Missing "Mapping entry" issue in tranferring Cust/Vendor Master Data

Hi All,
We are doing a version upgrade in one of our client for SCM APO (SCM 7.0 SPS 8). We are getting an error while transferring customer/ vendor master data (either in foreground or background) that "No location XXXXXXXX exists for mapping entry XXXXXXX of category 1011 (1010 in case of customer).
Please provide your valuable help to resolve this issue.
Thanks.

Dear Ravi.
Please use the report ZMATMAP_REORG provided in note 859650 to remove the inconsistencies between /SAPAPO/LOCMAP and /SAPAPO/LOC.
The number of entries in these both tables should be the same.
I am not aware of your SCM Release, but it is also relevant for release 4.1, despite the info in the note.Please copy the report in your system and execute it firstly in the test mode.
I hope this helps you!
Let me know the outcome of the issue.
Thank you!
Will

Similar Messages

*Journal Entries while uploading the vendor master data from legacy system*

hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

Hi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards

Issue with Vendor Master Data-field notes ID (Table ADRT-REMARK)

Hello,
I have a issue related to Vendor Master Data maintenance.
The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
Also please note that CATT/e CATT is not permitted at all the client level.
Can any body suggest the way to change the master data through some way.
Regards,
Chepan

Hi,
Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
If you have any questions I try to help you?
Best regards,
Piotr
Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

Vendor master data error - check issue manueal

Hi all,
i got the following message when i create vendor master data, same message as error when i try to post manual check.
" Changes for vendor 500011 not yet confirmed
Diagnosis
The change to sensitive fields of vendor 500011 have not been confirmed yet.
Procedure
You can confirm the change with transaction FK08."
could any one give me the solution ple
thanking you

Dear,
If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
With Best Regards,
Gladys Xing

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Gaps in vendor master data number range

Hi, we have noticed there are sometimes gaps (missing numbers) in the internally issued vendor master data number range. Does anybody have any idea why this happens and how to avoid this?
Many Thanks for your answers!
Lucie

Hi Lucie,
This happens due to buffering of the number range in question. You can go to SNRO transaction (object KREDITOR) and change the buffering options (deactivate them, actually). Please, consult your ABAP team before doing this. For more info, see note 62077.
Regards,
Eli

Vendor Master Data Archiving

Hi,
I wanted to archive vendor master data. I got program - SAPF058V which gives FI,Vendor Master Data Archiving: Proposal list.
This program checks whether and which Vendor Master data can be archived or not. I am getting error message after running this program with selection of one of the Vendor saying that "Links stored incompletely". Can someone pls help on this
Thanks...Narendra

Hi,
Check if you have an entry in table FRUN for PRGID 'SAPF047'. Other option is set the parameter 'FI link validation off'' with the flag on (ie: value 'x'). Check the help for this flag, surely this vendor have a code of customer. Perhaps you must try to delete this link in customer and vendor master before.
I hope this helps you,
Regards,
Eduardo

Vendor Master Data - General and Company Code Data

Hi,
We are collecting vendor master data requirements. The requirements that I have are for Vendor General Data, Company Code Data (Accounting Info, Payment Transactions, Correspondence etc.) and Purchasing Org Data. Out of these 3 groups I can only see Vendor General Data that is mapped to CREMDM04 in SAP supplied syndication maps. I am wondering if someone could tell me how much effort is involved to first create the structure in MDM for Company Code data and Purchasing Data and then map these additional fields to CREMDM04 fields?
Why is it that Company Code data and Purchasing Data is not mapped in pre-delivered syndication maps?
Thanks in advance,
M

