Missing Local HD Channels

I've had a problem with missing local HD channels, including NBC during the Olympics. Despite multiple phone tech calls and a tech visit, my problem has not been fixed. I've been hearing that some other Verizon customers in the Beaverton area have had this same problem, and completely changing out coax cables did not fix it. My incoming signal is good, but signal to noise is below what is should be (19). I have a suspicion that it may somehow be linked to my DVR/set-top box, as the latest case of missing channel 508 occurred just as I started recording. Only two channels seem to be affected, 506 and 508, both local HD channels.

You are a long way away from the Crystal Palace transmitter and COM7 is transmitting at only 15,600 Watts compared to the 200,000 Watts that the other existing muxes use.  So weaker signal  may not be being picked up by the dual tuner Youview bpx
http://www.ukfree.tv/txdetail.php?a=TQ339712
What signal strength do you get on your other TV ?

Similar Messages

  • Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

    Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
    and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
    Sorted by version:
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
    Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
    Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
    Microsoft SharePoint Portal (14.0.7015.1000)
    Microsoft User Profiles (14.0.7015.1000)
    Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
    Microsoft Shared Components (14.0.7015.1000)
    Microsoft Shared Coms English Language Pack (14.0.7015.1000)
    Microsoft Slide Library (14.0.7015.1000)
    Microsoft InfoPath Forms Services (14.0.7015.1000)
    Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
    Microsoft Word Server (14.0.7015.1000)
    Microsoft Word Server English Language Pack (14.0.7015.1000)
    PerformancePoint Services for SharePoint (14.0.7015.1000)
    PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
    Microsoft Visio Services English Language Pack (14.0.7015.1000)
    Microsoft Visio Services Web Front End Components (14.0.7015.1000)
    Microsoft Excel Services Components (14.0.7015.1000)
    Microsoft Document Lifecycle Components (14.0.7015.1000)
    Microsoft Excel Services English Language Pack (14.0.7015.1000)
    Microsoft Search Server 2010 Core (14.0.7015.1000)
    Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
    Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
    Microsoft Slide Library English Language Pack (14.0.7015.1000)
    Microsoft SharePoint Server 2010 (14.0.7015.1000)
    Microsoft Access Services Server (14.0.7015.1000)
    Microsoft Access Services English Language Pack (14.0.7015.1000)
    Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
    Microsoft Web Analytics English Language Pack (14.0.7015.1000)
    Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
    Recommendations?
    Thanks,
    Scott

    Thanks guys. I was able to get through all of the patches except for
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English   missing locally
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
    Spanish/Español missing locally
    This was my process:
    Config Wizard:
    Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
    SKIP installing the following two, as SP2 is cumulative
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
    install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Got "There are no products affected by this package installed on this system."
    SO!
    Uninstalled Sharepoint 2010 Server
    WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Retry (the long way):
    Run SharePointServer.exe, get Missing Locally...
    Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
    Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
    Reboot
    Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
    Rerun Config
    STILL MISSING
    Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
    Uninstall.
    Re-retried, only got through the first couple:
    Run SharePointServer.exe, get Missing Locally...
    Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
    Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
    Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
    Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
    I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
    Any suggestions greatly appreciated.
    Thanks,
    Scott

  • Missing facility: graphic channel mixer

    Hi Guys,
    I miss a graphic channel mixer so that I can reduce channel separation in
    problem zones, primarily the bass range when handling vinyl and shellack,
    but there may also be benefits for similar processing in the treble range.
    Kind regards
    Peter Larsen

    In the arrange window, check to make sure the check-boxes have been checked to display sends,pan etc etc etc.
    I'm not infront of logic right now so I cant be more specific.
    AD2

  • LOCAL Weather Channel 49

    What has happened to my local weather - channel 49?!!! If I wanted to watch the weather channel I turn to 119. Now my local channel has national weather information. My dad lives in southeast PA and said that it took two weeks before his local weather was restored. Please put it back to local weather! 

    Where are you located?
    If I remember correctly, the PA outage was due to a hardware failure.
    May be the same in your area.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Missing local name

    When I read my folder by java mail api,I encoutered the following message:
    MessagingException:Missing local name.

    MessagingException is thrown by 3 packages: javax.mail, javax.mail.event and javax.mail.internet
    Can you post your JavaMail lines of code and also the trailing error messages after the MessagingException: Missing local name line, so that we can further help you narrow down to the cause of this exception.
    I am suspecting that it has to do with get the hostname/ip address of the localhost of the machine that's running the VM.

