Missing O2C and AABC composites after deployment

After deploying the O2C and AABC composites in AIA following the steps provided in the Oracle® Application Integration Architecture Installation and Upgrade Guide for Pre-Built Integrations Release 11.1 (Part Number E23118-03), we notced that some composites were not deployed. The installation and upgrade guide provided a list of composites that should have been deployed but upon verification, the following composites were missing:
Missing O2C Composites:
CommunicationsFulfillmentOrderEBSV1
CommunicationsInstalledProductEBSV2
CommunicationsItemCompositionEBSV1
CommunicationsItemCompositionResponseEBSV1
CommunicationsPriceListEBSV2
CommunicationsPriceListResponseEBSV2
CommunicationsProvisioningOrderEBSV1
CommunicationsSalesOrderEBSV2
CommunicationsSpecificationValueSetEBSV1
CommunicationsTroubleTicketEBSV1
CommunicationsTroubleTicketResponseEBSV1
QueryClassificationListSiebelCommsProvABCSImpl
QueryCustomerPartyListSiebelProvABCSImplV2
QueryProductClassAndAttributesSCECommsReqABCSImpl
QuerySpecificationListSiebelCommsProvABCSImpl
QuerySpecificationValueSetListSiebelCommsProvABCSImpl
SyncAccountSiebelAggregatorAdapter
SyncAccountSiebelReqABCSImpl
SyncAcctSiebelAggrEventConsumer
SyncAddressSiebelAggregatorAdapter
SyncBPSiebelAggregatorAdapter
SyncContactSiebelAggregatorAdapter
SyncCustomerPartyListBRM_01CommsJMSConsumer
SyncCustomerPartyListBRMCommsJMSProducer
SyncCustomerPartyListBRMCommsProvABCSImpl
SyncCustomerSiebelEventAggregator
SyncDiscountBRMCommsReqABCSImpl
SyncDiscountInfoChangeBRMAQ
SyncItemCompositionListSiebelCommsProvABCSImpl
SyncProductBRMCommsReqABCSImpl
SyncProductInfoChangeBRMAQ
TransformAppContextSiebelService
UpdateSalesOrderOSMCFSCommsJMSConsumer
UpdateSalesOrderSiebelCommsProvABCSImpl
UpdateTroubleTicketOSMCFSCommsJMSConsumer
UpdateTroubleTicketSiebelCommsProvABCSImpl
Missing AABC Composites:
CommunicationsAccountBalanceAdjustmentEBSV2
CommunicationsAccountBalanceAdjustmentResponseEBSV2
CommunicationsCreditAlertEBSV1
CommunicationsInstalledProductEBSV2
CommunicationsInvoiceEBSV2
CommunicationsReceivedPaymentEBSV1
CommunicationsReceivedPaymentResponseEBSV1
CommunicationsServiceUsageEBSV2
QueryBalanceSummarySiebelCommsReqABCSImpl
QueryCustomerPartyListBRMCommsProvABCSImpl
QueryInstalledProductListBRMCommsProvABCSImpl
QueryInvoiceBalanceDetailsSiebelCommsReqABCSImpl
QueryInvoiceEventDetailsSiebelCommsReqABCSImpl
QueryInvoiceListBRMCommsProvABCSImpl
QueryInvoiceListSiebelCommsReqABCSImpl
QueryInvoicePaymentSiebelCommsReqABCSImpl
QueryInvoiceSiebelCommsReqABCSImpl
QueryPaymentSiebelCommsReqABCSImpl
QueryReceivedPaymentListBRMCommsProvABCSImpl
QueryServiceUsageBRMCommsProvABCSImpl
QueryUnbilledBalanceDetailsSiebelCommsReqABCSImpl
QueryUnbilledEventDetailsSiebelCommsReqABCSImpl
QueryUnbilledUsageSiebelCommsReqABCSImpl
SearchInvoiceEventDetailsSiebelCommsReqABCSImpl
SearchPaymentSiebelCommsReqABCSImpl
SearchUnbilledEventDetailsSiebelCommsReqABCSImpl
SyncAccountSiebelAggregatorAdapter
SyncAccountSiebelReqABCSImpl
SyncAcctSiebelAggrEventConsumer
SyncAddressSiebelAggregatorAdapter
SyncBPSiebelAggregatorAdapter
SyncContactSiebelAggregatorAdapter
SyncCustomerPartyListBRM_01CommsJMSConsumer
SyncCustomerPartyListBRMCommsJMSProducer
SyncCustomerPartyListBRMCommsProvABCSImpl
SyncCustomerSiebelEventAggregator
TransformAppContextSiebelService
UnbilledUsageSiebelCommsReqABCS
UpdateAccountBalanceAdjustmentRespSiebelCommsProvABCSImpl
UpdateCreditAlertBRMCommsProvABCSImpl
UpdateCreditAlertSiebelCommsReqABCSImpl
The deployment finished successfully and the log files did not show any error.
Kindly provide your feedback about this issue. Any input would be greatly appreciated.
Thanks in advance!

