Missing On-the-go Playlist Functionality

When I choose "Playlist" from "Music", I find that I do not have the option "On-the-go" and "Genius". Is there any way that I can enable it?

On your IPOD, select "Playlist" go to the bottom
where it says "On-the-Go. Select that, the
instructions are there. All you have to do is press
and hold the center button once you have selected an
Album or single song etc. It will add whatever has
been selected.
The question was not how to create a playlist on the go. The question was, if you are already listening to something, how do you add that song to an on the go playlist (while playing).

Similar Messages

  • Have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    Because ratings don't travel with the files or the playlist.
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • Where is the Genius playlist function in the 2.1 software update?

    I have just updated my iPhone Software to the new 2.1 Version, have gone to use the Genius Playlist function and I can't find it. It's not where Steve Jobs says it is on the scrubber bar, nor is it on the playlist menu. Have also tried the settings function to see if you have to turn it on but there is nothing there. Have Apple forgotten to include it or is it hiding somewhere else?

    Before you can use Genius on your device, it has to be enabled in iTunes 8. To learn more about this process, review the information in http://support.apple.com/kb/HT2895.
    Thee is also an article about understanding the Genius here: http://support.apple.com/kb/HT2978.

  • Wish for the dual toned function

    Hi,
    I'm from Germany, so I hope you'll understand me:
    One thing I miss at the dual tone function in Lightroom 3 Beta 2 is the possibility to set the satiation down. I love this function and work a lot with it. It would be great to have a slide control for the satiation which sets the intensity of the dual tone down so that I don't have to reduce both satiations of every colour. It's always hard to find the exact balance again.
    I am using Lightroom 3 Beta 2 on Windows 7 Ultimate 64 bit and a Core i7 920 CPU with 6 GB RAM.

    bberenbaum wrote:
    I promise that was only because I have too much time on my hands...
    i have that too

  • "Manage Playlists" function should do more than just edit tra

    The ZEN V Series Media Explorer was poorly designed. The "Manage Playlists" function should do more than just edit the tracks in a playlist; it should also be possible to rename or delete a playlist.

    Create your design on one or more  master slides:    View > Edit Master Slide
    delete unwanted master
    then save as a Theme:    File > Save Theme
    Save as;  is achieved by pressing the option key then File > Save as...

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    nope all my songs are copied and organized into the iTunes library.

  • I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!

    I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!  Help!

    Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
    tt2

  • Vision Acquisition Software installed, BUT why is the IMAQdx missing from the function palette?

    I just installed to the labview 2011, and many other modules and softwares including this VASAugust2010. But the IMAQdx is missing from the function palette (vision and motion). However the NI-IMAQ 4.5, IN-IMAQ IO 2.4.0 and NI-IMAQdx 3.7 are all clearly listed as installed in the NI software (contorl panel -> program - NI). In MAX, my usb webcam is also listed as NI-IMAQdx Devices and works well under MAX. But my own program is broken because the LV can't find those functions. So why the IMAQdx funtion is missing and how to fix it?  
    Thanks,
    Lei

    hi tommy
    check this may helps you http://digital.ni.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392
    Sasi.
    Certified LabVIEW Associate Developer
    If you can DREAM it, You can DO it - Walt Disney

  • Partner Function "Vendor" missing when the sales order is replicated to ECC

    Hi Gurus,
    We are facing a problem on replication of functions partners between
    sales order of CRM and ECC.
    We have downloaded vendors (partners of table LFA1) from ECC to CRM
    following note 883162 and this replication was ok!
    We have mapped all partner functions from ECC to CRM and from  CRM to
    ECC for distribution of partners between systems.
    We must include a vendor using partner function '0000092 - Carrier' on
    our sales order, which is transferred to ECC. However, when the sales
    order is transfered to ECC, the vendor (which was included on CRM) is
    missing.
    When the sales order is created on ECC and the partner (type carrier)
    is included in,  the order arrives on CRM missing only the partner
    number, because the partner function is there.
    How to fix this problem?
    Best Regards,
    Nivea Faria

    Hi,
    See this Note : 975195
    Hope this helps.
    Best Regards
    Shiven

  • I downloaded iTunes 11.1 and when I went to open iTunes after the download, all of my music, podcasts, playlists, etc were missing. The only thing in my iTunes now is my purchased items. Does anyone know how to get my content back in my iTunes?

