Missing Media content

Every since I turned on icloud I have had nothing but trouble. I went to workout this morning only to find out that all my P90X videos I had loaded on my phone are just....Gone. I certainly didnt remove them from my phone. This cloud thing is nice in some ways, but it's infuriating to get someplace and not have my content as I loaded it. I want my content to be shared between devices, but also want to get at it regardless of whether I am in a WiFi network or not. Is enabling the cloud what is responsible for content not being available in device memory? If this is the case, how do I stop this?

iCloud has nothing to do with synced media. Are you talking about iTunes Match? That's only for music and has nothing to do with videos so far as I am aware.

Similar Messages

Get media content now

Received my Lumia 920 a week ago, I have been fighting with Vodacom in South Africa for 5 days now around getting MMS working. Vodacom say its Nokia who have to provide me with the MMS settings but I cannot find any solution to getting MMS working on the Vodacom network. If I try send a MMS, I get an error saying my message cannot be sent and when I receive a message it says "Get media content now", if I click on the message, the phone reports "getting media content" it plays a sound but nothing further happens, I then receive repeated notifications saying "Get media content now" about 10 or 15 times over a period of an hour, any help would be appreciated

Did you check the Settings>access point? In many cases the correct settings are in the app database an will setup automatically. You might want to do a search on these forums as this has been covered many times before. If this app is missing scan the QR code below on your phone to get it.
On the vodacom site they only offer sending a settings SMS or using USSD, both are not supported by WIndows phone (you could try the SMS option though). These setting are carrier dependent and so should be provided by the carrier.
A quick look at settings for the Nokia C7 I found this and that should translate pretty well to settings for Lumia:
Connection name: Vodacom
Internet APN
Accesspoint name: internet
Proxy address: 169.006.128.012
Proxy port: 8080
Username: [blank]
Password: [blank]
MMS APN
MMS Access point name: mms.vodacom.net
Proxy address: 169.006.128.013
Proxy port: 8080
Username: [blank]
Password: [blank]
MMSC address: mmsc.vodacom4me.co.za
They should have the settings available for manual entry just like any other carrier has. If the above does not work contact them again and demand to speak to a manger as they should have these settings and it seems you ran into a clueless agent here. As this is basically Vodafone you might try and shoot their HQ a message to complain on this.
And lastly remember; Google is your best friend in these matters..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..
Attachments:
qrcode.png ‏1 KB

"Get media content now" without data connection?

Hi all.
I have a prepaid sim in my Lumia because I use it very little. When I got my Lumia charged and running 2 weeks ago, I had the equivalent of over $240 credit on my SIM card, "Data connection" was switched on and once the Lumia was running, I sent one single text message with the word "testing" to my daughter. Next day I was horrified when my provider sent me a message "you have less than 10 Francs credit". I called Swisscom and they told me that the day before, my Lumia had gobbled up more than the equivalent of $150 and that THAT day so far it had used up over $80. I felt absolutely sick. Normally 100 Swiss Francs lasts me for a year.
They told me to switch off the Data connection and just use wifi. But now, when my daughter sends me a picture, I just get that blasted "Get media content now" message.
I simply cannot afford the data connection. I could get images and multimedia content messages fine with my late departed and much-missed E7 and even my old Communicator could pick up multi-media via wifi. so why the step back with the Lumia ??? And is there any way I can get e.g. multimedia images without a data connection (I already tried the aircraft mode on/off trick with no luck).
Our entire family have been Nokia customers since they first made mobile phones but by now I am the only one of us who has persevered (thanks to the Communicator then the E7) but I hate this bloody Lumia 900 thing which I received as a replacement for my non-charging E7. I swear I am going to put it on ebay and get myself an Iphone and will never buy a Nokia again.

