Missing movement type data in 0IC_C03 cube

Hi Gurus ,
i have deltas running for 0ic_c03 cube in B1 7.0 i have used transformations for loading cube .
In a report of this cube for plant material stock, i can c the quantities matching with MB51 report of R/3 where as the values are not matching for sum material ( negative stock values with 0 qtys )
i found that a movement type 121 data is missing in BW
i have read thread on the forum suggesting to work on OMJJ transaction and make 121 movement type as statistics relevant.
But i want to know how this action will effect on R/3 update controlling ?
any inputs will b a grt help
Edited by: Rajesh Dalwadi on Jan 13, 2009 12:09 PM

Hi,
We faced lot of problems with missing movement type, fo that we taken correct confirmation from MM team and then added it in Update Rules and deleted the data in Cube and then Re-Initialized the Cube.
To do this, you need ECC Down Time. I'm talking about BW 3.5. I think in BI7, it may be easy, (without taking down time, pls check).
Thanks
Reddy

Similar Messages

Movement Type Data is missing

Hi experts,
Can some one tell me why i am not getting Movement Type data in the inventory cube 0IC_C03 after loading from 2LIS_03_BX,2LIS_03_BF,2LIS_03_UM infoSources ??
The thing i don't understand is i can see data for Movement Type in the PSA but not in the cube ?
Thanks a lot
B

Hi,
I never see the the characterstic for holding the Movement Type information. I mean to say, there is no characterstic(for example 0MOVETYPE) in Info cube 0IC_C03. Thats why your not able to see the informatin regarding Movement Type .
Try this:
Enhancing(including 0MOVETYPE)the cube.Enhance the DS 2LIS_03_BF only. It does not make sense to enhance the DS 2LIS_03_BX to have the stock initialization with respect to movement type.
With rgds,
Anil Kumar Sharma .P

Movement Type data is not Showing in IW39 tcode

Hi,
We run the T.Code IW39 for Single Plant...Output showing correctly....
But after select whole output, we goes in Environment --> Goods Movements path...but after this, No objects were selected..even i select all the output comes after execution...
For other Plant, movement type data is coming.... Please help me out of this...
Regards..

Hi,
'No objects were selected' status message appears when you have not selected the order against which any goods movement have taken place. may be with your other plant there are few orders against which the goods movemements have been recorded in the system.
you can better be ensured by selecting the particular order against which goods movement have been carried out.
Regards,
Lucky.

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

Movement Type in Inventory Management Cube

Hello Guys,
I am new to the area of Invenotry Management. I have seen the How to Guide and blogs by Surendra for Inventory Management scenarios.
One of initial doubt is that the cube 0IC_C03 does not have Movement Type. As per the blog, we can define transaction keys in BW but how do I pull it in my Cube. Is ehnacing the extract strcuture BF the only option? If yes, what logic do we follow to add movement type to BF?
Also as per SAP Note, we cannot enhance BX to include movement type. So would it create a problem if BX does not have a movement type and BF has?
Looking forward to solutions
Thanks n Regards,
Abhishek

Dear John
The movement type has important control functions in Inventory Management.
For example, the movement type plays an important role in
=> updating of quantity fields
=> updating of stock and consumption accounts
=> determining which fields are displayed during entry of a document in the system
thanks
G. Lakshmipathi

Inventory Cube and Movement Types

Hi All,
I have few changes made to a Zcube modeled after 0IC_C03
1. I have changed the validity to Cal Day, Material (and removed plant form the validity table)
2. I included Movement Type as a characteristics (it will be easy to count by movement types and validation)
I am not sure whether the issue movement type reqlated quantity should be -ve value (but I multiplied the values by -1)
Now,
When I run the query with material, Movement type an cal day I get almost 3000+ records for one material where there is only 160 records are in the cube. the query brings all dates between movement types though the records are not existing in the cube. I am not sure whether it is due to the validity table (just material and cal date).
I have given the key date in the query as well.
Also should we make the issue qty as -ve and receipt qty as +ve and the values the same way?
Thanks,
Alex.

Hi Swetha,
First check if you have that movement type is present in PSA request at the data source level in BW. If you have it in PSA and not being updated into the target means some transformation or routine is filtering it out during the update. Check the code if it is expected or not. If not present in PSA and present in R/3 check the Init Selections if there are any selective Init from the Data source.
There is no way you can directly update in the report unless you have that record in the backend infocube.
Based on this you can figure out how to recover the missing movement types.
Hope it helps
Regards
Srikanth

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Regarding Movement types in Inventory dataloading

Hi Experts,
I have loaded the data for Inventory management cube 0IC_C03.
while doing validation some materials are matching and some are not matching,and i found the issue in BI i,e some of the movement types 101,102are missing in BI.
can anyone of please guide me the step by step for inventory dataloading.So,that i will reload the data and check.
Please do the needful.
Thanks
lakshmi

