Missing options in text message

When in text messages after selecting a text messages but long touch on the text options 'copy' and 'more' come up. But further options under more is missing. Also in the middle of a phone call the phone gets disconnected and apple logo appears for sometime and then shows the call in progress. Looks like iOS8 has issues and needs an urgent fix

Updated iOS to the latest version 8.0.2. Rebooted, replaced SIM. problem doesn't occur all the time, it's intermittent. Sometimes the keyboard doesn't show up to type name in contact search. Once you reboot it works.

Similar Messages

  • Message settings option for text messages is not c...

    I am using  N73 phone and here i cant go to the message settings option for text messages. actually i want to change my message center.
    Message > Options > Settings > Text Message 
    When i tried to follow above steps it finally ends up with the Main menu. But previously it works fine. I want to know there whether there is another way to set it or i need to go for a phone software installation.
    Thanks.

    The settings can also the sent directly to your phone as an auto install sms from your network. Contact your network and request they send you the sms.

  • Can I turn off the preview option for text messages on my iphone 4s

    Can I turn off the preview option for text messages on my iphone 4S?

    Settings>Notifications>Messages>Show Preview>Off

  • Second phone number for a contact wont appear as an option for text messaging on iPhone 4/IOS6

    My iPhone 4 (IOS6) is a work phone and my number is blocked (I have to call a lot of people while out of the office who I don't want to have my cell number). Since I want my friends to know it is me when I call I save their phone number in my contact list with *82 in front of their number. However, I learned that text messaging doesn't seem to work with *82 in front of the number so I also have each contact saved as a second number without the *82 at the beginning for texting only. After "upgrading" to IOS6 I have found that my texting number won't show up when I type the contact name into the address bar in the text message app, just the *82 number that won't work. It used to list all numbers associated with that contact. I know I could just send them a message from the contact card one time and then just open the thread in the messaging app every time after that, but since I am often driving when I am out of the office I use Dragon dictation to compose my texts and then only have to type the contact name into the address line each time instead of typing an entire message. Long story short, I really need it to list all numbers for each contact and not only the one they randomly decide I might want. I have also checked my contacts and ensured that the non-*82 number is listed first in the contact card, that didn't change anything.

    There is an option in the Settings>General>Reset>Reset Home Screen Layout. Of course this means that your screen layout will be reset but maybe this will 'bump' those hidden apps out of the 'invisible 5th row'. It's worth a try I guess. Did you check to make sure the apps weren't pushed to like the very last screen instead?

  • Sound Notifications for Missed Calls and Text Messages

    Aside from the very small green light in the upper right corner (Bionic) - is there a way to get audio notifications for missed calls and texts?  I'm missing a lot of calls and texts because I'm not checking the screen constantly.  Thanks!

    I am not sure about the Bionic phone specifically but I am pretty sure there should be notification sounds.
    My phone, the Droid 2 global has ringtons, and notification sounds separately.
    Have you tried looking in the sound settings?

  • LG Revolution missing half of text messages

    When I get multiple SMS messages on my phone everytime I look at the conversation in the messaging app the first half of the message is always missing. This occurs everytime I drag the message notification down. If I drag up to just unlock my phone occasionally I can go to the message app and the entire message will be there. It's a 50/50 crap shoot on that one. It really makes conversations tough when my reply is always.. "can you resend the first part again?"
    Resending the message doesn't get me the first half of the message still. Only the 2nd piece I had already received. I did a little reading and the messages im receieving are most likely over the 160 character limit which would break it into 2. It's coming from T-mobile.

    Hi hkell:
    I can understand why you're frustrated with the problems that you've listed. There are a few suggestions I can think of to ensure your issue is resolved. For the texting problem, are you using any 3rd party messaging applications? If so, please remove them and retest using the stock messaging application. If your device is resetting intermittently, I would recommend performing a factory reset on your Revolution.  This will rule out any issues potentially caused by 3rd party applications.
    You can also ensure that your software is up to date. You can check the current version of software here and see if your software is up to date.
    If neither of those has helped in resolving your concern, please feel free to send me a DM. I've followed you to ensure this is possible.  We also have a Warranty Center (Tech Support) line that can reached at 866-406-5154 for troubleshooting.
    Regards,
    MikeS_VZW
    Follow us on Twitter @VZWSupport

