Missing MSVCR71.dll Error Message During Launch

I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch. The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that. I did not write down the error message before fixing the problem). There is an “OK” button below the message to continue loading Adobe Encore.
The error message is only displayed if all other CS5 programs are closed. During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application. The Component can be located here: http://www.xiph.org/quicktime/
When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed. Juicer will run without the Component, but gives a message that it is missing. I have removed the Component since I use Encore to a much greater extent.
To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above. I should also note that I am using Windows 7 Home Premium.

Greetings,
My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime. Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
Control Panel
Windows Firewall
Advanced Settings
Outbound Rules
New Rule...
Program/Next
This program path: (use Windows Explorer to search)
c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
Allow the connection
(Leave checks Domain, Private, Public)/Next
Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
Good luck, Michael

Similar Messages

Missing msvcp100.dll error message

the adobe reader always starts with a system error message about a missing "msvcp100.dll" file (needed for acroRd32.exe). I have to click the OK-Button and the reader starts in a normal way.
I already tried to repair the installation, but it didn't help. I use Adobe Reader version 9.3.3 with windows 7 professional.
Does anybody know how to solve this annoying problem?
thank you
mrbenanzo

In order to fix the issue you may install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.
You may install the latest Microsoft Visual C++ 2010 Redistributable Package according to the Windows 7 versions you are using.
For 32bit: Microsoft Visual C++ 2010 Redistributable Package (x86)
For 64bit: Microsoft Visual C++ 2010 Redistributable Package (x64)

MSVCR71.dll error message

I am trying to run a Backup.1.exe file to restore documents after my hard drive failed. I have copied the backup files from my external hard drive to a different HP computer. Whenever I try to run the application Backup.1.exe, I get an error message that says "This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem."
Any ideas on how I can fix this and get my files off the hard drive?
Thanks,
Brad

Hello Brad 131415:
Welcome to HP's forum . I am not one for downloading these fix it tools. I have Iyogi Technical Support if I ever need them. Not every one can afford them. Here is the search results on bing for fixing
your error http://www.bing.com/search?q=error+MSVCR71.dll&src=IE-SearchBox&FORM=IE10SR&pc=HPDTDF . You are welcome frrw. It did not list any thing from Microsoft. My McAfee's Browser Guard reports every thing listed is safe except Msvcr71 Dll Easy fix RegEasyPro.com on right hand side is a bad website. Everything else on page is green. You are welcome frrw

Satellite M500 - Missing TosHdpAPI.dll error message

I recently installed Quicken 2011 and after install an error message was displayed on Laptop startup:
Can't start application ..........Missing ToshdpAPI.dll.
I am running Windows 7 Pro on a Satellite M500
I there a way of obtaining a new copy of this dll?

Hello
I have a little bit searched using Google and it seems that TosHdpAPI.dll belongs to Toshiba Bluetooth stack software but its strange why this is important for your Quicken program
In your case I would try reinstalling Bluetooth software that can be downloaded here:
http://aps2.toshiba-tro.de/bluetooth/
If it doesnt help you should contact the manufacture of Quicken program. Usually they should know how you can get rid of this error message. Probably they have a patch (update) for this issue.

AVFoundationCF.dll error message at launch after updating to iTunes 10.1

Hey,
I did About>Check for updates and installed the 10.1 update and now whenever I try to open iTunes I get the following error:
The procedure entry point AVCFAssetTrackIsExcludedFromAutoselectionInTrackGroup could not be located in the dynamic link library AVFoundationCF.dll
I have tried downloading the full itunes 10.1 64bit installer from the web and installed that but it still shows the same error.
How can I fix this?
Message title was edited by Host

Had the same problem and this worked for me.
This is for Windows XP and may work for others but I don't know for sure.
I checked my Apple Application Support version under the Add Remove programs and it was 1.3.2
I uninstalled it.
I used WinRar to unpack the iTunesSetup.exe then I installed the AppleApplicationSupport.msi file.
Everything work after that.
Hope this helps.
PS This happened on the last upgrade to iTunes as well so...

Uninstalled Old PS Versions - Now Get "One Or More File. . .etc" Error Message When Launching PS CC

I just unistalled PS C3 through 6 on my computer leaving only PS CC for use going forward. Having done this I now get this error message when launching PS CC: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop." The thing is PS CC still appears to be working okay once that error message is cleared. How can I get rid of that error message? I can't reinstall using the CC Updater because it still sees PS CC on the system thus it won't install another copy. I'd just as soon not uninstall it and I'm not sure that would fix the issue anyway.
Any ideas?

Hi jpolster,
You can uninstall PS CC through the Control Panel in windows/Utilities in MAC & the reinstall PS CC.
Thanks

Error Message on Launch

After installing the latest version of AE (10.0.1) on my Mac Pro (OS 10.6.6 [a totally clean erase and install this week], 32g RAM, 2 x 3.2 GHz Quad-Core Intel Xeons with 6T of internal disk space), upon launching the software, I get this error message during the splash screen when "scripting" appears in the splash screen, before the app opens:
After Effects error: invalid DICT array size ( 83 :: 2 )
I click on OK and the error message goes away, and AE seems to run, but I don't want a giant surprise one day when the whole system goes up in smoke because something is really wrong.
I've uninstalled and re-installed 3x. I've rebooted multiple times. I've found this exact error message mentioned in a google search, but one is written in Russian (I think) and the other in French.
I have Photoshop Extended from CS4 and the web apps from CS3 on the same machine.
Your help would be appreciated.

That error message doesn't tell much all by itself. It says that one of a somewhat broad set of components has returned an invalid value, and that's it.
You say that everything seems to be running OK?
Try this: Try importing a PSD file. The reason that I suggest that is that one of the components that uses the kind of code that could return that message is the library that After Effects uses to load and render Photoshop items.
It's pretty late on a Friday evening, and Monday is a holiday, so I don't know how much useful troubleshooting we're going to get accomplished right away. Please do report back on this thread if the application fails in some way beyond this error message. If there's a specific failure, then we'll have more to go on.
BTW, since you're new to After Effects, I strongly recommend starting here, where there are lots of free materials for learning the basics:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

Qt5Gui.dll error message

Since 10 Jul 15 whenever my laptop boots up and all icons or shown on desktop, the error message -"The program can't start because Qt5Gui.dll is missing from your computer. Try reinstalling program to fix the problem".How do I reinstall this program? Thank you.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv6-6c10us Notebook and issues with Qt5Gui.dll error message on startup. I have search this and is seems to be a phone issue. Have you added some software for a cell phone? If this is what is causing this issue you could uninstall the software. Here is a link to show you how to do this. If that did not help, you can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I would recommend a restore point before the 10 th, maybe something around the 5 th or so. When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.Here is a link to check the device manager for errors with drivers. If there is a driver with an issues in your Device Manager, this could be causing an issue. Here is a link to show you how to resolve this, if you need it.
Please let me know how this goes. Thanks.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USN

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Missing MSVCR71.dll Error Message During Launch

Similar Messages

Maybe you are looking for