The 150+ SFr was presumably from a phone software update. I didn't send an MMS message but an SMS = one word only.
I checked that the wifi icon was on at all times but the Nokia seems to look first for G3. Because Nokia didn't even have the courtesy of sending me a manual or user instructions of any kind (or charger or SIM removal pin or headphones) when they sent me this phone, I didn't think of checking the data connection setting to be honest.
Last night I wasted a further 7 hours trying to install Zune on my XP PC.. It said it couldn't install because Media Centre needed updating to Rollup 2 or later. I already HAVE all the Media Centre updates, went to Microsoft, wanted to download it again, they wanted verification but when I ran their verification tool I was told that the verification tool was outdated and to use the later version - yes, and that on the Microsoft website..
After 7 hrs of going round in circles, I went to bed at 5 a.m. and today went to Swisscom and got myself an Iphone 4. I have better things to do than to spend 7 hours trying to install software..
OK, it's another rant but I am mightily dissatisfied with Nokia - even the keypad keeps rolling itself up when I try to enter something. so to enter a 10 digit phone number takes a total of about 30+ taps because the damn keypad disappears before I can tap on a number. Incredible.

When sharing project to iTunes I get an error message "missing media"

Mac Book Pro OS10.9.5 Imovie 10.0.5 Storing library on external hard drive. Only opening iMovie from the library in the hard drive. Working fine other than problem below
Have a project that I tried to share to iTunes and it states there is missing media and if I continue that media will not be included. How can I find out what is missing?
I see a Yellow error triangle symbol in the heading of the title, but is is not a link to anything and does not direct me to anything and I don't see that symbol anywhere else. Project appears to play just fine. When I exported to iTunes - the intro of my video is missing. Which would be logical to think that is the missing media - however, I shared another project at the same time that did not give me the error and did not have the yellow triangle symbol and it too is missing the intro??
I did copy the intro from the problem free project and pasted it into the project with the problem above. I also copied an pasted a few other sections the same way and those sections are not missing in the iTunes export.
I exported to file and saved to jump drive and opened from there - no problems - all parts there.
Maddening. Anyone have a fix for this. Help appreciated. Thanks

I seem to recall that this may be cause by overloading the USB bus (lack of power to go around). Shut down your computer. Reset the iPod shuffle using this procedure.
http://support.apple.com/kb/HT1655
Disconnect ALL peripheral USB devices, including keyboard and mouse. Power up the computer. If you need your mouse, connect it and launch iTunes. Connect the iPod shuffle to a direct USB port and try the sync again. See if there is any difference.

How can I export an iMove Project if the Event file was deleted? (Missing Media error message)

Deep iMovie question:
I accidentally deleted various EVENT files from my iMove EVENTS folder. Yes, they are really gone ... this is NOT a matter of restoring them from the trash.
The projects are still there ... I can still watch the projects as long as I am in iMovie ... but if I try to export the Project I get the MISSING MEDIA error message.
Logic tells me that if I can view the project ... the file has to be SOMEWHERE inside my computer ... else I couldn't be watching it ... right? I mean what am I watching if not some file somewhere which has moving pictures stored in it?
So HOW do I get to something I can export? What am I watching when I watch the project?
I have iMove 08 on iMac with OS 10.6.8
Normally works great for my simple needs ... except if you move or delete an event file ...
Can anyone out there help?
thank you,
Natasya

If you don't have the original files then I'm afriad you don't have anything to work with.
Regards
TD

IMovie won't export "missing media" and now won't import archived footage either?

Hello,
I made a movie in iMovie 10.0.3, and tried to export it to "file". It came up fine in the Theatre, but when I exported it to "file" a message about "missing media" came up, and when I tried to play it (tried to burn it to DVD), a further message about "quicktime not recognising the format" came up. It was saved as an mp4 file. I thought I would try and delete all the original footage and reimport it from the external HDD (where it was saved as archived footage), however when I plug the HDD in, the previously imported clips don't come up. I've emptied the trash to try and help (clutching at straws!), and was wondering if anyone could offer advice on how to a. export the movie successfully or b. reimport the clips so I can make the movie again (long and tedious, but possibly the only way?).
Thanks in advance.
ps this is my first time posting, so please be gentle with a newbie!

