Missing permission on DPM Report

I just reinstalled a DPM server and restored the database. Everything seems to be working, except when I try to viewer the "Tage Management" report.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
The EXECUTE permission was denied on the object 'ufn_MM_GetPgLabels', database 'DPMDB_DKODPM01', schema 'dbo'.
If I view the "Recovery Point Status" report it Works fine.
I can't figure out what user/Group is missing permissions on SSRS or the database?

Hi,
I have never heard or seen that before - lucky you.
Did you run DPMSYNC -Sync after you restored the DPMDB ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Refresh buttom missing in the S_ALR_87013554 report in ECC6.0

Hi,
We have recently upgraded SAP from 4.6B to ECC6.0. We found that the refresh button is missing in the S_ALR_87013554 report. It was available in 4.6B.
whether it is default error in ECC6.0 that the refresh button is missing? Is it a SAP standard error? Is there any way to address this error?
Appreciate your help.
Regards,
Harish

go to
settings -> option
check the expert mode box
Now go to menu path
report -> refresh
you can refresh this report
this was always the way to refresh cost element reports - it has nothing to do with your upgrade

ParameterFieldController class and getDataDefController() method missing from com.crystaldecisions.reports.sdk.*

I am trying to use the desktop samples for the JRC. The parameter setting sample will not compile because the ParameterFieldController class and the ReportClientDocument's getDataDefController() method are missing from com.crystaldecisions.reports.sdk.* .
I have release 2 of Crystal Reports XI Developer and should have the most up to date jrcerom.jar file for that product. What is it going to take to get this working? This is a critical aspect of using Crystal Reports for our java application reporting needs.
Prompt attention to this is appreciated.

 That class is not in that package, but another package imported in the sample, and in a different jar file. The readme file should reference a deployment guide listing the required jar files, which I've copied here: <a href="http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf" target="_blank">http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf</a>Sincerely,Ted Ueda

SCCM Reporting: Software Updates / Apllication the "Installed date" is missing or null in reports

When the “V_GS_Add_Remove_Programs” or “V_GS_Quick_Fix_Engineering” queried for installed date (the views that contains information on updates/application
installed date), the “installDate0” Column returns “Null” or is
"blank" on most of the rows.
The machine in this example is “X”
2. As you can see from the machines X's add remove Programs installed Date is given clearly.
Appreciate your help on this as its for an audit report of windows updates and applications installed date, I know that some applications do not populate this value but my argument is if its visible from Programs and Features why isn't the data being collected.
Best Regards,
Michael

Duplicated post.
http://social.technet.microsoft.com/Forums/en-US/678489ad-3289-4fd6-8e84-bbaf487abacf/sccm-reporting-software-updates-apllication-the-installed-date-is-missing-or-null-in-reports?forum=configmanagergeneral
http://www.enhansoft.com/

Need Users and ACL permission for KM Reports

Hello Experts,
Need you help for one requirement , in which i need to provide a list of users with ACL permission of each report from KM. There is huge amount of reports so it is quite time consuming to get each report open & to check the ACL and user from KM.
It there is any thing , so that i can get the list of user with the ACL permission for each reports?
Any help will be appreciated with points.
Regards
AK

Hi AK,
I misunderstood your query,if you just want to check the permission of all reports then you can use the default permission report available in the content Administration->KM Content->toolbox->reports->permission report.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/5290412facac5fe10000000a1550b0/frameset.htm
If you could not find the report contact basis team to do the configuration
http://help.sap.com/saphelp_nw04/helpdata/en/07/dad131443b314988eeece94506f861/frameset.htm
Naga

Fields missing while printing crystal reports !!

Hello everyone
I have a crystal report application in VB.NET 2005, which gets the values of a field from the database and supports printing of the report in the following formats
1. pdf
2. directly to a printer - printout
When i export the report using reportdocument to pdf , all the fields are getting printed : Normal - As expected
But when i print the report directly using PrintToPrinter method,i am not able to print some of the fields. i.e some of the entries are missing in that report printout
Can someone guess what could be the problem ???
Are there any limitations / preconfigurations that needs to be done apart from setting page size,margin before using the PrintToPrinter method
Regards
Srivatsa

OK, a few incongruencies here:
I'm using the version of the Crystal Reports that ships along with the Visual Studio.NET 2005.
- that would make is CR 10.2
We have also tried applying the latest service packs crxir2_sp4_full_build
- So SP 4 for CR XI release 2 would not do you much good as per above (if you are indeed using CR 10.2(?))
- How did you get to the crxir2_sp4_full_build? This is in a gated section of the SAP website. The only publically available SP 4 for CR XI r2 is "incremental... If you did apply crxir2_sp4_full_build, then you are working with CR XI r2 now...
The behavior is seen in the web application and the behavior is seen both in the dev and deployment system.
- So this does not work anywhere? If so, why bother going to deployment?
Also i tried exporting to pdf soon before / after printing. But the fields are present in the pdf and not on the printouts
- Confirm that you do see the fields on an exported PDF and when you print the PDF you get a blank printout?
More clarification needed:
We need to be absolutely clear on what version of Crystal Reports you are using. Open your .NET project, go to your references and look for CrystalDecisions.Crystalreports.Engine.dll. What version is this assembly?
Also, please answer the rest of the questions above.
Ludek