    I downloaded iTunes 11.1 and when I went to open iTunes after the download, all of my content (music, playlists, podcasts, etc.) was missing. The only thing there is my purchased items. Does anyone know how I can get my content back in my iTunes?

    See Empty/corrupt library after upgrade/crash.
    tt2

  • Playlists - getting back the ease and functionality of iMixes

    With iMixes, it used to be possible for a friend to put together an iMix and send me the name. I could then just drag that from the iTunes store into iTunes on my Mac as a playlist. When I when into the playlist it would instantly tell me which songs I already had and which I'd need to buy.
    With the loss in iMixes, I can still be sent a Playlist, but then I need to drag each song one by one from the Playlist on iTunes into a playlist on iTunes. When I go into the playlist, it now shows that I need to buy every song. Its not until I try to buy a song that it wells me I already own the song. Even then, I need to find that song in my iTunes library and drap it into the playlist and delete the original playlist entry.
    Whereas I could get a playlist for dozens of songs and deal with it in a few minutes in the past, it now can take an hour to effectively do this whole process manually.
    This would seem to be a massive loss of functionality and makes it harder to effectively share playlists, and to buy lots of music. How spent hours trying to find a simple solution for this.
    Would welcome suggestions of how to get back to the simple functionality that iMixes gave.
    Thanks.

    Hi,
           By God's sake, the Field Selection Key was not deleted form the list. So, my problem has been solved.
    I was supposed to do as per your guidance.
    But, nothing danger had been happened.
    Any how, all is well.
    Thanks for your support.
    Regards,
    Srinivasa M.S
    +91-9910077829

  • Missing: Adding the "Now Playing" song to a Playlist

    I have a lot of songs but I want to manage my music by creating playlists on the go, so I purchased an iPod Touch and Stuffed in all my music to iTunes to sync to my iPod Touch. Done.
    Just found out that you can NOT add the currently playing song to a playlist, new or existing. The easiest way to add the currently playing song, to a new or old playlist is to (This will be long), first, memories at least a few keywords of that currently playing song e.g. title, artist, or album, and then go to Playlist tab, select the playlist or add a playlist..., click on Edit, click on add song, search the song and add to Playlist, Click Done. Not easy.
    I find this very time consuming. I expected to see iPod Touch have this as a very very basic feature.
    My question: Is there a Product Enhancement Request already submitted about this? I had my iPod Touch with iOS 4 when I purchased it. Now I have iOS 5, no fix to this issue still.
    It would be really really appeciated if Apple's Product Management Team could give us a heads up if this feature will ever be available.
    Kindest Regards

    I second that.  I just use the "recently played" playlist as kind of a makeshift on-the-go playlist.  But to create a playlist from scratch, they've GOT to make it easier than scrolling through thousands of songs. I just don't create playlists on the ipod touch/iphone anymore.  I do it on iTunes and sync it to the device.
    Maybe they think playlists are just too "old-school".  They have "cutting-edge" features (no doubt to appeal the younger folks) like play a song by saying the song name, yet they don't give you a basic feature like on-the-go playlisting.

