Missing Notes

I went to enter information in a Note on my iPhone and the note is gone = On the iPhone I have all my accounts activated and there are 26 Notes in All Notes area. BUT when I go to my Mac and check there are only 8 notes on the iCloud/All notes area of Mail. It's not a Q of restoring them = this has happened before [a few months ago] and I did that = what I want is to fix the problem.
I have synced my iPhone to my Mac and they're not their still.

It happened to me and after several moments of panic I found them in my mail trash. Copied and restored. Don't empty you email trash until you check it out.

Similar Messages

Error message "The Printhead appears to be missing, not detected, or incorrectly installed"

HP Officejet Pro 8600 e-All-in-One Printer - N911a
I've had this printer for awhile and it has worked perfectly.
Just out of nowhere...
I'm getting an error message that says "The Printhead appears to be missing, not detected, or incorrectly installed" . A short animation plays but i can't figure out what it's tell me to do.
Please help!

Hi @AjoyBrooks,
Welcome to the HP Forums!
I see that you are getting the Error message, "The Printhead appears to be missing, not detected, or incorrectly installed." On your HP Officejet 8600. I am sorry that this has occured, but I am happy to help!
Please take a look through this printhead guide. A 'Missing or Failed Printhead' Error Message Displays on the Printer after Installing a New Printhe....
Hope this guide helps, and please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Component is missing, not registered, not upgradeable

Hi,
I got the error:
"Error: 0xC0048021 at Data Flow Task, OLE DB Source [1]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "OLE DB Source;Microsoft Corporation; Microsoft SqlServer
v10; (C) Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;7"."
This apears in any destination or source connection

Hi Douglas,
Based on the current information, the issue occurs because there are only 32-bit relevant OLEDB drivers installed on the current computer, so you need to configure the SSIS project to run in 32-bit runtime mode. Regarding the issue that you don’t need
to change this property on the other servers, there can be two reasons:
The existing SSIS project on another server is already configured to run in 32-bit mode.
There are 64-bit relevant OLEDB Drivers installed on other servers, hence, the package can run in 64-bit runtime mode properly.
Regards,
Mike Yin
TechNet Community Support

How to recover missing notes on an iphone

How can I recover missing note on an iphone. I lost them when I deleted an old buisness email account that is no longer operational.

Have you been backing up the phone? You might be able to recover the note if you restore to a backup that was made while the note was on the phone. It might not work though, if the note was resident on the business account and was being synced to the phone that way.

How to recover missing notes on iPad

How do I recover missing notes on the iPad?

If you backup on a regular basis and the notes that you want to recover are in the backup, you can restore from a backup to retrieve the notes. Everything in that backup will be restored to the iPad if you choose to do this.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

Printhead appears to be missing, not detected or incorrectly installed

hp officejet 6699 won't print - gives message "printhead appears to be missing, not detected or incorrectly installed." I have unplugged as instructed and that did not work. I replaced all of the cartridges and that did not work. It's over a year out of warranty and I don't know where to take it. I didn't want to have to buy a new one just yet. Is approx 2 years the life of an all-in-one now?? Can anyone tell me what to try? Thanks!

Hi pip3, Can you remember what you were doing when the error occured? Was there a specific event that triggered the message? Did you unplug the printer while it was switched on to reset it (documented here)? Please let me know if you resolve your issue, otherwise I will try to help you troubleshoot further. Many Thanks,Francheska

The TOOLS menu & HELP menu are missing (not the whole bar)

the TOOLS menu & HELP menu are missing (not the whole tool bar, but only these two menus), I can see File, Edit, View, History, Bookmarks but not Tools and Help (on Firefox 3.6 on windows XP)

I suspect that you installed an extension that hides some menu items thru user settable preferences.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Music notation inaccurate and/or missing notes