  • Text message ringtone additional suggestion

    While it is nice being able to set a ringtone for text messages, during the day i do want to have my text message "ring" set to vibrate.  With the newest update (released 11/15/09), you can only set a ringtone, system sound, or mute it.  when its muted, it doesnt vibrate.
    I'm suggesting that in addition to those 3 options for text message types of tones, to add in a "vibrate" option so that you dont have to turn the phone into silent mode for that to happen.  I would think to either put in in the messaging app preferences, or in the sound and ringtones on the quick launch menu (i think there would be better and easier to access)
    Post relates to: Pre p100eww (Sprint)

    Thank you for this feedback. I would suggest that you also give us this feedback here: www.palm.com/feedback. This way it can be seen and routed to our developers and engineering dept and see if this can be implemented into webOS.

  • How do I disable audio messages in text messages?

    I am trying to disable the audio message option in text messages/iMessages. I have sent several accidentally and would prefer not to have this option. Do you know of a way to remove the ill-placed microphone button, as I can't image ever using this? Thanks.

    '''File|Save As|File''' then in the resulting dialogue, choose "text" file type when saving. Of course in doing so you lose all formatting and attachments.
    How do you search and index messages when saved as independent and free-standing text files? I keep email correspondence within the email client specifically because the tools to manage and search are effective and efficient. In fact I occasionally email myself something that needs to be preserved simply because as email it is so easy and convenient to find and retrieve. Searching for text in documents in Windows has become a chore.
    I'm not at all sure why you want to open email messages from other environments in Thunderbird, only to save them as text files. But have you tried "Edit As New" to see if that will offer other save options?
    What format(s) are these other messages from outlook, gmail, windows live saved in then?
    Don't forget simple old select all, copy and paste to save message content in any other document type.

  • N95 - Unable to send Text Messages

    Hi,
    I just got an N95. Everything works fine with it, I can recieve texts and phone calls, however whener I try to send a text message I get a 'message sending failed' icon. When I go to 'details', it just says 'check network settings'. I don't know what to do or how to sort it - can anyone help?

    The problem is probably caused by the Message Centre Number.
    First contact your network and ask them for the Message Centre Number.
    Once you have the number, goto Messaging>Options>Settings>Text Message>Message centres> Select the message centre in use and set the Message Centre Number to the one given to you by your network.

  • Can't send text message from N95 8GB

    I suddenly cannot send anymore text message from my N95 8GB.
    "Message cannot be sent" - "Verify network settings" - that's what I get.
    Can anyone help? thx.

    Hi sonia78,
    Do you have enough credit/balance to send texts?
    Have you checked the Message Centre number? Contact your service provider to obtain the number, and then update it in Messaging -> Options -> Settings -> Text message -> Message Centres.
    Did you try a SIM from another Service provider? If the new one works, contact your service provider for help.
    You can try these steps one by one, if the steps above do not help:
    1. Turn off your phone, leave your battery and SIM out for 5-10minutes and put everything back in and turn it on .
    2. Restore factory settings: type *#7780# at the standby screen. Enter 12345 for the security code or the one you've changed it to.
    Before you try the next two steps, backup your phone memory using PC Suite.
    3. Soft reset: This will clean up your phone memory. All user data, applications etc stored in the phone memory will be destroyed. Type *#7370#. Enter the security code when prompted
    4. Hard reset: This is the last resort. Turn off your phone, press and hold down these keys: 3, * and the call (Green) button. Turn on your phone without releasing them. Leave the keys only after you see the region selection screen.
    5. Reinstall the firmware: Download and install the latest Nokia Software Updater from the Nokia website. Connect to the internet, connect your phone to the PC and run NSU. Follow on-screen instructions carefully. Make sure you have a full battery and a stable PC before you proceed.
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • N95 TEXT MESSAGE PROBLEM

    So my problem is I have a unlocked nokia n95 its on AT&T. I can receive text messages but I cant send them. Its the only problem im having with it but its a really annoying one

    Go to messaging, options, settings, text message, and check the following settings....
    (1) Msg centre in use = Correct number should appear.Ask the network operator if you are not sure(2)Character encoding = full support (3) Receive report = (Your choice-yes/no) (4) Msg validity = Max time (5) Msg sent as = Text (6) Preferred conn = GSM/UMTS (7) Reply via same ctr = No.
    After doing the above check whether you can send text now.
    Rohinton Contractor

  • Backing up text messages... how long should it tak...

