Missing Master Data in BW

Hi,
In BW 3.5 I'm not able to see custom entries in master data.
In ERP for ChartofAccts we have a custom entry - 0010
I can see this entry in RSA3 Txn.
But i cannot see this MasterData entry over in BW.
is there any custom setting i'm missing.
Thanks in Advance,
Pat.

Hi Kenneth,
Masterdata is activated in BW and in ERP.But still i'm not able to see only the custom entries remaining master data i'm able to see.
In RSA3 transaction i'm able to see both all values of master data.
Thanks,
Saritha.

Similar Messages

  • Missing  master data for Account number Delta

    Hi,
    I am working on production system,Some records are missing master data(attributes street,city for Account number  for starting with Account number   9xxxxxx) for Delta load,Field lenguth is 10.these Missing  records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number   9xxxxxx.
    Please help me whats the problem,where can i find related info.how to fix this issue.
    Is there any delta setup problem
    This generic data source ,pulling from table ADRC….numeric pointer.

    Hi ,
    Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
    please post your reply to proceed further
    Cheers,
    Swapna.G

  • Missing master Data

    Hi !
    I have found that a master data value was missing . Then I have loaded the with selection in infopackage for that value . Now data is appearing . Can you tell me the reason of a missing data ?
    Now the data is visisble in P table , T - table but it is missing when i am seeing that master data infoobject in listcube tcode
    Please suggest .

    Hello Rajib,
    P table can have data even in the case of full load...
    The issue comes in the case when delta is scheduled and the logic needs to be complete to capture all kind of delta generated...there could be delta getting generated for the some reasons which you have not included into the delta logic...this is the case with the generic data sources.
    If it is a standard extractor and if you missing records then we will have to look into other aspects.
    Thats why I have asked you give more information.
    Thanks
    Ajeet

  • Master data dependency

    Dear Gurus,
    I have master data being updated several times a day every day.
    Transaction data is also updated every hourly.
    What happens if at time of loading transaction data, no master data is present for the transaction data? Does it mean missing master data will get updated by the transaction loading? Or missing master data required by the transaction data leads to data not updated?
    Regards
    Suzie

    If you have update rules that read master data to put those characterisitcs into the cube then you will have blanks into the cube and you will need to relaod the ODS to the Cube once the master dat ais updated
    If you don't then don't worry the next load of the master data will populate the master data tables - the cube will then link to the master data automatically
    it's only the look ups you really need to worry about
    if you do have look ups - then think about doing the lookups in a cmod on the transaction datasource side

  • Error Caller 70" is missing while loading master data

    Hi All,
    I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1  data pakage is showing with red color, its update till only PSA .
    Please help me out to solving this issue .
    Thanks in Advance
    Sandhya

    Hi,
    check the below links
    caller 70
    Re: Caller 70 error
    caller 70
    Hope this helps

  • Master Data missing

    Hi
    I have created a report over Vendor Master Data. The problem what I am facing is I am unable to find data for some attibutes (that too for some Vendors particularly) and also there are no conditions or restricitions in the Query.
    Can anybody tell whats the problem.
    regards
    Mahi

    Hi,
    Check if you have loaded the data for those missing attributes as well in the system.
    Amit

  • Missing Tax information of Customer Master data

    Dear all,
    I have an error with Customer Account Group. I create a customer account group as Z001 (Domestic customer). After that, I go through Financial Accounting - Account Receivable and Account payable - Customer Account - Master Data - Preparation for Creating Master Data -Define Account Group with screen layout (customers) (also with Define Screen Layout per activities). And for Control Tab, I set all items are optional. But when creating Customer master data for this group, when going to SALE AREA DATA, Tab BILLING DOCUMENT, I found that the Tax information part is missing.
    I try to set all items are optional, but can't resolve this problem. Can you help me ?
    Thank you very much for your help,
    Sylvecat.

    Hi
    Goto TCODE : OVK3 and maintain the Customer Taxes
    Path : SPRO > Sales and Distribution > Basic Functions > Taxes > Define Tax Relevancy Of Master Records
    VVR

  • Master Data is missing for Specified Matierials at cube level  !!

    Hello Experts,
    Good Day..!!
    I have been facing an issue in my project,  Master Data is missing for a KF and values are not displayed  in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
    Intially, i checked from Cube End and found the issue is in Cube level only.
    For that in the data flow, i already checked whether the data has been loaded perfectly or not.
    Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
    Kindly advice how can i move further..
    Thanks,
    SN.

