Missing media not missing?

I opened a FCP7 project file and 6 of my clips were supposedly missing. After attempting to reconnect the media nothing appeared to happen. The sequence was still showing the red and white Missing Media thumbnails; and when I set the playhead over a "missing" clip the message also appeared in my Canvas. However when I play the sequence all shots are there... nothing's missing. I don't get it, and though everything seems OK (other than the unexplainable Missing Media messages) it concerns me because this is a large project I've been working on for months. Does anyone know if this is some glitch or a sign of a larger problem. I just had the project opened yesterday without an issue. I made a few minor adjustments, saved and quit -- nothing that should have resulted in this situation. Any thoughts would be appreciated. Thanks!

Thanks for the response, Michael.
The good news: I ran Disk Utility and everything checked out fine with the HD.
The bad news: I found my original clips and they're just black when I play them -- nothing there. I have no idea what happened. I'm assuming I'm seeing the render files when I watch them in my sequence.
Should I still run Disk Warrior as an extra precaution?

Similar Messages

Epson r1800 - 'Media not loaded correctly'

Hello All,
I'm having a lot of trouble with my Epson r1800 - I've searched around the internet a bit for solutions but so far haven't come up with anything. To start, I have updated the epson drivers and also tried Gutenprint drivers.
Basically, no matter what I try (including the standard nozzle checks etc...) I always get the message 'Media not loaded correctly'. Occasionally pages will feed through the printer, but they are blank and regardless I get the media not loaded correctly message. Does anybody have a workaround or solutions for this?
Thanks!
Gavin

Try using the following directions from a message from Epson. This corrected my problems with an Epson R1800 and Leopard.
Thank you for taking the time to contact Epson. It is my pleasure to
respond to your inquiry.
If your output is faint or if the driver settings and/or features are
missing, your system may have automatically added the printer using the
Gutenprint driver. Many Epson drivers are provided with Leopard but the
driver for your printer needs to be downloaded from the Epson website.
Determine Which Driver is Currently Being Used
1. Click on the Apple icon in the upper left corner of the Finder and open
System Preferences.
2. In the System Preferences window, click on Print & Fax.
3. In the list of printers on the left side of the Print & Fax window,
click once on your Epson printer to select it.
4. Check the name of the driver being used; it is displayed in the center
of the Print & Fax window next to “Kind”.
5. If the driver name displayed next to “Kind” is Gutenprint, the incorrect
driver is being used. Follow the steps in the next section to select the
correct driver.
Selecting the Correct Driver
1. Turn off the printer.
2. Delete the print queue and remove the printer from Print & Fax by
clicking on the minus button under the list of printers. Click OK to
confirm the removal.
3. Go to the Epson support website (www.epson.com/support).
4. Select your product model and download the driver for OS X 10.5 Leopard
operating system.
5. Double-click the downloaded file and follow the on-screen instructions
to install the printer driver.
6. Click on the Apple icon in the upper left corner of the Finder and open
System Preferences.

CVP Media not played

Hi,
I am presently setting up a lab to test CVP applications. My setup is quite simple with CVP 8.0, Voice Gateway 2811 and Layer 2 switch, ICM components ICM 8.0 ON Vmware. I started with CVP Comprehensive setup and found the media not beign played. Troubleshooting this further i have gone to very basic of playing a Hello World App using Standalone setup. Tryng to kick in a basic hello world also does not play the successful installation of VXML Server.
The setup is simple as x-lite(ip) phone calling 1002(Dialed number) on the Ingress/VXML gateway further initiating the Hello World Apps. The show http client gives me a clear url and having that pasted on the web browser plays the file too.(logs attached).
Debugging vxml shows me a handoff error but i am not able to figure out the exact problem. I have tried the IOS as recommended in the BOM for 8.0 and few ios are as below.
c2800nm-advipservicesk9-mz.151-3.T.bin
c2800nm-advipservicesk9-mz.124-24.T2.bin
Hope i am not missing on anything simple here.
Thanks.

