Missing PCI driver

Need to install driver for my PCI Simple com controller, detail as below:
PCI\VEN_11D4&DEV_1805&SUBSYS_180511D4&REV_00
PCI\VEN_11D4&DEV_1805&SUBSYS_180511D4
PCI\VEN_11D4&DEV_1805&CC_078000
PCI\VEN_11D4&DEV_1805&CC_0780
Kindly assist.
Thank you.

Hi,
Pleae try Modem driver from the following link:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3658084&swLangOid=8&swEnvOid=4060
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Z600 workstation missing pci data acquisition and signal processing controller driver

I just installed Win7 Pro x86 on my Z600 workstation. It was an upgrade from WinXP Pro. In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02. Can someone assist me in finding these drivers. I looked on the Support/Drivers page for this model but couldn't find anything.
This question was solved.
View Solution.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Missing pci simple communications controller

missing pci simple communications controller for windows 8.1.

Hi:
You need this driver. Manually install it if the auto install doesn't work.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3459243&swItemId=vc_78668_2&swEnvOid=4053

Missing Ethernet driver for Z440 Workstation?

Hi there,
I just reinstalled this workstation with win 8.1 and used the driver recovery CD for installing drivers but there seems to be missing a driver for ethernet and windows doesnt reconize it either so...pretty annoying.
PCI\VEN_8086&DEV_15A0&SUBSYS_2129103C&REV_05\3&11583659&0&C8
I hope someone can help with this!
Kind regards,
Allan
This question was solved.
View Solution.

Hi, Allan:
You need this driver...first or second file as applicable.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23071

Where's my missing hard drive space?

I posted earlier about this, it may be a bit off topic but if anyone can offer a clue, I would appreciate it.
I got my win 7 upgrade and was waiting until vista started giving me headaches or the win7 service pack1 came out to upgrade...vista got me to upgrade today and I have to admit it was much less painful than i anticipated.
My question is about the missing hard drive space on my Idea center K230 on the box and on the side of the comp it claims a 640 HD (it claims in small print that up to 18gb may be used for the service partition) I questioned this when i first got it and even after deleting all the preloaded crap it was still saying 540 available out of 580GB....then I read that Lenovo has a huge partition for backup. So when I do my upgrade to win 7- 64 bit, I do a clean install and delete the smaller partition and reformat and expand the larger but before installing the new OS it says I have 596 available, so where the hell is the other 44GB of hard drive...did Lenovo rip us off and put 600GB hard drives in the K230's or is there a hidden partition still left that I cant find?
I am running everything off of my 596GB C: drive, I have my virus stuff and video card extras loaded, everything from the upgrade and 21 available patches and new drivers for most of my stuff....right now I am at at 575gb available and if i can ever find a printer driver that works I will create a backup point or disc from there, whatever win 7 allows. I never wanted the Lenovo one button back up and thought it was stupid to put a big glowing button on the keyboard that wipes your system back to when it came out of the box...I had nightmares of someone getting curious and going "what does this button do?"
.I notice I have a program files folder and a program files (x86) folder with a bunch of redundant files. what's the deal with this is Lenovo still hiding a backup program (maybe in that hidden partition?) that fills my hard drive twice as fast or is there a purpose for the file copies?
Any info on the above questions would be appreciated, and for those of you just looking for upgrade info I have good news, when you finally get your win7 upgrade disc it is the easiest windows installation ever, almost copmpletely automated, and very fast. So far the only sticking point is finding a printer driver, but I have 3 printers i can try, maybe one is supported.

Hi wise2u!
You can read all the details about how storage manufacturers use multiples of 1000 to measure disk space, and Windows reports it in multiples of 1024, and there is some overhead for Windows, or you can just use this rule of thumb from wikipedia:
A general rule of thumb to quickly convert the manufacturer's hard disk capacity to the standard Microsoft Windows formatted capacity is 0.93*capacity of HDD from manufacturer for HDDs less than a terabyte and 0.91*capacity of HDD from manufacturer for HDDs equal to or greater than 1 terabyte.
0.93 * 640GB = 595GB, which is about what you're seeing.
I don't work for Lenovo. I'm a crazy volunteer!

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver.

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting the iPhone with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver for Windows 8, iTunes and iPhone. MS does not care! This seems to be a general problem with Windows 8 that a number of drivers that used to work with Windows 7 now do not work, ie. iPhone to iTunes, HTC to HTCSync, Samsung to Kies etc. I need this connection to work in order to syncronize with Outlook and my iTunes library.

diesel vdub wrote:
Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
Like the fact that you just called most of us stupid there

Missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV

missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV. Can someone please help me and tell me how to get these drivers downloaded to my pc.Id really appreciate it and thanks in advance...

Hi, It is the card reader. Please try the first one for Windows: http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false Regards.

Missing *.inf driver for 2605dtn and windows 7 64 bit

missing *.inf driver for 2605dtn and windows 7 64 bit
I just piurchased a new HP laptop with windows 7 64 bit installed. I do not have any windows 7 disks.
Where do I obtain the necessary drivers for this printer?

HI RandyJohnson,
You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information, go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

GPP - Missing Mapped Drives

Domain Functional Level: Windows Server 2003
Domain Controllers: Windows Server 2012 R2
Workstations: Windows 7 PRO, x86
I'm mapping network shares for my users using GPP, running under User Logon, and Item Level Targeting. The missing network drives are Windows Server 2003 R2 SP2 file servers. The network drives that DO map are Windows Server 2012 R2 file servers.
When I log in as a test user (copied from an offending user), I can browse to the 2003 shares via UNC, and I am capable of manually mapping the drives are well. However, when I log off and log back in, the drives are missing again
for the 2003 shares. Furthermore, I'm mapping user's home folders via Profile tab in their user accounts, and that's going to the same 2003 share as well. That isn't mapping either.
I believe that it was working fine last week, but then SOMETHING must have changed. I'm unsure of what though. Perhaps someone can shed some light into this?

