Missing Orders on Client

Hi! everyone
We did applyy SP21. We are working with MAM25 SR5 .
We are missing ORDERS on the client.
We aregetting Notification, equipments, Meas. points and Functional Location.
After We run SE37 for MAM25_001_GETLIST We can see 3 ORDERS but we can not get any on the client.
Could you please give me ideas about how to get orders on the client ?
Thank you for your help

Hi! guys
1. Before we applied the SP21 we did a homogenoues copy from production backend system to quality Backend system.
We did apply SP21 only on Quality environment. As soon as everything works fine we will do that on production.
W did run MAM25_GETDETAIL for those ORDERS that do no go to the Client and are shown by MAM25_and the GETDETAIL works fine I did not see any error.
On Quality envionment we did check the MEREP_LOG and we did not see Error type E, all of them are type I, and some are type W.
Z_MEREP_GEN_T02_____MAM25_090 Begining for the execution number 0000131796 and the time execution is 67
Does not exist data to download from R/3 on the downloader
Downloader finished ok.(ID Mobile: 0000003937, SyncBO: MAM25_090)
Z_MEREP_GEN_T02_____MAM25_090 finished for the execution number 0000131796 and the time execution is 67
Z_MEREP_GEN_S01_____MAM25_001 Begining for the execution number 0000131796 and the time execution is 70
MAM25_001_GETLIST Begining for the execution number 0000131796 and the time execution is 71
MAM25_001_GETLIST finished for the execution number 0000131796 and the time execution is 71
Códe of call return BAPI RFC: No objects were selected
Objects en R/3=0, filter took=0, filter loaded=0
Objects: added=0, modifiied=0, deleted=0, no modified=0
ID móvil=0000003937: Total registers=0, total PT=0, conflicts identified=0
ID móvil=0000003937: Added=0, modified=0, deleted=0
Does not exist data to download from R/3 on the downloader
Downloader finished correct.(ID Mobile: 0000003937, SyncBO: MAM25_001)
Z_MEREP_GEN_S01_____MAM25_001 finished for the execution number 0000131796 and the time execution is 70
With MEREPE_MON We did see the same Type of errors as we saw on the MEREP_LOG
As you can see the MAM25_090 said that it does not have data so,.... I think I should be focus on it. But my questions are:
1. If I did a homogenous copy from production why I have problem with MAM25_090 ?
2. Why are we getting some information on the client Like notifications, Meas. Point, Equipments, Func. Locations ??
Thank you for your cooperation
Xiomara

Similar Messages

Condition type missing in Sales order after client copy

Hi All,
I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
Can anybody experienced the same problem before. If yes. please provide me the solution.
Regards,
Ramesh.

Dear Ramesh,
I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
Please check and revert.
Venugopal

Missing orders in Number Range

Hi Friends,
We are facing an issue in our production systems where once in a while we find some orders missing in the number range provided. We have a custom report which tells us whenever a particular number on a sales document number range is skipped. Usually when this report identifies a missing order we will be able to find some error information from ST22 or SM13 logs and from that we identify the user who was trying to create this order and we contact them to re-enter the order. In most cases they are unaware that there has been an error since they get a success message when they save orders. But in some cases no information is available in these transactions and we are unable to identify who was creating this missing order and Business team fears that we are missing some legitimate orders which the customer thinks was created. I read thorugh lot of messages in the SDN forums and lot of similar issues were due to number range buffering but we do not have number range buffering set in our systems for sales documents. Have any of you faced this issue before and do you have a suggestion to prevent this?
Regards,
Praveen

Hi Praveen,
I remember that the module pool drwas a numer from the number range before the order is actually saved. If the creation process is cancelled, the number has been used.
You could try to check that by setting a break-point at function module NUMBER_GET_NEXT and then manually create an order, play around with the different tabs and views, create and delete items and check when the number is drawn.
If it is drawn as it should be in update task, you may find update fails in the update monitor and the users responsible should have received an express mail.
Regards,
Clemens

Missing orders in extraction from 02

Dear all,
A few weeks ago we re-initialized our setup tables for the 02 application. (block documents).
Today we notice we are missing orders which were created closely after the initialization.
I tried to check the extraction with RSA3, but this also does not return any data. Does anyone have an idea what happened and how we can correct?
thanks,
Tom

Hi Tom,
it sounds like your missed documents were created during your init procedure and not after...but, anyway, what's done is done !
Your records were not collected by a delta and were not included in your setup job...so, you have to check if these records are really BW relevant (from a technical point of view!): run again your setup job and then verify (RSA3) if your records are loaded...
Hope it helps !
Bye,
Roberto