I connected my Yamaha keyboard to my iMac via MIDI cables and was able to record a track in GarageBand by playing directly on my Yamaha keyboard. However, when I play back the recording and open the music notation view, the notes shown on the staff are either wrongly notated and/or missing. For example, a quarter note followed by 2 eighth notes are shown as a triplet! I was definitely NOT playing it as a triplet and it doesn't sound like a triple on playback, yet it is displayed as a triplet. Also, when I arpeggiate a chord which is held for a quarter note length, it is displayed as a quarter note block chord with MISSING notes, but yet you can HEAR ALL the correct notes in the arpeggiation during playback. What can I do to make GarageBand notate more accurately and display every note it is playing, that is, if you can HEAR the note being played, it must SHOW it on the staff. Please help!

timzter wrote:
I haven't used or seen Logic Express before. Is the recording/notation better/more accurate in Logic Express?
Yes, of course. Logic Express 8 has the same notation features as Logic Pro 8 which is used by professional composers. You can download the pdf manuals from Apple's website.

Error message:printhead appears to be missing, not detected, incorrectly installed or incompatible

new error message: "printhead appears to be missing, not detected, incorrectly installed or incompatible". I already tried restarting several times and have uninstalled and reinstalled all of the ink cartridges. Still receive same error mesage.

Hey walter,
I would advise performing the steps in the document linked below that addresses the printhead failure message you are receiving in this printer model. Let me know how these steps go.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02899429&tmp_task=solveCategory&cc=us&dlc=en&lc...
I hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

I miss not having the same fonts as cs3 ie Bradshaw, Lucinda and papyrus. How can I access these.

I miss not having the same fonts as cs3 ie Bradshaw Handwriting, Lucinda and Papyrus. How can I access these on cs5? I have not found the fonts for this program to my liking.

I can't find any reference to a handwriting font named Bradshaw anywhere. Are you sure you have the name right? ITC Bradley Hand Regular, along with Papyrus and the Lucida (no "n") family are all included with recent versions of Windows, though, and should be in your font list in CS5 if you are, in fact, running Windows.
Is this the same machine that has CS3 installed? Did you remove CS3? Do the fonts show up in any other programs? Indesign can see fonts that are installed in the system fonts, the Common Files > Adobe > Fonts folder, and the private fonts folder for InDesign in the application folder. If the fonts show in CS3, but not elsewhere, they are probably in the CS3 InDesign Fonts folder.

Address Book is missing Notes probably due to syncing

I'm having trouble with notes that I have entered in the Note section of Address Book. Some of my Notes are disappearing entirely for seemingly random contacts. Out of about 2000 contacts the notes for about ten or twenty random contacts disappear forever. This has been happening to me for years using Address Book although I frequently update. I'm guessing that its related to problems synching my Address Book with my iPhone, MobileMe, and iPad. I backup using MobileMe and Time Machine. Any suggestions on how to prevent this persistent problem? Also, is there an easy way to restore just those missing notes from Time Machine without replacing my entire Address Book with an old copy that will almost certainly be inferior because it is not up to date. I can't take the time to go through all 2000 contacts to figure out which ones have missing notes.

Hopefully your computer included the correct install-restore discs and if the
OS was an upgraded version from the original, those discs are there, too.
You can use a demo mode of Pacifist (download from CharlesSoft) and
have it extricate the specific parts of the correct OS X Installer and then
it can install just the missing item(s) from the desktop. This is a bit tricky.
(Should be better than performing an Archive & Install to just get one part.
And the A&I process doesn't require wiping the hard drive, just upgrading.)
Sometimes the instructions with Pacifist appear to be counter-intuitive;
so if the utility does not work, be sure to recall details of what you did
and try the other possible path. Be sure to repair disk permissions on
the system once you are done; that shouldn't hurt but may help.
If you had a bootable full computer clone on an external hard disk drive,
you could probably just get the Address Book from there. However,
some of the main system parts need to be Installed correctly since a
few other parts get put into places where they aren't really seen.
Good luck & happy computing!

