Missing old postings in FAGLB03 ( new GL )

Hi all gurus of SAP.
We are having a problem in test environment. We have gone from 4.6C to ECC6.0, and new GL is activated.
Everything is OK, but in FAGLB03, postings made in the previous classic ledger are not showed.
we have set in system ledger 0L .
I have attached two screenshots with classic GL view and new GL view in order to compare.
It´s the first time that we have done this, so it´s possible we have forgotten anything.
I hope you can help us.
Thanks in advance.

Hi all,
thanks to your help and surfing in the internet, I have got the solution:
In the standard system, reading data from the tables of classic General Ledger Accounting is deactivated. This means that the programs of classic General Ledger Accounting (such as classic financial statement) read the balances from the tables of new General Ledger Accounting. If you want the programs of classic General Ledger Accounting to read the tables of classic General Ledger Accounting, select the indicator Read Classic General Ledger (GLT0). ( table faglactivec) You should only select this indicator if the indicator Write Classic General Ledger (GLT0) is also selected.
But select "read"  indicator can lead some problems, it´s not recommended by SAP. Note 1158830.
So SAP solve this problem with note 1155999 and 1168430.

Similar Messages

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • I had to change to a new Apple MacBook Pro.  I deauthorized my old computer, authorized the new one and less than a quarter of my media shows up in the new computer.  Everything that was downloaded from a cd is missing.  Any help?

    I had to change to a new Apple MacBook Pro.  I deauthorized my old computer, authorized the new one and the only media that shows up are items with a cloud.  Everything that was downloaded from a cd, including personal movie files, are missing.  It's as if my former library is gone.  How can I find it again? Or is this just Apples way of screwing with me?

    No. Firewire and Ethernet are not the same. Ethernet would be used to connect the computers to your network. A Firewire cable is used to connect the computers directly. They are different ports.
    The above shows what an Ethernet port and a Firewire 400 port look like.
    These are the plugs used for FW800 on the left and FW400 on the right.

  • Forums: read/unread-new/old postings icon not displaying

    Just noticed this recently (perhaps after the 10.4.3 upgrade?): in all the forums I subscribe to online, the icons used by different boards to display read/unread or new/old postings no longer display the status of postings. Just wondering if anyone else has experienced this.
    Thanks in advance. BTW, this doesn't appear to be a problem on the Apple Discussion boards.

    OK, I see the problem; basically one simply needs to log in again. Even though I have "log in automatically" checked for each forum, after upgrading it appears that users need to indeed log in once again.

  • I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

    I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

    Hi,
    Which operating system are you running on?
    The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
    The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
    Brian

  • IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

    My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11!  Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software.  I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up.  Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work.  I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either.  However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally! 
    So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
    I tested it out, and sure enough, it worked!  I then tried importing an entire folder (which, was actually the name of the event), and again it worked!  So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library!  AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap: 
              1. Open your new iPhoto Library
              2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon 
              3. Click on "Show Package Contents"
              4. Go to the folder called "Originals" or "Master"
              5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
              6. DO NOT try Importing from inside iPhoto!  For some reaseon, iPhoto can't see these images, but I promise, they're there! 
    I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
    Hope this helps other people out, GOOD LUCK! 

    I'm re-posting the answer to this problem so I can show it has been answered: 
    Open your new iPhoto Library 
    Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
    Click on "Show Package Contents"
    Go to the folder called "Originals" or "Master"
    Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
    DO NOT try Importing from inside iPhoto!  For some reason, iPhoto can't see these images, but I promise, they're there!
              GOOD LUCK!!!

  • Moving a catalog from old computer to the new one.

    The old computer (32 bit) has PSE 9 and the new one (64 bit) PSE 11. The Folders holding the photos will be on a data drive having the same letter as the old computer (both have separate dirves for data). So the adresses of the phots will be the same.
    How do I move the catalog, which I think is on the "C" drive in the old computer, to the new computer and convert it to PSE format. Could I move a backup of the catalog to the new computer and then restore it to PSE 11? One problem is that I am not sure which one of the several "catalogs" on the old "C" drive is the right one. [None of those are backups since I always stored the backups on another drive]. How do I tell?
    Any help will be appreciated.