Sorry!! It's not clear what you are saying
What I understand is : you are not able to see Mov types = 101,102 in Cube ... right?
Did you check in PSA as mentioned in my earlier post ?
Check start routines if any are filtering Mov types = 101,102

Moving data to archive cube

Hi Experts,
We are extracting data from R/3 to BW.We are keeping 2years of Data in DSO1 and moving into Cube(R/3>DSO1>Cube1).we have 2007 and 2008 data in the DSO and Cube.We extracted 1999 to 2006 data in to History DSO from R/3 and sent into InfoCube(Cube2).The flow as is follows
Current Data:2007 and 2008
R/3 -
>DSO1--->Cube 1(Deltas are running)
History data:1996 to 2006
R/3>DSO2--->Cube2.
Now I want to move 2007 data in to History data(History DSO and Cube).
I have two options to get this job done .
1.Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2.
2.Move selective data from Cube 1 to Cube 2.If So I can't see item wise data just I can see only Aggregated data in the cube.
Is there any best approach other than two options.if not what would be the best between two options.
Once I move the data into History cube I need to delete the data in Current DSO and Current Cube based on selective deletion.If I delete the data in DSO and Cube is there any impact on currrent Delta load.
I need to do this every year becuase we want to keep only 2years of data in current data InfoCube..Could any one throw some light on the above issue.
Thansks,
Rani.

Hi Rani.........
Ur 1st Question....
We are extracting data from R/3 to BW.We are keeping 2years of Data in DSO1 and moving into Cube(R/3>DSO1>Cube1).we have 2007 and 2008 data in the DSO and Cube.We extracted 1999 to 2006 data in to History DSO from R/3 and sent into InfoCube(Cube2).The flow as is follows
Current Data:2007 and 2008
R/3 -
>DSO1--->Cube 1(Deltas are running)
History data:1996 to 2006
R/3>DSO2--->Cube2.
Now I want to move 2007 data in to History data(History DSO and Cube).
I have two options to get this job done .
1.Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2.
2.Move selective data from Cube 1 to Cube 2.If So I can't see item wise data just I can see only Aggregated data in the cube.
Is there any best approach other than two options.if not what would be the best between two options.
ANS I want to clear u one thing.....that in infocube data will not get Aggregated until u aggregate the Cube.........So u can see the data in cube item wise if u don't aggregate the cube.......
Anyways...I think the best option is to follow the Flow.....Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2..........
Secondly..U hav asked...
Once I move the data into History cube I need to delete the data in Current DSO and Current Cube based on selective deletion.If I delete the data in DSO and Cube is there any impact on currrent Delta load.
I need to do this every year becuase we want to keep only 2years of data in current data InfoCube..Could any one throw some light on the above issue....
ANS Selective deletion of data is not going to effect delta loads...so u can do Selective deletion...
Actually Delta load will get effected....somehow if anyone delete a delta request without making the QM status red.......then init flag will not be set back....and data will be lost...
Hope this helps..
Regards,
Debjnai...

Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03

Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
Romil

Hi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid

Inventory cube with Movement Type

In standard Inventory cube 0IC_C03 we have added movement type and loaded the data(followed the process exactly as mentioned in the How to handle Inventory management and compressed).
After loading the data materialwise valuated stock qty and value is matching, but when we drill down movement typewise(for ex.101,102 etc) data is not matching with R/3.All 101 movement types showing in negative values.
Do we have to do any changes in the standard routines if we add movement types in the cube 0IC_C03?.We are loading the data based on processing keys as per the standard routines.
Please help me with your inputs.
Thanks in advance..
Soujanya

Hi,
1)Receipt and Issue key figures already avilable in the cube right?.Still do I have to add in the zic_c03?.
I would like to suggest you to take fields of the cube as it is the fileds available in BF datasource . And any way have those Kf mentioned by you are already in 0IC_C03 cube,so no need to take them here also.
2)If we drill down based on movement type in the report we have to include on receipt and issue key figures?.
In the drill down report , you better take KF 0QUANT_B,0VALUE_LC into columns and Movement type into Rows.
3)We shouldn't look valuated stock qty and valuated stock value based on movement type?
Yes,It does not make scence.
With rgds,
Anil Kumar Sharma .P

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Movement type for production supply missing in warehouse

Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?

All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick

While uplading Flat Files data to BW without movement type...........

Hi
We have to populated historical data to BW. In r/3 we are maintaining MM data with respect to Movement Type.
However, the historical data which is provided to me is not with respect to movement type.
will that affect accuracy in reporting if i populate the historical data without Movement type to 0IC_C03.
Can anybody suggests, how to proceed with this.......
Thanks in advance...
Rahul

Rahul
You can ask your client to provide you the data according to movement type. Also you can get movement type mappings from the transaction OMJJ.
If you upload the data without movement type, then you will have problem, while you generate reports which involves historical and operational data.
Hope it helps
Sayed Rafi Basheer

Classification Data (SLED) not Updated for Movement Type 561

Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.

Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK

Missing movement type data in 0IC_C03 cube

Similar Messages

Maybe you are looking for