PDF Export Issue - content missing (Not background freeze issue)

Hi,
Currently having some issues with exporting PDF's from Indesign CS5. When I export the first page (which is based off a master page) the majority of the content gets cut off - so this is images, coloured boxes and strokes and a barcode.(Top Image)
When I cut the content from the master page and paste it onto a standard page, then it prints off ok (Bottom Image), but we can't realistically do this every single time. Its not only in one document that its happened - it has occured with several of our documents and across multiple computers.
I have checked the forum and troubleshooting, have gone through and done the troubleshooting based on document and application level to no help. http://kb2.adobe.com/cps/499/cpsid_49998.html#main_DocumentLevel
I've read the different posts regarding background tasks which is not the issue as it is actually exporting it and its fine.
Have restarted the machine, double checked updates, checked whether its a damaged document (its not from what I can tell)
Tried exporting without images (Omit OPI) with same results.
Have checked out the transpency issue (as does contain some transparency but no results).
So thinking it must be something to do with the master pages but I have no idea what.
We were using an external plug in for the barcodes for CS4, that does not work for CS5 so I removed the barcode to see if that was affecting it but again no luck.
Just to confirm we're running
Adobe CS5 onto our computers - we've run all the the updates both for Adobe Acrobat Pro (9.4) and for all of the CS5.
Its being run on iMac 2.4 GHz Intel Core 2 Duo, OS X 10.6.4
Adobe CS4 has been uninstalled and deregistered so no interference there.
Can anyone help me out here or recommend something?
Thanks in advance.

I've redrawn it all and placed in new images and now its starting to do weird stuff like make the images disappear as well as making part of the transparency 20% (as set by me) but then making another section of it 100%.(See below - top one is correct, bottom is incorrect). I would agree with you that it may just be an issue with the file, except its happening across multiple computers. There's not really any chance its a dud version of CS5 is there? Its all legit so no real reason why it wouldn't be.
Override Master Pages fixes it, but this is pretty disappointing if I need to have to do this every single time as it makes the master pages on half useful.
We do have CS3 actually and I opened it in that, exported it as a .inx but same issue with elements missing - the stroke around the outside disappeared.
Could it be anything to do with bringing across elements from Illustrator? Although the top element is appearing fine, and the bottom transparent element is a copied item so shouldn't be an issue. And the image disappearing - there's no real reason for that.

Pictures in iBook are partial/missing not displaying correctly

I downloaded new iBook called "Foundation" and the pictures are incomplete/partial/missing. Tried deleting the book and re-downloading and still same problem. Some pictures are complete, some partial and some just have a question mark inside a blue box (where the picture is supposed to be i am guessing). There are also pages that have a large pink box that says ... "This page contains the following errors: error on line 1 at column 1: Ending error. Below is a rendering of the page up to the first error." I could live without the pictures but this is an exercise book and the pictures are very important! Any help is appreciated.

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated!
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

339 - Component 'Srcvw3.dll' missing / not configured correctly

Hi,
I'm trying to connect to essbase through FDM. I met this error in Tool > View error: "339 - Component 'Srcvw3.dll' or one of its dependencies not correctly registered: a file is missing or invalid."
I moved ES11X-G4-H.xml to FDM Shared component and upsES11XG4H.exe to Essbase-client-32/bin folder. I also configure ARBORPATH and ESSBASEPATH to essbase 32 bit client directory.
Please help

The file you are referencing should be located in the Oracle\Middleware\Bin directory. Do you see this file here? If so, you can register it using regsrv32. The file and it's corresponding .lic file should be in this directory and registered from this directory.
If you still receive the error, copy these two files to the FinancialDataQuality\sharedcomponents directory and register them using regsrv32 from this location.

Picklist icon missing/not available

Hi,
I have a customer on 2007A PL38 where one user does not have the picklist icon available/appear in the AR Invoice. For Item invoices, it doesn't appear in the Item Code field; for Service invoices, it's missing from the GL Account field. Same applies to the Tax Code field.
We've been able to determine it relates to a specific user. But it's sporadic that this happens - one day it will be okay, the next it may not.
In the meantime when it is missing, I have them use the "*" to get the selection list.
Any suggestions would be appreciated.
Thank you,
Heather

Heather,
I believe the current patch level is 41. Perhaps upgrading might take care of this since you say it is sporadic.
Suda

Missing Notes

Similar Messages

Maybe you are looking for