Missing NetworkFolder by 2 users after upgrade 1.1

After the upgrade form 1.0.1 tot 1.1 some users "lost" one specific netfolder (the complete folder not a subfolder).
File rights are give by a AD group.
All the other users whitin this group still see the netfolder.
There are no changes at AD file rights or group memberships.
Users have access to the folder using the drive mapping at there client.
Taken actions:
- checked groupmembership in Filr
- removed and added the security group in the Netfolder config.
- removed user form Filr and recreated him through the ldap sync.
- checked the Famt and Filr log at the Filr Appliance no error's to this user or folder
Any idea for throubleshooting?
Regards,
Sander

I removed the networkfolder and recreated him, unfortunatly no result.....

Similar Messages

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Hey DebC2001,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with iMessage. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Missing table variants in SE16N after upgrade from 4.7 to ECC 6.0

After Upgrade to ECC 6.0 ,certain variants for standard tables like MARA,MARC,EINE,EINA etc....in SE16N are missing.Can anyone help me to restore the variants.
Thanks in advance
Preethi .

If you didn't save them they are gone - you can't restore them if you didn't run the report before (from where do you want to restore?)
On top of that, if you have tables, that changed during the upgrade, the variants won't work any more.
I suggest you write a report or use queries to get your data instead of using SE16N.
Markus

Not able to reset password of users after upgrading to 12.1.2

After upgrading a VISION Demo instance from 12.1.1 to 12.1.2 I am not able to change the passwords for existing users. SSO is not used.
When I go to Users form and query the user the password feild is greyedout and I get the error frm-40200 feilds is protected against update.
Everything was fine before the upgrade and the upgrade went fine without any issues.
Thanks!

Ravi,
Please mention the database version and the OS.
Can you reset the password using FNDCPASS?
Please see if these docs help.
Note: 469596.1 - FNDSCAUS Form Password Field Is Protected Against Update After ATG RUP5
Note: 395531.1 - System Administrator Unable To Reset User Password
Thanks,
Hussein

Missing photos in Time Machine after upgrading to Lion 10.7.2.

After upgrading to Mac OS X LION 10.7.2. (11c74) all my photos are missing when I open TimeMachine.
There is only a iPhoto icon - NO PHOTOS.
Where are they? Heeeelp

olegz,
First, thanks for the clear graphics.
Authorization seems to be the hangup here. But instead of dealing with the complications of conflicts in authorization, which might take several weeks to months to iron out - site by site - I urge you to follow a different path.
It looks like you're using Chrome. For this site alone, use either Safari or Firefox, both of which are more likely to have plugins to deal with authorizing your site. Safari is already on your computer, but v.3 of Firefox is stable, too. Frankly, I can't tell you what specifically might be the problem here; but switching browsers will solve the immediate problem.
Sound good? Not so good? Post in this thread so that I or others can solve your problem once and for all!

I am missing some of my contacts after upgrading to iOS 6

I am missing some of my contacts in my iphone4 after upgrading to iOS 6. They are still in the memory but how to retrieve them.

What do you mean "they are still in the memory"? What memory?
Here's a test to perform - using a computer's browser, log into icloud.com and go to the Contacts page. If they are gone, then they are gone (must have been a setting during the update to iOS6).
If they show up, then the problem is that your device is not connecting to the Contacts database on icloud.
On the device, go to Settings>icloud. Be sure icloud is on and using the right ID. If not, scroll to the bottom of the page and tap Delete Account - this just disconnects the device from that account, no data is lost. Then log back in using the correct ID. ALSO - be sure the Contacts are turned on (on the same screen).
Note: Contacts are not part of an iCloud backup, since they are part of contacts database on iCloud's servers.

I miss artwork on my ipad after upgrading to ios 5

I miss album cover artwork on my ipad after upgrading to ios 5, although all artwork is correct in itunes and was correct before upgrading

Try to connect your iphone in computer, in itune restore the iphone as a new one. (it worked for me)
Or delete your contacts app from iphone and sync again.
Good luck
Geraldo Ramires

"Artists" category is missing on iPod Touch Music after "upgrading" to iOS 6

After "upgrading" my iPod Touch to the "latest and greatest" iOS 6, Music no longer has an "Artists" category. Instead, it's been replaced by a second "Albums" category. Yes, that's right - I now have two "Albums" buttons in Music, instead of an "Artists" button and an "Albums" button. Is this just a glitch on my device, or is this a bug in iOS 6? I don't see how something so obvious could have slipped through product development and testing.