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Customer master data table KNVV is missing

    Hi All
    I a trying to cancel the billing document using transaction VF11. System shows error as " customer XYZ customer master data table KNVV is missing"
    Please advice how to proceed?
    Thanks and regards
    satyaprasad

    Hi,
    Goto the T.Code "Se11/SE16".
    Enter the table name as "VBRK".
    Enter your invoice number.Execute.
    Check the value of "VKORG(Sales Organisation)","VTWEG(Distribution Channel)" and "SPART(Division)".
    Or you check the same in "VF03" screen also.
    Make a copy of the above three fields.
    Goto the T.Code "Se11/SE16".
    Enter the table name as "KNVV".Enter your customer number in "KUNNR" and the values of "Sales organisation,Distribution channel and division" into their respective fields.Execute.
    Check if there are any entries.The result should be no entries so that only you will receive this error message.
    If you created the customer with out sales area,while creating the order only it will give you an error message as "No customer master record exists for sold-to party XXXXXXX
    Message no. VP199".
    As the partners are defined in sales area data only.
    Regards,
    Krishna.

  • 0calday master data missing for 2015

    Hello
    I am having a problem with 0calday master data.
    How is this defined?
    In the development system I can see that it is only contains values up to 01.02.2015.
    How can I define this for future values as well.
    I have an IP solution which opens up for time registration on every day. But since 01.02.2015 has passed it will not open up for entering data, since master
    data is missing.
    Where are these values maintained?
    Thx for any input which can lead me to a fix of this urgent issue
    BR
    Lasse

    Hi,
    The problem also occurs in prod system
    But strangely enough it works in Q system.
    The difference between the system seems to be the length of 0calday masterdata, which is used to derive 0calweek (as of my understanding).
    There is no regular flow for loading master data i 0calday. (not the same as for e.g 0customer with attributes, hierarchy, text  ).
    Where can I check the time horisont for which 0calday is defined? I find it strange that it for prod it ends at week 09.2015, for dev it ends at 05.2015 and for q it ends at 09.2018.
    There queries and flows in BW is in-sync for all 3 systems.
    You mention FI team. Could this problem originate from R/3 source system?
    prod
    quality

  • Some segments are missing in the idocs for master data zdebmas

    hi guru's,
    can any one hlep me here we facing the probelumm
    some segments are missing in the idocs for master data zdebmas
    , there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
    This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
    There is  some segments below is missing in the IDoc:
    how to chcek this probelumm...

    hi
    i got the function module. it is  triggerig whne i do changepointer running.
    what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
    my req is to show all segments  even if i do changes in one segmet fields  dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
    can u plse help me the login  or any function module which will fill the alla the segmetns .

  • Master data Lookup missing for sold to party

    Master data Lookup missing for sold to party?
    The look up flow is from E_BOM to E_BOM1
    regards

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • 0distr_chan initial master data load, text missing

    Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
    0distr_chan attibute is OK.
    I am also having problems when loading 0salesorg on text. It fails also.
    Can anyone give me a clue?
    Thanks!

    Hi, thank you for your answer. I am new to this system. Please give me more guidance.
    To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
    thanks!

  • Missing authorization check to display master data error..

    Hi,
    We are in SRM7.0.
    After adding content in my shopping cart, I am trying to change the Account Assignment in the Item Details from Network to Cost Center or GL Account.
    Under Item Overview, after changing the Account Assignment to Cost Center, I go to "Assign Number" to add a Cost center..On clicking the matchcode search box,  I get selection entries like Cost Center, Controlling area etc..If I click on the Search box without keying anything, I get a "Missing authorization check to display master data error".
    I get the same error, when I try to select Assets under Account Assignment area and use search under Assign number. I dont get any errors on searching networks.
    Am we missing any authorization check in the backend ?
    Regards,
    Rajan.K

    Hello Rajan,
    You could use transaction ST01 in SRM to perform some 'authorisation' trace.
    It might give you some pointers to the issue.
    Regards,
    Franz

  • Missing some master data for delta load( its very urgent please)

    Hi,
    I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
    the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
    Address Number/     Addr Ln 1 Txt/     City Dstrct Nm
    9025750333/                      #/               #     
    help me its very urgent

    Hi Sumanth,
    check the delta queue and the V3 job is it running correctly ,
    Have a look at OSS note :728687
    and also see the following thread
    Deltas are not available in Delta que
    Delta Queues are not cleared in R/3
    No data in RSA7 for 2lis_03_bf : HELP
    check the data may b it is in modifide status not active.
    regards,
    supriya

Maybe you are looking for