Missing 'open view' functionality in 0ADHOC_TABLE (0ADHOC), web template

Hi - it appears that the 'open view' functionality is missing as button in web template 0ADHOC_TABLE (0ADHOC), despite there is 'safe view' functionality (button).
Did someone add this button/functionality to 0ADHOC_TABLE?
What is the correct Javascript coding as we already tried to incorporate the 'open view' Javascript from template 0ANALYZER what does not work in this matter!
Thx for any hint!
Rgrds,
Markus
Message was edited by: markus hoerr
Message was edited by: markus hoerr

Hi,
as described in the documentation you have to add first HELP_SERVICE and HELP_SERVICE_CLASS to your Web Item
http://help.sap.com/saphelp_nw04/helpdata/en/53/295640a2f78437e10000000a155106/frameset.htm
This is done in Template 0ANALYZER with the TITLE Web Item. Just copy those 2 parameters from 0ANALYZER to 0ADHOC Template, then it should work.
Heike

Similar Messages

Remove "inforarea" option when press "open view" in 0ADHOC web template

hello expert,
in a web template 0ADHOC, when you click on "open view" it gives you the option to select your view from history, favorites, roles, and infoarea.
I'd would like to remove the possibility to select a view from "infoarea" in the web template (a little bit like hiding the infoarea button in Bex using S_RS_FOLD).
How can I achieve this?
Many thks in advance,
/Sid

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

WAD: Missing Items in 0ADHOC Web Template

In the Web Application Designer, when I open the 0ADHOC Web Template, it comes up with several missing items. Specifically, SAP_BW_TEXT_!llD_119, SAP_BW_TEXT_!llD_129, SAP_BW_TEXT_!llD_132.
Also, for some Web Items the image is missing. The web items are the Query View Selection, Broadcaster, Data Provider. There is a little red 'x' mark in the left hand side and the words "Image is missing"
Has anyone encountered this? If so could you pelase help me.
Thanks.

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

0ADHOC web template - How do I execute query views?

Friends,
I am using 0adhoc web template as default. After executing a query I use drill downs and change output and then I click on save view and fill in all the required fields. I can find all those query views in BEx analyzer but not on web report. How do I execute query views from web report?
Thanks in advance.
Message was edited by:
BJ P

Thanks for your input. My users are using save view option on web report and they want to run previously saved views. There should be a way otherwise why would they put save view option.
Any suggestions??????

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Calling a function module from a Web Template

Hi,
I need to call a function module from a web template. Any pointers on how i can do this ? Is this even possible ?
Thanks
Shailesh

Hi Rael,
We were finally able to call a FM module from the Web. The trick as Heike suggested was to create an ABAP class which inherits from CL_RSR_WWW_HELP_WINDOW. Then you should modify the process_cmd method of this new class in order to call the FM. Now use this class to create a help service. In case you need to pass any parameters to the FM, you will need to pass them as additional parameters while calling the help service.
An example is below.
CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=ZBOOKMARKING&TEXT=mytext&URL=myurl
Where mytext and myurl were the parameters i pass to my FM and ZBOOKMARKING is my help service.
Thanks a Lot to Heike for his help on this !!
Shailesh

Mandatory Variable set in a view doesn't show in Web template ?

Hi Experts,
I have a mandatory user-input variable in my query. I build a view based on the query. When I opened the query analyzer I had to select a value for my variable since it is mandatory. I did so and built my view. I based my BI web template on my view. When i execute the template the variable screen doesn't show, the value of my variable is the one I entered when I built the view and there is no way i can change this value from the Web template. Is this expected behaviour ? If so how can i build a view when i have a mandatory variable withoit setting its value in the analyzer ? The user has to set it later in the BI template.
Thanks a lot
Rado

Thanks for the reply.
Actually the variable has a default value which is defined in a function. This default can be overriden. The problem is that when defining the view you need to specify a value or leave the default. In any case in Web Template you are not given the option of changing whatever you put in the query analyzer. i am puzzled how this could happen.