Missing Orders Ids

Hi there,
I have a Table with an Order Id field as
A0301000
A0301011
A0301012
A0307090
A0349870
A0301055
A0306056
and so on.
I need an SQL Query to list out all the missing Order Ids between A0301000 and A0399999 for re-allocation. How's the above possible?

user3308033 wrote:
Hi there,
I have a Table with an Order Id field as
A0301000
A0301011
A0301012
A0307090
A0349870
A0301055
A0306056
and so on.
I need an SQL Query to list out all the missing Order Ids between A0301000 and A0399999 for re-allocation. How's the above possible?select order_id from tableA
minus
select 'A'||level+300999 from dual connect by level <= 10000;
adjust accordingly

In Transaction CC02 Business Work Place icon is missing in some clients

Hi Experts,
The ICON to access Businees Workplace from Change Master Transactions CC02 seem to be missing in some clients .
It is present is some clients and missing in Some clients.
Thanks in Advance
Best Regards,
Gaurav Vijayvargiya

Hi Gaurav,
I remember we had something like this once after an (internal) release change. After next logon or the other day everything was fine again and nobody could reproduce this phenomenon.
So keep cool, wait a week an come back if problem persists.
Regards,
Clemens

I want to retrive data from KNVP table but it shows records in miss order.

Hello all,
I have written following query.
SELECT KPKUNNR KPKUNN2
            INTO corresponding fields of table I_KUNZJ
            FROM KNVP AS KP
            WHERE KP~PARVW = 'ZJ'
              AND KP~KUNN2 = 'C0100'            .
KNVP table having following customers for my condition:-
Kunnr
100510
1150010
1166835
But it shows records in following order:-
Kunnr
1150010
100510
1166835
So it shows 1st record = 1150010 instead of 100510. I want to show 1st record as 100510. Can any one please tell me why it shows such miss order.

customers::Kunnr
100510
1150010
1166835
Actually I want to select 1st record only and insted of 100510 it shows 1150010 kunnr.
SELECT KUNNR KUNN2
            INTO corresponding fields of table I_KUNZJ
            FROM KNVP
            up to 1 rows
            WHERE PARVW = 'ZJ'
              AND KUNN2 = 'C0100'            .
Becoz
In KNVP table customers are in following order:-
Kunnr
100510
1150010
1166835
But after selection it shows records in following order:-
Kunnr
1150010
100510
1166835
Edited by: megha waykar on Jan 11, 2008 8:38 AM

Lync autodiscovery key is missing from our client computers.

Lync autodiscovery key is missing from our client computers, Lync prompts for Exchange credentials but cannot authenticate. What is causing the autodiscovery key not to be created or to be deleted?
Thanks in advance.

Hello guy,
Check it:
Get-WebServicesVirtualDirectory | fl *url*
https://<URL_webservices)/ews/exchange.asmx
https://<smtp_domain>/autodiscover/autodiscover.xml
https://autodiscover.<smtp_domain>/autodiscover/autodiscover.xml
http://AutoDiscover.<smtp_domain> /Autodiscover/Autodiscover.xml
_autodiscover._tcp.<owa_url> (Autodiscover DNS SRV Record) port 443
Internally, point to Exchange Server
“Vote As Helpful” and/or “Mark As Answered” - Thiago Mendes da Silva - MCSE Communication - ITIL v3 Foundation - http://www.ucsteps.com/

Missing orders in SAP-Gap in number assignment

Hi All,
We are facing a situation where there is a gap in assignment of order numbers. We do not have any trace of any failed updates in ST22,SM13 etc. Does this mean that we missed only a "number" and not an order? Is there any other transactions that can give some information on this? Do we have any documentation from SAP that talks of a similar isssue?