  • On-the-go playlist bug when it contains podcasts (will not play them)

    Hello,
    I want to report a bug in the iPod Nano 3rd generation. Here are the steps to reproduce, first to check that the playlist works with only songs, and then to see that it does not work with songs and podcasts, and lastly to see that it does not work at all with only podcasts.
    1. Clear the On-the-go playlist.
    2. Add any number of songs to the On-the-go playlist (let's say 3).
    3. Confirm that you can play the playlist by selecting it in the list of playlists and hitting the play button on your iPod. The Now Playing screen should say "1 of 3".
    1. Clear the On-the-go playlist. If it was playing it should now be stopped.
    2. Add any number of songs to the On-the-go playlist (we'll add 3 for now).
    3. Add at least one podcast to the On-the-go playlist.
    4. Highlight the On-the-go playlist in the list of playlists. It should say "4 Songs".
    5. Hit the play button. The Now Playing screen will say "1 of 3". At the end of the third song you will be returned to the Playlists screen without the podcast ever having been played.
    1. Clear the On-the-go playlist.
    2. Add at least one podcast to the On-the-go playlist. We''ll add 2 podcasts.
    3. Go the Playlists screen and highlight the On-the-go playlist. It should say "2 Songs".
    4. Hit the play button. The Now playing screen should show, the songtitle displayed is that of a song that was playing recently. There will be no album art displayed, even if that last songs did have album art associated with it. The screen will say "1 of 0" and there is no sound. There is no play/pause indicator next to the battery indicator. The time indicators are "0:00" and -"0:00" left and right respectively. You can hit the center button and try to scrub the position on the bar, it will not go beyond the time of the last song that was played on the iPod.
    Should you reset the iPod and try to play the playlist with only podcasts now, the screen will have no song information, just the missing album art picture and "1 of 0". There is also no time indicators and the bar on the bottom is as wide as the screen minus its normal padding.
    If you hit the center button while in the Now Playing screen with the "1 of 0" display, and you then try to scrub the player the iPod will reset.
    Can someone confirm this bug? Is there a fix?
    I really like to have multiple podcasts in the On-the-go playlist when using Nike+ and now I can't. I don't like to have to reach for my iPod during running to start another podcast, because you have to pause the workout to do that. I don't want to save the playlist, because I won't ever use it again, so I'd just have to remove it again. If it could just work, that'd be great, thanks!

    Well, I guess Apple just doesn't care about bugs in the iPhone or customer satisfaction. Just as long as they have the money they couldn't care less about anything else.
    Thanks Apple!

  • Field names Missing in the (Excel) Mail attachment

    Hi ,
    I am trying to send my ALV Grid Output as Excel Email attachment using the below code
    The problem is that the field names are missing in the receivers Mail.
    i.e
    *Name*   *Emp Code*   * Branch*         "this is missing
    abc         123                 ukp
    I searched many threads but unable to find the solution for this.
    Kindly suggest me regarding this issue.
    loop at p_eadd.
        if p_eadd-low <> space.
          clear reclist.
          reclist-rec_type = 'U'.  "Internet-adress
          reclist-receiver = p_eadd-low.
          reclist-express = 'X'.
          append reclist.
        endif.
      endloop.
    * endif.
    * Send the document
      call function 'SO_NEW_DOCUMENT_SEND_API1'
         exporting
              document_type              = 'RAW'
              document_data              = doc_chng
    *         PUT_IN_OUTBOX              = 'X'
         tables
              object_content             = objcont
              receivers                  = reclist
         exceptions
              too_many_receivers         = 1
              document_not_sent          = 2
              operation_no_authorization = 4
              others                     = 99.
      ld_aplstat = '4'.
      case sy-subrc.
        when 0.
          loop at reclist.
            if reclist-receiver = space.
              name = reclist-rec_id.
            else.
              name = reclist-receiver.
            endif.
            if reclist-retrn_code = 0.
              write: / name, ': succesfully sent'.
            else.
              write: / name, ': error occured'.
            endif.
          endloop.
          ld_aplstat = '0'.
        when 1.
          write: / 'Too many receivers specified !'.
        when 2.
          write: / 'No receiver got the document !'.
        when 4.
          write: / 'Missing send authority !'.
        when others.
          write: / 'Unexpected error occured !'.
      endcase.
    *.Tell workflow to go on
      clear ls_scma_event.
      ls_scma_event-wf_event = cs_wf_events-finished.
      ls_scma_event-wf_witem = wf_witem.
      ls_scma_event-wf_okey  = wf_okey.
      call function 'KPEP_MONI_CLOSE_RECORD'
        exporting
          ls_key        = gs_key
          ls_scma_event = ls_scma_event
        changing
          ld_aplstat    = ld_aplstat
        exceptions
          no_id_given   = 1
          others        = 2.
    call function 'SAP_CONVERT_TO_XLS_FORMAT'
          exporting
           i_field_seperator          = ' '
           i_line_header              = 'X'
            i_filename                 = p_file
    *   I_APPL_KEEP                = ' '
          tables
            i_tab_sap_data             = it_final
    * CHANGING
    *   I_TAB_CONVERTED_DATA       =
         exceptions
           conversion_failed          = 1
    *   OTHERS                     = 2
        if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
    Thanks in Advance,
    Mr. Ben