> When I manually a) selected all mapped drives, b) disconnected them, c)
> logged off and back on...my mapped drives did not show up. However,
> when I everything until c), but added GPUPDATE /FORCE, after logon, my
> drives mapped correctly. I'm assuming this is by design?
Not to my knowledge - they SHOULD be present again without gpupdate. The
log I mentioned above might be helpful.
> Preferences don't "update" like Policies do?
In most cases, they do :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

G500 laptop upgraded to windows 8.1 now have a message missing a driver

My G500 laptop just upgraded to Windows 8.1 and now my alert action center message tray says I am missing a driver?
I can’t find anything missing? I looked through all the devices 5 times but nothing is marked with a question mark or similar?
Any thoughts?

Hi deagonslair2013
What you describe has been happening since the preview, Because all devices on a network talk to each other the driver error may not be on your G500 but on another device on the network.
For instance: I own a G700 & G505, I connected a tablet to the G505 & it installed the device but could not find any drivers for that device, Since then my G700 has been showing a driver missing although all devices are working fine on the G700 in device manager.
If you have any other laptops or desktops on your network with device drivers missing disable those devices & re-run the hardware scan on your G500 & see if that is the cause.
Edit What version of Lenovo solution center do you have installed, It should be version 2.3.002.
If your version has a .18 in the string its out of date & you need to update to the above version.
Hope that helps!
And welcome to the forum.
Catt

PCI DRIVER FOR MY ALTEC LAPTOP

Hi,
PLease help me by finding the below Hardware IDs PCI Driver for my PC.
PCI\VEN_10EC&DEV_5229&SUBSYS_18FE103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_18FE103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
Thanks in Advance!

Please click on the below shown link to download and install the driver you are loooking for
http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67016.exe
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GBL84
Although I am an HP employee, I am speaking for myself and not for HP

Problem in HP notebook display and pci driver

I have a notebook HP Pavilion g6-2201ax OS win-8.1 ....
I recently installed it, but even after download drivers from official site, it display and pci driver not working...
Don't understand what to do now...
It has 2 graphics with error sign,
         AMD Radeon HD 7640G
         AMD Radeon HD 7670M
and PCI with error
        PCI\VEN_1002&DEV_6840&SUBSYS_184A103C&REV_00
Please Help!!!!!                         Thank You....

Hi,
Please uninstall from the device manager then reboot the machine, wait for 10mins or so OR download driver from the following link, uninstall driver using Device Manager then install driver from the downloaded file.
   http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5305...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

128 pcie drive performance

I'm considering purchasing my first Mac. I've been a *NIX user since 2006 with the exception of the many hours I enjoy installing updates for an OS I don't use and renewing anti-virus subscriptions all so I can use a mobile phone.
What has me sold is the performance of the PCIE drives, and I would potentially find the default OS tolerable. The problem I am concerned with is the really BAD, deceptive marketing regarding the read/write speed of the 128 size. I refer to the 312.9MB / s write of the 128GB SanDisk found in the 13" vs the 676.7MB / s write of the 256GB Samsung found in the 15". I would return the purchase if I ended up with the lower speed so would like to avoid that hassle for all parties.
What is the story on this with the current model? Same goes for Macbook Air, haven't decided between the two but I hate to take a performance hit when replacing a very old laptop. Money is an issue, I'm limited to the 13" versions, and the 128 drive - unless I go with the Air. Again, same PCIE SSD or flash in these two devices? Didn't get an employee to acknowledge there was a difference after dragging myself to the Apple store.

My local store did have the 256GB apple ssd sm0256f in the 13" model, only wish there were a way to confirm all came that way. It will be worth the paying of sales tax for that. It is out of my price range, but when looking at benchmarks of that particular dirve... wow.
http://www.harddrivebenchmark.net/hdd.php?hdd=APPLE+SSD+SM0256F

Windows XP PCI Driver porting to Windows 8

I have Windows XP PCI driver running on a proprietary serial board. Ported the same driver to Windows 8 by compiling it under Visual 2013 it compiled and linked flawlessly and created the ".sys" file. On the INF side making sure vendor
and sub ids were correct. Ran under windebug so to go around the digital signature restriction. It passed the configuration stage in the INF file but generated an error when it came to "installation" section of INF file. I had a
break point setup at driver entry but it never made it that far.
It's complaining about the functional driver in installation in other words can't seem to find the ".sys" file otherwise the break point should have worked. Any idea what may be wrong. I am not in front of the computer so don't have
the exact error message that it displays in the log file. Appreciate the response back. Thanks.

Post your INF file
Azius Developer Training www.azius.com Windows device driver, internals, security, & forensics training and consulting. Blog at www.azius.com/blog

Pci driver not loading

hi i have compaq 110c 1010sa the netbook crashed with blue screen when turned on so i have reinstalled xp and have got it back from the dead most things work i have one issue left with the pci driver which downloads but when installing it stops and says its the hardware supported is not recognized

Hi:
Please go to the device manager and click on the PCI device with the yellow ? mark.
Then click on the details tab.
Post the string of characters you see there.
You need XP SP2 or SP3 installed in order to see the hardware ID.
Paul

Missing PCI driver

Similar Messages

Maybe you are looking for