Missing parameters

Hi everyone,
I have a little big problem that I am hoping you can all help me with. I am updating a RFC in XI. I have imported the function module into XI with the correct parameters, added the mapping to include the additional parameters. I have activated my change list. After all has been said and done, we have stopped and started SAP on our XI box and when we are still getting the old parameters being passed back and forth. The sender has updated their fields and are sending us what we expect, but the receiver does not seem to have noticed the change. I have copies of the XML below.
- <ns0:ZBD_IVR_PAYMENT_SPEEDPAY xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<CCEXP></CCEXP>
<CCNUM></CCNUM>
<GROUP_NUM></GROUP_NUM>
<PAYMENT_AMOUNT></PAYMENT_AMOUNT>
<PAYMENT_ID></PAYMENT_ID>
<PROCESS_DATE></PROCESS_DATE>
<PROCESS_TIME></PROCESS_TIME>
<VKONT></VKONT>
</ns0:ZBD_IVR_PAYMENT_SPEEDPAY>
Here is the imported function module
ZBD_IVR_PAYMENT_SPEEDPAY
BANK ACCOUNT
CCEXP
CCNUM
GROUP_NUM
PAYMENT_AMOUNT
PAYMENT_ID
PAYMENT_TYPE
PROCESS_DATE
PROCESS_TIME
ROUTING
VKONT
Here is the XML being sent to us by the sender.
<PAYMENT_ID>60845</PAYMENT_ID>
<CONTRACT_ACCOUNT>CONTRACT_ACCOUNT>
<GROUP_NUMBER></GROUP_NUMBER>
<PAYMENT_AMOUNT></PAYMENT_AMOUNT>
<PROCESS_DATE></PROCESS_DATE>
<PROCESS_TIME></PROCESS_TIME>
<EXPIRATION_DATE></EXPIRATION_DATE>
<ROUTING_NUM />
<BANK_ACCOUNT />
<CREDIT_ACCOUNT>CREDIT_ACCOUNT>
<PAYMENT_TYPE></PAYMENT_TYPE>
<VKONT></VKONT>
</ns0:>
Again, I have mapped everything and all the field names seem to be correct. I have tested the mapping and that works. Any help anybody can give me would be greatly appreciated! Thank you in advance.
Shane Jones

Hi,
I think Cache is not refreshed in the adapter level
1) Refresh the Adapter Cache. go to IntegratioN builder->Administration->Cache Overview ( Refresh Adapter Metadata etc do all refreshes)
2) or In the directory , change the Interface Determination, Receiver RFC communication channel and Receiver Agrrement and activate it .
3) Or Restart the RFC adapter from the Visual Admin
Hope this helps,
Regards,
Moorthy

Similar Messages

[svn:cairngorm3:] 16142: Insync Refactorings, Module lib: Added missing parameters from IModuleInfo interface.

Revision: 16142
Revision: 16142
Author:   [email protected]
Date:     2010-05-16 14:21:40 -0700 (Sun, 16 May 2010)
Log Message:
Insync Refactorings, Module lib: Added missing parameters from IModuleInfo interface. Maven: Take Persistence out.
Modified Paths:
    cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleInfo.as
    cairngorm3/trunk/libraries/ModuleTest/.actionScriptProperties
    cairngorm3/trunk/libraries/lib-parent/pom.xml
    cairngorm3/trunk/samples/insync/insync-basic/src/InsyncContext.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RefreshSearchAfterSav eController.as
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactList.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactsNavigator.mx ml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/PictureInput.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/Toolbar.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ToolbarPM.as
    cairngorm3/trunk/samples/insync/insync-basic/test/insync/application/RefreshSearchAfterSa veControllerTest.as
    cairngorm3/trunk/samples/insync/insync-basic/test/insync/presentation/ToolbarPMTest.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/appli cation/RefreshSearchAfterSaveController.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/prese ntation/ContactFormPM.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/prese ntation/PictureInput.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/test/insync/contacts/appl ication/RefreshSearchAfterSaveControllerTest.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesModule.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesModuleRig.mxm l
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesRigContext.mx ml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule .mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule Rig.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule RigContext.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/application/Compo seMessageController.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Cont entViewStack.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Tool bar.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Tool barPM.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/test/insync/presentation/Too lbarPMTest.as