That is probably a glitch. Try a hard reboot by holding down the home and power buttons at the same time until you see the black screen with the Apple logo. Then release the buttons. If that doesn't work, try restoring your iPod.

A different way to deal with "unknown" user after upgrade from Tiger.

It's a known issue that doing upgrade and install or archive and install from Tiger to Leopard, produces a lot of folders with "unknown" group in their "get info" panel. This has to do with a different group structure in Tiger and Leopard.
In Tiger, every user has their own private group with the same name as the username. That group is set to be user's primary group.
In leopard, every new user with an account is a member of the group staff (gid=20) which is not present in Tiger. Leopard doesn't fully understand Tiger's private group structure, hence the "unknown" group. This causes various problems such as Finder crashes when trying to change the permissions and ownership in the get info window.
Apple's proposed way of dealing with this is described [here|http://docs.info.apple.com/article.html?artnum=307128].
However, this method doesn't change the existing group structure and doesn't resolve all the problems.
I'd like to suggest a different way of dealing with it.
1. create a new admin user (if you don't have one already), log out of your primary account and log into the new one.
2. enter the following in terminal:
*sudo dscl . delete /users/"username"*
where username is the short name of the user on the main account (not the one you are currently logged into).
This will delete that user.
3. Log out/in.
4. go to system preferences->accounts and create a new user with the name and short name exactly as the one you've deleted in step 2.
You'll be get a popup saying that a home directory by this name already exists and asking if you want to use it. Say "Yes".
That's it. Your main user will be recreated using the native group structure of Leopard with gid=20(staff). Permissions on your home directory will be reset with correct group and ownership.
I tested the process on my powerbook after an upgrade and install from Tiger to leopard and it worked without a hitch.
I like this method better than Apple's because it completely gets rid of Tiger's group structure which was creating all the confusion. The only downside as far as I can see is that you might have to manually change the group ownership on some files belonging to the main user that sit outside your home directory.
I would appreciate any comments on this.

hmm, I confess, I did this before installing 10.5.2 so i can't say for sure. However, I've dealt with a few people (see e.g. this [thread|http://discussions.apple.com/thread.jspa?messageID=7012957]) who are running 10.5.2 and still have this issue. I don't know what if anything 10.5.2 did about this but I'm quite sure that it didn't change the group structure inherited from Tiger.
Message was edited by: V.K.

Missing Projects in iMovie 09 after upgrading to Mavericks

Using iMovie 09 (8.0.6)
Before Mavericks came out I moved (copied) my iMovie Projects and Events to an external hard drive (from within iMovie, not the OS).
Everything was where it should be and worked properly after I was done.
My first time back into iMovie since upgrading to Mavricks and now my projects are missing in iMovie. The projects are present on the external disk in the OS, but they don't show up under the external drive from within iMovie's Project Library window pane. The events are present on the external when viewed from either within iMovie or the OS.
I've found the solution to delete the UpdatedToiMovie10 file, but since I didn't upgrade iMovie, that's not an option for me.
Anybody have any ideas?

I do suspect there must be some incompatibility between Mavericks and iMovie v. 8 because all was working in your previous operating system (was that ML, Lion or Snow leopard?) and the OS upgrade should not have touched your Projects folder (it is still at the root level of your external drive isn't it?.
Did you get iMovie 10 when you upgraded to Mavericks? (I suspect not because you would have needed to have iLife '11 and then you would have had iMovie 9). I am wondering whether iMovie 10 would be able to see and update your missing projects. Trouble is that would be a $15 (I think) gamble which may not pay off.
(Actually iMovie 9.0.9 doesn't launch at all under Mavericks on both of my Macs for reasons I still don't understand - for most people it works OK) but I was able to update projects to iMovie 10 and have now moved on to FCP 10.1.
Geoff.

Missing all photos and events after upgrading to Photos from iPhoto

I just upgraded to photos from iPhoto.
When I opened Photos for the first time it asked if I wanted to move / import from iPhoto to the new photos app I said yes.
A message came up that said that I needed to repair the permissions on my iPhoto library I said ok.
When the library opened in Photos there was nothing there. It was as if the library was brand new with instructions on how to add images and events. I went to iPhoto to open the library. Same thing iPhoto now looks like new with information on how to import photos and create events!
Where are all of my images?
How do I get them back?
Thanks!