Hi,
For this issue, first please make sure that the language pack is added and you've set an correct locale settings for UI language.
Here're two reference links:
http://blogs.technet.com/b/askpfeplat/archive/2013/09/16/getting-started-with-windows-deployment-for-windows-server-2012-or-windows-8-using-microsoft-deployment-toolkit-mdt.aspx
http://blogs.technet.com/b/deploymentguys/archive/2010/01/20/configuring-regional-and-language-settings-online-in-an-mdt-task-sequence.aspx?PageIndex=2
Yolanda Zhu
TechNet Community Support

Similar Messages

Missing ejb relation description file after deploying ejb module

when i deploye a ejb module to oc4j_extended_1013_dp4 successfully, it's can't find the file ejb-jar.xml that descript ejb relations and navigators.
why?
how can i defense it ?

however, i repeat my question
i use two file descript ejb module in MEAT-INF directory, one name ejb-jar.xml , another name orion-ejb-jar.xml
my ejb jar-package contrained them.
after deploying , i only find orion-ejb-jar.xml in application-deployments/myapp/myejb

Missing ttyUSB0 and cant hibernate after system update

Hi! I'm using usb modem huawai. Before my yesterday's update everything was fine, but after it ttyUSB0 had gone missing. E.g. it (ttyUSB0) doesn't appear when i plug in my usb modem any more. Also gnome's hibernate utility doesn't work anymore. When I stop working and press System -> Shut Down -> Hibernate it looks like it suspends to my swap disk, but it doesn't resume when i start over it works like if i rebooted.
I suppose these two issues r connected and their cause is system update. Any ideas?

usbserial is loaded. lsusb shows:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 002 Device 002: ID 064e:c107 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
and i made
>pacman - Suu

Missing Renderer and CC crash after CUDA update

Hey guys,
Lets see if we can get some help here.
My current setup:
MacBook Pro Retina 15-inch, Early 2013
2.8 GHz Intel Core i7
Memory: 16gb 1600MHz DDR3
Graphics: NVIDIA GeForce GT 650M 1024MB
Operation System: OS X 10.8.5
I am running a 27inch thunderbolt cinema monitor and a 40 inch LED TV client monitor.
Following a recent NVIDIA Cuda update, I open a project in PR or AE to find a dialog box that reads:
Missing Renderer
"This project was last used with Mercury Playback Engine GPU Acceleration(CUDA), which is either not available or not certified on this system. Mercury Playback Engine GPU Acceleration(Open CL) will be used."
I click "OK" and go into PR or AE. Doesn't matter what project I go into, when I start working and there are several dosen clips in a timeline pulling form the source footage on a thunderbolt drive, the scrubing with extremely sluggish to the point where my workflow speed overwhelms the system and another dialog box pops up to say:
"Premiere had experieced a serious error and is forced to close....."
Serious error indeed!!!
Never had this issue prior to the CUDA update.
Spent 2 hours in the apple store erasing the CUDA update and installing the previous one......to no avail.
Wiped the commputer completely and reinstalled everything on it(Creative Cloud, REDCine X, Red Giant Looks, etc).....also to no avail.
Thoughts?
-Stefan
redvaultproductions.com

Thanks for the response Jim.
Ideally yes, internal drives would be awesome to have, but without the MacPro out yet, this is the next best option.
This doens't solve my issue tho......why have I been able to work seemlessly with throughout the Creative Cloud with Premiere, After Effects, Photoshop, as well as run REDCine X and Red Giant Looks prior to the update. After the update, something is amiss.
Now there is a Missing Renderer dialog box as I open Premiere. Something has to have affected PR.
-Stefan

Missing movies and tv programs after update to iO5 and iTunes 10.5

So I backed-up my films and TV programs from my iPad to my Sony Vaio laptop after updating to iTunes 10.5 and iO5. But now I can't find them. I can find all my purchased music and apps fine. What's happened?

