Missing MSI Clock using 64bit MSI 77.77 drivers
Hi,
I'm on a freshly installed copy of XP64bit (AMD).
Downloaded and installed MSI's 64bit drivers for my MSI NVIDIA 7800GT card and I'm missing the MSI Clock tab with the Dynamic Overclocking bits.
Any ideas where it went or how to get it back? I don't want to use the coolbits or Nvidia's tuning utils, just the plain old MSI tool.
I had it pre reinstall, but now, is missing. I get MSI Information but not the tools!
At my wits end after an hour of googling for an answer.
Any help greatfully received.
PS. I've narrowed the components down to SW20.exe & SW24.exe which are both present on the install dir for the x64 drivers.
PPS. Asus A8N SLI Motherboard
Regards
Kieron
Quote from: Richard on 16-June-06, 22:43:55
Kieron,
x64 hardware Driver Support is spotty at best for any hardware out there. You can set your Fan Speeds using the ForceWare Drivers combined with Riva Tuner.
Take Care,
Richard
Ditto
Similar Messages
-
Missing MSI files SQL Server 2008 R2 SP3
I have hit an issue while installing Service Pack 3 for SQL Server 2008 R2. The existing version is
10.50.4295.0 (SP2+CU9)
When running the SP3 file the following error occurs
SQL Server Setup has encountered the following error:
The cached MSI file 'C:\Windows\Installer\91a4f43.msi' is missing.
Its original file is 'sql_engine_core_inst.msi' and it was installed for product 'SQL Server 2008 R2 SP2 Database Engine Services' from '\\ServerName\Share$\SQL\SQL105\ENT\x64\setup\sql_engine_core_inst_msi\', version '10.52.4000.0', language 'ENU'.
To resolve this problem, recover the missing file from the installation media and start setup again.
For more information about how to resolve this problem, see 'Steps to restore the missing Windows Installer cache files' (http://go.microsoft.com/fwlink/?LinkId=144387) in the Microsoft Knowledge Base.
Error code 0x84B20002.
The next I tried to remove CU9 before applying SP3. The following error occurred when CU 9 was attempted to be removed.
The cached patch file 'C:Windows\Installer\483c7040.msp' is missing.Hello Alberto,
I tried this link
http://support.microsoft.com/kb/969052
Using the VB script FindSQLInstall I tried getting some details about the missing MSI files. Just sharing the details incase you may have some details or better insight on what it says.
!!!! C:\Windows\Installer\91a4f43.msi DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
\\Servername\Sharename$\SQL\SQL105\ENT\x64\setup\sql_engine_core_inst_msi\then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy the missing file or manually
replace the problem file overwriting it is exist:
Copy "\\Servername\ShareName$\SQL\SQL105\ENT\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi" C:\Windows\Installer\91a4f43.msi
It points to a location that doesn’t exist in the central server (servername) from where usually the installation media is present. The folder structures were re-arranged and the path mentioned (\\Servername\ShareName$\SQL\SQL105\ENT\x64\setup\sql_engine_core_inst_msi)
is no longer there.
Now from where do I copy this particular .MSI file? I've tried using search option but I'm unable to find it.
One more update is that I was successfully able to do the SP3 upgrade on another server which was SQL Server 2008R2 SP2 (No CU on it)
Hi Jayakrishna,
After your above steps, please put the SQL Server setup media on the same path
\\Servername\Sharename$\SQL, then run the VB script again and it will recreate the MSI file on the path C:\Windows\Installer with the name “91a4f43.msi“.
If the error still occurs, then you can manually restore the missing MSI file following the steps of Procedure 2 in this article:
http://support.microsoft.com/kb/969052 .
In addition, we recommend you use local copy of media to install SQL Server 2008 R2 SP3.