Kadmin: Missing parameters in krb5.conf required for kadmin client while in

Hi all
When i am going to run commands like
kadmin addprinc -randkey
kadmin ktadd -k
i am receiving kadmin: Missing parameters in krb5.conf required for kadmin client while ininitializing kadmin interface
any ideas??
What kind of parameters are missing???
thanks a lot

Hi,
It is a common problem. I used Oracle Linux to sort it out.
Perhaps you're using the wrong command? AFAIK kadmin should be used when working remotely. You don't say where you are in relation to the server? If sitting at the server you should be using kadmin.local. For example if I issue:
sudo kadmin.local
I get:
Authenticating as principal root/admin@LKDC:SHA1.EB237F611F07B2E8A636804052E8F7252BBA978F with password
If I issue:
sudo kadmin
I get:
Authenticating as principal root/admin@LKDC:SHA1.EB237F611F07B2E8A636804052E8F7252BBA978F with password
If I issue:
sudo kadmin
I get:
Authenticating as principal root/[email protected] with password.
kadmin: Missing parameters in krb5.conf required for kadmin client while initializing kadmin interface
A vital difference. Issuing:
sudo kadmin.local -q list_prinicpals
show show successfully kerberized users, services & hosts. Changing it to kadmin -q list_principals shows nothing except the error message. The above examples are for a client machine.
If you have any questions, ask.
Kirill Babeyev

SharePoint 2013 Powerpivot Add-in Install Configuration - Missing Parameters

Please verify below screen, it is missing two parameters as per the technet article -
Missing Parameters:
Passphrase: Enter a passphrase. If you are creating
a new SharePoint farm, the passphrase is used whenever you add a server or application to the SharePoint farm. If the farm already exists, enter the passphrase that allows you to add a server application to the farm.
PowerPivot Server for Excel Services: Type the name
of an Analysis Services SharePoint mode server. In a single-server deployment, it is the same as the database server. [ServerName]\powerpivot
Technet Article:
http://technet.microsoft.com/en-us/library/jj682085.aspx
I have downloaded add-in from
http://www.microsoft.com/en-us/download/details.aspx?id=35577 and installed it
Then ran the powerpivot
Not sure what I am missing. Could you please help?

I am not sure what was missing so I uninstalled everything SharePoint and SQL instances.
I followed below procedure and it worked. I am listing down the steps for your benefit and verification:
1. SQL Server Suite Installation
On "SQL Server Installation Center",
click "Installation > New SQL Server stand-alone installation or add features to an existing installation".
Refer to the image for selected features:
2. Power Pivot Feature Installation on SQL Server:
Setup role "SQL Server PowerPivot for SharePoint"
I followed
3. SharePoint Installation:
a. Install ADOMD.NET
SQL Server 2008 R2 Analysis Services ADOMD.NET
http://www.microsoft.com/en-us/download/details.aspx?id=30440
b. Pre-requisites installation
c. Install using "Complete - User for Production environments." Option
here you provide a phrase and make a note of it for powerpivot
d. Now Install PowerPivot
4. Configure Service Applications:
Refer to the link where I published the document I prepared
https://docs.google.com/document/d/1wmlTVh6cM1vv6qKmQnjnOGTMMhY0P-6j9cXc2_sxZMg/pub
If you still have issues let me know i will see if i am helpful-
<o:p></o:p>