Since the update my white iMac 24 is having an odd situation with the sound. Example: I send an email and the sent sound is proceeded by a very audible click just before the sent sound is played. I am using the built in sound. It is as if the sound is turned off, until needed, it turns on with a click, plays, and later it does it again when I send an email later, as if it turned off, again. Very odd. Alan in Boise

Missing menubar and all toolbars after trying all suggestions (Alt/F10/F11/F/firefox reinstall/safe mode restart etc........ Hello does anybody actually working at Mozilla have a correct fix? Seems many people have the same issues.

- Now only FF banner appears at top with tabbing ok.
- Search windows gone too.
- Some sites unable to open documents for Adobe even after uninstall and reinstall.
- Have uninstalled/reinstalled FF
- FF started in safe mode seems OK but then regular Start same problem
- I this a Java corruption?

This can be a problem with the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf

Radios not working: Missing MEID and Baseband version after battery swap

Upon booting up after swapping batteries last week, I noticed that I wasn't getting any service (voice, 3G, 4G, etc.). I have seen this issue in the past, but it always fixes itself after a reboot. Not this time however.
I have rebooted, battery pulled, and even factory reset with no luck. Radios are still not working. I noticed in the settings> about phone> baseband version says unknown, and when dialing *#06#, the MEID is blank.
Phone is running stock 4.1.1, not rooted. Any ideas? Is it possible my radios were corrupted randomly, or maybe a hardware failure? If it's a software issue, how do I go about fixing it? Please help!

Unfortunately, this sounds like a case of the bad hardware blues, jsw5050.
In that case, if there is still warranty on the phone, I recommend getting a replacement.
We need to make sure there is no physical or liquid damage (including corrosion in or around the charging port) in order for it to be replaced under warranty.
Tamara H.
Follow us on Twitter @VZWSupport

Missing Camera and Lens Metadata after iPhoto Import

I've noticed that the Photos for Mac app seems to have "lost" all of the Camera and Lens Metadata associated with each of my photos. Has this happened to anyone else?
No matter which photo I choose, the Info inspector window shows "No Camera Information" and "No Lens Information". I've confirmed that the Camera and Lens metadata is still present in the original iPhoto Library.
If I create a new iPhoto Library with just a dozen or so pictures and then choose that Library when launching Photos for Mac, by pressing the Option key while clicking the Icon, the photos are imported with the Metadata intact. Clearly something went wrong with the import of my much larger main iPhoto library. (The main library has over 100,000 photos in it.)
I'm wondering if there is some way to force Photos for Mac to re-index the Metadata. Any thoughts?
Thanks,
Michael

I have the same problem.. no lens metadata
will rebuild library with alt-cmd-start-Photos help?
first pic imported in photoshop from Photos app
second pic from iPhoto

Missing method and period category after transportation

I did a flexible upload, one method for the flexible upload and one task.
I the task I defined period category = "mensual" and method = "EEFF"
When I transported it, when I check in PRD in the task I have Period Catergory ="anual" and with out a method.
I create a new flexible upload, method and task and I transorted again. And it still wrong.
¿What can I do?

Hi Laura,
I had faced the same issue while transport.
In the second time while transporting the same task , I have attached the method to task one period before also in UCWB and I period later also in UCWB.
For example if I need to transport the task effective from 001/2008, I attached the method to task with opening in UCWB parameters 012/2007,001/2008,002/2008.
It worked for me. Hope this inputs helps.
Best regards,

My elitepad 900 tablet shows missing serial and modle # after bios uptae

My tablet started to show the missing serial and product number after i have upgraded the bios to the latest version. now my windows 8.1 is asking to reactivate windows.
i have not changed the board or any other hardware update. what i did is only drivers and bios updates after i upgraded dro windows 8 pro to to windows windows 8.1 pro.
please help to get it resolved.
thanks
Raees

Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

How do you use a SOA Composite after you have deployed it and tested it?

