Missing, out of order, corrupt

1. Five files (all either virtual copies, or parents of virtual copies) will not sort properly. The date information is correct. But when I sort my entire library (54,000 images) by Capture Time those five appear in the first five slots. They were captured in 2007, and are in front of images two years older.
2. According to Lightroom, 10 files are "Missing." But they are on the hard drive, and when I ask LR to "Show in Finder" it locates them.
3. One lone file is corrupt. When I scroll past it, it will appear in the Gallery briefly, then *poof* it's gone. I can't select it to rebuild the preview. I can't select it to delete it and re-import. I've opened the file with PS CS3; no problems.
I've optimized my Library several times.
Anyone know of a way to fix these apparent database issues?

>2. According to Lightroom, 10 files are "Missing." But they are on the hard drive, and when I ask LR to "Show in Finder" it locates them
If they are listed as missing in the Library, try a reimport and if Lightroom tells you that they are already in Library, then just delete the "Missing files";
(I do not have any "Missing files" in my Library at the moment but that is how I remember solving the missing files that were not really missing. It is a database problem and it can be corrected by right-clicking and choosing Delete. (but in case I am wrong, make sure you copy your .lrcat file to another location first, so you can get it back in case .......))
> 3. One lone file is corrupt.
Find it in your backup and restore it.

Similar Messages

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired. I tried

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
Everything is backed-up.

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

Have i miss out on loads in order to get back at LP9?

Since i last left doing music like Three and a half years ago moving back to Jamaica in getting my career off the ground, so far it has been mayhem however i am still hanging in there, bless all you L.P. genius.
Bee Jay, Jim, steve, john, Noepqlease and of course Ischartz Jord and to all whom help over the years of Blay-Zay development with L.P.
I miss not being here in the forum like for real though.
On the real, have i miss out on loads in L.P. or updates as i just started to update my system today, so are there any updates that has been at fault in looking for?
And any major changes to look for?

welcome back mon!
Logic 9 has not evolved beyond all recognition, but there have been some important 'under the hood' improvements. I too have had to cater to different needs for the past few years, so my logic knowhow is maybe not as cutting edge (if it ever was :p).
As far as I am concerned, one of the major improvements is the FLEX audio feature.
I suggest viewing the short videos featured on the following page.
http://www.apple.com/logicstudio/whats-new/
They will get you up to speed!

Missing Package(s), Installation Corrupted

Un Gusto saludarlos.
Queria pedir su colaboracion,
Descarge las Imagenes de VMware y tengo la licencia DEMO de DMS 5.3, instale dichas maquinas virtuales y no se genero ningun inconveniente, el DMM y en SnS, mas sin embargo al levantar dichas maquinas virtuales se me muestra el siguiente error: "
Missing Package(s), Installation Corrupted, algun concejo que me puedan brindar, intente instalarlo nuevamente en repetidas ocaciones y siempre obtengo el mismo resultado.
De antemano agradezco muchisimo su ayuda.
Exitos y bendiciones.}
Saludos.....
Adjunto imagen de error

Hello jbtb07,
Welcome to the forum! After almost two months of trying to sort out an order issue, I can understand why you would be fairly fed up with dealing with this issue. I am sorry to hear that you may not have ever received the headphones, and that you are still trying to find a resolution to this.
Using the email address you registered with your forum, I was able to locate the order. It appears that a resolution was provided to you, and so I am sending you a private message with further details. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Data written to socket getting lost? or perhaps out of order?