Found the solution myself! All I needed to do was turn off the Time Machine. I have no idea why it does that. Finally, I can use iMovie again! Apple should really fix that though.

Missing media in finished DVD but not missing in Timeline

Dear Gurus and others-who-know-far-more-than-I-do
In my latest video, exported from PPro (CC 2014) via Media Encoder and Published with Encore CS6...my finished DVD has a number of red "Missing Media" spots, but going through the PPro timeline there does not appear to be ANY "Missing Media". I've never had this problem before. Any ideas, anyone?
Regards
Roy

Please do not EVER download a codec pack !!!
Some people who have done so have then had to wipe their hard drive and install fresh to fix the problems
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
What you LIKELY have is an issue with the MJPEG codec... so IF that is what is inside your file, read...
MJPEG http://forums.adobe.com/thread/730396

Missing BI content datasources

Hi all. I have an issue... I'm trying to activate some BI content datasources, but there are missing a lot of them. Do somebody knows why?
Here are my system status:
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
BI_CONT 703 0009 SAPKIBIIP9 Business Intelligence Content
Note: It only happens in my BW DEV system. In BW QAS (same installation) there are all the missing datasources.

There have not many BI content datasources in BI.
If you are considering ERP data source, you should check RSA6 in ERP/QAS and Compare it with RSA6 in ERP/DEV.
Transport all datasources in interests from ERP/DEV to ERP/QAS and replicated them to BI/QAS at once, and you will find the missing BI Content data sources.
hope it can help.
regards,
K

Safari will not display some media content despite Flip4mac loaded

As the subject indicates, Safari will no longer display some media content after installing Flip4mac. Where that media content would normally display all I see is a square with the Quicktime logo in the middle and a question mark in the middle. For example see the Dakar Rally site http://www.raid-live.com/dakar/en/index.shtml#. In my case Safari does not display the Flash content relating to "Premium Offers".
Mozilla displays everything fine though I don't particularly want to move between browsers depending on the on-line content. I'd rather not use Mozilla as in some cases the page appearances aren't as neat as those displayed by Safari.
Is there a way of restoring Safari back to its default settings in order get it to play ball.
Cheers
Chris

Also a possible explanation is Safari cache files. Safari can be quite stubborn about holding on to these and refusing to let go of a cache file for a page, not showing up-dated content. Since the new user account didn't have any cache files Safari displayed the file correctly there, and used a "bad" cache file in your original account. Even clicking reload doesn't necessarily force Safari to take a new look at the page code. Drives me batty sometimes. If that is the problem you can go to the Safari menu item, choose Empty Cache and try again. I'v had instances though where I had to empty the caches and quit and relaunch Safari to get it to display a page properly.
Another thing to do, to make sure something is a Safari specific problem rather than a system problem, is to download Firefox and try it with a funky page. If the page works in Firefox, but not Safari, you know it is Safari being funny and not your system.
My truck was running rough the other day when I moved it to wash it. Was not looking forward to using it to haul stuff the next day, but when I started it then it worked just fine....
Francine
Francine
Schwieder

Hi, I am not able to restore my ipad (I have tried different techniques but it stays frozen at the Apple logo level). If I try through my computer, it forces me to reset factory settings erasing my Media content which I haven't backed up. Ideas please?

Hi, I am not able to restore my ipad (I have tried different techniques but it stays frozen at the Apple logo level). If I try through my computer, it forces me to reset factory settings erasing my Media content which I haven't backed up. Ideas please?

Hmmmm.... you might know the answer....