I have created a SOA Composite application, deployed it with no problems, and tested and it works. However I am having trouble finding info on what to do next. I really would like to know how to use this SOA Composite application in a web application. I am trying to create an interface that would use the SOA composite. Any links to help would be greatly appreciated.
This is the only help I have found so far, http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e15524/uc_bpel_bc.htm

Hi,
It's a web service call, you go to EM get the WSDL and with it you generate the webservice client for your web application... By calling the web service you will be starting the composite...
Cheers,
Vlad

Ejb-ref-mapping in orion-ejb.jar missing location attribute after deployment

I have noticed that on several of my entity beans that after deployment the <ebj-ref-mapping location="JNDIName" name="LocalName"/> is missing the location attribute. This causes any attempts to lookup the EJBHome for that EJB to fail because the path to the EJBHome in JNDI cannot be found (obviously!). The problem is that this causes me to manually edit the application-deployment/<app>/<ejb.jar>/orion-ejb.zml after each deployment via the admin.jar. This seems like a bug with OC4J and I am wondering if Oracle is aware/doing something to fix this?
I have noticed that the same problem exists for session beans, however, for some strange reason the EJBHomes can still be resolved in JNDI. In all cases the location in JNDI is different then the <ejb-ref-name> I used in the client EJB.
Example being I have an entity bean at com.foo.Foo and the session bean uses lookup("java:comp/env/ejb/Foo") it is still able to find the EJB even though the orion-ejb.xml looses the location attribute. If the case is an entity bean referencing another entity bean in the same fashion I get an error because the location attribute is missing.

If the 'location' value is same as the 'name' value, then even though the location attribute is missing, it is ok and should work. If they are not the same, then you should have defined the ejb-link element in your ejb-jar.xml when defining this ejb-ref and that would make the location attribute appear in the generated orion-ejb-jar.xml.
If the referenced bean is from a different application (EAR), then you should have used the -parent option when deploying the application.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Kris Trujillo ([email protected]):
I have noticed that on several of my entity beans that after deployment the <ebj-ref-mapping location="JNDIName" name="LocalName"/> is missing the location attribute. This causes any attempts to lookup the EJBHome for that EJB to fail because the path to the EJBHome in JNDI cannot be found (obviously!). The problem is that this causes me to manually edit the application-deployment/<app>/<ejb.jar>/orion-ejb.zml after each deployment via the admin.jar. This seems like a bug with OC4J and I am wondering if Oracle is aware/doing something to fix this?
I have noticed that the same problem exists for session beans, however, for some strange reason the EJBHomes can still be resolved in JNDI. In all cases the location in JNDI is different then the <ejb-ref-name> I used in the client EJB.
Example being I have an entity bean at com.foo.Foo and the session bean uses lookup("java:comp/env/ejb/Foo") it is still able to find the EJB even though the orion-ejb.xml looses the location attribute. If the case is an entity bean referencing another entity bean in the same fashion I get an error because the location attribute is missing.<HR></BLOCKQUOTE>
null

Unable to start em after deploying SOA composites

Hi
I have installed SOA 11.1.1.1.3 and cretaed the repositories. I have created a new domain soa_domain which supports SOA,Enterprise Manager,BAM.
The first time I started the server, it started successfully and I was able to deploy two SOA composites and also test them successfully through the em console.
Today I restarted my admin server and I find the following logs during startup:
####<Jan 6, 2011 10:07:47 AM GMT+05:30> <Warning> <J2EE> <INMUCHPC00278> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1294288667512> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
####<Jan 6, 2011 10:07:58 AM GMT+05:30> <Warning> <HTTP> <INMUCHPC00278> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1294288678205> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoSuchMethodError: org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar([Lorg/apache/xerces/xni/parser/XMLInputSource;)V.
####<Jan 6, 2011 10:07:58 AM GMT+05:30> <Error> <Deployer> <INMUCHPC00278> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1294288678441> <BEA-149231> <*Unable to set the activation state to true for the application 'em'.*
weblogic.application.ModuleException:      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
*Caused By: java.lang.NoSuchMethodError: org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar([Lorg/apache/xerces/xni/parser/XMLInputSource;)V*
     at org.apache.xerces.jaxp.validation.XMLSchemaFactory.newSchema(Unknown Source)
     at javax.xml.validation.SchemaFactory.newSchema(SchemaFactory.java:594)
     at com.sun.faces.config.DbfFactory.initSchema(DbfFactory.java:151)
     at com.sun.faces.config.DbfFactory.<clinit>(DbfFactory.java:120)
     at com.sun.faces.config.ConfigManager$ParseTask.<init>(ConfigManager.java:372)
     at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:280)
     at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:202)
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And when I check the Admin console,Deployments section, the em application status is shown as failed. I tried starting it up from the Admin Console as well.
But no luck....
Has some one come across this before? Could you please help me figuring out the cause of this problem and how to overcome this?
Regards
Kshama