I'm trying to fix a bug in Flashmog. The bug is described in more detail here.
Basically what is happening is that my Flash client claims that it is calling functions that don't arrive at the server -- or they arrive, but the socket data is out of order and therefore is garbled. I've stared at the source code for hours and tried a lot of trial-and-error type stuff and added trace statements to see if I can find the problem and I'm not having any luck.
In particular, there's class I have called RPCSocket that extends the AS3 Socket class so I can serialize data structures before sending them across a socket. At one point, this RPCSocket class calls super.writeBytes and super.Flush. It is the point at which I send all data out of my client. The data is binary data in AMF3 format.
          public function executeRPC(serviceName:String, methodName:String, methodParams:Array):void {
               if (!this.connected) {
                    log.write('RPCSocket.executeRPC failed. ' + methodName + ' attempted on service ' + serviceName + ' while not connected', Log.HIGH);
                    throw new Error('RPCSocket.executeRPC failed. ' + methodName + ' attempted on service ' + serviceName + ' while not connected.');
                    return;
               var rpc:Array = new Array();
               rpc[0] = serviceName;
               rpc[1] = methodName;
               rpc[2] = methodParams;
               var serializedRPC:ByteArray = serialize(rpc);
               if (!serializedRPC) {
                    log.write('RPCSocket.executeRPC failed. Serialization failed for method ' + methodName + ' on service ' + serviceName, Log.HIGH);
                    dispatchEvent(new IOErrorEvent(IOErrorEvent.IO_ERROR, false, false, 'RPCSocket.executeRPC failed. Serialization failed for method ' + methodName + ' on service ' + serviceName));
               super.writeUnsignedInt(serializedRPC.length);
               super.writeBytes(serializedRPC);
               super.flush();
          } // executeRPC
Can someone recommend a way for me to store without corruption, conversion, or filtering or translation of any kind *all* of the information sent across this socket? I'd like to write it to a file. I'm guessing that keep a global ByteArray var and storing the info there might work, but I'm wondering how I might get the contents of that ByteArray into a file so I can inspect it.
Also, I'm wondering if I might be able to inspect what flash actually sends out on the socket? I have a sneaking suspicion that data I supply to super.writeBytes may be sent out of order or may not actually get sent across the socket. This bug I'm talking about only seems to happen under high-stress situations when I'm sending dozens of messages per second across this one socket.

oops...forgot link to bug description: http://flashmog.net/community/viewtopic.php?f=5&t=549

Macintosh HD can't be mounted, keys out of order and repairing can't be completed

Hi,
English isn't my mother tongue so I'll make my best to be understood.
I have a Macbook Pro from 2012, running on Yosemite (latest version). I installed Onyx which told me my disk needed to be verified and repaired. Following this advice, I restarted my computer with Disk Utility and completed a verifying and repairing. Which led to a terrible outcome. Since then, everytime I boot with my user on my Mac, my computer shuts down in the middle of the progress bar. I tried to find an explanation to it and fix it, so I tried the following things:
1) I booted with CMD + R to go into Disk Utility
2) I runned a verify Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error
3) I unlocked "Macintosh HD" Mounted encrypted partition and runned a verify disk, which says :
"Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
File system check exit code is 8.
Error : the disk needs to be repaired, Repair disk."
4) Unfortunately, the "repair disk" button is grayed.
5) So I runned repair Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error.
6) I tried to boot my computer again but it still shuts down when trying to open my user.
7) Did all the same process again, but now the error is "Keys length incorrect" and repairing is now always blocked in the middle of the progress bar.
Is there any way I could extract the data I care about (photos, etc.) before erasing the disk or buying a new one?

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

Keys out of order?

i think this is a command line question. i recently unplugged my B&W G3 so i could use the space to play with my new (to me) G4. i also "borrowed" some RAM from the G3 to install in the new machine. when i tried to hook up the G3 again, it would not load anything. i did the usual 'zap' and 'option' dance, which did finally bring the beast to life, but it would go to black screen where i would get "root". i know very little about Mac OS command line, so i didn't try to do anything there. i would type 'exit' which would give me a run down of the start-up POST and end in a "panic, stops here" line [sorry, not the exact term, but your get the idea].
so i put in the OS install disk (OS 10.4) and run the first aid utility to see whats up. i get a red line that reads "Keys out of order, needs repaired". what does that mean? i ended up erasing the hard drive and am now reinstalling the OS, but was wondering what mistake i may have made to crash the system in the first place.
Message was edited by: rtabish

The "keys out of order" message indicates your hard drive has file directory corruption. Disk Utility can't fix, but usually DiskWarrior can. I don't think the RAM removel/reinstall could have cauised this problem.
Besides using DiskWarrior, the only other option is to erase & reinstall the system which you have done.
 Cheers, Tom

Songs out of order?

I recently imported several CDs to my iTunes library, and for some reason, some of the songs are appearing out of order. I have read the discussions regarding this on the message board (probably not all, but four or so?), and it doesn't seem to be the same reason everyone else is encountering. A few notes detail the problem:
- There's one album where the track list is: 10, 1, 2, 3, 4, 5, ... 9, 11, 12 (in order except Track 10), and a few others with the same issue (albiet different track number out of order)
- The album in question is only by one artist. I have group-changed the artist, album and album artist fields to the same value for all tracks. So it's not a guest-artist issue.
- I have marked the album as a compilation, to no effect. This worked great on many multi-artist albums, but didn't help here.
- All tracks of the CD are marked as being within one CD (there isn't the horizontal line that desigates different albums).
- The tracks appear in order when I sort by Artist; however, this breaks up the compilations elsewhere in the library, so I really want to use Album by Artist.
- Changing the view format to adjust options did not help either, and this seems strange enough that I'm surprised it helped for someone else in the past.
- Closing and reloading iTunes also had no effect.
Any thoughts on how to make them appear in order in the Album by Artist view?

