Missing operator O`where?

Hello, I have been look at my code and I can`t see where my missing operator is.That I get an error for.Can anyone help me.
cmdAddress.executeUpdate(
"Insert Into Address " +
"([FirstName], [LastName], [Address], [City], [State], [Postcode], [Country], [EmailAddress], [HomeNumber], [FaxNumber]) " +
"Values('" + tfFirstName.getText() +
"', '" + tfLastName.getText() +
"', '" + tfAddress.getText() +
"', '" + tfCity.getText() +
"', '" + tfState.getText() +
"', '" + tfPostcode.getText() +
"', '" + tfCountry.getText() +
"', '" + tfEmailAddress.getText() +
"', '" + tfHomeNumber.getText() +
"', '" + tfFaxNumber.getText() + "')");

Create a string containing your complete SQL statement and print it out. Take a look at the printed string and you should be able to see the problem.

Similar Messages

  • Missing Operating System

    I have a Lenovo T500 Thinkpad.  I turned off my laptop and now when I turn on the laptop I receive a message that states "Missing operating system". I do not have any recovery disk or install disk.  How do I fix this error?  The only thing that I have been able to access is via the blue ThinkVantage key.  I receive a screen that has a Startup Interrupt Menu with three options.  ESC to resume normal startup, F1 to enter the BIOS Setup Utility or F12 to choose a temporary startup device.  I see the messages where the drives are partitioned and I should be able to set back to factory standards somehow, but I sure don't know how to even begin. Can anyone help me, as I am clueless.
    Thank you

    Hi kew659 and welcome to the forum!
    Per support page, your T500 came with Win XP pro. Even if you contact lenovo to buy recovery discs, I think they would only sell you Win XP media.
    Try following, it will work if you had a good recovery partition of Vista or XP:- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013955
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Z77A-GD65, "Missing Operating System" after running Live Update

    So here's the brand new computer I assembled:
    $309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
    $219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
    $199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
    $179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
    $159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
    $119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
    $99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
    $99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
    $99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
    $74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
    $59.40 CNPS9900MAXR Red CPU Cooler
    $49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
    $34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
    $10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
    $9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
    I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume.  I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD.  I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
    The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates.  Constant errors as I went along, but generally it'd just skip to the next installation attempt.  When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System".  Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed).  I switched the BIOS switch over, no dice.  Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
    Thanks in advance for any rendered assistance that leads to resolution.

    The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P  AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed.  I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking.  Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue?  Alas, all were borked.  It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
    As far as I can recall I'm using up to date BIOS, the last one or two.  One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff.  I believe I have all the drivers up to date as well.  Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious 
    I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
    Meanwhile, the good news is that the system has been fully operational and hella stable.  I hadn't slept in almost 3 days, playing and installing stuff nonstop.  The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping.  That's just astounding 

  • HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

    Hello
    I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
    I made an image of it , then deleted win partition from utility disk , ( wrong idea )
    I didn’t notice that boot camp  could erase win partition , anyway I have tried several times , and always after reboot boot camp
    I get the same
    Missing operating system .
    If I boot from dvd install win or if i boot from the boot win partition.
    hd and partitions looks OK to utility disk
    Any idea to fix the problem ?

    I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
    I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
    If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
    I don't know what links you have so i'll just include everything:
    Installing boot camp on a Late 2009 iMac:
    http://support.apple.com/kb/TS3173
    Direct link to Late 2009 iMac-specific Windows drivers.
    http://support.apple.com/kb/DL995
    I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
    Hope this helps.

  • Missing operator in query expression

    Greetings,
    I'm attempting to access a MS Acess database, but getting the following error.
    Syntax error (missing operator) in query expression 'Org Name'.
    The error occurs between the following two lines.
    String SQL = "SELECT Org Name FROM OrganizationTable";
    ResultSet resultset = statement.executeQuery(SQL);Where Org Name is the data set I'm trying to access and OrganizationTable is the database table.
    Any help would be appreciated.