Missing Parameters when using .PrintToPrinter or .ExportToDisk

I am creating a viewer that will set login information and allow the users to view, print or export reports. VB.NET 2010 WinForms Crystal Engine 13.0.9.1312. All reports are external designed by various programmers.
The preview mode of my viewer is now working quite well (with the help of Don and Ludek most recently). Anything I want to see on screen works great in the regular Crystal viewer.
The problem is when I want to export to pdf or print to a printer without viewing on screen in the regular Crystal viewer.
If there are no parameters in the reports, both exporting to pdf and printing to any printer selected works.
When there is one or more parameters, it crashes and points to the line
crReport.ExportToDisk(ExportFormatType.PortableDocFormat, strFile)
or
crReport.PrintToPrinter(1, True, 0, 0)
with the message Missing Parameter Values.
Through some searching (and yes I have checked on this site and Google for "Missing Parameter Values") I have found one big issue is that parameter values have to be set after the .ReportSource is set. So before I changed my code, I never saw the Crystal Parameter prompt screen. Now I see it but still get the crash (though once I have had it go to printer honouring the Parameter in a report, but I can't always reproduce it and never when sending to pdf).
The reports may be designed by end users who are using my program. I will not know what reports they are or if they have even put in parameters. I will not know if they are date, string, number, discrete, range, multiple, etc.
The original login code referred to below can be found here.
         'original login code here down to subreport login
         'rest of subroutine is just a Catch and End Try
         crViewer.ReportSource = Nothing
         crViewer.ReportSource = crReport
         'check if to be sent direct to printer and send all pages
         If Not autoforms Is Nothing AndAlso autoforms.ToPrinter Then
            crReport.PrintOptions.PrinterName = autoforms.Printer
            crReport.PrintToPrinter(1, True, 0, 0)   '-> Error Triggers Here
         End If
         'setup viewer options
         Dim intExportFormatFlags As Integer
         intExportFormatFlags = ViewerExportFormats.PdfFormat Or
                                 ViewerExportFormats.ExcelFormat Or
                                 ViewerExportFormats.ExcelRecordFormat Or
                                 ViewerExportFormats.XLSXFormat Or
                                 ViewerExportFormats.CsvFormat
         crViewer.AllowedExportFormats = intExportFormatFlags
         crViewer.ShowLogo = False
         crViewer.ToolPanelView = ToolPanelViewType.GroupTree
         'check if to be sent direct to pdf and send all pages
         If Not autoforms Is Nothing AndAlso autoforms.ToPDF Then
            Dim strPDFFilename As String = autoforms.PDFPath & "\" & autoforms.ReportName & "_" & autoforms.ReportType & ".pdf"
            'strPDFFilename = Replace(strPDFFilename, " ", "_")
            SendExport(strPDFFilename, "PDF")
         End If
         'if not preview then close form
         If Not autoforms Is Nothing AndAlso Not autoforms.Preview Then
            Me.Close()
            Exit Sub
         End If
Private Sub SendExport(ByVal strFile As String, ByVal strExportFormat As String)
      'pass current parameter values to the pdf
      Dim crParamFieldDefs As ParameterFieldDefinitions
      Dim crParamFieldDef As ParameterFieldDefinition
      Dim crParamValues As New ParameterValues
      Dim x As Integer = crViewer.ParameterFieldInfo.Count
      crParamFieldDefs = crReport.DataDefinition.ParameterFields
      'loop through each parameter and assign it the current values
      For Each crParamFieldDef In crParamFieldDefs
         crParamValues = crParamFieldDef.CurrentValues
         crParamFieldDef.ApplyCurrentValues(crParamValues)
      Next
      Select Case strExportFormat
         Case Is = "PDF"
            crReport.ExportToDisk(ExportFormatType.PortableDocFormat, strFile) '--> Error Triggers Here
         Case Is = "xls"
            crReport.ExportToDisk(ExportFormatType.Excel, strFile)
         Case Is = "xlsx"
            crReport.ExportToDisk(ExportFormatType.ExcelWorkbook, strFile)
      End Select
End Sub
This code doesn't work on my system, but my logic is as follows (as flawed as it is). Look through the parameters, find the current values and then assign them to the parameters again just before export.
With the code above, I am getting the enter parameter values screen in the viewer. Therefore, my assumption is that the report now has a current value(s) for the parameter(s). The loop will not require the program to know how may parameters there are or what the values or value types are.
There are a couple of problems with this. When I step through it, there are no current values, because the prompt doesn't come up with stepping through the code with F8. Second problem is that it is finding the internal parameters used for subreport linking ({?PM-xxxxx}). Third problem is that a lot of code I have looked at does not appear like it is assigning the reportsource to a viewer at all just to export or print to printer. So is it necessary to do as I have done here?
I am sorry this is so long and I appreciate anyone who has stuck to it this long. I am at my wits end trying to figure out how to make this work. I think there is a timing issue here but do not know how to resolve it. I just want the report to trigger the prompts if there are parameters, then send the report screen, to pdf or to printer depending on the user's settings for the report (it may be any or all three options). If you need more info, let me know.
TIA, rasinc