maybe i missed something here. But heres my $0.02
you cannot change the order in the library it is true, except by sort.
you can change the order in playlists by simple drag 'n' drop.
So if this makes sense to you then you can ignore the order in the library (no more reimporting). You can then just set up a playlist and order them by column sort OR just drag and drop them into the order you want.
hope that helps

Out of order songs

I don't know how this is happening, but some songs on a few albums have gone out of order. This has been going on since I got the new iTunes. When I bring up iTunes it shows that all the songs are in the right order, but when I unplug it and play it It shows some songs are out of order. It's really annoying when you just want to hear an album all the way through, and the intro song is now song three.
I have a 60gig Video iPod, can anyone help me?

maybe i missed something here. But heres my $0.02
you cannot change the order in the library it is true, except by sort.
you can change the order in playlists by simple drag 'n' drop.
So if this makes sense to you then you can ignore the order in the library (no more reimporting). You can then just set up a playlist and order them by column sort OR just drag and drop them into the order you want.
hope that helps

Songs displaying out of order in new iTunes

Despite proper track numbers on all the songs, tracks still display out of order when viewing them. Here is an album where the proper track numbers are showing but each song is in a completely random order. Note that shuffle is not enabled.
I've attempted to fix this by adjusting settings in the View menu and clicking and dragging. Nothing helps.
Any tips would be very much appriciated.

Hey Kilima,
THANK YOU! The problem was that some of the songs were labeled as "Album 1 of 1" while other songs had this information completely missing. This didn't affect the track listings in the old iTunes, but got distorted when I upgraded.
Thanks again!
Dann

Why are my Smart playlists out of order in iOS 5?

Since upgrading to iOS 5 on an iPad and iPhone 4 (Verizon), many (not all) of my smart playlists made in iTunes are out of order in both my iPad and iPhone (meaning the songs within the lists are our of order not the lists themselves). Somtimes the playlists vary even between my iPad and iPhone, not just with iTunes.
I tried a couple of workarounds I found on the web:
1) I've unchecked Live Updating on my affected Smart playlists, but it only seemed to work on some of them.
2) Resorting the Smart playlists in iTunes by a different order, like Album, Name, or Artists seemed to work for others.
Still, some of the smart playlists on my iPad and iPhone have resisted even these solutions and stubornly will not sort to the order I have them in iTunes.
My iPad has now more smart playlists synced correctly than my iPhone, yet, i have the same sync settings for both of them. I've been trying to find the rhyme or reason behind the mangled sort order but haven't a clue. Anyone else experiencing such strange behavior with smart playlists since upgrading to iOS 5? Is this a bug or just some setting I am missing?

Created a similar post about 1 month ago - with no response...its driving me crazy too! Would love a fix!

Albums out of order and duplicated after using Match

I finished Matching all of my tracks, and endbled iTunes Match on my Desktop, Laptop, and iPhone. My Mac laptop (where I originally enabled and purchased Match) shows my library as I want it-- everything in order correctly and all of the correct album art.
My desktop shows everything almost correctly. There are a few albums split into multiple (sometimes 7-10) parts, and album art is missing.
My iPhone (which has no local stored music right now) shows everything almost correctly. Some of the split albums that showed incorrectly on the desktop are in 2 parts instead of 10. Plus, some of the albums are completely out of order and duplicated in the album list view. I attached a screenshot below.
The "duplicated" albums seem to be alphabetically wrong because one of the tracks (When Love Takes Over, David Guetta) starts with a W. The problem is, the album for that track IS correctly set, and the artist and album artist are both David Guetta. Changing the album (which displays correctly in iTunes on my Mac, and even on my Windows Desktop) to a complilation does nothing.
How can I fix this?
(P.S. I have an iPhone 4S, Macbook Pro, and Windows desktop, all running the latest iTunes. I have only 293 songs, so I do not have a large library)

I ended up fixing my issue. The problem was the fact that some of the songs in an album were marked as part of a compilation, but some were not. iTunes seems to be less strict about grouping things in albums, so I never really noticed it.
However, this, combined with the fact that I could not update the metadata after the song is added to iCloud resulted in me changing the metadata on the computer, only to have it reset when I updated Match. I solved the problem by deleted everything from iCloud and rematching it, but only after I had corrected the compilation issue.
So, if you are havng the same issue, delete and readd everything to iCloud. I deleted everything from a second PC (that had no locally stored files) and then rematched from my laptop (where iTunes asked whether I wanted to add to iCloud, keep the song, or delete it. Choose "Add to iCloud" to rematch).