    What is happening is that the interpreter is seeing
    "Org Name" as two different columns and/or values and
    is expecting an operator. Somehow you need to
    indicate that it should be interpreted as a single
    column.
    Try one of these (I'm not sure if one will work since
    I don't work with access much, but I'm guessing that
    it would work similar to other dbs I've used):
    String SQL = "SELECT [Org Name] FROM
    OrganizationTable";
    or
    String SQL = "SELECT 'Org Name' FROM
    OrganizationTable";
    Thanks boss,
    I started to get it figured as I was able to open a result set that didn't have any whitespace in the name in the same table.
    FYI, [Org Name], did the trick. Single quotes do not work.
    Thanks again :)

  • [ODBC Microsoft Access Driver] Syntax error (missing operator)

    Aello' - as you can see in my database table their are two
    records to delete based on the HISTORY_ID of 1. This was working
    just fine when I was using a MS SQL Server database but when I
    switched to the MS Access database I get this error now.
    Is their a syntax difference?

    mikeap wrote:
    > Attached code. Clearly their are records to delete, what
    am I missing?
    >
    > Using MS Access database.
    >
    > [Macromedia][SequeLink JDBC Driver][ODBC
    Socket][Microsoft][ODBC Microsoft
    > Access Driver] Syntax error (missing operator) in query
    expression
    > 'R_PROJECT_MEDIA WHERE Media_ID IN (1)'.
    >
    > <cfquery datasource="tbar">
    > DELETE R_HISTORY_MEDIA
    > WHERE History_ID IN (#FORM.pHistory#)
    > </cfquery>
    DELETE
    FROM R_HISTORY_MEDIA
    WHERE History_ID IN (#FORM.pHistory#)
    Jochem
    Jochem van Dieten
    Adobe Community Expert for ColdFusion

  • Syntax error (missing operator) in query expression

    Hi all
    I am creating a couple of pages where a dynamic list is created from an access database and then products from that list are displayed, the user then has the option of clicking more details, this then should pass the KITID over to the details page, However when i click on the details page i get the following error
    Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
    [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'KitID = Kit 01'.
    /classicclocks/Kieninger_gallery.asp, line 21
    Here is the code from the page i am building, can anybody see anything obvious here
    strKitID = Request.QueryString("KitID")
    ' If KitID does not exist then redirect to Gallery page
    If strKitID = False Then
      Response.Redirect("kit_gallerytest.asp")
    End If
    ' SQL Query for specific KitID details only
    Dim objRS
    Set objRS = Server.CreateObject ("ADODB.Recordset")
    ' Open new objRS
      strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = " & strKitID & " ORDER BY KitID"
      objRS.Open strSQL, MM_dbConn_STRING,,,adCmdTable
      ' Get all rows from table and asign values to array for use in form
      Do While Not(objRS.EOF)
      Images = True
      fsImagesArray = objRS.GetRows()
        Const arrKitID = 0
        Const arrImgKitCatalogue = 1
        Const arrKitDescriptionShort = 2
      Loop
    ' Close objConn and objRS
    objRS.Close
    strSQL = "SELECT * From tblMovements WHERE KitID = " & strKitID
    objRS.Open strSQL, MM_dbConn_STRING
    thanks
    John

    String values in a SQL where clause must be wrapped in quotes. Try this:
    strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = '" & strKitID & "' ORDER BY KitID"

  • Help! This is driving me crazy. CASE statement report syntax error (missing operator)