Displaying name of the Used Query-View in a Web Template

Hello Experts,
I am using a Query View as Dataprovider in a Web Template.
Now I would like to display the name of the View.
But with a Text Element this isn't possible.
You can only display the name of the Query.
Is there a way to display the name of the used Query-View?
Thank you for your help.
D.Kramer

Hi Sumit,
hi Björn,
thank you for your hints.
We use a template to enable users to create Views.
So its dynamic.
That way we don't know the Name of the Views in advance.
(So putting the text into 'Title' is not possible)
We already use the "Query View Selection". This works out for users that are able to see different Views. (Power User)
But is it also possible to display the Query View Name in an Item or with html methods for those templates where there is only one View (as dataprovider) we don't know in advance?
Thanks again.
D.Kramer

Web Template Inconsistent

Hi Guys,
I have a problem with my web templates. I transported my web template to QA system and when I try to open it, it says that the web template is "Inconsistent". It opens fine in Dev. Do u think I have missed something in the transportation. I have the query on which the template is based already in QA

Hi Bhanu,
Thats exactly the problem I believe. It doesnot have the LOIO and PHIO entries in the transport? I had include the webtemplate with only necessary.
Only the webtemplate is added to the transport and no other object. Could you please tell me, how the other objects can be included.
Thanks,
Doniv

Cell Style / Web template

Hi,
I have a web template in which there are 6 tables( 6 Queries).I want to have the first column width fixed for all Queries and same cell style. Where can I specify the same?
I am able to achieve same cell style by forcing SAPBEXstditem2 a copy of SAPBEXstditem with the required changes in stylesheet.
For this I wrote the following code in method STRUCTURE_CELL.
IF L_DATA_PROVIDER = 'SPRDP10'.
CASE I_X.
WHEN 1.
C_CELL_STYLE = 'SAPBEXstdItem2'.
ENDCASE.
ENDIF.
Can someone help How to achieve same width for the first column in all tables. Is there any possiblities to specify cell width also in stylesheet?
Thanks in advance
Regards
Rajooooooooo

Hi Soniya,
You can use a style sheet for displaying the report in the web and a separate one for print settings ans styles. In the WAD, when you open a template, see the Properties window > generic tab > Here you can see an entry in the StyleSheet field. If you click on the button next to this then you can select from the list of available stylesheets.
To view the HTML for the web template simply click the HTML tab at the bottom of the screen. Or you can also view this in the BW system SE38 > RS_TEMPLATE_MAINTAIN.
Hope this helps...

Web Template Changes not visible after transport from Development to Test

Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly transported from development to the test environment, but we are still seeing the old version of the template when the report is executed. We are able to see the web template changes in the Web Application Designer in the test environment. We believe this is a caching issue and have cleared the query cache and the HTTP cache in SMICM. Unfortunately, this has not resolved the issue. Can you suggest another approach to resolve this issue?

Not sure what you mean by browser cache. We have deleted history, cookies, and all temporary Internet files. The issue isn't limited to a single user, but exists for all users. Through extensive testing we have established that you are able to see the web template changes in test in the WAD(Web Application Designer) after they have been transported from development, but can only view the changes when the web template is run for the first time. Changes to existing templates can be seen in the WAD in test, but are not seen when the report is run. The old version of the template appears to held in cache somewhere, but we haven't been able to find it and clear it.

PreCalculated Web Templates

Hallo,
I recently had to setup some precalculated web templates to improve query response time for users. But I have some doubts which could not be addressed even after I referred to course materials which I used when attending BW course a year back.
I'm not sure if you guys can answer these:
1.How are web templates created by Reporting Agent assigned to users? Where is it stored? Is data displayed in HTML or in Excel but only if exported?
2.Is it a must that all precalc webtemplates be run in backgnd?
3.Does a Query Value in parameter Data_mode mean the various modes like 'STORED', 'HYBRID' etc? Are these also termed as Reserve variables?
4.What is meant by the 'javascript functions' used in precalc web templates?
5.What is a New Data Mode Parameter? Can it be specified in the URL like 'STORED'?
6.When Stored mode, where is the precalc data stored? Where is a Rep Agent storage? What format?
7.Are all data_mode except new mode accessing precalc data in html option?
8.What does a precalc batch run mean? A Scheduled run of Reporting Agent?
9.How is control query defined?
10. Is 'stored' mode precalc data stored in HTML option? Does this mean HTML format? Or every precalc is stored in html option? Can I say html option = html format?
sincerely,
Adette

