Missing music after software update

What happened to my music after software update ?

Try these directions
http://support.apple.com/kb/TS1967
Except in step 7, I recommend copy & pasting instead of dragging.

Similar Messages

Missing Apps after software update

how can i move apps to iphone after software update?

Connect to itunes, make sure that under the apps tab that apps are checked to sync, then click sync at the bottom.

Missing contacts after software update

Contacts in iphone 4S disappeared over night after software update. It is only showing contacts from my social sites such as facebook.

Did you back up to the cloud, itunes, or email (like hotmail) before you updated? If so, they are easily recoverable. If not, then bye bye.

Missing emails after Software Update

Hi all,
I seem to missing a large chunk of emails in my Inbox after a recent Software Update. This is only in my Inbox. My Sent mail seems fine. Before the update, my Inbox had around 8000 emails. Now it hovers around 600.
I looked at my Home>Library>Mail>Mailboxes folder. There, it says the size is 110 MB and was last modified on today's date. That tells me all 8000+ emails are still in there, but they just aren't being displayed. I tried Rebuilding the mailbox a while back, but that offered no solution.
Any advice?
Many thanks,
Jon

Try these directions
http://support.apple.com/kb/TS1967
Except in step 7, I recommend copy & pasting instead of dragging.

MISSING PICTURES AFTER SOFTWARE UPDATE

I recently did a software update on my HTC Thunderbolt and now I notice that I am missing some of my pictures. It's the ones I saved to my SD card from my messages. Is there any way for me to retrieve them???

Thank you to the community for your engagement. Your help is very much appreciated.
sabs318, are those the only pictures missing? Are the pictures taken from your camera saved on the SD card? Have you checked if they are saved on the device memory?
Did you try acraftlady's suggestion?
Please let me know.
Thank you,

Problem with iphone4 music after software update

Updated software on my iphone 4 on 3/22/13. Now, my entire music library on my phone is in icloud format and must be downloaded. Discovered this while flying cross country. Grrrr.
Why did this happen and - more to the point - how can i get my music library to sync normally again so it's simply on my phone and ready to play?
Thanks.

I phoned my provider as requested and they have advised me that it is necessary to send my brand new phone in for repair. I honestly don't know if they have opened a support ticket. I do thank you for your prompt assistance thus far, however, I am none too impressed with this situation. I hope the next software update doesn't cause more problems, so far the phone isn't worh the contract it's written for when it comes to user friendliness, app availability, or user options. I was hoping for better from BlackBerry this time around.

Iphone 4 missing music after ios6 update

Since I have updated my IPhone 4 with IOS 6 it has not functioned well at all. Music is missing (but on Mac, Ipad1, I touch 1), 70%of apps in waiting, phone says I am not subscribed to ITunes match (which I am). Funny how my touch and pad are fine because they could not be updated (IOS 5 still) and yet my phone is messed up. I contated customer support and they are stumped as well. Any suggestions?

Even more strangely, all the albums I have checked in iTunes on my iMac show in "Music" but almost all the songs are greyed out, with a few random ones showing. When synching the iPhone to theiMac a long blue bar indicates that the music is there but it doesn't transfer to the iPhone. The files on the iMac play fine via iTunes on the iMac.
I have done a full "Restore" but nothing seems to work.
Any ideas?

Transferring music after software update

i recently upgraded my software on my iphone 4 and lost all of my music. the songs that i had were backed up on to an itunes on my old hard drive, which i no longer use. is it possible to get the music from my old itunes on to the new hard drive and my iphone?

Try these directions
http://support.apple.com/kb/TS1967
Except in step 7, I recommend copy & pasting instead of dragging.

After software update (Sept. '09) apps don't work and some missing

Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!

expresso3 wrote:
yes i am fully aware of that!!!
This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
the post says "after software update (sept. '09) apps don't work and some missing"
there has been no update in sept 09!!!!
Perhaps the OP doesn't connect the iPhone to the computer very often.
Phil

Arabic language disappeared after software updater...

Yesterday night I decided to update my mobile software using nokia software updater to solve a performance issue as mentioned in the website.
I took a full back on my MMC then started the update.
My mobile software version was 1.00.XXXXX and the new release is 4.XXXXXX
The update completed successfully, but after I restarted the mobile I was shoked of the following issues :
- The arabic language disappeared from the phone lagnauge selection.
- MMC requested a passrowd to ulock it !!! while I dont remember that I set a password for it or I may set it once long time back but I forgot it now.
I'm surprized for what happened as I had a discussion last night with my father regarding Nokia trust relation ship .
Please advice how can I solve my issues ASAP.
All my contacts are backed up on the memmory .

read this :
/t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

A big deal of data lost after software update

Hello,
Hopefully someone will look into this problem. I have seen also here other reports of losing data after software update.
I have a Nokia N73 Music Edition. Before I updated the firmware, I used Nokia PC Suite to backup all data in the phone memory as well as the phone settings. After a successful update, I tried to restore the backup. No error occured during the restoration. However, I found out many things hadn't been brought back to my phone, such as messages, notes, as well as landmarks that I saved in Nokia Maps.
I want to know what is going on and if there is any hope to get back those lost pieces. Thank you!
Best regards,
Wei

Sorry if your husband didn't backup your phone either to iTunes or icloud prior to updating your phone, then those data is gone.

Restoring contacts after software update

After software update i accidently clicked something like "treat as new iphone" instead of "use existing settings". Now I can synch programs and music but my contacts are gone. Is there a possibility to restore them?

Unless you have been syncing your contacts with an app on your computer (Outlook, Mail) or cloud (MobileMe, Yahoo, Gmail, Exchange) as you should have, the contacts are permanently gone.

Problem restarting after software update

Computer is fine, drive 40% full, no speed problems...
But it just won't restart after software update runs, nor will it restart or shut down from finder.
Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
ANy ideas folks?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Ipod touch4g is not detected in pc and itunes after software update

after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Missing music after software update

Similar Messages

Maybe you are looking for