    mgraleigh wrote:
    The old computer (32 bit) has PSE 9 and the new one (64 bit) PSE 11.
    Good. PSE11 is a 32 bits application and will be installed as such in the new computer.
    The Folders holding the photos will be on a data drive having the same letter as the old computer (both have separate dirves for data). So the adresses of the phots will be the same.
    If the data drives on both computers are internal (not a unique external drive alternatively plugged in) you are wrong. The drives are recognized not only by letter drive but also by serial number.
    How do I move the catalog, which I think is on the "C" drive in the old computer, to the new computer and convert it to PSE format. Could I move a backup of the catalog to the new computer and then restore it to PSE 11? One problem is that I am not sure which one of the several "catalogs" on the old "C" drive is the right one. [None of those are backups since I always stored the backups on another drive]. How do I tell?
    Since you have the backups on another drive (I suppose they were made from the Organizer, not from another external software), you should simply do a restore to 'custom location' in the new computer. In a first step, that will restore the pictures folder tree, in a second one it will convert the catalog.
    If you want to move the catalog, it will be harder:
    - locate the folder with your catalog. Each catalog is in its own folder named from the catalog title. You should copy the whole folder with its files and subfolders to the new catalog, preferably in a different folder tree than your pictures folder tree.
    - In the Organizer, you should convert it from the catalog manager
    Now, how to resolve the problem of the data drive different serial numbers ? Three different ways :
    1 - Use the 'reconnect missing files' feature. Its now easier with PSE11
    2 - In Windows, reassign the same serial number to the drive. Some reading from John R Ellis :
    ( http://www.johnrellis.com/psedbtool/#_Detecting_Problems_with )
    3 - use a sqlite database tool to manually change the serial number in the media_table of the new catalog.
    You can see why using the backup / restore process is much simpler and safer.

  • How do I copy files from my old pc to my new imac?

    how do I copy files from my old pc to my new imac?

    There are many methods, however you are specific about the type of files you want to move. The first time your Mac turns on it begins with Setup Assistant and asks if you want to migrate from another Mac or PC, you must have missed that. I'd recommend looking over Pondini's Guide and following the directions for using Migration Assistant. You can find them by clicking How to Use Migration Assistant From PC to Mac 10.7 Lion.
    If you have specific files you are attempting to migrate then moving them to an external HD and then just dragging and dropping them from the EHD to the Mac would be very simple. Apple explains migration strategies in Switch 101

  • Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s. I have tried deleting and re-downloading to the phones.

    Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s  phones. I have tried deleting and re-downloading my music library to the phones, but the result is always the same.

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • Workaround--How I put old photo stream on new device

    So I bought a new iPhone and turned on PhotoStream and was pretty upset that only the last 30 days worth of photo stream photos made it back to my device...  I did a lot of reading and found out that nothing was set-up wrong, it was just the way photo stream works.
    Here's the skinny, for any device only the last 30 days worth of photo stream will be transfered to said device upon activation of PhotoStream--for those of us that want to have their old photo stream photo's on their new device there is a work around.
    First, open iPhoto and select "iCloud" from the menu bar on the left, this will show you your photo stream. What was curious to me was that my iPhoto on my Mac Mini had 376 photos, as did my trusty old iPad, but not my brand new iPhone 5S, it only had 100 photos... This is actually how PhotoStream works though.
    So to fix the disparity, and to keep from KEEPING duplicates, you need to go back to the first photo in your PhotoStream on your computer, for our purposes we'll call this photo 1 in your stream, and then highlight through the latest photo that is NOT on your new device, for me this was photo 276.
    Next set-up a new folder on your desktop, and copy the missing photo's to the new folder.
    Now, wait for them to copy to the desktop folder, this should take a few minutes,,,
    Next, go back to iPhoto and delete the selected photos from your photo stream, a warning comes up and says this action cannot be undone, hit ok.
    Then select all of the photos from the new folder, and drag them back to iPhoto, if it asks you about duplicates, hit import.
    Now, wait while your photo stream re-builds ( this will likely only work for 1,000 photos or less )
    Once the photo stream is correct across your devices, for me it was my Mac Mini, my iPad and my iPhone, go back to iPhoto and select the "Last Import" tab from the menu bar on the left, select all of the photos (they are dupicates) and delete them from there.
    You will be left without duplicates and a rebuilt photo stream across your devices.

