Missing Media Manager after 4.3 Upgrade

I had Desktop Manager 4.2 SP2 installed on my laptop, and Media Manager was installed and working. I upgraded to Desktop Manager 4.3 and now Media Manager is not there. I checked another PC that has Desktop 4.2 SP2, with Media Manager and it still works for my device. Have I done something wrong? I have a BB 8700c through AT&T. I am running Windows XP. I have already tried a Repair and a Reinstall.
Thanks

Well, that certinaly should have it. It may be an older install was corrupt and hasn't uninstalled properly. This document references an older version of the Desktop Manager, however its steps are still relevant when removing files:
How to perform a clean uninstall of BlackBerry Desktop Software

Similar Messages

Media Manager - After Effects - Quality

Hi,
I'm not exactly sure where to ask this, so I'm asking here.
I'm editing a ProRes 422 sequence in Final Cut. If I 'copy' media using Media Manager, getting rid of the unused portions (while keeping 2 sec handles), will there be a loss of quality in the newly produced clips?
Also, If I correct one portion of the image in After Effects CS5 (such as removing an object in one small part of the image) and export to ProRes, will there be a quality loss in the parts of the image that were untouched?
Do these processes affect the untouched portions of the clips or are they identical to the original?
Thanks for any information.
Matt

If I 'copy' media using Media Manager, getting rid of the unused portions (while keeping 2 sec handles), will there be a loss of quality in the newly produced clips?
Shouldn't be. This is just a COPY but within parameters. ONLY THIS PART OF THE CLIP. No recompression. But don't take my word for it. TEST it. See for yourself.
If I correct one portion of the image in After Effects CS5 (such as removing an object in one small part of the image) and export to ProRes, will there be a quality loss in the parts of the image that were untouched?
Slight loss of quality in the WHOLE image, as you are recompressing. And you won't just lose it in the area you are treating, but the WHOLE clip. Because you are exporting the whole clip. But ProRes is designed to hold up to 10 recompressions before you can see it. Again, test and see for yourself.
Shane

Missing Media Manager

Phone: Curve 8310 dumbphone with AT&T specific Desktop Manager software
I can't seem to transfer audio or video files to the phone. I don't even see a logical software path to follow. Everything I read on this says to use the Media Manager that comes with the desktop software. Blackberry's website referred me to a page with the correct software for my AT&T 8310 phone, but that software does not include a media manager or anything by Roxio. Just two synchronizing utilities, backup/restore, switch device wizard, and application loader, but no media manager. How do I go about getting it?

https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=GlVq5DU1IfqpqR2JjNtMaw
Select the latest desktop manager, then select the version with the MediaManager (like the 3rd link down).
Message Edited by Sugrat on 05-27-2008 12:28 PM

Missing media files after update

I did a back up and updated my 8520. Now the media files are missing. did a restore but did not help. What went wrong?

Hi
You haven't given much to go on. Please explain what you did and what software you used in addition to the following
Blackberry Model.
Carrier Name.
Do you have a Data Plan?
Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
Memory for Device and SD Card Options > Memory
Any error statement or code.
The Exact nature of problem - the more info the better.
When this started and whether it started just after an update or new App download and which App/s theme/s download.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

No recent and missed calls listed after iOS 7 upgrade

Upgraded iphone 5 to iOS 7, after a couple of days of use the Recent and Missed calls list is still blank. I routinely use this identify and return missed calls (access from the phone screen). How do I get this list back?

There are hundreds or people wih this exact same problem and apple has no interest in fixing it or publicly giving and answer to the issues.
They Botched this release big time. I look forward to having tp wipe my 64gb iPad and start from scratch. Oh boy do I!!

Unknown device in device manager after win8.1 upgrade W540

I'm using the W540 with an ultradock and external monitors. After upgrading my W540 to win8.1 64 bit, device manager is showing an unknown device. I'm not quite sure what it is, but almost everything seems to be working fine and Lenovo solution center isn't finding any driver updates.
I did notice that the solution center hardware scan did not test the video card memory and listed that test as N/A. Video and monitors seem to be working fine though and both nvidia and intel graphics show up in device manager.
Device manager lists the device in question as follows:
Device instance path: ROOT\SYSTEM\0001
Hardware Ids: root\iwdbus
Device stack: \Driver\PnPManager
Solved!
Go to Solution.

