Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

After running Recovery from a recent Sytem Image Backup the LRS_ESP partition is now missing and the Used space on the PBR_DRV partition is reported as 95.20MB while it previously reported 9.52GB in use. The WINRE_DRV, SYSTEM_DRV, Windows8_OS and D:LENOVO partions appear to be OK.
I ran the Recover after replacing the original 500GB HDD with a 1TB. Any details/links/recommendations on recreating/correcting the LRS_ESP and PBR_DRV partitions? Thanks!

Here are the before and after partition details obtained through Partition Wizard:
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Similar Messages

System Image Backup in windows 8.1 not working

Hi,
I am trying to take system image backup on windows 8.1 with USB drive attached and I am getting the following error which is given at the end of the post. It always says the backup location is invalid.When I tried with -allCritical it fails with
I tried to wbadmin enable backup, that also fails with "Warning: The ENABLE BACKUP command is not supported in this version of Windows. The operation ended before completion."
Can someone help with the wbadmin backup, please. It seems to be a red-herring.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c:
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up OS(C:) to E:.
Do you want to start the backup operation?
[Y] Yes [N] No Y
ERROR - The specified backup location could not be found or is not a
supported backup storage location.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c: -allCritical -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up ESP(EFI System Partition) (500.00 MB),OS(C:),(\\?\Volume{26a2e53d-6299-4ef1-a7e7-860f1e839ed6}\) to E:.
ERROR - The specified backup location could not be found or is not a
supported backup storage location.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

2nd drive unformatted and not restored after attempting restore from a system image

I created a system image, which included drive C (where Windows is installed) and drive G (where some installed Windows programs are located). I then ran into a situation where I wanted to restore from the system image. With my first attempt,
this process took several days. When I returned home from work, my computer had booted up into Windows -- drive C had successfully been restored. I soon found out though that drive G was in an unformatted state.
Now, given the time it took for each drive to restore and the sizes of data for each drive (160gb for C and 1000gb for G), it seemed odd to me that the entire process had completed already, given the time that had passed and the progress indicated for drive
G in the status bar, in the morning before I went to work. It is entirely possible that one of my cats may have jumped on my desk and somehow cancelled the operation.
My questions are:
1. if the restore is cancelled while the 2nd disk is being restored, will the 1st disk (C) still be successfully restored?
2. why does this process take so long?
3. if there is some other error, is it displayed? Does system restore automatically reboot after completion/cancellation? Is there an error file created somewhere if there was an error, or perhaps something mentioned in a log file? If so,
where?
4. has anyone encountered a similar issue before and can provide any insight?
5. anything else I'm missing?
I'm attempting to restore a second time, and it is not even halfway through drive C, so it might not be until the end of the week before the entire process completes. To be safe, especially from nosey cats, I disabled the mouse and keyboard so no input
can interrupt and accidentally cancel the process.
thanks,
Chris

Hi Chris,
For the first problem, if the restore is cancelled while the 2nd disk is being restored, the 1st disk (C) can be successfully restored.
For the second problem, I think it is normal to take a long time to finish the process, it is depend on the size of the date.
For the third problem, you may check the setup log files to find the clue of the cause.
For you convenience: Windows Setup Log Files and Event Logs
http://technet.microsoft.com/en-us/library/hh824819.aspx
You may try the methods listed in the following article step by step.
How to Do a System Image Recovery in Windows 7
http://www.sevenforums.com/tutorials/675-system-image-recovery.html
Please note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

SYSTEM IMAGE BACKUP. WINDOWS 8.1

Good day experts.
When running Windows 8.1's 'System Image Backup', I recieve the attached error message:-
I have ran SIB once sucessfully since upgrading to 8.1, but the second time I try to backup I get the error message. I have tried formatting my backup drive & still the problem persists. Could this be yet another glich with the os.
Thanks for reading. Can anyone help?
This question was solved.
View Solution.

I ran this command:- wbAdmin start backup -backupTarget:E: -include:C: all sorted.

System Image Backup in Windows 10

I'm trying to do an image Backup on the Windows 10 Build 9879 system disk but find that it's no longer possible. How do I do it?
Renee
"MODERN PROGRAMMING is deficient in elementary ways BECAUSE of problems INTRODUCED by MODERN PROGRAMMING." Me

No difference I can see from Win 8.1...
No doubt you have found that you can initiate a System Image backup manually by starting the
File History panel, then choosing the System Image Backup link in the bottom-left corner.
The wbadmin command is also still available, and as far as I can see can be scheduled just like in Windows 8.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

System Image backup using Windows 8 on my Compaq CQ 58 Notebook ?

For creating a System Image backup the HP guide shows two selections (External Hard Drive or Disc). Can I use a USB flash drive?
This question was solved.
View Solution.

Which HP guide covering system image backup creation are you referring to?
The only option I am aware of that are available are on a hard disk, DVD media and network locations (NAS), not on a USB flash disk.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I restore the computer from a system image backup?

Hi, Please help me.
I am running Windows 8.1 Pro on a HP Compac DX 7500
After a misfortune installation of VirtualBox I decided to make a system restore to the restore point I created just before the installation. That did not work at all.
Windows 8.1 does not boot any longer.
I have the following options for booting:
* Normal boot                                              Result: Logging in Then welcome. Than black
Esc Boot menu                                            I can select different drives for booting
                                                                       When selecting primary HD Same result as normal boot.
                                                                       I could boot from CD or DVD and maybe from an USB.
F9 Diagnostic boot                                   When running it I get the error code. See 1) below
F10 Setup Entering BIOS
F11 Recovery                                          Same result as normal boot.
F12 Boot from LAN
I have located the Windows Image backup folders. Should I put the image folder on a DVD or an USB drive and boot from that or how should I do?
1) Boot path testing. Error code: BIOHD-4 Uninitialized / corrupt boot structure detected.
Regards

If you got it by download and are still using the same Apple_ID, it is still sitting on Apple's Mac App store for re-download whenever necessary, such as after you wipe your computer.