Hi,
I have replaced the handoff file but results are still the same. Pls let me know how do i attach the files as it is not giving me any option to attach. Anyway logs are blow.
Activity logs from Hello WORLD App..
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,newcall,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,ani,sip:[email protected]
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,areacode,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,exchange,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,dnis,sip:[email protected]
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,uui,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,iidigits,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,var1=1002
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,vxmlversion=CVP_8_0_1_0_0_0_1440
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,callid=A91CBC67041B11E2801889B0DEB52970
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,tclversion=CVP_8_0_1_0_0_0_1440
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,Subdialog_Entrance,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.083,Subdialog_Entrance,exit,done
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.083,HelloWorld,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.087,HelloWorld,interaction,audio_group,initial_audio_group
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.302,HelloWorld,exit,done
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.302,Subdialog_Return,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.067,Subdialog_Return,exit,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,how,app_session_complete
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,result,normal
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,duration,10
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,newcall,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,ani,sip:[email protected]
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,areacode,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,exchange,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,dnis,sip:[email protected]
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,uui,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,iidigits,NA
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,var1=1002
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,vxmlversion=CVP_8_0_1_0_0_0_1440
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,callid=A91CBC67041B11E2801889B0DEB52970
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,,start,parameter,tclversion=CVP_8_0_1_0_0_0_1440
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:58.505,Subdialog_Entrance,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.083,Subdialog_Entrance,exit,done
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.083,HelloWorld,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.087,HelloWorld,interaction,audio_group,initial_audio_group
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.302,HelloWorld,exit,done
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:34:59.302,Subdialog_Return,enter,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.067,Subdialog_Return,exit,
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,how,app_session_complete
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,result,normal
192.168.10.20.1348331698474.0.HelloWorld,09/22/2012 11:35:08.083,,end,duration,10
Nothing on the Call Server side.
Regards,
Ganesh R

CS4 internal error 11 Media not found, for menus?

Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal Burner

Shouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio

Need to create, build, or obtain the Windows 7 INSTALLATION media, not the recovery stuff

I want to be able to install Windows 7 on a Thinkpad WITHOUT all the factory installed stuff. I DO NOT NEED the recovery image "solution" that comes preinstalled on the laptop. I need to be able to create a clean Windows 7 installtion that we can image and deploy without the preloaded stuff.
Basically, is there a way, and if so, how do I create a Windows 7 INSTALLATION media, not the recovery stuff? If this can't be done, do I need to purchase the media from Lenovo? An example of what I'm looking for: Dell makes it very easy to do this. You can create the Windows 7 installation media. Just like the Windows XP and 2000 CD/DVD's they used to ship.
I have searched and can't find anything the addresses this.
Solved!
Go to Solution.

I'm taking a guess that you're looking for a vanilla Win 7 installer download. As sarbin said, if that's not your issue, please start another thread. (At least this will update that stale link - for a while.)
The content in that link got pulled a while back.
Here's a fresher link that still works (for how long, who knows...) Even includes SP1.
Default Legal Download: Windows 7 with SP1, 13 languages
These are Microsoft installer DVD ISOs that still require activation. If you choose one that matches the COA on the target machine (home premium, pro, ultimate), they can be activated with that COA. it will require phone activation.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

AFTER 10.5.4 UPDATE "MEDIA NOT RECOGNIZED" WHEN BLANK DVD ON DRIVE

Hi, after update 10.5.4 my CDs and DVDs will be read and play in the Optical Drive, But when I insert a blank one, any kind, the finder will open and when I select to mount it "media not recognized" comes up. I have the same DVDs that Ive been burning to till this update with no problem at all.
I already did permissions repair.
Please help.
Many Thanks!