This seems to fix the problem.. any idea why?
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W530-unknown-device-after-installing-windows-8...
(In device manager - Right click, uninstall, scan for hardware changes)

Missing Pages documents after Snow Leopard upgrade

I upgraded my Mini to Snow Leopard and now several newer, previoulsy saved Pages documents are missing. They were on the machine before the upgrade and I thought they resided in the documents folder, which I backed up. However, they are not there now (looked at Time Machine when I did the original backup).
Any ideas as to where they could be? Older Pages files are there in the documents folder
Prior to the upgrade I blew away everything in "downloads" but these Pages documents were newly created on the desktop and should not have been saved there.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Cannot launch V cast Media Manager after install

Windows XP, SP3
Just installed the program (and uninstalled, and reinstalled 3x's with and w/o security programs enabled). Upon the finish of the install is a "Launch" button. When clicked, the program launches, a tutorial screen pops up, and freezes every time. I've tried restarting the computer and then restarting the program with no success.
My husband has installed it successfully on our Mac OS 10.6.6 and Windows 7 systems.

Just joined up. Having the same problem. Was on the phone with 3 different Ver. techs for 4 hrs. before one asked me to check the FAQS, which states Verizon V-Cast is down. They didn't wven see it! Been over 12 hours and STILL DOESN"T WORK! I'm just trying to download pics from my old (broken lv11000 env-touch) to the warranty replacement without having to buy the $card. All the techs said I should be able to download without the crd if their system was up. Any suggestions or experience out there??

Missing Media error after moving project from MacBook to iMac

I can see the project in iMovie fine, and the audio track information bars are still showing in the editing window, but the background music track is now called "output" instead of the song name, even though I added that song to the iTunes library. That isn't a big deal, but when it comes to the Voiceover tracks it is a huge pain because I'll lose all the lipsyncing I have done. (When doing outdoor interviews, in order to defeat wind noise I use lavalier mics and digital recorders to produce separate wav files for the questions and answers.) Any ideas how to relink the tracks?

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Media Manager 9.6.12 won't run; insists that I "upgrade" to same version, refuses to run

Every time I run Media Manager, an Upgrade window appears with the options to "Quit" or "Upgrade".
I can't use Media Manager because I can't dismiss this upgrade box without selecting one of those two buttons.
- Clicking "Quit" exists the upgrade application and Media Manager completely,
- Clicking "Upgrade" closes Media Manager and launches "Verizon Media Manager-9.6.12 Setup", with the options to Repair or Remove.
I've repaired the installation several times with no errors, but every time Media Manager launches, this process starts again (with the modal Upgrade window). I've completely uninstalled Media Manager (both through the Upgrade app and via Add/Remove Programs) and reinstalled it from a fresh download. I've rebooted at every opportunity along the upgrade and remove/reinstall paths. The results are always the same: double-click Media Manager, it loads, it says I have to upgrade or quit.
I'm running on a fully patched XPsp3 machine. The only other apps on this box are Panda Cloud Antivirus, TRENDnet SecureView (IP camera montior), PerfectDisk (defragger), and an [inactive] installation of Cerberus FTP Server. The machine also serves as a VPN gateway into my home network (via built-in XP services, nothing 3rd party). Besides periodic updates, no programs have been added or removed in at least two years.
The problem likely started sometime within the past few months; I just noticed it I recently when I went to check the PC's status.
Suggestions?

I haven't other reports of this happening. Are you able to successfully install and use it on other machines in the house? It sounds like there is something interacting with it causing problems which we would need to isolate programs one by one to find which is the offending program.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

ORA-27211: Failed to load Media Management Library after Update to HP DP 6

Hi,
after an Upgrade to Version 6.0 from the Backupsoftware HP Dataprotector i can't run RMAN Backup's anymore, because something is wrong with Linking of the MML.
BS: SLES 8 / Kernel 2.4.21-251-smp
Oracle: 9.2.0.5
I try this RMAN Statement:
RMAN> run
2> {
3> allocate channel 'c1' device type sbt_tape
4> PARMS='SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so';
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 10/22/2007 16:04:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
the tracefile (i try RMAN Test with and without PARM Parameter):
Dump file /u01/app/oracle/product/9.2.0/rdbms/log/khv_ora_11745.trc
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: Linux
Node name: dbtheresien3
Release: 2.4.21-251-smp
Version: #1 SMP Thu Sep 23 17:22:54 UTC 2004
Machine: i686
Instance name: KHV
Redo thread mounted by this instance: 1
Oracle process number: 35
Unix process pid: 11745, image: oracle@dbtheresien3 (TNS V1-V3)
*** SESSION ID:(72.47988) 2007-10-22 15:53:24.684
Failed to load SBT library libobk.so
*** 2007-10-22 15:57:35.736
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 15:58:16.009
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 16:02:46.904
Failed to load SBT library libobk.so
*** 2007-10-22 16:04:24.761
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
All Infos i found tells me:
- that i doesn't need to restart the Instance of the Database
- i must only remove the old link in $ORACLE_HOME/lin/libobk.so and take a link new link $ORACLE_HOME/lin/libobk.so to the new Backuplibrary in /opt/omni/lib/libob2oracle8.so
But this doesn't work!
Any usefull Hints?
I always try the RMAN Command's:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
Nothing help...
My last Idea ist to reboot the whole Database, but this is a little difficult 8-)