Thanks,
Lydia Zhang -
Can't delete itunes to update because of missing msi file
Had virus issues with my computer. Now finally got the add or remove list to re-populate and tried to update iTunes. Kept saying error, can't find missing msi file. Read to manually delete all apple/itunes files including quicktime, etc. Itunes won't delete because computer needs to find this missing msi file. Have rebooted numerous times. Should be a quick fix, I would think. Please advise!! Missing my itunes Thanks
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Unalbe to upgrade iTunes missing *.msi file
Windows 7. Folder containing iTunes was deleted, not uninstalled, now I am not able to upgradeiTunes. continue to receive missing *.msi filre msg. I have unistalled any remainign items from control panel. Still not able to upgrade
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Can't update itunes because of a missing msi file
I can't update iTunes because of a missing msi file? Any suggestions on how to correct this?
Yes it is looking for the iTunes64.msi file
Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Missing .msi...?
Yeah, just got Studio 8 today (YAY), and everything installed
fine, except for Fireworks.
Now, I've had the tutorial installed before and...well, I
tried to uninstall it after it ended, but it said there was a
missing .msi file.
Months later, (now), I try to install it, but first it's
gotta uninstall properly, right?
Well, no can-do. Same error.
Picture...
http://xs510.xs.to/xs510/06521/fireworkserror.pngSaikotic wrote:
> Yeah, just got Studio 8 today (YAY), and everything
installed fine, except for
> Fireworks.
> Now, I've had the tutorial installed before and...well,
I tried to uninstall
> it after it ended, but it said there was a missing .msi
file.
>
> Months later, (now), I try to install it, but first it's
gotta uninstall
> properly, right?
>
> Well, no can-do. Same error.
>
> Picture...
>
http://xs510.xs.to/xs510/06521/fireworkserror.png
>
See if this helps....
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=a4175402&pss=rss_studio_a4175402
chin chin
Sinclair -
ITunes will not load missing MSI network drive message.
ITunes will not load missing msi on network drive message.
tried to reinstall but still looks for install files that are missing.The precise error message would aid a diagnosis, but this article might help:
https://discussions.apple.com/thread/2450004?threadID=2450004&tstart=0
tt2 -
I am trying to update my Itunes and I can't because of a missing .msi file
I keep getting the same message of a missing .msi file. I am not able to uninstall or repair as well. Thanks for any help I can get
Following some suggestions on other thread is was abole to download the Windows installer clean up from this link and it worked. I was able to uninstall and reinstall. Make sure to check for malware. Mine was clean but i can't promise all downloads and that the site is safe.
-
I can't update itunes because of missing msi file
I can't update itunes because of some missing msi file
Following some suggestions on other thread is was abole to download the Windows installer clean up from this link and it worked. I was able to uninstall and reinstall. Make sure to check for malware. Mine was clean but i can't promise all downloads and that the site is safe.
-
Over clocking using core center
over clocking using core center
ok rather a noob at this and thought I would try a safer way of overclocking.
The program ticked away up til 300mhz on the left hand monitor at which point I turned it off as a 50% increase in the FSB seemed rather too much.
Has anyne used this prog or can point me to any documents about what it does!thanks for the info.
the page below.... seems to show that you can over clock from core center on the desk top do I have to change bios setting to manua to alow it to work or is the review a bit
http://www.digital-daily.com/motherboard/msi-kt6-delta/index05.htm -
MSI GX-700x DRIVERS FOR WIN XP HOME SP3
MSI GX-700x DRIVERS FOR WIN XP HOME SP3
PLEASE LINKQuote from: herman.design.studio on 27-August-13, 05:37:17
uz jsem tam kopnul zase win7 64bit profesional na to drivery sou dik
Use English please. -
Nvidia/MSI 61.77 Drivers
Hi
I just downloaded both the Nvidia and MSI 61.77 Drivers, I have the MSI 5900XT VTD 128MB Card, and this card is not even listed in the Readme.txt. How safe is it to use the above mentioned drivers. Currently I'm using the Drivers which came on the CD along with the card i.e 56.xx version. Any help is appreciated.
