Missing new Basic sliders and more...

Very weird problem- I'm missing several of the new features in my LR4 Beta. They show briefly and then revert to the old sliders. The Develop module has the old (LR3) Basic sliders (E,R,F,B)- BUT when I launch LRb4 into the Develop module you can see the new sliders (H,S,W.B) for about 2 seconds and then it reverts to the old ones.
I'm also missing the new selective WB- the old (LR3) adjustment brush sliders are there. Also missing soft proofing the Print module. There may be others as well but this is what I've noticed so far.
FWIW The Map and Book modules are there.
I'm running OS X 10.6.8 on a MacBook Pro 2.4GHz Core i5. I quit all apps and restarted before installing. Have tried trashing prefs files (the 2 .plist files) and restarting.
Any suggestions and advice appreciated.

Thanks! Works perfectly. I suppose that was probably in documentation somewhere that I didn't read...

Similar Messages

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

New Pages Ready (and more to follow)

Hi Everyone,
I have not been here that much recently.
The reason has been I have been working on the Website a fair bit.
It has a new layout and now consists of 300+ pages with more to come.
It now has a Version Section which at present has stuff on iChat 1 through 3 including pictures for each version.
The Site is Index via Atomz and can be searched.
I hope you find it useful and I will be back full time soon (after completing the iChat 4 stuff and hopefully before Snow-Leopard gets released).
If you find any bad links or quirks can you use the email link on the site so that I know where it came from.
11:14 PM Tuesday; November 18, 2008
Message was edited by: Ralph Johns (UK)

Now has iChat 4
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:09 PM Friday; December 12, 2008

E51 : a strange new icon appears and more ...

few days back i had updated my one year old almost perfect E51. Prior to the update the only problem i would face was auto restart during long EGPRS data sessions(no 3G in India yet). After the update i observe that the auto restarts have reduced, the phone bootup time is prologned almost doubly and to it seems the voice call quality has gone a little down on both ends.
Also after several new application downloads i have suddenly noticed a new ICON permanently appearing just below the Battery level indicator on the Home Screen. The new Icon shape is a TRAY (horizontally laid square bracket of keyboard) with a vertical upwards pointing ARROW in the middle of the TRAY.
any idea what this icon stands for.
Thanks,
Solved!
Go to Solution.

I think you have some messages in your Outbox..
N80 IE, E51, E71

[svn:fx-trunk] 12871: More new Spark acc impl files were missing svn: eol-style and svn:mime-type properties.

Revision: 12871
Revision: 12871
Author:   [email protected]
Date:     2009-12-11 15:53:28 -0800 (Fri, 11 Dec 2009)
Log Message:
More new Spark acc impl files were missing svn:eol-style and svn:mime-type properties.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: None
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ButtonBarBaseAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/TabBarAccImpl.as
Property Changed:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ButtonBarBaseAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/TabBarAccImpl.as

More Guru Winners for February 2015 in the Small Basic category and many others!