System Image Backups fails after upgrading to Windows 8.1 with 0x80040154

Backed up a Windows 8.0 system to DVD with no issues. Upgraded the computer to 8.1, and now when we tried to backup the system to DVD, we are getting the error message "An error occurred, class not registered (0x80040154)"
Anyone have any suggestions on how to fix this issue?
Richard

Hi,
According to your description,did you format the BD-R disc ?
Before you start system image backup, please format the BD-R disc.
For more information, you may refer to:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Regards,
Kelvin Xu
TechNet Community Support

System Image Backup to flashdrive: HP change to software prevents this option - per support

HP informs me System Image Backup to flashdrive (per Win 8.1 documenttion) has been disabled by HP.
Does anyone know a workaround? Perhaps from Cmd line?
Recovery/File History/System Image Backup - will not function to a flashdrive per Win 8.1 directions because HP has disabled the option - per support.

You have been told correctly that you cannot run a File History image backup to a USB Flash drive. There is no work around.
Even if you could, size limitations would probably prevent all the files of your hard drive being backed up, also, Flash drives are not dependable nor reliable for such a process.
The should be done to an external hard drive for reliability and speed.
There are much better image backup programs out there such as Macrium Reflect Free which would do better job and be more secure. If your interested, see this:
http://download.cnet.com/Macrium-Reflect-Free/3000-2242_4-10845728.html?part=dl-&subj=dl&tag=button
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Windows 8.1 System Image Backup - Unable to backup to network share due to unsupported "version of the file format"

I have a Windows 8.1 Pro 64 bit system that I am trying to make a system image backup via Windows 8.1's System Image Backup feature.
The backup destination is a network share, but the image creation is failing with the following error:
The version does not support this version of the file format
After some investigation, it appears this is due to the network share (a Netgear BlackArmor NAS 220)not
supporting sparse files. The consensus out on the web seems to be that your smb.conf file on the NAS needs to have strict allocate = yes added, in order to support sparse files. However, as far as I can tell with the BlackArmor NAS
220, there is no way to edit the smb.conf file (and I'm not even 100% positive they're running Samba--but I bet they are).
Some more searching revealed another possible option here:
If you don't need to exclude files from your backup, use the "-allcritical" option in your command line. AS IN:
wbadmin start backup -backupTarget:\backup1\backupdrive1\ -include:c: -user:administrator -password:xxxx -systemState -vssFull -allcritical -quiet
This changes it to Block backup and gets rid of the error.
I'm trying to do a complete backup, so no exclusions are wanted or needed. So, i tried this, and got the exact same error (only this time it was on the command line, rather than a GUI dialog).
Is there any way to do backups to a network share that doesn't support sparse files via Windows 8.1's System Image Backup facility?
Alternatively, is there a way to enable the strict allocate = yes on a BlackArmor NAS 220?

Hi,
When using BackupAssist to perform a backup from a Windows file system to a Linux (ext4 or XFS) file
system, the backup can fail if the following conditions apply.
The backup is running a system protection job to the Linux based NAS.
The Linux NAS has sparse file allocation turned on.
These two contition can cause the problem like yours.
You can refer to the document which also contains an solution for further details.
http://www.backupassist.com/downloads/resources/sparse_file_system_compatability.pdf
Roger Lu
TechNet Community Support

Any solution for Windows 8.1 System Image Backup on DVD fails with error 0x80040154??(apart taking backup in external drive)

Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying 0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
hard drive...any suggestion please let me know asap!
regards!

Hi,
Check this article first:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Please capture the system event during you reproing this issue by using Process monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any Access denied error, follow this blog to solve this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

How do I copy over files from "Previous System 1" to my current system

Hello.
I was having trouble with starting up my computer. I used a friend's computer to check Apple's Knowledge Base. The suggestion was to perform an Arhive and Install and to select the option of preserving my user and network settings.
I could not locate my Panther Install disc (my previous OS was 10.3.9). However, I did find my Jaguar 10.2 Install disc so I decided to use that instead (my disorganization is truly exasperating).
I thought once my system was again accessible (which it now is) I'd be able to reinstall Panther from the Archive even though I still can't locate my Panther Install disc. Is that possible?
I am, of course, having trouble using many of my 10.3.9 applications as they are incompatible with my currently loaded Jaguar 10.2 OS. I am unable to print, get my email, or use countless applications.
I'd sure appreciate help and suggestions as to how I might reaccess my 10.3.9 OS from the Archive so that I can avoid having to repurchase and reload Panther to get my original system back.
Is there a simple way to copy/move my previous system from "Previous System 1" back to my current system?
Thanks in advance for any suggestions.
Luna Monte
P.S. I foolishly neglected to maintain a back-up of my data onto an external disk. If I can get things back to where they were, I've learned my lesson.
iMac Flat Panel Mac OS X (10.2.x)

Lona:
Welcome to Apple Discussions.
As Kappy pointed out, you need Panther install disks to install Panther. However, you may be able to recover your data files from the Previous System Folder.
You can purchase Panther disks from applerescue. Your computer will support Tiger if it meets the minimum system requirements for Tiger.
Please don't hesitate to post back should you have further questions.
Good luck.
cornelius

AppleTv from previous system

Hello -
I upgraded to Lepard. I in the upgrade I lost all my itunes library and photos etc. I was able to retrieve the itunes library from "previous system". How do I retrieve my AppleTV movies from the previous system?

Your movies should be in the same place as your music (in a folder called movies within the itunes folder).

Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

Similar Messages

Maybe you are looking for