Hi
I'd like to look at this from the "how parameters" work point of view. Then let's see if we can drill in on some of the details.
The parameter prompt screen is driven by the viewer. E,g.; the screen will only be spawned on invocation of the viewer. If the viewer is not invoked (e.g.; direct print / export) the parameter prompt screen will not be displayed. Now, in your second post you say:
With the code above, I am getting the enter parameter values screen in the viewer.
This does not sound correct based on the above. E.g.; if the correct parameters are passed to the engine, the viewer should never be popping up the parameter screen. So to me it looks like the code for the parameter is not actually working. It looks like it is as there is no error as such. But as you get prompted, the engine is essentially saying; "I don't understand those parameters so as smart as I am, I'll use the parameter prompt screen to get them from the user on a silver platter".
Ok. Now to some troubleshooting. I'd pick a report where I know the parameter type and acceptable values ahead of time. Don't use date or date / time params to start with as these have other complication. Use the parameter code to set the value(s) - preferably one value (I like to keep things simple). If the parameter is passed to the report engine correctly, there will not be a parameter prompt and the report will simply come up in the viewer. Once this works, add in a code for printing / exporting and comment out the viewer code. The report should print / export without any issues (no parameter prompt, no error). Repeat the above with a multi-parameter report.
Then it will come to those date and date/time parameters. NULL handling, etc., etc. E.g.; this will not be trivial. And you will somehow need to know the parameter type (string / int / date) before you try to pass it into the report. More help:
Sample apps
vbnet_win_paramengine.zip
vbnet_win_paramviewer.zip
vbnet_win_multirangeparam.zip
vbnet_win_rangeparameters.zip
vbnet_win_sub_daterange_param_engine.zip
vbnet_win_sub_daterange_param_viewer.zip
The above samples are here: Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Helpful KBAs
1688710 - When printing a Crystal report with parameters using 'PrintToPrinter' method, report does not prompt for parameter values
1214110 - How to pass a Date/Time parameter to a report at runtime using VB .NET
1496220 - Suppress the default parameter prompt when the parameter value is not passed through the code
1893554 - How to pass a NULL value to a Crystal Reports optional parameter field using Visual Studio .NET
1425379 - How to avoid being prompted for a parameter when refreshing a report running in a VS .NET application
1461315 - Error; "Missing Parameter Values" when running a parameterized report using Crystal Reports SDK for VS .NET
1215426 - Err Msg: "Missing parameter value" when printing or exporting in VS .NET
And finally this:
Crystal Reports for Visual Studio 2005 Walkthroughs
(The above doc is good for all versions of CR and VS. It has some amazingly great "stuff" in it re. parameters, etc., and more.)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Missing Parameters when JSP Forwarding

I am having difficulty with passing parameters when a forward occurs from
one JSP to a second JSP. When I try to get those parameters on the second
JSP I am getting nulls since it never actually receives them as parameters.
Here is what the code looks like ...
first JSP
======
<jsp:forward page="second.jsp" >
<jsp:param name="arg1" value="hi" />
<jsp:forward>
second JSP
========
String arg1 = request.getParameter( "arg1" )
This situation is occuring for me on iPlanet Web Server 4.1. (Fyi, when I
use the same JSPs on Tomcat through JBuilder, the parameter is passed to the
second JSP.) I am wondering if if I am missing something on how iPlanet
wants me to do pass arguments when forwarding or whether I just need to find
an alternative way to accomplish my goal. Thanks in advance.

In your second JSp try using.
String arg1 = (String) request.getAttribute('arg1");
I'm not sure if this is correct but from my understanding of Servlets you can not set a parameter programatically without overriding the ServletRequest. However, you can set an attribute. If this does not work then the following absolutely will:
JSP 1
<% request.setAttribute("args1","hi");
<jsp:forward page="second.jsp"/>
JSP 2
<% String param = (String) request.getAttribute("arg1"); %>
Hope this helps

Missing parameters in init file

Dear All,
What would happen is following parmeters are missing in the init file of Oracle11g Database?
*.dispatchers='(PROTOCOL=TCP) (SERVICE=xyzXDB)'
*.shared_servers=1
Thanks

user9291399 wrote:
Dear All,
What would happen is following parmeters are missing in the init file of Oracle11g Database?
*.dispatchers='(PROTOCOL=TCP) (SERVICE=xyzXDB)'
*.shared_servers=1
Thanksyour database will operate just fine, but it will not accept shared server connections, only dedicated server.
For more info, you might look at the section on initialization parameters in fine Reference Manual found at tahiti.oracle.com