It's been a busy week that also saw the
TECHNET WIKI SUMMIT 2015
Then we had the results for
February's TechNet Guru competition ALSO posted!
http://blogs.technet.com/b/wikininjas/archive/2015/03/19/technet-guru-february-2015.aspx
Below is a summary of the medal winners for December. The last column being a few of the comments from the judges.
Unfortunately, runners up and their judge feedback comments had to be trimmed from THIS post, to fit into the forum's 60,000 character limit, however the full version is available on TechNet Wiki in the link above.
Some articles only just missed out, so we may be returning to discuss those too, in future blogs.
BizTalk Technical Guru - February 2015
Steef-Jan Wiggers
BizTalk Server 2013 R2 Instrumenting a custom pipeline component with ETW
Mandi Ohlinger: "Always a fan of helping our custom pipeline users. Great addition to this group."
Sandro Pereira: "Images, format, descriptions, code and topic are excellent once again good work Steef-Jan."
Vignesh Sukumar
BizTalk BAM (Business Activity Monitoring)
Sandro Pereira: "Great job on this article! Well explained and nice pictures, however the article format need to be improved and some proofreading is need"
Mandi Ohlinger: "Welcome to the 'I heart BAM' fan club. Nice job on this topic. A MUST read for new-to-BAM users. "
Steef-Jan Wiggers
BizTalk Server 2013 R2 Instrumenting BAM Activity Tracking with ETW
Sandro Pereira: "Images, format, descriptions, code and topic are excellent once again good work Steef-Jan."
Mandi Ohlinger: "ETW for BAM Activities - LOVE it. Nice use of the Framework. "
Forefront Identity Manager Technical Guru - February 2015
Wim Beck
FIM2010: Filter objects on export
PG: "Simple, targeted but nice article, nice layout. "
Søren Granfeldt: "Nice. Would be perfect with a complete code sample."
Microsoft Azure Technical Guru - February 2015
saramgsilva
Azure Mobile Services: How to see the log files in server
JH: "Log files are one of the most important things in a production environment. This article shows hows you can do that for the Azure Mobile Services in a nice and easy way."
Alan Carlos: "Great article!"
Ed Price: "Very useful topic! These are a great set of articles!"
saramgsilva
Azure Mobile Services: How to see the WebConfig file published
Ed Price: "Great detail and fantastic use of images! I love all the in-line links!"
JH: "Sometimes it is hard to tell when working in a multi-environment what configuration was published to the Server. The article shows short and easy how to do that for the Azure Mobile Services."
Miscellaneous Technical Guru - February 2015
Arleta Wanat
Retrieve all site mailboxes in your Office 365 tenant
Durval Ramos: "This article has a well content, images and code that help to understand the solution. It has References and was Translated into more two languages. Good job!"
Richard Mueller: "Good links. A great tutorial."
Andy ONeill
Silverlight: No Need to BringIntoView
Durval Ramos: "A well formatted article is easier and more pleasant to read. This script is useful"
Richard Mueller: "Good demonstration of a new feature."
Chen V
PowerShell : Enable Auto Reply for Shared Mail Box
Durval Ramos: " A good solution originated of TechNet Forum. The script and images make it easy to understand and ensure you get the best interest to reader."
Richard Mueller: "Good documentation of this feature."
SharePoint 2010 / 2013 Technical Guru - February 2015
Geetanjali Arora
SharePoint Online : Performing Batch Operations using REST API
KB: "Very well explained article on a new and much awaited feature. Although Andrew Connell already explained this topic in several posts, this article still contains added value."
Ed Price: "I love the History section. The formatting is amazing. And the References and See Also sections at the bottom are great icing on the cake. This is an important topic that's done incredibly well!"
Matthew Yarlett
Using the SpellCheck Webservice with the TinyMCE Richtext Editor and
AngularJS in Office 365
KB: "I read this article with growing interest, it contains a lot of added value. Very well and in-depth explanation. "
Ed Price: "Great scenario! Good use of images, code, detail, and References! Could possibly use a greater breakdown and explanation of the code. This article just gets more and more interesting and valuable as you read it! Great job!"
Arleta Wanat
