlighten me as to what causes these
problems.

i found out that you cant put a preloader on each scene, only
one time. So that was the problem. Took me a long time to figure
out the preloader script to only load partially, so I'll post that
here incase someone else has the same problems. Also, for that
person, you want to create multiple swf files and load them into
the file from the external location. That way you can have a
preloader for each scene. A note is to try to avoid scene changes
and work within one timeline, and also that scenes load top to
bottom unless you change the publishing setting, so if you are only
partially loading your movie and find some of the buttons to link
to the scene immediately, rearranging the scene download order by
dragging the scenes in the scene window in order can help to
correct this.
Second, the problems with the scene buttons not working when
the file was loading is because they are linking to scenes that
have not loaded yet. The preloader helps to fix this. Using the
frame name instead of hte scene and frame number usually works but
I think flash like consistency. If I use the same button in
difference instances, I had to use the same format for the
onRelease to work.
I have to say, flash is powerful but its also a huge pain in
the ***. Don't fool yourself, CS3 is not all mighty. I can't
emphasize enough how easy the hard things were to do and hard the
easy things were to do. Flash design is fun, but flash scripting is
real sorcery.
Thanks for all of your quick and helpful replies kglad,
especially during the holidays. My site can be viewed at
www.danieljkessler.com , I still have to do the chinese version,
but I plan using the same file and changing and redoing some of the
buttons with english. God help me.

Missing LO changes and creations since one month

Similar Messages

Maybe you are looking for