Missing Part list for Plant to Plant Purchase order

Hi,
      I need the following requirement in CO24,
      In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It  should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.G

Hi Purushothaman,
If you have the following settings in OPJK:
Plant                 XXXX
Order Type       XXXX
Availability Check    2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule        PP PP checking rule
Component Check Type    ATP check
Release material     2  Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel

Similar Messages

  • Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

    Hi Team,
    We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
    Production Order quantity: 100 kg
    Componenet A required quantity: 100 kg
    MMBE Unrestricted qty: 1000 kg
    MMBE Reserved Quantity: 2000 kg
    So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.

    Hello
    The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
    Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
    Problem with missing parts list during production order creation
    issue in committing material for production order
    Material Availibility check in Production orders
    availability check
    order is not released
    As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
    BR
    Caetano

  • Missing part list in plant maintenance ( CO 24)

    Hi SAP experts,
    Is it possible to use the transaction CO24 ( missing part list)  for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
    Regards

    Hi,
    I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
    Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
    Hope thsi will help you.
    regards
    radhak mk

  • Missing Parts List While creating Prd. Order

    Hi Friends,
    My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving  Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
    To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
    But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a) Removed tick mark in No Availability check.
    b) Type of component check Given as - ATP check.
    c) Material release - 1. User decides on release if parts are missing.
    d) PP Checking rule (Which Is same As with plant parameter OPPQ)
    e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
    *Please Suggestu2026u2026u2026u2026*
    hari

    Hi,
    Please check same checking rule use in Material master and with order type and plant?
    Check the cheking group in material master MRP3 view for all material.
    Go to Transection OPJJ - Maintain scope of check,
    Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
    (1). CO24- Missing Parts Information System
    Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
    (2). COOIS : Production Order Information System
    Under this transaction you need to Select in List option as Components and then go on Selection Tab.
    For collective availability check use
    COHV - Excute the roport w ith collective avaliabilty check.
    COMAC.
    Hope this help.
    Regards,
    R.Brahmankar

  • Missing parts list variations

    Hi Guru's,
    When we checked the missing part list in the "COOISPI "report (Process Order infromation system) for the planned order and compared this with the missing parts in the MD12 for the particular planned Order, there was a differnece in number of entires (components) betwwne both these lists. why is the missing part list for MD12 and COOISPI is showing the difference?
    If anyone is familiar with this report please let me know what can be the reason for the difference. also can any explain the logic how this report does the availability check for the missing parts.
    Thanks,
    Nagesh.

    Dear Nagesh,
    1) For missing parts at plan order level check in MDVP ( Not in COOISPI )
    2) Compare MDVP with MD12
    3) AV check will carried out based on settings defined in OPJJ ( Combination of cheing group & checking rule )
    Regards
    Madhu Kumar

  • CO24 missing parts list

    Hi All,
    Till last week the missing parts list for a particular MRP controller showed many parts but since this week it only shows some parts and we are not able to find out  the difference between what is expected and what it is showing.
    Can somebdy guide me through the exact process how it searches for missing parts through Availability check.
    Thanks
    Shailesh.

    Dear Shailesh
    Last week there might be No stock for componets, so system might have shown many componets list
    but this week, enough stock might be availble for componets, so system is not showing missing parts
    just check in MMBE for required components stock
    Regards
    kumar
    Edited by: kumar kumar on Sep 9, 2009 12:26 PM

  • IDOC for missing parts list

    Hi,
    We would like to send the missing parts list generated from CO24 to other system. Is there any standard IDOC available to send missing parts?
    I would appreciate your help.
    Thanks.

    Karthik,
    Thanks for your quick reply. But this is not what I am looking out for. I am sorry, I think my question was not clear.
    There is one functionality in Production Planning area that we can find out the missing parts for the production order. We have to send the information to our warehouse asking for the missing parts to fulfill the production order. Our warehouse is not on SAP so we want to send the information through an ALE/IDOC. In order to do this I wanted to know that is there any standard IDOC type which can be used or we have to create a custom IDOC.
    Thanks.