<b>This is report I used for FI = RFBNUM00</b>
<b>FYI</b>
OSS note # 62077
Symptom
Gaps (jumps) occur when allocating internal numbers.
The status of the number range does not match the number last assigned.
The number assignment does not match the insert sequence.
Additional key words
Document number, Number range, Number range object, Buffering, Current number level, Trip number assignment, Number interval, CO document, CO actual posting, Inspection lot, Material document, Physical inventory document, Production order number, Planned order number, Process order number, Maintenance order number
FB01 VF01 KO88 KE21 KE11 FD01 FK01 XK01 XDN1 MB01 MB0A MB11 MB1A MB1B MB1C MB31 KANK KB11 KB13 KB14 KB41 KB43 KB44 KB21 KB23 KB24 KB31 KB33 KB34 KB51 KB53 KB54 PR01 PR02 PR03 PR04 PR05 XD01 VD01 MK01 SNUM SM56 SNRO VL01 VL02 CO01 CO40 CO41 VA01 MR1M MIRO
Cause and prerequisites
A large number of number range objects are buffered. When buffering a number range object, numbers are not updated individually in the database, rather, the first time a number is requested, a preset group of numbers are reserved in the database (depending on the number range object) numbers and these are made available to the application server in question. The following numbers can then be taken directly from the application server buffer. If the application server buffer is exhausted, new numbers are generated in the database.
The effects described under "Symptom" then result:
If an application server is shut down, the numbers that were left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.
The status of the number range interval reflects the next free number that was not yet transferred to an application server for intermediate buffering. The current number level does not therefore display the number of the "next" object.
The current number level (per server) can be displayed with Transaction SM56. Start Transaction SM56 and branch into the menu 'Goto' -> 'Entries'. In the dialog box, enter the client, the affected number range object (for example, RK_BELEG) and possibly the required subobject (corresponds to the controlling area for the object RK_BELEG).
If several application servers are used, the chronological insert sequence is not determined by the numerical sequence on the individual hosts, due to the separate buffering on the various servers.
Buffering the number range objects has a positive effect on the performance as no database access (on the number range table NRIV) is required for every posting. Furthermore, a serialization of this table (database blocking) is prevented to a large extent so that posting procedures can be carried out in parallel.
Solution
As the number range buffering does not lose any guaranteed attributes, a correction is not required.
If you still require a continuous allocation, you can deactivate the number range buffering deliberately for individual objects.
Proceed as follows:
- Start transaction SNRO and enter the affected object
- Press the 'Change' pushbutton
- Deactivate buffering: Menu 'Edit' -> 'Set buffering' -> 'No   buffering'
- If you only want to change the buffer size, please enter the   corresponding value in the field 'No. of numbers in buffer'
- Save the changes
Please note that this change is a modification. The modification is overwritten as soon as the affected number range object is redelivered - that is, you must check the change manually after every import of a maintenance level.
For the the following number range objects, gaps may cause user insecurity as a sequential numbering is 'expected':
Area CO:
- RK_BELEG   (CO Document)
Caution: Note that the problems described in notes 20965 and 29030 can occur if you deactivate the buffering.
- COPA_IST   (Document number during actual posting)
- COPA_PLAN (Document number with planned posting)
- COPA_OBJ   (Business segment number)
Area FI:
- DEBITOR    (Customer master data)
- KREDITOR   (Vendor master record data)
Area HR:
- RP_REINR   (Trip numbers)
Area PM, PP, PS
- AUFTRAG    (Order number, Production, Process, Maintenance order
number, network number.)
- QMEL_NR    (Number range message)
Area MM:
- MATBELEG   (Material documents)
- MATERIALNR (Material master)
Area QM:
- QLOSE      (Inspection lots in QM)
- QMEL_NR    (Number range message)
- QMERK      (Completion confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Completion confirmation number of an inspection
             characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Control chart)
Area Workflow:
- EDIDOC     (IDocs)
Number range buffering can be activated or deactivated at any time.
Number range objects that must be continuous due to legal specifications (for example RF_BELEG, RV_BELEG), or due to a corresponding application logic must not be buffered with the buffering type 'Main memory buffering'. Please see also notes 37844 (for RF_BELEG) and 23835 (for RV_BELEG).
Source code corrections
Thanks
SK

Build issue regarding missing Oracle.DataAccess.Client.dll ... where is it

I'm building a new .sln file and it gave me an error in a file that referenced the following:
<Schema Namespace="Model.Store" Alias="Self" Provider="Oracle.DataAccess.Client" ProviderManifestToken="11.2" xmlns:store="http://schemas.microsoft.com/ado/2007/12/edm/EntityStoreSchemaGenerator" xmlns="http://schemas.microsoft.com/ado/2009/02/edm/ssdl">
It seemed to be complaining that it could not fine the assembly associated with the provider. I installed the Oracle Data Provider installation package and rebuilt and it was working fine. What I wanted to know is where is this assembly. I cannot locate it on my laptop. I did see a reference regarding "Configuration File Support and Search Order for Unmanaged DLLs". It stated:
The Oracle.DataAccess.dll searches for dependent unmanaged DLLs (such as Oracle Client) based on the following order:
1.     Directory of the application or executable.
2.     DllPath setting specified by application config or web.config.
3.     DllPath setting specified by machine.config.
4.     DllPath setting specified by the Windows Registry.
HKEY_LOCAL_ MACHINE\Software\Oracle\ODP.NET\version\DllPath
5.     Directories specified by the Windows PATH environment variable.
I did see where the installation package modified the machine..config file. Can somebody tell me how the reference tot eh "missing" assembly is resolved?
Thanks, Eric

Oracle.DataAccess.dll is usually in the ODP.NET\bin folder of your Oracle installation. There's one for .net 2 and another for .net 4.