    Hi Ben,
    Follow the code below....
    Your internal table it_final will have the attachment data. After you got the attachment data do the following
    gc_ret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
    lt_attachment        TYPE TABLE OF  solisti1 ,
    gt_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE,
      CLEAR:gs_attach.                      <this will have your attachment, declare a structure which contains fields of your  excel sheet>
    <before this you have to copy all the fields from your final internal table which should be attached to email to gs_attach>
    For attaching field names
        CONCATENATE gc_ret gs_attach INTO gs_attach.
        gs_attach = gs_attach+1.
        APPEND gs_attach TO gt_attach.
    CLEAR:lt_attachment.
          lt_attachment[] = gt_attach[].
    SORT  lt_attachment .
          DELETE ADJACENT DUPLICATES FROM lt_attachment COMPARING ALL FIELDS.
          CLEAR gs_attach.
          CONCATENATE <field names >
          INTO gs_attach SEPARATED BY gc_tab.
          INSERT gs_attach INTO lt_attachment INDEX 1.
    <field addition ends>
    call function 'SO_NEW_DOCUMENT_SEND_API1'
         exporting
              document_type              = 'RAW'
              document_data              = doc_chng
            PUT_IN_OUTBOX              = 'X'
         tables
              object_content             = objcont
              receivers                  = reclist
            contents_bin               = lt_attachment
         exceptions
              too_many_receivers         = 1
              document_not_sent          = 2
              operation_no_authorization = 4
        if sy-subrc  0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
    Regards,
    Aravind.

  • 'Save layout' button missing in the ALV report layout screen

    Hi Friends,
         In one of our ALV report the 'save layout' button is missing in the report output screen.i have used the OO concept for creating the ALV output and not the function module.I have attached the code below used for creating the ALV grid.
    CREATE OBJECT alv_grid
          EXPORTING i_parent = g_container_2.
    CALL METHOD alv_grid->set_table_for_first_display
         exporting
                   i_structure_name = 'PA0002'
                   is_layout =
           CHANGING
                     it_outtab = gt_outtab
                     it_fieldcatalog = wa_fieldcat.
    But i'm not able to trace why the 'save layout' button is missing in the output.Can anyone of you help me in sorting out this problem.
    Thanks and Regards,
    Vadivel.

    Pass <u><i><b>A to I_SAVE</b></i></u> parameter. That will give the options to the user to save the layout outs.
    I_SAVE = SPACE
    Layouts cannot be saved.
    I_SAVE = 'U'
    Only user-defined layouts can be saved.
    I_SAVE = 'X'
    Only global layouts can be saved.
    I_SAVE = 'A'
    Both user-defined and global layouts can be saved.
    Regards,
    Ravi
    Note : Please mark all the helpful answers
    Message was edited by: Ravikumar Allampallam

Maybe you are looking for