    Hi there, I have been trying to back up my Nokia 5300 using Nokia PC Suite and can't seem to get it to work. I am using the latest version of PC suite - I updated it today!
    Basically, when I go to do the backup, it backs up the contacts etc. very quickly, but seems to stop when it gets to the texts. Now, I haven't done this before so there are probably about 1500 texts for it to save, but even when I leave it for ages the percentage doesn't seem to go up.
    Is it to be expected that it would take a very long time? Should I be leaving it to do its stuff overnight or something?
    I have taken off the automatic keylock because it says not to lock the phone (although I highly doubt this will make a difference). Everything else on the software seems to be running fine, and I can back up perfectly if I untick the option for text messages.
    Thanks a lot!

    Hi renwar26 ,
    Try the following option :
    What you can do is backup only the messages using Nokia Content copier
    Nokia Content Copier allows you to back up your phone's contents on a PC. You can back up the entire contents, or select what you want to back up. You should back up your phone's contents regularly to help avoid losing important data.
    You can restore phone contents to the same phone model from which the backup was originally made, or import contents to another Nokia phone model. If you are restoring a backup file to the same phone model that was originally backed up, existing data in your phone is replaced with data from the backup file.
    Note: Do not use or disconnect your phone while Nokia Content Copier is backing up or restoring the phone contents.
    Note: Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.
    Note: Some content can only be restored to the same phone model from which it was originally backed up depending on what type of data the target phone supports.
    To back up your phone contents
    1. Connect your phone to the PC. Note that a USB cable is the fastest connection type for transferring large files between your phone and a PC.
    2. In Nokia PC Suite main window, click Backup to open Nokia Content Copier.
    3. Click Back up.
    4. From the list of content types available, select what you want to back up, and click Next.
    5. Define a name and a storage location for the backup file, and click Next. After the phone contents have been backed up, click View the report if you want to see detailed information about the backup operation.
    To restore or import a backup file
    1. Connect your phone to the PC. Note that a USB cable is the fastest connection type for transferring large files between your phone and a PC.
    2. In Nokia PC Suite main window, click Backup to open Nokia Content Copier.
    3. Click Restore.
    4. Select a backup file to restore or import, and click Next.
    5. From the list of content types available, select what you want to restore or import, and click Next. After the phone contents have been restored or imported, click View the report if you want to see detailed information about the restoration or import operation.
    You can also try with Nokia Communication centre but this application is still in beta, so 100% not sure if it will work properly or not as its in BETA now. This application is available from Nokia Betalabs or you can do googling to find out more.
    Latest PC Suite version is 6.86.9.3
    Content Copier version 4.0

  • Text Message incomplete or missing? Also-SMS editing / backspace malfunction...

    First issue - sometimes I received text messages that are missing the last few words/characters. I don't think this is an Android or iPhone originated issue as this happens at random from people that I know have different types of phones. Sometimes the 160 character split will break up the message and send the rest in another message, but most of the time I never see the end of the message. I currently use the existing text messaging app in conjunction with the SMS pop-up. The issue was prevalent when I used Handcent and then uninstalled it to see if that was the problem. I have also uninstalled SMS pop-up to see if it was the problem with no luck. I have looked over the settings multiple times and still cannot find anything that would be causing this. Suggestions are welcome.
    Second issue - when editing a text message in portrait mode I may erase multiple characters by holding down the backspace key. On occasion, the app flips out, reverts to showing the very first message that was sent or received for the contact, freezes momentarily, and then two buttons appear on the bottom giving me the option to Cancel or Delete. I will hit Cancel or use the back button on the bottom of the phone multiple times before it will return to my message, which at this point has saved as a draft. This is EXTREMELY frustrating. It does it only at random, but it seems to be getting more frequent. The only option most of the time is to go Home and then return to text messages, find my draft, and use the backspace key carefully (and one quick push at a time to erase) so as not to invoke the same issue.
    I think both of these are bugs that may be inherent with this phone in particular or possibly Gingerbread...
    Thanks!
    -Wes

    I've been having this same issue for the past few months, in my case the problem seems to be more prevalent with text messages originating from other carriers (but not always, occasional partial incoming text issues from Verizon wireless phones as well).  I called technical support, followed all their advice (basic tech advice, power cycle, remove sim, reboot, etc.) and was also transferred to HTC support that recommended a hot fix, which didn't really do anything to resolve the issue, also then did a factory reset and still no resolution.  Not sure what other options I have....besides waiting for a new device when I am able to upgrade.  Off topic, I think its Bee S to not be able to upgrade to a new device within 2 years, when Verizon does not fully support, properly updated/hotfix, existing issues in a timely manner...why is it that we are using and outdated OS, when a new one is out and available.  Another compelling argument to purchase an iPhone (on any carrier), one device, one OS.....everyone gets an update at the same time, and phone issues are rapidly resolved. I can continue my rant, but I'll leave it as is...same issues, different day and I'm sure you've all heard the same rants of frustration.