Missing parameters on webmethod call

On welblogic9.0, I've created a webservice using wsdlc and jwsc to generate code.
I am experiencing a problem where parameters do not seem to be getting deserialized and passed to a web method.
I have used the weblogic testclient along with the axis tcpmon tool to observe that the soap messages on the wire seem to be appropriately formatted. However, when my web method is invoked, the object instance that is received as a parameter does not seemed to be initialized.
My soap request message looks like:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://gestalt.com/enbridge/mdrws/amrmeterdata/webservice/">
<soapenv:Header />
<soapenv:Body>
<ReadMeterRequest>
<meter>test</meter>
<startTime>2005-12-01 17:00:00</startTime>
<endTime>2005-12-01 18:00:00</endTime>
</ReadMeterRequest>
</soapenv:Body>
</soapenv:Envelope>
However, when the ReadMeterRequest instance is passed to my webmethod, the meter, startTime and endTime properties are all null.
I am looking for suggestions on how to track down the cause of this problem.
--Chuck

Hi Ozan.
Thanks for your reply however my problem was that the fields were no longer displayed on the selection screen thus there was no buttons to select for the personalisation settings therefore no way to turn off the personalisation.
However I discovered that if I executed the query using transaction RSRT the full selection screen was displayed and I could access the personalisation buttons for the parameters that had personalisation.
Thanks anyway.

Missing parameters on Bex query selection screen

Hi,
we are using BW3.5 (support pack 18) and one of our users has created a number of variants for a particular query which he executes via the Bex Analyser. The problem is, when ever he runs this query now, all the fields that he populated in his variants no longer appear on his selection screen - even if we delete all the variants.
He did not choose to hide any fields (in the variant) and he has not set any personal values in personalisation.
Can anyone please help?
Thanks,
John.

Hi Ozan.
Thanks for your reply however my problem was that the fields were no longer displayed on the selection screen thus there was no buttons to select for the personalisation settings therefore no way to turn off the personalisation.
However I discovered that if I executed the query using transaction RSRT the full selection screen was displayed and I could access the personalisation buttons for the parameters that had personalisation.
Thanks anyway.

Missing parameters in labview

Hello guys,
I've a big problem.
I really need to build a dll on my VI (named "Controle da Fonte..").
When I try build it, it should return me some parameters but it does not happen.
I've downloaded a sample from NI when it works normally.
I've attached it.
I have no idea what's going on.
Solved!
Go to Solution.
Attachments:
ControleFonte.JPG ‏127 KB
NI_Sample.JPG ‏219 KB

cmoura88 wrote:
In fact, I'm integrating two environments (LabView and C#) and how you noticed, I'm really newbie in LabView.
No worries we were all beginners once, and we'll never master all subjects. Feel free to go through some of this free training to learn more.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Missing parameters for L_TO_CREATE_DN (Transfer Order Creation)

Hi,
Though i am passing T_LTAP_VB-LETYP, i am getting an error message as 'Enter the storage unit type', could you please let me know what i am missing here.
I am passing the following fields to the function module (L_TO_CREATE_DN):
I_LGNUM
I_VBELN
I_COMMIT_WORK = 'X'.
I_BNAME = User name.
T_LTAK-LGNUM
T_LTAP_VB-LGNUM
T_LTAP_VB-LETYP
T_LTAP_VB-NLTYP
T_LTAP_VB-NLPLA
T_LTAP_VB-NSOLM
T_LTAP_VB-NLENR
Thanks
Satya
Edited by: Satya suresh Donepudi on Aug 18, 2010 4:37 PM

Hi,
This function module does create problems in passing the data.
We had a similar situation and finally ended up exporting to memory and importing it in an enhancement implementation inside the function module.
We implemented it here IF_EX_SCM_TRM_RELEVANCE_D~TRM_RELEVANCE_CHECK (before endmethod)
But perhaps it can be done outside this call as well.

Latest sapehpi - startehpi won't run - misses parameters???

Just started with EHP4 on ECC 6.0 and could only download patch-38 of sapehpi which is quite new.
Problem turns up during first time STARTEHPI and this won't run while complaining about parameters not matching.
Log for command doesn't really show a lot more but does also complain about an End-Of-File on INSTANCES in QTEMP.
Couldn't find anything helpful in notes or guides so now hoping on you guys ...
Statement used is: STARTEHPI SID(DE1) TYPE(*ABAP) EPIPATH('/usr/sap/DE1/EHPI')
Not sure if we still need to also use the OPTIONS('-srvarg=/RoleService/off') but that doesn't make a difference for the problem.
Any help appreciated, Louis.