    Hi
    Can anyone help with this SQL statement please. It uses a
    CASE statement but I keep getting back a syntax error (missing
    operator) error message. The SQL statement works without the CASE
    statement, so everything else is fine - its just when I put the
    CASE statement back in.
    Here's the SQL statement:-
    SELECT transactions.ourRef, transactions.transDate, CASE WHEN
    transactions.transTypeID = 2 THEN transactionDetails.goodsVatable *
    -1 ELSE transactionDetails.goodsVatable END,
    transactionDetails.goodsNonVat, transactionDetails.VAT,
    transactionDetails.grandTotal, clients.clientCode,
    transTypes.transTypeDesc
    FROM transactions, transactionDetails, clients, transTypes
    WHERE transactions.transID = transactionDetails.transID
    AND transactions.clientID = clients.clientID
    AND transactions.transTypeID = transTypes.transTypeID
    TransID = 2 means that its a credit not instead of an
    invoice, therefore I want the goods vatable returned as a negative
    number.
    Thanks in advance.
    Wez

    quote:
    ...the client wishes for me to use an MS Access db
    Too bad you didn't say that to begin with. I believe that
    with Access you might consider using IIF().
    Syntax:
    IIf(expr, truepart, falsepart)
    SELECT transactions.ourRef,
    transactions.transDate,
    IIf(transactions.transTypeID = 2,
    transactionDetails.goodsVatable * -1,
    transactionDetails.goodsVatable),
    transactionDetails.goodsNonVat,
    transactionDetails.VAT,
    transactionDetails.grandTotal,
    clients.clientCode,
    transTypes.transTypeDesc
    FROM transactions, transactionDetails, clients, transTypes
    WHERE transactions.transID = transactionDetails.transID
    AND transactions.clientID = clients.clientID
    AND transactions.transTypeID = transTypes.transTypeID
    Phil

  • [solved: PEBKAC] syslinux woes: "Missing operating system"

    In light of http://mailman.archlinux.org/pipermail/ … 23211.html I decided to try syslinux, but couldn't get it to work. I think I followed the wiki (i.e. the /boot partition is marked active etc.) but still got  "Missing operating system" error and had to use a liveCD.
    If anyone is using syslinux for their bootloader, can you pleas post the configs or give me a hint what could have gone wrong?
    Last edited by karol (2012-07-13 22:25:03)

    I use syslinux (or more precisely the extlinux that boot from an ext{2,3,4} partition) successfully. Hereafter I briefly post what have to be done. If it still does not work. Repost posting exactly what you have tried.
    1) create a directoty /boot/syslinux, containing syslinux.cfg and possibly modules that you will refer in this file (notably menu.c32 and chain.c32). You can put symlinks on the condition that the symlinks point to file in the same partition.
    small edit: pay attention of 2) if you use symlinks. the / of the pointed file is the root of the partition where syslinux it. It does not correspond to the way you see it in the system if this partition is not mounted in /. See 2).
    2) Place syslinux.cfg in this directoty. The root of the file mentionned are relative to the root of the partition containing the /boot/syslinux directory. You can also use relative paths that are relative to the directory /boot/syslinux (so if you have a /boot partition, the linux kernel will be referenced as /vmlinuz-linux, if /boot is on the same partition as / then /boot/vmlinuz-linux). I put here my config as an example: http://pastebin.com/zNunwupx
    3) Make the partition containing /boot/syslinux bootable.
    4) Put an mbr on the hard disk to be booted:
    dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda bs=440 count=1
    Replace /dev/sda by your hard disk. If you use gpt partition, you may have to use /usr/lib/syslinux/gptmbr.bin
    5) run
    extlinux /boot/syslinux
    Last edited by olive (2012-07-11 19:18:42)

  • [SOLVED] Mac OS X/Arch dual boot Missing Operating System GRUB problem

    I am attempting to dual boot Mac OS X.5 and Arch on my "unibody" macbook pro.
    I am getting the "Missing Operating System" error over and over. I have followed the Macbook install guide in the wiki and the Beginners install guide. I've also read all the threads I could find on the subject. The common fix seems to be changing the root path on the grub menu.lst... I've tried that. twice. with no luck.
    I have EFI on sda1, Mac OS X on sda2 and Arch root on sda3.
    My menu.lst is pretty much standard with
    root (hd0,2)
    kernel /boot/vmlinuz26 root=/dev/sda3 ro
    for both Arch and the Arcch fallback.
    I'm not sure what else to try. I can give more information, but I'm not sure what else to give.
    Thanks in advance .
    Last edited by Weird Fishes (2009-06-14 15:34:31)

    I know exactly what the problem is.
    If you're using rEFIt, sync your partition tables (should be the menu item called 'Partitioning Tool'). The problem is that GRUB has been installed, but doesn't know where to find the Arch partition.
    After syncing, you may find that the boot process hangs at the Linux logo on a gray background. No worries — just reboot and the problem should fix itself.
    N.B. You will need to do a partition table sync every time you change your hard drive's layout.