Readme.Txt:
NVIDIA Display Driver for Windows 2000/XP version 61.77, 07/15/2004
================================================================================
Operating systems supported
Microsoft Windows XP Home
Microsoft Windows 2000/XP Professional
Microsoft Windows 2000 Server
Adapters supported
NVIDIA RIVA TNT
NVIDIA RIVA TNT2
NVIDIA RIVA TNT2 Pro
NVIDIA RIVA TNT2 Ultra
NVIDIA Vanta
NVIDIA Vanta LT
NVIDIA RIVA TNT2 Model 64
NVIDIA RIVA TNT2 Model 64 Pro
NVIDIA Aladdin TNT2
NVIDIA GeForce 256
NVIDIA GeForce DDR
NVIDIA Quadro
NVIDIA GeForce2 MX
NVIDIA GeForce2 MX 200
NVIDIA GeForce2 MX 400
NVIDIA Quadro2 MXR
NVIDIA Quadro2 EX
NVIDIA GeForce2 GTS
NVIDIA GeForce2 Pro
NVIDIA GeForce2 Ti
NVIDIA GeForce2 Ultra
NVIDIA GeForce2 Integrated GPU
NVIDIA Quadro2 Pro
NVIDIA GeForce4 MX 420
NVIDIA GeForce4 MX 440
NVIDIA GeForce4 MX 440-SE
NVIDIA GeForce4 MX 460
NVIDIA Quadro NVS
NVIDIA Quadro4 500 XGL
NVIDIA Quadro4 550 XGL
NVIDIA GeForce4 MX Integrated GPU
NVIDIA GeForce4 MX 420 with AGP8X
NVIDIA GeForce4 MX 440 with AGP8X
NVIDIA GeForce4 MX 440SE with AGP8X
NVIDIA Quadro4 NVS with AGP8X
NVIDIA Quadro4 380 XGL
NVIDIA Quadro4 580 XGL
NVIDIA GeForce3
NVIDIA GeForce3 Ti 200
NVIDIA GeForce3 Ti 500
NVIDIA Quadro DCC
NVIDIA GeForce4 Ti 4200
NVIDIA GeForce4 Ti 4400
NVIDIA GeForce4 Ti 4600
NVIDIA GeForce4 Ti 4200 with AGP8X
NVIDIA GeForce4 Ti 4800
NVIDIA GeForce4 Ti 4800 SE
NVIDIA Quadro4 700 XGL
NVIDIA Quadro4 750 XGL
NVIDIA Quadro4 900 XGL
NVIDIA Quadro4 780 XGL
NVIDIA Quadro4 980 XGL
NVIDIA GeForce FX 5800
NVIDIA GeForce FX 5800 Ultra
NVIDIA Quadro FX 1000
NVIDIA Quadro FX 2000
Where is my card listed above ???
Thanks
Rajivthat list doesnt look very up-to-date to me
If youve just downloaded them from nvidia then yes they should be safe to use
Smallbof -
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
Stoping System Clock using Java code.
Is it possible to do so if yes then some code idea for
Stoping System Clock using Java code.
[email protected]The system clock is controlled from the BIOS, and as such, I don't think even windoze can stop it, though it can be continually reset. I don't believe that Java provides a sufficiently low level of control to set the system clock, although you could use a native method to accomplish the task.
Why would you want to do such a thing?
Maybe you are looking for
-
Period 001/2010 is not open for account type S and G/L 799999
Hi friends I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999. I use the T. Code OB52, i am confuse which combination i.e. variant, A,
-
How can I get my mail to open and close it stopped working
Help! I was able to open and view email last night. I played a new game for several hours and when I went to shut down my computer and it wouldn't allow-it said the mail program was preventing. I tried to open the mail and now it won't open. So I can
-
Popup window or rollover in Acrobat?
Is there a way to include popup windows or rollovers in a PDF document? I'd like to add one or the other in a book where the window or rollover would provide a definition of a term for the reader. Thanks, Karen
-
Migrating to SAP General Ledger (NewGL) on a different box
We are looking at migrating to SAP General Ledger on a production system with over 150 company codes and 10 years of unarchived data. Since this results in pretty large database tables we are looking at several options to minimize business impact. Am
-
Insert data into oracle database using a PHP form
I'm trying to enter data into my oracle database table using a php form. When I click submit no data is added. Could someone help me please. I'm new to php/oracle thing. NOTE: I don't have any problem connecting to the database using php. Here is the