  • Local TV channels

    Hi, I currently have Internet services only with Verizon FiOS.Since my TV is not in the best position, an indoor TV antenna is not working properly for us so I was exploring the possibility of getting the Local TV channels through Verizon. I know you can get the "FiOS TV Local" which costs $12.99/month, the question is:Does anybody know if Verizon encrypts these local channels? They've offered me to get the HD digital adapter for an additional $11.99/month but if they're not encrypting/scrambling the local TV channels then I shouldn't need that. Option B would be using the FiOS app for Xbox, in which case I know for sure I wouldn't need that adapter. Thanks!German

    Well.. I'm trying to add FiOS TV Local and even though they're not encrypting these channels they still require me to rent at least one STB. So, if I don't have a TV (just a computer) but I want to watch the local TV channels and buy the service from Verizon, you're obligated to rent a STB for an additional $12/month. I was actually planning on using the Roku player (as I don't have a coaxial outlet near the TV) so it's seems the only option is to rent the STB and leave it in the garage unplugged. I don't know why I was expecting something different from Verizon, all the cable companies are the same.

  • Local cable channel - no picture just sound

    I keep calling and emailing Verizon about the two local access channels that have no picture, just sound.  I can't get them to fix it.  How do I get Verizon to fix this problem.
    Thank you for your help.

    http://forums.adobe.com/thread/1195540

  • Can i play local radio channels on my i phone 3gs

    can i play local radio channels on my i phone 3gs without internet connection

    iPhones do not have a radio tuner to receive local radio broadcasts. 

  • Weather Channel Missing Local On The 8's and local weather info.

    I Have rebooted my box twice and still only get generic/national weather with no local info or maps for two days. According to the Weather Channel: "Your cable provider may be experiencing a technical problem with The Weather Star computer. The Weather Star is a piece of equipment located at your cable system that generates the Local On The 8s graphics for your area. " http://dw.weather.com/interact/contactus/localforecast.html Can someone please fix the box that generates the Local On The 8s graphics for the Claremont, NH area (03743)? Thank you!

     Well, it's either coincidence or someone is really on the ball - either way the local came back just 10 minutes after I posted the message above. Thanks!

  • Apparent missing clear (unscrambled) channel

    I have three TVs with QAM tuners connected directly to Fios (no STB).  As of 1/9/12, WCAU NBC10 from Philadelphia disappeared from all three TVs. Actually, the HD feed is still there (after a rescan I found it on my  Samsung TV  as 63-140), but the "mapping" information telling the TV tuner that it is virtual channel 10.1 seems to be missing (as well as all program info). The same applies to 10.2 (it is there as a clear channel but no map to 10.2).  All other local channels and sub channels are reported and mapped correctly, and continue as they have for the past several years. I don't really know if this is Verizon's problem of WCAU's, but OTA channel 10.1 is still correctly mapped from broadcast channel UHF 34 along with program data. Since the mapping is different for Fios, however, I suspect a Verizon issue. Can this be verified and fixed ?

    Did a rescan today and my HTPC can't find NBC.  It looks like this is a real screw up on the Verizon side.  Hopefully this is resolved soon.  If anyone knows who to contact to resolve this, please post a phone number or e-mail contact.
    A similar problem reported in NY with about the same time frame may be related: http://www.dslreports.com/forum/r26730800-NYC-area-WNBC-4.1-missing-

  • Here we go again- local HD channel going out going on 3 years now

    Was told to call the local manager {edited for privacy}. if the problem happened again and it has been.  The email reads as an invalid email address and his voice mail is not accepting calls because it has been full for the 2 weeks I have been calling. 
    Can someone at Verizon get me in touch with him?????????
    Problem:
    For the past 2 years I have had the local NBC in Richmond VA (WWBT Channel 12 on FIOS 512) affiliate occasionally goes completely black.  When I switch to the SD channel (12 on FIOS) the SD signal is always there.  I go back and the HD channel is still black.  If I am not watching and DVR'ing something, I will have various periods of black on my recording.  It will go back on it's own after a period of time when I am not watching and will come right back if I am watching as long as I power off the HD DVR to reboot. This has happened despite 3 HD DVR upgrades (started with the moto 6416, continued with the 7216, and keeps happening on my current 7232).  Never had a problem on my SD boxes because it is an HD signal problem.  Use HDMI and tried switching to component and had the same problem.  2 different brand HD TV's (Samsung and Panasonic) with same result.  Had the tech over a 4 times (replaced ONT once, other times detected no signal problems or connection problems) in the last few years.  Don't know what else to check as Verizon seems out of ideas.  Really getting tired of coming home hoping to see a DVR'd NBC program and finding it be black when I push play. 
    Still happening after last tech (Archie) came 2 months ago and replaced ONT (again) and the splitter coming in.  He said the splitter was a 4 branch and he put in a 3 branch. 
    Help!
    Ericvq

    I appreciate you may not be able to do some of the requests but maybe you can get some help from your son but in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Premiere Pro CS4, Missing #1 Audio Channel

    Running CS4, on Vista Ultimate 64.  P2 files
    The 1st channel of audio is missing.  I checked the footage on a separate machine, and it's all good, but on my PC, the wave form on the 1st channel of audio is blank.  When I 1st put the audio into the timeline, I could see the wave form, but as soon as I hit play, it went blank.  I tried to "adjust audio gain" and it crashed the program.  I tried to make a new project, and re-import the audio in stereo, but it only gives me audio on the R side of the 1st channel.  The 2nd channel is fine.
    Weird stuff.  Any hints?
    Thanks!
    Eric B.