  • "Missing Operating System" on boot?

    My Windows side was working perfectly until very recently, where it now displays a "Missing Operating System" error in the BIOS when I start it up.
    I have tried to use EASEUS File Recovery to no avail and it detects the wrong files; OS X also displays the wrong files in my Windows Drive (it appears as if it was a fresh install of Windows). The Windows 7 install DVD does not recognize my OS as being there and I have no idea what to do.
    Any help or suggestions? Or do I need to format my drive and lose all my years school work? (I didn't backup Windows only OS X with Time Machine)
    Thanks

    In fact I've already tried with Ext3 and exFAT, but it didn't work. Even only erasing without creating a new partition doesn't work.
    I already have the driver for read/write on NTFS
    The hatter wrote:
    You moved Windows to higher number.
    Okay , but I just want to remove the partition to a lower one, so He can see the OS, without having to reinstall the whole thing, is it possible ?

  • Portege R100 won't boot from the HDD - missing operating system

    Hello,
    I have a Portege R100 that won't boot from the HD, I get the message "missing operating system".
    I don't have a compatible CD or floppy driver, I just have a 1.8 inch case for the hd, it works, i also have norton ghost 2003 installed in another computer (a toshiba satellite A45).
    I tried to recover the disk using norton and the ghost image in the recovery cds but it keep asking for a password.
    I would like to know if there is a way to use the recovery cds with norton and the usb driver and avoid the password screen (or where can I get the password?).
    Thanks!

    Yes, I know that the recovery cds are password protected, that's the password I'm talking about.
    I'm not trying to boot from a USB stick, I'm using ghost 2003, this way when I reboot the USB device is recognized as a second hard drive.
    I have the option to use the cds to recover from the ghost enviroment but I would need the gho password.
    What I would like to know is if there is a command line to force the cd to ghost the second driver instead of the first.
    I'm not a great fan of norton ghost but I don't have another option, all cd drivers that I have are incompatible with Portege R100.
    Thanks,

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • Missing Operating System Error

    Hello, my aunt asked me to fix her computer but I fix game systems. She had it for a few years, Toshiba Satellite L305D-S5892(model # PSLC0U-02501F).When I turned it on, it said press F2 for Setup Utility and F12 for Boot Manager.After everything, it says " Missing Operating System".I tried everything on setup and boot manager, took hard drive out and put back in, took memory put and put back in , took big battery and put it back.Please Help!!!!!!!

    Can you get it into the bios setup screen.  If so is the hard drive listed.  It sounds to me like a hard drive failure.  If you replace the hard drive you will also probably have to buy a set of recovery disks unless your aunt made a set. 
    L875D-S7232 (Win 8.1)

  • "java ODBC Microsoft Access Driver Syntax error (missing operator) in query

    Hi I am new to java and I am getting this error message when using java to access and insert data into an MS Access database.
    "java ODBC Microsoft Access Driver Syntax error (missing operator) in query expression"
    The commands are
    String insertCommand = "INSERT into MetricOutput(A1,A,DRR,DeRR,RE,WDRR,WDeRR,WRE,ARF,SRF,HRF,WARF,WSRF,WHRF,SDC,WSDC,MAR,WMAR,H1,H11,H2,H21,cluster) "+
                             "VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";

    "VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";After looking at your post in the editor, I see what your real query looks like.  You realize that ",+array[i])" is part of the query, right?  And not actually looking at your Java array?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for