SharePoint Online: Turn on support for multiple content types
in a list or library using Powershell
KB: "Really nice, interesting and detailed article!"
Ed Price: "The Content Types section helps explain this a lot! I also love the downloads at the end. What a fantastic resource!"
Small Basic Technical Guru - February 2015
Nonki Takahashi
Small Basic: Key Input
Michiel Van Hoorn: "Great improvement."
RZ: "Very nice explanation and examples of key input handling"
Ed Price - MSFT
Small Basic: The History of the Logo Turtle
RZ: "Turtle (Logo) was the first programming language for many, including perhaps some of the Small Basic prorammers. Nice article explaining the history."
Michiel Van Hoorn: "A nice background article and hopefull inspiration for those who want to start in robotics"
Nonki Takahashi
Small Basic: TechNet Wiki Article List
Michiel Van Hoorn: "This is great! Perfect as a local cache of the articles. "
RZ: "A good example"
SQL BI and Power BI Technical Guru - February 2015
Sylvain PONTOREAU
PowerBI API in .Net
RB: "Great walkthrough. Looking forward for the WP8 version of the app ;)"
PT: "Sylvain, very nice job with this. This is a timely topic about an emerging product that has great potential. This is a very good example of a well-written post on an interesting subject with enough information to be valuable to a
solution developer. I will personally take time to explore the Power BI API and use your examples. "
SQL Server General and Database Engine Technical Guru - February 2015
Ronen Ariely
SQL Server Books Online
AM: "Thank you for sharing this with us. It is quite informative and let us get familiar with BOL after the change from previous versins."
Ed Price: "Nice! A very helpful introduction to Books Online! It also tells my technical writer friends that their hard work is appreciated! =^)"
Durval Ramos
How to Collect Events and Errors on SQL Server
Ed Price: "Fantastic solution! A great resource that's amazingly well written with formatting, clear parameters, images, References, and a See Also section! And it even comes in Portuguese! Great article!"
AM: "Thank you for sharing this with us. A good source to learn about our SQL Server instances. "
System Center Technical Guru - February 2015
MarkusEliasson
Troubleshoot ID 32008: DPM cannot
protect this SharePoint farm...
Ed Price: "An important topic that's very clear with great formatting and a good use of an image!"
t.c.rich
Managing Priorities of Client Polices and A/V Policies in SCCM
Ed Price: "I love the descriptions, breakdown of sections, and code formatting! Great article!"
Mr X
How to copy SMSTS.log when a Task Sequence fails in SCCM
Ed Price: "A very helpful table and a good contribution to the community! Mr X again thinks of important content gaps to fill!"
Transact-SQL Technical Guru - February 2015
Saeid Hasani
T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
Richard Mueller: "Good use of Wiki guidelines and great examples."
Ronen Ariely
Free E-Books about SQL and Transact-SQL languages
Richard Mueller: "An excellent collection and a great idea."
Durval Ramos: "A good initiative. Very useful !!!"
Ricardo Lacerda
Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
- Accumulated Earnings
Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
Richard Mueller: "A new idea that can be very useful. Grammar needs work"
Visual Basic Technical Guru - February 2015
Emiliano Musso
Genetic algorithm to solve 2D Mazes in Visual Basic
MR: "Great article! Love to see an application for AI in a simple game"
Durval Ramos: "This article is well documented with images and your code clarifying important details. It also has References, a very useful video and your project available for download in "MSDN Code" !"
Richard Mueller: "Incredible concept and code. Grammar needs work."
Paul Ishak
MultiHeadedTrackBar Control
Durval Ramos: "Very interesting article, with methods and properties well documented. Your project was available in "MSDN Code" which facilitates the understanding of solution."
Richard Mueller: "Amazing work. Extensive code but with lots of comments. Needs a TOC"
tommytwotrain
Using Trigonometry to draw graphic curves in VB.NET part 2.
MR: "Great continuation. Love the usage of the code for circle text"
Durval Ramos: "The article is interesting, but It's need to work better commenting about assemblies referenced on project and also structure your content into sections."