    The Panasonic P2 format
    A  P2 card is a solid-state memory device that plugs into the PCMCIA slot of a Panasonic P2 video camera, such as the AG-HVX200. The digital video and audio data from the video camera is recorded onto the card in a structured, codec-independent format known as MXF (Media eXchange  Format). Specifically, Premiere Pro supports the Panasonic Op-Atom variant of MXF, with video in DV, DVCPRO, DVCPRO 50, DVCPRO HD, or AVC-I formats. A clip is in the P2 format if its audio  and video are contained in Panasonic Op-Atom MXF files. These files are located in a specific file structure.
    The root of the P2 file structure is a CONTENTS folder. Each essence item (an item of video or audio) is contained in a separate MXF wrapper file. The video MXF files are in the VIDEO subfolder, and the audio MXF files are in the AUDIO subfolder. XML files in the CLIP subfolder contain the associations between essence files and the metadata associated with them.
    Note: Premiere Pro  does not support proxies recorded by some Panasonic P2 camcorders in P2 card PROXY folders.
    For your computer to read P2 cards, it needs the appropriate driver, which you can download from the Panasonic website. Panasonic also provides the P2 Viewer application, with which you can browse and play media stored on a P2 card.
    Note: To use certain  features with P2 files, you first change the file properties from read only to read and write. For example, to change the timecode metadata of a clip using the Timecode dialog box, you first set the file properties to read and write. Use the operating system file explorer to change file properties.

  • Notes missing local folder

    Hi
    In Notes I missing my local folder I have only my icloud folder.
    Can anywehere helpe me, to get my local folder back.
    Thanks

    This is a possible workaround to create the local folder in notes.
    Use an IMAP Mail account with notes. Systemsettings - mail
    1. Activate the notes in the IMAP account.
         -> The local Folder will be created in your notes
    2. Deaktivate the notes in the IMAP account.
         -> The local Folder in notes is there.

  • Missing one audio channel from MXF video

    Greetings,
    I have a bunch of footage shot with a Canon XF300 camera. Two wireless lav mics were feeding into the camera. On the day, I was monitoring audio and am 100% certain that it was recorded correctly. I found a couple of unerased CF cards from the shoot and was able to verify that the audio is good when I pop the CF card into the camera.
    However, when I transfer the footage to hard disk and attempt to play it out using either Premier Pro CS5, or VLC, I'm losing channel one of the audio. I've been attempting to troubleshoot, and have found a couple of references on the Web regarding missing audio channel 1 from MXF video files -- but nothing that is relevant to this situation.
    I'm on Mac OS X 10.6.6 and am running Premiere Pro CS5 5.0.3. No video cards.
    I've tried bringing the files in using: Finder, XF Utility and ShotPutPro. I'm copying the complete directory structure in all cases.
    Has anyone seen this problem before? Any troubleshooting thoughts?
    Thanks,
    Cameron

    It turns out that the MXF files are coming in with 2 mono audio tracks, and for some reason, in the clip viewer, one of the audio tracks doesn't play, but if you move the clip to the timeline, both audio channels can be heard. Ran into the same issue with Cineform encoded material coming in with two mono audio tracks. So I'm going to file a bug report.
    Ah, OK... now I understand. No need to file a bug report; maybe a feature request, but a bug report isn't necessary. Here's why:
    When you bring in clips with mono channels, by default, you only hear the first mono channel when playing back in the Source Monitor. If you toggle over to Audio Waveform view (click the Output button), you can select which of the channels (called "Tracks" which is a little silly, frankly) you want to monitor. Here's what this looks like:
    This applies to any format that has mono channels. If you interpret the footage to stereo (you must do this before you use it in a sequence), you can listen to both channels at once. Of course, then you have to deal with the audio as stereo, which is not always what you want. That's why I do a lot of my editing with MXF material (primarily P2) that has multiple mic sources in a sequence, where I can monitor more than one source channel.
    In any event, that's why this isn't really a bug; it might be a poor design decision, but it's otherwise working correctly. I'd definitely suggest making a feature request for a "Mixed" or "Plus" audio source option in the Source Monitor. I'm going to do the same.
    Anyway, I hope that helps explain the issue. Good luck!

  • Local PBS Channels

    Will FIOS add WUNC TV (PBS) to the local Norfolk/Virginia Beach channel lineup?  We received both WUNC PBS and WHRO PBS via Cox Cable and are disappointed to see that WUNC is not on the FIOS lineup.  WUNC has excellent programming that is different than (and often more interesting) than WHRO.   jbsman

    ssetta - WUNC broadcast probably is technically part of, or shares the Norfolk/Va Bch DMA (defined as
    Norfolk - Portsmouth - Newport News, VA - NC DMA 23.1 91.7). 
    Both Cox Cable and FIOS carry WSKY which broadcasts from Manteo, NC, well south of here.
    To whom would I make a suggestion to carry this station?
    jbsman

Maybe you are looking for