Key mapping missing - MDM5.5 client

Hi
I have successfully imported Materials, when see the same in the client ( right click the material and edit key mapping ) key mapping field is missing . Kindly clarify me what could be the reason for the same.
thanks
Alexander

Hi Alexander,
Just add to Ravi's detailed explanation, make sure that you chose the display fields accurately. For every one of your tables, figure out what field(s) make the record unique, and flag them as display fields. Make sure that key mapping is turned on, per the instructions.
Truncate the data you already loaded, and reload the data. While reloading the data using import manager, there are a couple of things you need to take care:
a) if you have one field as display field, then clone the source field data, map the original field to remote key on the destination pane, and map the clone to the field.
b) if you have 2 fields as display fields, either use partitioning or compund key option, and map the composite key to the remote key.
Hope this is helpful. All the best!

Creating credit memo request - V1 498 / missing order quantity

Hi Experts,
could any of You pls help me with a credit memo creation issue?
I credit memo needed to be created based on invoice, so configuration and copy control is done as usual, but I have a failure during CR order creation referring to an invoice F2.
I got an error message: V1 498 - Credit already exist for item... - and no qty is transferred to new document
I have gone thought the threads on Forum, but none of the suggested solution was appropriate to solve the issue:
- the document flow is updated in copy control ,
- I can no remove the schedule line flag at VOV7 - the order qty will be missed but target qty is used, and end up incompletition (VU 019 error messge), so billing is faile
- completition control set as B at VOV7,
Still have the problem
Could any of You pls help me - answers will be appreciated.

V1 498 - Credit already exist for item...
What the above message means is that lines items have already been used as reference for the creation of credit memo request(s).
Create a new sales order, delivery and billing document. Then create credit memo request with reference to this new billing document and test.
In VTAF copy control, at item level, field "Pos./neg. quantity" dictates how the quantity in the source document is affected by copy control.
PS - I tried to create credit memo with reference to billing document (F2), there were no issues there. Therefore I am taking that the issue is with credit memo request (copied with ref to billing document F2)

Error in Sales order, missing order reason

Hi All,
We are trying to create a sales order in the CRM Mobile Client and we see the following error.
mandatory check failed for order reason(reason for business transaction) of the business object sales transaction.
Any ideas on how to resolve the issue.

Hi,
I am not sure whether this is standard behaviour.
Did you make any settings for order reason in MSY -> Sales Transaction Settings -> Field Property Maintenance ?
Regards,
Wolfhard

Problems while creating local service order on client in MAM

I have MAM2.5 on PC. I have created a local notification and synced it. based on that notif , I am trying to create a service order.But after Sync , I get following error in monitor (merep_mon on MI server) under MAM_001:
Return code from RFC BAPI Wrapper call:Business area required (Please enter)
Return code from RFC BAPI Wrapper call:Service/maintenance order type PM02 not completelymaintained in plant 4510
Return code from RFC BAPI Wrapper call:Business area required (Please enter)
While creating service order on backend , we have to fill in the business area. but I dont see any such option on client. may be it picks up the business area from some other detail ( like equipment / personnal number ) ..If so , which from where does it pick that?
Regards
Rucha Atre

Hi,
You may try this option which might allow you to create orders without business area in the client;
In the back-end, Goto,
SPRO>Plant Maint. & customer service>maintenance & service orders>Define field selection for order header data.
Uncheck the business area from required field.
If it still doesnt work, goto tcode KOT2_OPA and click on change field selection and then remove the required check from business area.
Regards
Boby
Regards.

Appenforce.log is missing on all clients

SCCM 2012 (no SP1 or R2)
I'm not having much trouble deploying applications, but there are occasional instances when I need to troubleshoot a deployment.
I seem to be missing appenforce.log and some of the other essential log files needed to troubleshoot application deployment issues.
I've checked several clients and they are not on any machines.
Those don't have to be "turned on" to be created, do they? Aren't they normally auto created?
Any idea how to get those log files created and popluated?
TIA!
Jerry

That log will get created when the client first attempts to install an application. Until then, the log will not exist. So if it does not, that implies that the client has not tried to install any application.
Have you verified that the policy has been received at the client? Was it available or required? Then has the user tried to launch the app (assuming it is available) either through Software Center (for computer targeted apps) or Application Catalog (for
user targeted apps)?
Lots of things to check, but that would be where I'd start. If any app stuff has been tried on the client, then you should have AppDiscovery.log and AppEvalIntent.log as well to look at. It could be that the app was detected as not relevant/applicable to
the client based on detection methods or requirement rules.
Wally Mead

Missing Orders on Client

Similar Messages

Maybe you are looking for