Cannot locate missing media

I cannot locate missing media. When I try to locate it, and browse my computer I cannot find it

Have you deleted or renamed any directories on your computer, and you've checked the recycle bin/trash can in case they are in there ?
If it's not on your computer then do you have a backup of your library that you can copy the missing items back from, or do you have them on an iOS device to copy them from ? You can copy iTunes purchases back from a device via File > Devices > Transfer Purchases, or you might be able to redownload them via the Purchased section of your account (whether you can redownload them depends upon your country, the type of item, if they are still in the store, and if you've moved countries since buying them) - on the current version of iTunes (iTunes 12) click on your id towards the top right of the iTunes screen and then click Purchased on the popup :
For both copying back from a device and redownloading you will need to delete the entries from your iTunes library (where you are getting the 'unable to locate' message) for iTunes to allow you to do copy/redownload them.
To copy back from a device media that wasn't bought from iTunes you will need a third-party program on your computer to copy them back : Recover your iTunes library from your iPod or iOS device
Missing items : iTunes: Finding lost media and downloads - Apple Support

Media content upload download

Hi,
I am quite new to the iPhone development. My requirement is to create an app which should be able to upload/download/tag a specific media content - image, video or audio to a Ruby on Rails based social networking
There could be two solutions
1. Standalone app - using the underlying framework APIs.
Does the standard Foundation framework's underlying HTTP Connection object support uploading / downloading of videos/audios? I found a Ruby Cocoa framework in the library though.
2. Can I enable my website to for iPhone so that the browser itself takes care of upload/download of the content
Would greatly appreciate pointers on this
Thanks in advance

Using NSMutableURLRequest and NSURLConnection one can do POST and GET requests to a web service. These classes abstract all of the set up so simple requests are easy to do. For more complicated requests you have the ability to programatically set or adjust the HTTP header fields. NSURLConnection can be used in either synchronous or asynchronous modes. The latter allows you to make network requests without all the bother of creating and managing threads but still keeping your UI from blocking on the request.

SP23 missing BI content when processing EWA data

Hello,
In a recently upgraded solman system i am trying to process downloaded EWA data. For this a batch job SM:EXEC SERVICES is scheduled.
This job cancels however with message InfoCube 0SMD_PE2D is not available in version A.
When I search for this infocube in RSA1 i do not find it, so it seems I am missing some content.
Is this true? Or am i doing something wrong here?. Do I need to activate some ehp1 funtionality for this?
Thanks for any help
Tom

>
Tom van Rooyen wrote:
> One error at least was that in SOLMAN_SETUP the BI activation failed because the myself source system was not present at the time. Still the job went technically OK, which is not good practise
Tom,
Could you please open a separate thread in SDN or open a customer message on SV-SMG-INS to discuss the expected behavior within SOLMAN_SETUP.
I would also appreciate to avoid running into issues during EWA processing. Detection should have been possible earlier for users.
Thanks,
Ruediger

How do i reimport missing media

While importing media files to FC, some of the files did not import correctly. How can I re-import only those files? Is there a way to batch import the missing media files if I select them?

Improted from where? Camera? Try the reimport from camera function. Yes you can import multiple clips selectively.

False positive critical alert from OEM: number of missing media files is 7

Hi all,
We were a bit stunned here as we got a page from OEM that the number of missing media files is 7! We ran the query only to find that there are none missing. One of the SR. DBA's said he thought he remembered seeing this months ago and it cleared itself soon after.
SELECT COUNT(FILE#)
FROM V$DATAFILE_HEADER
WHERE RECOVER ='YES'
OR ERROR IS NOT NULL;
After running that to verify the count is 0 (no missing files or corrupt files) I then looked in OEM at the alert and clicked the hyperlink to the graph that shows a spike to 7 then immediately went away so I assume this is some but in 10.2.0.4?
Thanks,
Dave

Missing Media File Count metric represents the count of missing media files.
You can remove it from monitoring template if don't need.
Here is with screenshots demonstrated that:
http://www.oracle.com/technology/obe/obe10gEMR2/Quick_Start/system_monitoring/system_monitoring.htm
But basicaly under this message is select:
SELECT count(file#)
FROM v$datafile_header
WHERE recover ='YES' OR error is not null;
Do you have any rows returned?

Missing Media content

Similar Messages

Maybe you are looking for