Richard Mueller: "Good tutorial and example code demonstrating basic concepts. Avoid first person."
Visual C# Technical Guru - February 2015
Magnus (MM8)
C#: Enumerating collections that change
Jaliya Udagedara: "Great article. Has a thorough and to the point explanation of problem and the solution with code samples. Loved it!"
Carmelo La Monica: "Very useful and exhaustive about errors at runtime in these circumstances. Congratulations"
Andy ONeill
c#: Practical Poly
Carmelo La Monica: "Fantastic artcle. Very detailed and exhaustive, congratulations ."
Jaliya Udagedara: "Definitely worth reading this. Explains somewhat advance topic along with a fundamental concept of programming. "
Wiki and Portals Technical Guru - February 2015
Durval Ramos
Wiki: Microsoft Short URLs Personalized by SXP
PG: "Nice idea, lots of potential to grow, really needs some more community attention."
Richard Mueller: "An excellent idea. Good use of Wiki guidelines."
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Windows PowerShell Technical Guru - February 2015
Richard Mueller
Document Your Active Directory Organization
Alan Carlos: "Wow! Great article, congratulations!!! Very detailed!"
Chen V: "Excellent Article - I liked return to top as well."
Ed Price: "Wow! It's like a professional whitepaper! It's a valuable topic that's done with intricate detail! I love the images, diagrams, code blocks, and it ends very well with more resources and Wiki articles! The article just keeps
digging deeper and deeper! Awesome job on this!"
DexterPOSH
PowerShell + REST API : Invoke-RestMethod Gotcha
Chen V: "Good Article. TOC might have made this more rich! "
Ed Price: "This is a good topic with some great content. It could benefit from sections and a TOC, as well as a References and See Also sections at the end. The inline links are helpful. Could "
DexterPOSH
PowerShell Trick : Search & highlight text in MS Word
Ed Price: "This is a great solution, with some helpful Q&A in the comments!"
Windows Presentation Foundation (WPF) Technical Guru - February 2015
Andy ONeill
Lookless Controls
KJ: "WPF can definitely be confusing when devs first encounter it. Like the way you break it down."
Ed Price: "Wow! Fantastic explanations that are very clear and deep! The images and code bring it to life!"
Andy ONeill
Only One Parent
KJ: "Same iwith this one, good 101 intro"
Ed Price: "Another great tip! I love the detail here as well! Those snippets help a lot!"
Andy ONeill
Bind to Current Item of Collection
KJ: "Feel like this topic has a lot of coverage out there, but it can't hurt to hammer on databinding yet one more time :) "
Ed Price: "Fantastic topic with great execution! Although these could benefit from References and See Also wiki sections at the end, the Inline links help a lot!"
Windows Server Technical Guru - February 2015
Mr X
Ping for Beginners
Mark Parris: "A good introduction with additional content."
JM: "Great article idea and an excellent article that will be useful to many, thanks for your contribution."
Philippe Levesque: "Good article that show a usefull utility for basic troubleshooting"
Richard Mueller
Active Directory: Get-ADFineGrainedPasswordPolicy Default and Extended Properties
Mark Parris: "An Interesting insight on FGPP and their extended properties."
JM: "This is a good piece of detailed information about this PowerShell cmdlet, thanks for sharing."
Philippe Levesque: "Great article ! Illustrating some cmdlet's output when a user got assigned policy versus a user with the default domain policy could be a good idea."
Richard Mueller
Active Directory: Get-ADServiceAccount Default and Extended Properties
Mark Parris: "A useful nugget of information."
JM: "More very useful information about an AD cmdlet, thanks!"
Philippe Levesque: "Good article !"
As mentioned above, runners up and comments were removed from this post, to fit into the forum's 60,000 character limit.
You will find the complete post, comments and feedback on the
main announcement post.
Please join the discussion, add a comment, or suggest future categories.
If you have not yet contributed an article for this month, and you think you can write a more useful, clever, or better produced wiki article than the winners above,
THERE'S STILL TIME! :D
Best regards,
Pete Laker
More about the TechNet Guru Awards:
TechNet Guru Competitions
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