Weird "keys out of order" problem

So, keys out of order was new to me, but I've read up about possible fixes... My situation seems strange, here's why...
I was working on my dual 1.8 G5, 10.4.11, clicked on a video link, then got the greyed out screen, and the multilingual restart message.
So, I did several restarts, but the fans would go to full, and it would shut down before showing any activity on screen. So I entered single user mode, and typed the command for checking the disk (thankfully I could get info from the web on my macbook). That's when the 'keys out of order' message was first seen. After reading up I tried to run the fsck thing, which I read could be an option. I got an 'unable to repair' message. Then I put my workmates machine into target disk mode and started from that disk and tried to run disk utility over my startup disk, of course it didn't work, with several warnings in read about keys out of order etc.
So I'm learning that DiskWarior is probably my best bet, but in the meantime I put my machine in target disk mode, and using a handy hint I found online, dsragged out my g3 iMac, booted it into OS9, extensions off. Connected by firewire, my G5 HD showed up and I was able to drag off some recent files, Mail folder etc. (At this point let me say I did a system back to a DMG file on a separate partition of an external USB drive several months ago, and that maybe 99% of my work and important files are on another external drive, so it's not life and death here.)
NOW... comes the strange part. I go back to my machine, and just for a lark try to start it up again.... and it starts up fine, no problems, everything normal. Wow I think, I'll go and run disk utility over it now, so I restart using my friends powermac, and run said program, and get exactly the same errors, keys out of order. hmmm.
So I go back to my machine, restart using its own system, all good, all fine. So I plug in another external HD and do a clone of the internal drive while its all working fine.
So, since then its been running fine, (about a day and a half). But what should I do, and what's going on? Should I reformat my drive and out the earlier cloned system on it? Would the recent system clone I did likely be corrupt? Does it seem right that my system should work OK now, when Disk Utility was still reporting keys out of order? Should I pony up and buy DiskWarrior? (can't really afford to to be honest)
I'm a bit flummoxed, thanks for any help...

Hi, weird but not completely inexplicable.
Indeed Disk Warrior is your best bet, IMHO every Mac oener should have it.
I wouldn't completely trust any clone/backup once you get that error.
Generally the only real fix for that error is DW, or Zeroing your drive & reinstalling.
http://supportdb.alsoft.com:591/FMPro?-db=alsoftsupport&-lay=main&-max=15&-forma t=AlsoftSupport-qa.html&-script=counter&-token=182&-Skip=101&-find

Cover flow on IPod Classic is out of order

The cover flow on my Classic is out of order, not alphabetical by artirst. Most of the albums are in order, but there is about a dozen that are after "Z" (for example Cream. Should be in the C section, where it is in ITunes. Any ideas?

Never hurts to reset the device just in case that helps.
Confirm that the Sort Artist fields for the affected tracks are actually empty instead of containing one or more invisible spaces. Note that iTunes groups on Album Artist (order amended by Sort Album Artist) whereas the iPod Classic groups on Artist (order amended by Sort Artist).
See the section Missing or Artist or Album not with others by same artist which explains that enabling one or both of Settings > Main Menu > Compilations or Settings > Music Menu > Compilations can affect where tracks appear in cover flow.
The iTunes Store tends to mark albums that include any featured artists, or form an anthology of an artist's work, as part of a compilation to mitigate some of iTunes historically poor track grouping issues. Depending on your preferences within iTunes this flag may not have any noticable effect in iTunes, but may control what happens on the device.
Even though you can't see where the problem lies it may help to amend the track details in the way I describe at Tried that, there are STILL too many covers and then resync the device.
tt2

The Cover Flow on my iPod classic is out of order

I use the cover flow option on my iPod classic to get to the music I want to listen to and discovered that my albums are out of order in regards of being alphabetical order by artists. For example the greatest hits and soundtracks and other compilations are moved to the back instead of being in order with the artist that made the album. Is there anyone that can help me resolve this issue?

See my previous post on Grouping Tracks Into Albums, in particular the topic Missing Artist or Album not with others by same artist.
tt2

Missing, out of order, corrupt

Similar Messages

Maybe you are looking for