When I mentioned I have deployed DBAdapter and JMSAdapter, I meant that, I added new outbound connection pools to the configuration and redeployed the adapters.
Also, I compared the Admin Server logs( before and after redeploying Adapters), I found that there was a difference in java classpath it was referring to.
After deployment of adapters, when I restarted the server, the classpath was referring to my classpath environment variable also which had an entry pointing to ant-1.6/xercesImpl.jar.
I removed the entry from environment variable classpath.
I have now reverted back the deployment order as before and everything seems to be working fine.
Thanks All for your instant replies.
Regards
Kshama
Edited by: Kshama Tamhankar on Jan 6, 2011 9:36 PM

Report Generation broken after deployment - Excel Set Cell Color and Border.vi

Upon deployment, the Excel Set Cell Color and Border.vi became broken. After installing LV2010 SP1 to view the VIs in the deployment, I noticed that in the second case structure where the code draws the border using the BorderAround invoke node, there is an extra variant input parameter named 'Parameters'. Upon right-clicking, an option to 'Relink Invoke Node' appeared and after selecting this, the extra input disappeared and the VI was no longer broken.
Why does "Relink Invoke Node" appear? How do I create a deployment with this issue? Has anybody else experienced this? Why is the TestStand deployment so buggy?

Hi Ching-Hwa,
I have set up a test deployment here where I am deploying a workspace that contains a sequence file. This sequence file has a LabVIEW Action Step calling a VI that opens a new Excel file and simply calls the Excel Set Cell Color and Border VI. After deploying this, both the VI and my test sequence ran on the deployment machine without error. Therefore, I do have some more questions to more accurately reproduce what you are seeing.
First, what operating systems are you developing on and deploying to? Also, what license do you have for TestStand on the machine you are deploying to? If you have a development version, can you manually take the sequence file and VI to this machine and run it? I know you now have LabVIEW 2010 SP1 on your development machine, but if you have the development version of TestStand as well, it would be interesting to see if you copy the files over if you still see this behavior. Are you including the TestStand Engine in the deployment?
Can you open a blank VI on the deployment machine and add the Excel Set Cell Color and Border VI? It would also be interesting to see if this is not a product of the deployment, but rather an issue with something on the deployment machine itself. What version of the Report Generation Toolkit do you have on each machine? Also, what versions of Excel are you using on the development and deployment machine? Again, it would be helpful for me to know exactly what versions you have installed on both the development and deployment machines so that I can reproduce this as accurately as possible.
One last thing to try, too, would be to try deploying the VI by itself just to see if it also has the same behavior. Do you have the Application Builder in LabVIEW? If so, could you also try building an executable from the VI, create an installer, and deploy this to the deployment machine?
In regards to the "freezing" of code by removing the block diagrams, I do not believe this will be a proper work around in this case. While this removes the block diagram from actually being deployed along with the VI and restricts users from editing the code on the deployment machine, if something is getting changed in the compiled code upon deployment, this will not stop this from happening. This option is available more as a memory option to lower the size of the deployment as well as prohibit any users on the development machine from editing the block diagram themselves.
Thanks, Ching-Hwa! I look forward to your response so that I can continue trying to reproduce this issue. Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

Missing O2C and AABC composites after deployment

Similar Messages

Maybe you are looking for