  • Extend task list for new planning plant

    Hi Gurus,
    I have 40 task lists for a planning plant 1000. I want to extend them for a new planning plant 2000. Is there any method to do it without usnig BDC or LSMW?
    Regards,
    VM

    Hello VM,
    No it is not possible to simply extend the Task list.
    You can copy the same for different planning plant. But if it is not so much necessary, Make other as Maintenance Plant rather than Planning plant.
    Regards
    Naveen

  • Scope of Check Variation in Missing Part list Production Order

    Hi,
    I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
    Why this difference is coming,can any body tell the possible causes.
    Cheers,
    Kumar.S

    >
    KUMAR.S. wrote:
    > Hi,
    >
    > I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
    >
    > Why this difference is coming,can any body tell the possible causes.
    >
    > Cheers,
    > Kumar.S
    Kumar,
    Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction,  check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
    If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
    Regards,
    Prasobh

  • Production Order missing Part list error  date 1,857 is not convertable

    *Dear Experts*
    When i m  trying to check missing part list at production Order then system is showing the error
    The date 1,857 is not convertible (please correct) in Production order Missing part list.
    Rgds
    Pankaj Agarwal

    Dear ,
    System is throwing you this message beacue your FC calander is vaild till 2010 and asking you to put the date btn  FC valid from 2004 and FC valid to 2010.
    Goto -OP03-Select the Factory Calnder Tab in change mode  (pencil mode ) -Select the applicable calender  chek box-Double click this -Extende the validit date till 2020 or beyond so that u will not face not only in this particular issue but in many other txn later on .
    Agian -come back to OP03 main screen -Slect the Holiday calaner -Extende the same way  and reassing in Factory calander
    after this , do not forget to re-ssign this FC in respective plant in OP03-Plant assingment .
    Try and revert back
    Regards
    JH
    Edited by: Jiaul Haque on May 27, 2010 3:14 PM

  • Missing Part List !!

    HI
    Is there any std report to see the missing part list.
    I mean material issued to prod order and we wana see the shortage.
    Thank You

    in co11n or co15--from menu --u can check for any missing parts against prod. order..

  • "missing part list" releasing process order, but the material there is

    Hi dears,
    I’ve a strange problem.
    When i’m going to release a process order, the system give me a “missing part list”.
    The strange is the material indicated  in that list, a component of a phantom, is present in state free in the st. location indicate.
    Does anybody know what can be the problem?
    Thanks in advance,
    Juan

    Hi all,
    the problem was that the material was present in quantity lower than safety stock.
    For this reason, the system give me that advice.
    however thanks for the help.
    Best regards,
    Juan

  • MATP missing parts list

    Hi,
    I am getting the following messages in MATP missgin parts list for one material.
    Standard Check and/or 1. Check Step
    2. Check Step for Resolving Violation of Plan Validity
    What are the above 2 steps ?
    Regards,
    RS
    Edited by: sap_apo31 on Dec 16, 2011 12:52 PM

    hi,
    In line with the above query, I have another issue..
    At the component level, stock of 100 kg is available, even then during MATP (sales order for parent material ) system is showing the component quantity as missing parts.
    When I tried creating sales order directly for the component system is taking the stock into account during product availability check.
    Is there something missing in configuration ?
    Product check is 'on' in component check instruction. Let me know if further details required.
    Regards,
    RS

  • Co24 missing parts list does not show material with shortage

    Dear All,
    I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
    In Co24 tcode system does not show any missing parts for the same production order.
    For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
    My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
    Is there any interconnection with expection messages to bring process forward?
    Thanks for your help!
    Regards, Andrey

    It seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
    After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected.

  • Missing parts list at planned order level

    I have tried to use comac t-code for checking the missing parts list at planned order level. but no log has been generated. pls advise. Is there any way to do the same?

    Hi,
    Use MDVP, i think it should meet your need.
    If helpful award points
    Regards,
    Vivek

Maybe you are looking for