I have a problem pretty much like that too, I updated my mac, and now my superdrive won't read my discs, but unlike yours, it spits the disc out.
I did find out that it can recognize DVD +R, sometimes, but it can nolonger recognize DVD -R.
Also my superdrive makes a sound like this: http://www.imeem.com/people/2tOboJ/music/gQwemcsY/superdrive_problemwav/
Sorry if I'm hitching on your post Alex, I also have another problem, and that is I can see the "reply to this post" icon but I cant see any icons that say "post new topic" anywhere, I wonder why. =(
Andrew
=)

"media not present" error when burning blu ray in PE12

I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR

Trying to burn my video to a dvd and I get media not present ?

I am trying to burn my video to a DVD and I get media not present ??

mcavalla
Just going to add on
a. Is this a :"it worked before but not now" issue or "it never worked before" issue?
b. If you did a burn to folder (4.7 GB) for your DVD-VIDEO, does that go to a successful completion?
Looking forward to your follow up.
Thanks.
ATR

What causes Media not present error, even with disc inserted

I have a 2 hr video project that I would like to place on a DVD in NTSC format. I get an error msg "Media not present" even with DVD inserted in burner. I have checked "Fit content to available space". Is the 2 hr project too long to compress onto the DVD, or are there other possible causes? I did a 1 1/2 hr project with no problems. I have plenty of hard drive space.

download orders
What version of Premiere Elements and on what computer operating system is it running?
The problem is the disc in the burner tray not being recognized by Premiere Elements. Another frequent related issue is Burner Location: in burn dialog being empty when the Premiere Elements does not recognize the burner.
In the problem that you have,
a. Have you tried other brands/types of DVD discs?
b. If you start a new project and take the new Timeline content to DVD-VIDEO on DVD disc, does the problem remain the same?
B. Have you tried program uninstall/free ccleaner run through/reinstall with antivirus and firewall(s) disabled?
If you are in a time crunch, you should consider burning the Timeline content to folder and then taking the VIDEO_TS Folder from that
saved folder into a program like ImgBurn for the DVD-VIDEO on DVD production.
Please review and consider and then we will supply you with how to details. Looking forward to your results.
Thank you.
ATR

Iphone 5 media not recognised on fiat blue and me

iphone 5 media not recognised on fiat blue and me

if you connects an ios device over usb it only provide 3 features
1. sync with itunes (only on computers of cause)
2. act as a camera to copy out the photos (only on computers)
3. charge the ios device
nothing you connect by usb can play music on your ios device

System Recovery Media not supported by computer

My computer won't boot off of internal hard drive. I can boot off of recovery DVD that I made when I got the machine, but after booting into some sort of recovery/safe mode (windows logo comes up) , a message appears that says "recovery media not supported by this computer". I think the hard drive may be done, I was going to get a cheap SATA drive and replace the original.

Hello @gus12345,
I understand that you are getting an error that says "recovery media not supported by this computer". I suspect it is your recovery discs that are the issue for this error. That is not to say that your harddrive is not at fault, but the immediate error is related to your discs. I am providing you with an HP Support document: Obtaining HP Recovery Discs or an HP USB Recovery Drive, which will provide you with the various ways of getting a new copy of your recovery discs.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Mbp stuck at loading screen disk0s2: media not present

My MacBook has been acting wierd lately. I've had it since sept. It used to freeze when I would open safari and now it stays stuck on the apple screen when I try to boot it. I've done a hardware test and it says everythings ok. I've also done safe boot but after the bar is done it goes back to the apple logo where the wheel just keeps spinning. When I do verbose mode I get the message disk0s2: media not present dies anybody know what I can do to fix this

Sounds like something has gotten corrupted and your OS is simply not booting. Insert your system disk and boot from it by holding the c key while powering up. Run the Disk Utility from there and do both a permissions repair and a disk repair.
If you do not have your disk handy, hold command+s while booting. At the prompt, type...
fsck -yf
Allow this to run until it gives you a clean bill of health, then type...
exit

Works fine on macs but when i load the page on p.c i get 404 media not foun

works fine on macs but when i load the page on p.c i get 404 media not found. Which is odd since it works on any mac i've tried on the same network, does anyone have any ideas?