hi,
all Systems are 32 Bit (Database Oracle 9.2.0.5 and DP6.0).
What do you mean with "what is Version DP6" ?
HP Dataprotector 6.0 with Patch DPLNX_00013
thx
Thomas

Media Manager not working properly after installing update

I have an 8110 and upgraded to desktop ver. 5.0. Since that time, Media Manager does not recognize the 8110 put pictures on computer.
What do I need to do to correct this?
Thanks.
Solved!
Go to Solution.

There is no need in Media Manager.
You can transfer files directly:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...

Unable to start Hyperion EPM Architect - Process Manager after upgrade

Hi All,
I'm unable to start Hyperion EPM Architect - Process Manager after upgrading from EPMA 11.1.1.3.0 to 11.1.1.3.03. I get the following error in the Event Viewer.
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database version mismatch: Hyperion.SessionManager schema version is 9.5.0.0.0.10, database schema version is 9.5.0.0.9.1.
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings)
at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout)
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String jvmPath, String classPath, String ctgLibPath, String cssConnInfo, String hubHost, String hubPort, Boolean enableNestedGroups, String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean restorePastInstanceSessions, Boolean ...
I've run through all the steps of patching EPMA ran the Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql script per the patch readme. But can't figure out where it's pulling the schema version number from. Any ideas?
Thanks,
Chuck

Hi,
you forgot to update the EPMA database. Last step in patching is:
Now, you must run the database upgrade script before starting the process manager.
Run the single database upgrade script that corresponds to your database vendor.
Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
SQL_Server_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
DB2_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
The scripts are located in the following directory:
%HYPERION_HOME%\OPatch\EPMA_11_1_1_3_01\files\products\Foundation\BPMA\Server\conf\
hope that helps.

MEDIA MANAGER NOT HANDLING AFTER EFFECTS 7.0 RENDERS

Media Manager works on my captured DV footage. However, when using an After Effects QT movie copy of my credits, it failed. I spent several hours on this since it initially was my "test."
I gave up then tried my captured footage, canceling before actually processing it. Voila! I could finally see a change in the bar graphs. Any ideas why this happened? Can't insert a screenshot of my afx settings (ugh!) so I've typed them. Thanks for helping!!!
After Effects 7.0
RENDER SETTINGS BASED ON BEST SETTINGS
Resolution: full
Size: 720x480
Proxy use: no proxies
Effects: Current Settings
Disk Cache: Read Only
Color Depth: Current settings
Frame Blending: on for checked layers
Field Render: off
Pulldown: off
Motion blur: On for checked layers
Use openGL: off
Solos: current settings
Frame rate: 29.97
OUTPUT MODULE BASED ON QT DV NTSC 48KHZ:
Format: qt movie
Output info: DV/DVCPRO-NTSC
Spatial Quality=Most(100)
Embedding: project link
Output Audio: 48,000kHz/16bit Stereo
Channels:RGB
Depth: Millions of Colors
Color: Premultiplied
Final Size: 720 x 480
Stretch: -
Crop: -
MacBook Pro Mac OS X (10.4.7) 1G RAM, 500G LaCie HD

There can be problems with media manager if your source clips do not have a reel associated with them (as happens with imported files as opposed to captured material). Try creating a tape name in the browser for these clips. This may solve your problem.

Media Manager missing (not highlighted) in v4.7

My first blackberry - a Bold 9000 and V4.6 from the CD but had issues originally with PC syncronisation therefore loaded 4.7 from the web. After much time spent on the phone with Orange (dialled 328) we got it working and all has been fine until today when I want to move pictures and video from the Bold phone to my PC. The Media Manager is grey-ed out from V4.7. Any ideas what to do?
Solved!
Go to Solution.

1) you don't need the Media Manager if it's just to put some media files on your device :
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
HOWTO : use your blackberry as a USB device
2) if you really need the Media Manager, you have to uninstall your today Desktop Manager, and download the bundle "Desktop Manager + Media Manager". You can do that by clicking on the "SOFTWARE" button on top of this page, then on the bottom right corner for Desktop.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Missing Media Manager after 4.3 Upgrade

Similar Messages

Maybe you are looking for