Thanks Shruti for your reply.
I agree with you. However, our client is really pushing for Company Code Data and Purchasing Org data along with Vendor General Data. Now, this is something that is new to me to do. I have never done this kind of customization before.
I would really appreciate if someone from SAP could give me their recommendation and also help me answer the following questions
1. Is this doable to map and syndicate Company Code data and Purchasing Org data along with Vendor General Data
2. Is it possible to then extract the tables that hold Company Code data and Purchasing Org data from ECC and bring it back in MDM to update MDM tables (that we are going to create for this data)?
3. What's the effort involved in this customization (Considering that we will be extending our repository structure, extend the syndication map, extract new tables from ECC for MDM, create import maps for these tables to import Company Code and Purchasing Org data into MDM)
Regards,
M

Vendor master data upload

how do we upload vendor master data into SAP from legacy system.can anyone give me a detailed explination.
regards,
deepthi

Deepthi,
The steps would be (in LSMW) :
1 Create a new Project, Subproject (if not existing). Then give a name for the Object, say VendorMaster.
2 On the next screen, you will see several steps (radio buttons) to be performed. You should go in sequential order.
Double click the first, I think its called Maintain Object (sorry don't have access to SAP system right now)
3 On this screen you will see various options/methods (in the second section) for loading the data.
You may select which ever is appropriate or most suitable in your case.
Let's assume you want to use the very first options - Standard program for Direct Input/Batch.
4 Pull down (F4) for the Object & select Vendor Master.
5 Pull down again for the Method & select (I think( Standard). The program name & Type will be populated by LSMW.
If let's say none of the programs in this list satisfies your requirement, then you may decide to go for a Recording or a BAPI (again pull down & select appropriate method) or IDoc (CREMAS).
So now you have decided on the method you want to use for posting the Vendor Master data. Save the information & go back to the main screen of the object.
6 Double click on the next step for maintaining the Source Structure. Give the name(s) of the Source Structure(s).
7 Next step is to define the Source Structure(s) format (fields, attributes etc).
8 Next you maintain the relationship between the Structure(s) - Source & Target. The Target structures depend upon the method elected by you in step 5.
9 Next will be the most important step - ie specifying the mapping/conversion rules for each Target field. You can even write ABAP code by double clicking on the field - it will open up the editor where you can put in your ABAP code. There are also several events available - for instance at the <i>Beginning of Processing</i> or <i>Beginning of Transaction</i> etc. where again you can specify your own logic.
10 In the Next 2 steps you will give the file name & path & also associate the file(s) to the Source structure(s).
The develoment for the object is complete. Now you are ready to read, convert & post your Vendor Master data in SAP.
Let me know if you need additional assistance.
Regards,
Homiar.

Vendor master data-name 1 40 or 35 characters?

Hi,
In vendor master data, field name1, the data element show it has 40 characters, but in LFA1, the field length is 35.
If I key in forty chaacters, and save, it is successful, go back to see it, it really display 40 characters, but check table:LFA1, I see only 35 characters, where other 5 character store? what is the logic of this?
Thanks.

Message no. AM228
Diagnosis
The address data maintained in field NAME1 occupies 40 of 40 characters The last 5 characters of the field NAME1 can be used only with restrictions.
System Response
In this form the data can be saved and used up to the complete length of 40 characters.
In some scenarios, the system only uses the first 35 characters of name fields, of the fields 'Street', 'City', 'District', as well as the first 10 characters of the field 'Search Term 1'.
These cases are:
ALE: the address data can only be transferred with 35 characters (search term 1 only 10 characters) in the case of some ALE message types (IDOC types) for reasons of compatibility with other releases and components. The message types in question are:
DEBMAS
CREMAS
DEBCOR
CRECOR
The problems do not occur if the relevant address data in IDOC ADRMAS is sent in each case, together with these message types.
EDI: the address data can only be transferred with 35 characters (search term 1 only 10 characters) with the standard UN/EDIFACT for reasons of compatibility.
Print: addresses are formatted with only 35 characters in some print forms for standard envelope windows. If the address number is in the address output structures, you can output the address fields in full length in forms. (See OSS note 145753 for FI forms.)
Procedure
If you do not want the address data to be truncated in these scenarios, only use the first 35 characters of the name fields, of the fields "Street", "City", "District" or the first 10 characters of the field "Search Term 1" during maintenance, or abbreviate the texts, if necessary.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number