Congrats to Nonki and ME!!!! =^)
Small Basic Technical Guru - February 2015
Nonki Takahashi
Small Basic: Key Input
Michiel Van Hoorn: "Great improvement."
RZ: "Very nice explanation and examples of key input handling"
Ed Price - MSFT
Small Basic: The History of the Logo Turtle
RZ: "Turtle (Logo) was the first programming language for many, including perhaps some of the Small Basic prorammers. Nice article explaining the history."
Michiel Van Hoorn: "A nice background article and hopefull inspiration for those who want to start in robotics"
Nonki Takahashi
Small Basic: TechNet Wiki Article List
Michiel Van Hoorn: "This is great! Perfect as a local cache of the articles. "
RZ: "A good example"
Also worth a mention were the other entries this month:
Small Basic Known Issue: 29976 - Assignment to Array in Event Handler Needs Time by
Nonki Takahashi
RZ: "This is a very good catch. The workaround mentioned is very helpful."
Michiel Van Hoorn: "Ah, very helpfull if you ever bumped into this"
Welcome to Small Basic by
Nonki Takahashi
Michiel Van Hoorn: "Nice greating"
RZ: "A good introduction page"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

LR 5.5 double-click behavior on WB sliders (and other sliders in Basic tab)

i recently upgraded to LR 5.5 from 5.4.
sometimes i check the auto-WB recommendation by using the ability to Shift + double-click on a WB slider (in Dev. Module). (this feature was introduced in LR 5, i believe, maybe LR 4.)
before the upgrade, whether the WB sliders were already at a custom setting or still on the "as-shot" setting, you could Shift + double-click on either the Temp or Tint slider and get the "auto" recommendation. Then, you could undo and redo, toggling back and forth between the auto setting and whatever you had before that.
now, however, when i Shift + double-click, before the slider registers the double-click and produces the auto setting, it responds to the first part of the double-click. that means that FIRST it moves the slider a little one way or the other, and THEN goes to the auto setting.
this behavior makes it impossible to toggle back and forth between the auto setting and whatever it was before that. instead, it now toggles between auto and that little adjustment that was registered in the first part of the double-click.
for example:
the Temp slider is set to a custom value of 5200 on a certain photo.
i'm curious what is the auto recommendation, so i Shift + double-click on the slider.
the slider registers the first part of my double-click, moving for an instant to 5384, before understanding that i actually double-clicked and producing the auto setting.
this is annoying in any case, but it's a problem because now when i undo and redo to toggle between my custom setting (5200) and the auto recommendation, it's instead toggling between the auto and 5384. (or whatever value happened to register in the first part of the double-click.)
this changed behavior also affects the other sliders in the Basic tab where you can Shift + double-click to check an auto value. personally, i never use this feature on the other sliders, but i do use it quite a bit on the WB sliders as a step in arriving at my custom WB.
also, i just noticed that it also happens sometimes on black-and-white images, when adjusting the Black and White Mix sliders. (these sliders can also revert to their auto value if you adjust one and then Shift + double-click. this is beneficial for when you don't want to return the whole group of sliders to auto mix.
note:
i do not adjust the sliders by dragging. instead, i mouse over a slider, and use up or down arrow keys to adjust in regular increments (or Shift + arrow key for a larger increment). i find this is a much better way to work for a number of reasons, and especially with large numbers of images. if i want to make a finer adjustment, i just click in the value field of a slider and use arrow keys to go in single-unit increments. (or use Option + arrow key for a smaller-than-default increment.)
For color Temp, camera settings already use 50-degree increments (5600, 5650, 5700, etc.), so they appear in LR with those kinds of rounded numbers, never 5611 or whatever. using the arrow keys to adjust color temp also goes in 50-degree increments, and using Shift+arrow key goes in 200-degree increments. For Tint, however, the camera does use single-unit increments, like 7 or 11. the arrow key method of adjusting Tint goes in increments of 5 or 20, which for Tint is usually too broad of an adjustment.
sorry for the long post. anyone else having this problem? as someone who does a lot of toggling back-and-forth to compare things, i find this fairly small change in behavior incredibly disruptive.
my system:
late 2013, 15-inch rMBP; 2.3 GHz i7; 500gb SSD; 16gb RAM
OS 10.9.2 (not yet on 10.9.3 as there seem to be problems)
no Adobe CC items.