Hi Louis,
I found the reason for the issue. It is based on the strange system library list the customer is running. There is a name conflict with program STARTUP called by command STARTEHPI. There exists also a foreign one in library SYSIB on the customer system. Please have a look at following analysis details:
DSPCMD CMD(STARTEHPI):
======================
                           Opdrachtgegevens afbeelden
Opdracht . . . . . . . :   STARTEHPI     Bibliotheek . . . . . :   DE1EHP
Programma dat opdracht verwerkt . . . :   STARTUP
   Bibliotheek . . . . . . . . . . . . :     *LIBL       <-- !!!
   Gebruikte status voor oproepen van
     programma . . . . . . . . . . . . :     *USER
Bronbestand . . . . . . . . . . . . . :   QCMDSRC
   Bibliotheek . . . . . . . . . . . . :     GEN720UOPT
Sectie van bronbestand . . . . . . . . :   STARTEHPI
Programma voor geldigheidscontrole . . :   *NONE
Geldige werkstand(en) . . . . . . . . :   *PROD
                                            *DEBUG
                                            *SERVICE
Waar verwerking is toegestaan . . . . :   *IMOD      *BMOD      *IREXX
                                            *BREXX     *BPGM      *IPGM
                                            *EXEC      *INTERACT *BATCH
MEER...
Druk op Enter om door te gaan.
F3=Afsluiten   F12=Annuleren
(C) COPYRIGHT IBM CORP. 1980, 2007.
WRKOBJ OBJ(STARTUP) OBJTYPE(*PGM):
==================================
                              Werken met objecten
Typ opties en druk op Enter.
   2=Machtiging bewerken   3=Kopiëren   4=Wissen      5=Machtiging afbeelden
   7=Naam wijzigen         8=Beschrijving afbeelden   13=Beschrijving wijzigen
OPT OBJECT      TYPE      BIBLIOTH.   KENMERK     BESCHRIJVING
      STARTUP     *PGM      SYSIB       CLP    <-- !!!
      STARTUP     *PGM      DE1EHP      CLLE        10/31/10 19:10:00, ILE vers
EINDE
Parameters voor opties 5, 7 en 13 of opdracht
===>
F3=Afsluiten   F4=Lijst   F5=Vernieuwen   F11=Namen en typen   F12=Annuleren
F16=Zoekopdracht herhalen   F17=Zoeken in lijst   F24=Meer toetsen
I explained in the customer ticket in details how do you have to setup the library list in front of the STARTEHPI command, basically there are some needed CHGSYSLIBL calls with OPTION(*REMOVE).
BTW, your EHPI is currently running and waits for connects from SDT GUI.
Regards, René

UWL object link missing parameters when jump to external page via portal

We configured SWFVISU in ECC to jump out to an external application via a portal page. Our resultant URL looks like this:
http://XYZ:50000/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fcom.xyz.portal.frameworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.xyz.pct.xyz%2Fcom.xyz.pct.rols.func_Sales_Representative1%2Fcom.xyz.pct.wrks.s.func_Sales%2Fcom.xyz.pct.pgs.func_Order_Accounts_OA&uname=USER.CORP_LDAP.mdeklerk&langu=EN
BUT the work item object link parameter i.e. Sales Order No. does not get passed/attached to the string. What are we missing?

It is passed as an implicit UWL parameter and will not be displayed in URL. You can read this parameter from webdynpro application.

RFC connection missing parameters

Hi all,
I'm trying to test the RFC->RFC synchronous connection as per documentation. I'm trying to create the RFC(SM59) in R/3, I don't know if I'm doing the right thing?
RFC connection name: XI
Connection type: T (TCP/IP connection)
Activation type: ? (don't know)
Program ID: ? (don't know)
gateway host: sap-r3
gateway service: sapgw00
Can anyone help me with this.
I appreciate your response.
Regards,
felix.

Felix,
Look for the solutions under search term RFC SENDER ADAPTER or simply RFC ADAPTER in this forum.
You will get good guidance.
Thanks,
Bhaskar

APEX - Missing Parameters on Windows Mobile

I'm developing an application with APEX. It works fine on my PC. However when I try to run it on a PDA, new pages that should appear after clicking on a button doesn't appear.
This is what appear when a click the button on a PC:
http://myserver:8080/apex/f?p=108:100:2388425118660122:CONTROLO_LOTES:NO:100:P100_DESC:LOTES
When a use same button on a PDA:
http://myserver:8080/apex/f?p=108:100:2388425118660122:::::

Hi,
Post your question in [Application Express|http://forums.oracle.com/forums/forum.jspa?forumID=137] forum, you would probably get a better/faster response.
Regards,
Hussein

Missing parameters

Similar Messages

Maybe you are looking for