Vendor master data change confirmation -Report Y_CD1_39000398

Hello All,
In report Y_CD1_39000398 we can see the confirmation pending for the Vendor master data changs. There are some entries which are pending since last 5 years becasue the chagnes are rejected. Is there is any possibility to remove this so that in this report we can get only relevant entries
Thanks & regards,
Prashant

Hi,
I dont think it is the standard report. I think its a developed one as it is starting with Y. If so, then co-ordinate with your abaper and do the necessary changes to get the right result.

Vendor master data details

Hello Friends,
i have one requirement like...
We need a download of Vendor master data details with the following data:
1) Company Code
2) Vendor number
3) Vendor Name
4) Vendor country code
4) Bank key
5) Swift code (BIC code)
6) Bank account
7) IBAN code
i have tried to develop one report in SQVI transaction. i have taken tables LFA1,LFB1,LFBK.BKNA and TIBAN.
But i could not able map Bank account number between the tables BKNA and TIBAN.
Could you please help on this topic...
Regards,
Satya

Hi,
BNKA is the table of banks, not bank accounts; it doesn't contain bank account numbers.
You will find swift code in BNKA-SWIFT
with keys
BNKA-BANKS = LFBK-BANKS
BNKA-BANKL = LFBK-BANKL
and IBAN in TIBAN-IBAN
with keys
TIBAN-BANKS = LFBK-BANKS
TIBAN-BANKL = LFBK-BANKL
TIBAN-BANKN = LFBK-BANKN
TIBAN-BKONT = LFBK-BKONT

Vendor Master data problem?? urgent please

hi,
i am trying to populate the vendor master data(name) into the cube. but the data is not there in /BI0/TVENDOR table. what could be the problem? what should i do to populate the NAME in to the cube. i have done transformations in update rules with 0VENDOR.
regards

HI Venu,
If u want to use that characteristic in the cube and if u want to load the data to that characteristic then make that characteristic as a exclusive attibute and use that characteristic in the cube and in transformation give the mapping with read master data.. remember this will give u the fact but not the present truth.....
If u just want to display that vendor name as characteristic and which u dont want to depend on the main master data object then make that object as a navigation attibute....
Khaja

Payment done without confirmation of vendor master data

I have an issue with sensitive fields. A payment was done without confirmation of vendor master data.
F110 , FK09 transaction is used.
Without approving the payment, it is cleared. Although it should show Account blocked for payment run.
Are there any notes which can be applied. This is 46C system?

check view V_T055F
and read docu to tcode FK09!
A.

LSMW Upload vendor master data

I am uploading vendor master data via a batch input in LSMW (program RFBIKR00).
I uploaded all the vendors for 1 company code.
When I try to upload the vendors for another company code, in the step Create Batch Input Session I get the error: Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed.
When I try to manually create a vendor for another company code via tcode XK01, I have no problems. But when I create an existing vendor manually for another company code I dont have to add the information which is contained in table lfa1.
Therefore I tried to upload the vendor, which has to be created for the company code, with a / in the data for table lfa1. But this doesnt work.
Has somebody a suggestion to solve this problem?
Thanks

In the similar thread you said:
"If the vendor exists in LFA1 but not LFB1, use XK02 with the structures for LFA1. Then use XK01 with the structures for LFB1."
It is not possible to use XK02 in order to create the vendor for another company code if the vendor already exists with a certain company code. You will get the error "Vendor xxx has not been created for company code yyy".
The problem is that LSMW requires a mapping onto structure LFA1, but when the vendor already exists for a certain company code, LSMW returns in the step "Create Batch Input Session" the error: "Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed".

Missing "Mapping entry" issue in tranferring Cust/Vendor Master Data

Similar Messages

Maybe you are looking for