HA! User Error. Supper embarrassing. So... Is there a way to delete this request?

Attachments appear missing in CRM 7.0 after Upgrade from 6.0

We use CRM for SSMS functionality to create help desk tickets which can have documents attached to them which are stored in and retrieved from content server.
All was well in the land of CRM 6.0.
Since the upgrade to CRM 7.0, when viewing an SSMS ticket, the link to an attachment does not appear on the screen. Also, a new attachment can not be created.
I am looking for help related to this from a couple different viewpoints.
a) Has anyone experienced something like this and if so, what was the resolution or what have you learned so far.
b) In our ERP system, we use transactions like CV04N to search for document information records and subsequently view the documents the DIRs are linke to in our content server. CRM does not have a CV04N transaction. Is there an equivalent / similar transaction or program in CRM that I can use to view DIRs and even display a document from our content server via CRM?
James

For the issue that the "Create attachment from template" is grayed out in an upgraded CRM system, the templates will need to be recreated in the new environment.
Login to CRM WebClient as the standard salespro role
Navigate to Sales Operations -> Document Templates
Click New and recreate all of the templates used in the previous version
After this is done, the create attachment from template link will be enabled.
In CRM, when you add attachments through the regular "attachment" link, there is a section that allows you to browse the content management server and all the documents. You should check if all the previous documents are still there.

Links Missing Under Travel And Expenses After Upgrade To EHP3

HI,
We have upgraded our ECC 6.0 to enhancement package 3 and our portal to BPERPESS 1.3, now the links under travel and expenses are missing, we were having all the links under it before upgrading the ECC 6.0 to enhancement package 3. Is there any configuration missing on the ECC side, please advice.

Check in SDM whether the Business Package has be update successfully. there may be some problem during the deployment of Eh P3

How to recover missing content of mail folders after upgrade to Maverick?

When I upgraded my Mac computer to Maverick I lost the content of my mail folders. The folders are there but there are no emails filed in them.

Try to re-index:
Repair & Reindex All Messages in Mail app
You may encounter an alert from Mail app telling you that the mailbox must be repaired, but you can also do this manually. This is particularly helpful if the search functions of the Mail app have become unreliable.
Quit out of Mail app and go to the Finder
Hit Command+Shift+G and go to the following path:
~/Library/Mail/V2/MailData/Delete every file that begins with “Envelope Index” (optional but recommended: back up these files to the desktop just in case something goes awry)
Close the MailData window, then relaunch Mail app to force reindexing
Like rebuilding the mailbox, the reindexing process can also take a while, depending on how large the mailbox is and how much mail is stored on the computer. Be prepared for a lengthy re-indexation if you have tons (thousands+) of messages in Mail app. When finished, try the search or perform the task that you had issues with before and things should be working as usual again.-These two solutions will fix most common mailbox related issues encountered in OS X Mail, so try them out the next time Mail app is performing strangely. On the mobile side of things, iOS does not have similar forced rebuilding and reindexing options, and thus to resolve similar issues you often have to remove the account from iOS Mail settings and then re-add it to resolve like problems, but that’s a topic for another article.

TACACS "fail unknown users" after upgrade to ACS 3.3

Basic config issue is :
1) User Account is added to ACS 3.3
2) User Account is added to Group with correct Privilege Levels
3) User Password Authentication: is listed as "Windows Database"
4) TACACS+ Enable Control: is set to user group settings
5) And TACACS+ Enable is also set to "Windows Database"
In External DB all windows Domains are listed (but not down to specific group mapping)
Here is the problem, every thing works fine.
Users can log onto router in User mode (using domain password) & change to EN mode (using domain password)
As long as the "Unknown user policy" is set to check against "Windows". this works.
But if it is set to "fail Unknown users" then no one can gain access

Hi Michael,
We opened a TAC case ans was given the following info;
CSCef84196
First Found-in Version 3.3(1)
Symptom:
users created on acs but mapped to external DB manually fail authentication
Condition:
-this happens when unkown user policy is set to fail authentication attempt.
Workaround:
- set unkown policy to check external database.
if dynamic users aren't desired to authenticate, you can map the external DB to a disabled group.
and put the manually mapped users in an enabled group.
Ther is no fix available yet!

Missing NetworkFolder by 2 users after upgrade 1.1

Similar Messages

Maybe you are looking for