    Set it up to use the same Apple ID as your other device, then sync your computer to it in iTunes.
    How to use multiple iPhone, iPad, or iPod devices with one computer

  • Missing Mail after transfer to new computer

    Hello,
    My parents were using an old iMac running 10.3.9 so I gave them a "newer" old iMac, running 10.4.11. They use multiple users and I transferred everything from their old computer to the newer one. For mail, I transferred the "mail folder in the library and the mail.plist from the preferences folder in the library. My father's email account works fine and looks exactly the same.
    However, my mother's account is missing emails received before August. Furthermore, many of the emails display the following message when opened: "The message from SENDER<[email protected]> concerning “SUBJECT” has not been downloaded from the server. You need to take this account online in order to download it."
    I have done some research and this problem typically occurs when the mailbox is full or offline. Yet, the mailbox is not full and it is online. Some of these messages can be read on the server's website (comcast.net), but the server only keeps emails for 2 weeks, so any email received before that period is not there.
    What did I do wrong? I followed the same procedure for both my father and my mother so I am confused. Unfortunately, my mother's account was already deleted from the old iMac (my father's still exists). Is there any way to try and get it back?
    Thanks!

    Hi DeeCee48, and a warm welcome to the forums!
    Unfortunately, my mother's account was already deleted from the old iMac (my father's still exists). Is there any way to try and get it back?
    Slight possibilty, You might try Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to, or pot the old iMac in FW Target Mode)...
    http://docs.info.apple.com/article.html?artnum=58583
    What did I do wrong?
    What size is her Mail folder?

  • Trtansferring itunes from my old computer to my new computer

    I have just purchased a new computer and would like to transfer all of my itunes Library from the old computer to the new one. I don't have an ipod or an iphone and I just use the computer to listen to my music. Can any one explain how I might make this transfer.
    tahnks in advance.
    Mister DJD

    How big is your library?
    Can it fit on an USB jump drive?
    If it can, simply copy the COMPLETE iTunes folder from your old computer to the jump drive (it's located: Main Hard Drive/Documents and Settings/Your Name/My Documents/My Music/iTunes) Copy this "iTunes" folder to the jump drive...then transfer this file to the new computer. Assuming you have installed itunes on your new computer, you'll have to replace the blank iTunes folder on your new ":C" drive with the iTunes folder from your old computer.
    I've done this many times and it works flawlessly...after the file transfer, iTunes opens with my old library intact and all of my playlists, etc. good to go.
    One word of caution...if you don't keep your song files inside your iTunes folder, then you will have to make sure all song files are in their "known" location place BEFORE you perform this action or iTunes will open with A LOT of "!" icons. The only way to fix this mess will be to individually search out and find each missing song link! (Not a fun job!)

  • I want to transfer music from an old iphone to a new itunes library , but not working

    I want to transfer music from an old iphone to a new itunes but its not working

    If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
    Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
    If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
    If your note is gone from iCloud.com there is only a few ways to possibly recover it.
    The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
    Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
    To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

  • Xperia Transfer - The easy way of moving your data from an old phone to your new Xperia

    Transferring your information from an old phone to your new Xperia have never been easier.
    With Xperia Transfer this process becomes much more convenient and most important, less hassle for you.
    And we think its important that this process becomes as easy and simple as possible, especially when you got lot of important data stored such as messages, contacts, music collections, albums of photos etc. That you would like to move to your new Xperia phone.
    So if you had a Sony Ericsson/Sony Android phone, other Android phone, iPhone or Blackberry and just got yourself a new Xperia device check out Xperia Transfer to start transferring your information!
    Xperia Transfer is available for PC, Mac and now also via Mobile.
    Show me how!
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

    If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
    Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
    If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
    If your note is gone from iCloud.com there is only a few ways to possibly recover it.
    The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
    Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
    To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

  • How to I transfer my old database to my new computer?

    I have just upgraded my old desktop to a new PC. Everything works except for old data is missing. I have tried taking my database and copying it to the new PC. But this does not work for me as the file is over 1.5 gig.  Does someone have a procedure for doing this.
    Running Lookout 6.02.

    Thanks Ryan,
    I do believe some of the data is corrupt as you suggest. I will try to archive month by month later today.
    I did manage to get the database transferred by detaching the database. This then allowed me to copy the file to a flash drive. I had been unable to copy it before, because I would get an error message, saying the file was in use.
    So I have the database transferred now. 
    However I am getting multiple traces in Hypertrend now. That is for each tag there are multiple lines showing on the Hypertrend screen. Some are giving the expected data and other lines of the same color show straight lines.
    Is there a way of cleaning up these multiple traces?
    If I archive month by month can I recover all the data to the new database?
    Message Edited by WaterWorks on 02-13-2009 08:45 AM

Maybe you are looking for