I too am having the 404 media not found on my blogs, but its on both my mac and pcs. I am wondering if your macs can see it because of them being bound to the server?? Just an idea, which doesn't help me at all. So if you find a way to fix it please please post it.
Kcam1999

"Quality and Media" not displaying in Print dialog.

I am using Mac OS X 10.6 Snow Leopard on a Macbook Pro with a Canon MB5220 Multifunction printer over WiFi. I have installed the Canon Drivers and can print to the printer but the "Quality and Media" menu choice does not display in the print dialog so I can't set any of the quality settings or the color settings for the printer.
I installed and re-installed the drivers. Tried with several applications such as TextEdit and preview. Only menu choices are Layout, Color Matching, Paper Handling, Cover Page, Scheduler.
Is there anything that would keep Quality and Media from dispaying?

It's not just the Quality & Media menu that appears to be missing. There are three other Canon menus you should see like below;
These menu items are supported by the plugins bundle installed in /Library/Printers/Canon/BJPrinter/PDEs, which supports a number of Canon inkjet printers. Since reinstalling the driver for the MG5220 has not helped then I would try a reset of the printing system and then adding the printer again. To reset the printing system, open Print & Fax, move the mouse over the Printers list and Control-click. The reset popup will appear. Select it and authenticate if prompted and then restart the Mac. Please note that this action will remove all printer and scanner queues from Print & Fax, but not the associated drivers so just the queues will need to be added again.
If this action does not resolve the problem then try running the Canon Driver Update v2.6.

Remote Access Media Not Working correctly

I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
access the folders successfully since installing the new version last year.
I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
the issue or not.
This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
some mp3 files in the folder, but those were not seen either.
I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
work. It's probably the feature I miss most from Windows Home Server 2011.

I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
I'd love to get this working:
Setup.exe Information: 0 : Launching GUI...
    ThreadId=1
    DateTime=2013-10-23T02:03:16.8596601Z
Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4417397Z
Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4447410Z
Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4457406Z
Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4467401Z
Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
    ThreadId=3
    DateTime=2013-10-23T02:03:19.9957563Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
    ThreadId=3
    DateTime=2013-10-23T02:03:29.6280511Z
Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
    ThreadId=3
    DateTime=2013-10-23T02:03:29.6440517Z
Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
    ThreadId=3
    DateTime=2013-10-23T02:03:29.8080570Z
Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
    ThreadId=3
    DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
    ThreadId=3
    DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Pausing automatic updating...
    ThreadId=3
    DateTime=2013-10-23T02:03:43.5934789Z
Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
    ThreadId=3
    DateTime=2013-10-23T02:03:44.4985065Z
Setup.exe Information: 0 : wusa.exe exits with code 0.
    ThreadId=3
    DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Resuming automatic updating...
    ThreadId=3
    DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Starting to search update...
    ThreadId=3
    DateTime=2013-10-23T02:07:29.3043848Z
Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
    ThreadId=3
    DateTime=2013-10-23T02:07:29.3343851Z
Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
    ThreadId=9
    DateTime=2013-10-23T02:13:33.9205387Z
Setup.exe Information: 0 : Windows Desktop Experience role is installed.
    ThreadId=3
    DateTime=2013-10-23T02:13:33.9215395Z
Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
    ThreadId=3
    DateTime=2013-10-23T02:13:33.9275389Z
Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
    ThreadId=5
    DateTime=2013-10-23T02:13:39.3497048Z
Setup.exe Information: 0 : Windows Search optional feature is enabled.
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3507050Z
Setup.exe Information: 0 : Turning on media feature auto-enabler...
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3627043Z
Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
    ThreadId=1
    DateTime=2013-10-23T02:13:48.5809850Z

Missing media not missing?

Similar Messages

Maybe you are looking for