  • Nokia 6300 Text Message Options

    I own a Nokia 6300 which was Made in Hungary. It came with firmware revision version 5.00.
    I only see 6 options in my Text Message Settings and nothing seems to resolve it. There's supposed to be 10 options. I contacted Nokia care centre and they suggested that I update the software which I did but to no avail.
    I purchased my phone SIM free and completely unlocked. No provider touched my phone.
    1. Message Centres
    2. Msg. Centres in use
    3. E-mail Msg. Centres
    4. E-mail Centres in use (this option is
    greyed out)
    5. Use Packet Data
    6. Character support
    What should be there is:
    1 delivery reports
    2 message centres
    3 msg centre in use
    4 e-mail msg. centres
    5 e-mail centre in use (greyed)
    6 message validity
    7 messages sent via
    8 use packet data
    9 character support
    10 rep. via same centre
    'Delivery reports, Message Validity, Rep. via same centre and messages sent via' are all missing from mine.
    I have reseted my phone on several occasions but it makes no difference in that department. I updated it to 5.50 and still no difference. I'm out of ideas. Can anybody out there suggest anything to me that I haven't already tried ?
    Thank you all.

    Hello,
    I've got the solution!!!
    Okay - I spoke to Nokia - who advised me to speak to my SIM card provider (Orange). Orange said - 'This functionality is not supported by Orange on the 6300'.
    But there is a way around this.
    Borrow one of friends SIM cards (preferably a Vodafone) - insert the card, switch on the phone then go to the messaging menu:
    Message Settings > Text Messages > Delivery Reports (set this to yes).
    Then switch off the phone, stick your own SIM card back in the phone and switch it on.
    If you now go back to the same menu - you will see that, there is no option to set Delivery Reports. However, when you now send a message - it will now indicate when a message is delivered.... JOB DONE :-)

  • Is there a way to stop the missed text messages/calls to be displayed

    On the screen? In other words, they are listed as the number of text messages "not read" but does not show "Susan - Why are you ignoring me?!?" instead I just see that I have 15 unread messages as a number under my Text icon. Which means I have 15 messages to delete, but I digress... Is there an option or 3rd party app to stop these missed calls/text to display?
    Thanks!
    Tony

    There is no option or setting provided by Apple for this, and I don't believe Apple would allow a 3rd party app or utility to provide this function.

Maybe you are looking for

  • Subcontracting scenario(Sale Order wise)

    Hi all We have requirement from our client to map subcontracting process Sale Order Line Item wise, I.e- instead of 541 we will use 311E and send components to vendor (which will create seperate storage location for each vendor). We will receive the

  • 8.1.7.4 on Solaris 10

    Hi Everyone, I tried a search on this but could not find an answer. Does anyone have 8.1.7.4 database running on Solaris 10? I know Oracle does not certify this, but I'm being asked to move my old 8i databases to a new Sun server running this version

  • Can't update SQL 2014 DB during web publish from Visual Studio 2013

    According to Visual Studio 2013 I have "SQL Server Data Tool 12.0.40706.0" installed, which should allow me to update a SQL 2014 database but when I try to publish my web application I get the error: "Web deployment task failed. (Could not generatede

  • Extra fm-ditafile tag is generated in book file after generating FM

    I'm using Adobe FrameMaker 8 in Tech Comm Suite 1 in Windows XP. When we generated our book files from ditamaps, we seem to be getting an extra fm-ditafile tag in each chapter.  We have been unwrapping these extra tags, but then we have to reapply al

  • Formula in BIBW

    I would like to have a report with customer & material in the rows and sales (value) in the columns.  The condition for arriving the sales value is that out of total sales, customer who has reached 70% of the sale value to be appeared first, next 20%