bob,
you are correct—what you said does work.
{for the sake of clarity and consistency, when i say double-click on the "slider", i mean on the value-marker, the triangular point that actually moves (or what ssprengel is calling the "slider-thumb/handle" if i'm understanding him correctly)—not the range on which it moves, nor the label to the left side of the range.}
but have i gone crazy?? has the behavior not changed at all?? i could have sworn that in the past, i was double-clicking (with or w/o shift key) on the value-marker of the slider, instead of on the label as you mention (although that instruction does sound familiar now, too). this is not a rare action for me, but something i've done countless times on the WB sliders, and also on the Black and White Mix sliders to return them to their auto value.
actually—now that i think about it, i do this action a ton on the HSL sliders, also: use the arrow keys (or Shift+arrow) to adjust HSL values, which go in increments of 5 (arrow) or 20 (shift+arrow). sometimes to return to zero i use the arrow keys again, but sometimes just double-click on the slider.
Or, if i want to see a very large, imprecise adjustment, i don't use the arrow keys but just click once towards the extemes of the range: +83 or -100 or whatever. and then to return to zero, i just double-click on that same spot—meaning on the slider/value-marker, wherever it happened to land on my first click.
however, in the last couple major releases (LR4 and now LR5), i've noticed that feature doesn't work quite as well as it used to. it used to be very easy to click once, get an extreme value, then very soon afterwards double-click and return to zero. you could do it easily, without even looking carefully at the sliders (so you could look instead at the picture changing). now, however, i find that i usually have to double-click two or three times before the slider responds and goes back to zero. sometimes i have to reposition the mouse very slightly and double-click again for that action to happen (and not because my mouse strayed from the slider).
i have noticed this to be true across many changing conditions:
major releases and smaller updates of LR;
different OS (10.6.8 snow leopard through 10.7, 10.8, and 10.9 mavericks);
different machines: 2007 MBP and late 2013 rMBP;
even different mice: used to have an old Kensington mouse; now using Logitech G500s, a fairly high-end gaming mouse (even though i don't do any gaming).
when i first noticed this less-responsive behavior, i thought it was due to my mouse and/or computer being old, maybe outdated. the kensington mouseworks software didn't really work, even on the older 2007 MBP. so i chalked it up to mouse issues. but it's exactly the same with my new, much more sophisticated mouse, whose software does work on my late 2013 rMBP.
(and now, with LR5.5, there's the issue i mentioned originally, where the first part of the double-click records a value shift before LR realizes i was actually double-clicking.)
why am i bothering to say all this??
first, it's an additional problem, but similar to what i originally posted about. second, it offers (at least some) support for my original idea—that in the past, i was, in fact, double-clicking on the slider itself, not on the label, to get auto or as-shot values.
does anyone else have any thoughts on this? am i the only one who "remembers" double-clicking on the slider, not the label, to get the auto or as-shot WB, or reset HSL sliders, or return to auto values of individual sliders in Black and White Mix?

Ok, so basically my charger fell apart on my MacBook pro(2010) and I didn't have the money for a new charger, I got it in the states too if that's relevant. Basically my laptop will not charge, I bought a new charger yesterday and it's still no-use

Ok, so basically my charger fell apart on my MacBook pro(2010) and I didn't have the money for a new charger, I got it in the states too if that's relevant. Basically my laptop will not charge, I bought a new charger yesterday and it's still no-use,not charging . No green or orange light coming on on the new charger either.

It is one of the items that Apple gets criticized at regular intervals. The MagSafe connector is proprietary and unlicensable, so the company has a lock-in on the power options. And as you have now found out, your hijinks trying to avoid buying an expensive new charger may have caused more damage and led to a total no-charge condition.
If lucky and no physical damage has occurred (there IS a fuse in there somewhere on the circuit boards), maybe resetting the SMC can restore charge functionality, provided there is still enough juice: http://support.apple.com/kb/HT3964

Hi I have a new iPhonei 4S and my ringtones are missing anyone know how to get them back. P. s I don't have a computer

Hi I have a new iPhonei 4S and my ringtones are missing anyone know how to get them back. P. s I don't have a computer

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

With the new actualization of my ipod, app store wont let me download apps like kik, tumblr and more, i really need kik cause theres were i text my friends, what is happening?

With the new actualization of my ipod, app store wont let me download apps like kik, tumblr and more, i really need kik cause theres were i text my friends, what is happening?

What does "new actualization" mean?
Do you have Restrictions set that world prevent installing those apps? Settings>General>Restrictions

My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

Question: I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

It's a common issue. The Basic panel is merely hidden.
Hiding/unhiding panels is actually a feature of Lightroom but it is unintuitive - few people know it exists - so most newcomers are thrown when a panel somehow gets hidden.
Right-click anywhere in the right hand side panel area and a context menu will appear.
Click the Basic option to make the Basic panel re-appear.

E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN

Missing new Basic sliders and more...

Similar Messages

Maybe you are looking for