Let me try to answer some (answers next to questions).
cheers,
Ajay
> 1.How are web templates created by Reporting Agent
> assigned to users? Where is it stored? Is data
> displayed in HTML or in Excel but only if exported?
--: These are calculated by background jobs that you schedule as packages. These are stored in Reporting Agent Storage. You can think of it something akin to SPOOL. It is not a DB table or structured data store that you can access independently. Data is available in HTML.
>
> 2.Is it a must that all precalc webtemplates be run
> in backgnd?
--: If you use data_mode = NEW, it will run online (ie read data in realtime). The purpose of precalc is to run it in background, that is why it is 'PreCalc'.
> 3.Does a Query Value in parameter Data_mode mean the
> various modes like 'STORED', 'HYBRID' etc? Are these
> also termed as Reserve variables?
--: Yes to the first part. Don't know if it is termed as reserve variable.
>
> 4.What is meant by the 'javascript functions' used in
> precalc web templates?
>
> 5.What is a New Data Mode Parameter? Can it be
> specified in the URL like 'STORED'?
--: READ can be specified in the URL. Its effect is to disregard any precalculated data and read the data afresh from DB. In this case, OLAP doesn't check the reporting agent storage area, it goes directly to DB to fetch the data from there.
>
> 6.When Stored mode, where is the precalc data stored?
> Where is a Rep Agent storage? What format?
--> Reporting agent storage can be thought of something similar to SPOOL. It is 'unstructured data' as you would think. STORED mode (and other modes) is when you are executing the query. When you have run the package, the template o/p has been stored in the reporting agent storage area. The mode parameter in the URL only directs OLAP to read from (if it is specified STORED, it will read from RSA, if NEW it will read from DB and so on).
>
> 7.Are all data_mode except new mode accessing precalc
> data in html option?
--: Not exactly as I understand. See the details of DATA_MODE for other options.
>
> 8.What does a precalc batch run mean? A Scheduled run
> of Reporting Agent?
--: Yes. The precalc definition is just that. You need to then define a package and include your definition of precalc in it and then run this package.
>
> 9.How is control query defined?
--: Control query is another query whose output is to be used as input (if you have filters on same CHAR.. in main web template) . This query is defined independently as any other query, you include it as a predefined query in your template def.
> 10. Is 'stored' mode precalc data stored in HTML
> option? Does this mean HTML format? Or every precalc
> is stored in html option? Can I say html option =
> html format?
--: You can say the precalc o/p is stored as HTML (not strictly true, you have two checkboxes to precalc data and HTML, normally you check both in which case your statement is true).
>
>
>
> sincerely,
> Adette

Precalculated web template w/control query

I create a precalculated web template with settings:
1. Data
2. HTML web pages
3. Control query
I scheduled the package. How do I access the views from control query in Web Template URL?

Hi Raynald,
1. When you marked "HTML web pages" then "Data" are calculated automatically.
2. the html-pages can you see in RSRAPS.
3. To started this page in IE:
- see the index.htm
- http://ipaddress:prot/sap/bw/BEx?sap-language=%20&bsplanguage=%20&CMD=LDOC&TEMPLATE_ID=ZQUERY&DATA_MODE=STATIC&filter=...
Sven

04s WAD: Cannot see assigned roles and web templates

Hi,
when i log into the 04s WAD, i am unable to see the roles that are assinged to my id as well as teh templates assigned to those roles. using the "find" function does not return web templates that i should be able to see. I am able to see the roles & web templates when logging in through the 3.x WAD.
We are on SP11. any suggestions are appreciated. Thanks!

Hi,
You should migrate your 3.x WAD to see them with the new WAD.
-> Tool -> migrate.
You can see the old WAD with the 3.X WAD.
hope it help's

OPEN VIEW button missing in BEx report

Hello!
When I open BEx report, I can see buttons for managing report. I can see SAVE VIEW, BOOKMARK, VARIABLE SCREEN, Exceptions and Conditions, COMMENTS, EXPORT TO EXCEL, EXPORT TO CSV.
I have SAP BW 7.0 installation.
Button OPEN VIEW is missing, although I saw this button in one other 7.0 BW installation. Why is this button missing?
On WAD reports I can put this button on report.
Thank you
Gorazd

Hello,
Is this Java Web or Abap Web?
Due you are on BW 700, I assume you aer using Java.
First, the Open View button doesn't exist.
You have to click on New Analysis and select View.
However, per I can see you don't have New Analysis button.
Ensure you are using the standard SAP templates.
Go to RSCUSTV27 and let all fields blank.
Then, re-active the 0ANALYSIS_PATTERN template.
This should works...
Kind regards,
Edward John

Missing 'open view' functionality in 0ADHOC_TABLE (0ADHOC), web template

Similar Messages

Maybe you are looking for