'Save layout' button missing in the ALV report layout screen

Hi Friends,
 In one of our ALV report the 'save layout' button is missing in the report output screen.i have used the OO concept for creating the ALV output and not the function module.I have attached the code below used for creating the ALV grid.
CREATE OBJECT alv_grid
 EXPORTING i_parent = g_container_2.
CALL METHOD alv_grid->set_table_for_first_display
 exporting
 i_structure_name = 'PA0002'
 is_layout =
 CHANGING
 it_outtab = gt_outtab
 it_fieldcatalog = wa_fieldcat.
But i'm not able to trace why the 'save layout' button is missing in the output.Can anyone of you help me in sorting out this problem.
Thanks and Regards,
Vadivel.

Pass A to I_SAVE parameter. That will give the options to the user to save the layout outs.
I_SAVE = SPACE
Layouts cannot be saved.
I_SAVE = 'U'
Only user-defined layouts can be saved.
I_SAVE = 'X'
Only global layouts can be saved.
I_SAVE = 'A'
Both user-defined and global layouts can be saved.
Regards,
Ravi
Note : Please mark all the helpful answers
Message was edited by: Ravikumar Allampallam

Profit center is missing in profit center report

Dear Expert,
I created a billing , but the profit center document is not created automatically / missing. in fact I already maintained the profit center in material master, and also in OKB9 I have select the profit segment for sales account.
I checked in the journal , there is an information about the profit center same as in the material master which i have maintained. but when i checked in the profit center report there is no such profit center data enter from that billing transaction, then I tried transaction using T-code 1KEK, error message occur "cannot post profit center xxx in Fiscal Year 2010". I have checked the period is correct and profit center is active.
Please help.. why the profit center is missing?
Thanks
Pauline

Hi,
Check transaction 1KEF whether online posting of profit center document is maintained for current year or not.
Regards,
Sreekanth

Missing Connection Types in Report Data Source Properties

I am running three installations of SharePoint 2013 with SQL 2012 for Business Intelligence, with Kerberos working.
I have been having intermittent issues with SQL Reporting Services in a multi-server configuration, but finally had it working in all three environments. We discovered many of our issues were caused by master page customizations which we have now disabled
temporarily while we work on function issues.
However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened. Most everything appears to still be working, except Reporting Services. I have verified that features are enabled
in both the farm and the site collection, as well as insured managed content types are being allowed on the target document libraries. I also verified the Reporting Service properties and database connections. However, I have found two clear symptoms
which I can find no other information regarding (in logs or in online searches):
1) If we try to create a new "Report Data Source" using the SharePoint UI, it will open a new Data Source Properties window, but in the "Data Source Type" field, there are no values available for me to select my connection type (e.g.,
Microsoft SQL Server).
2) In Central Administration, while administering the Reporting Services Service Application, I can manage a majority of the settings, including System Settings, Manage Jobs, Key Management, etc. However, if I click on the link for "E-mail Settings,"
I get the dreaded "Sorry Something went wrong screen," with an error saying that "Object reference is not set to an instance of an object."
So I am hoping someone has an idea of where I can look for additional information on this issue, or even better, knows what I am missing to get Reporting Services functional again in this environment!
Thanks in advance for any help provided.
Elohir

However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.
Hi Elohir,
I assume you are installing Reporting Services SharePoint mode for SharePoint 2013, you need to:
1. Install "Reporting Services – SharePoint" and "Reporting Services add-in for SharePoint Products" on the SharePoint server that the SSRS service will run on. All other SP servers only need the "Reporting Services
add-in for SharePoint Products."
2. Run the Insall-SPRSService and Install-SPRSServiceProxy on Central Admin and SSRS server.
3. Start SSRS Service only on desired SSRS servers.
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Since the issue occurs only to one of the environments, please provide more information about your multi-server configuration, and point out the server where the issue occurs.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

User Analysis at Permission Level - Detail Report (RAR SP12)

Hello All,
I have having question regarding the User Level Analysis at Permission level report. Currently, we are on GRC Access control 5.3 SP12.
Per my understanding when you execute the User level analysis at Action level, you get SOD conflict reports based on T-code level and not on authorization / permission level. But, if you execute the user level analysis at permission level then SOD report is based on the authorization / permission object level.
But now, when I execute the user level analysis at PERMISSION LEVEL in the Informer tab, in the report I am only able to see "Transaction Code Check at Transaction Start" name in the Permission Object Column and "Transaction Code" name in the Field column.
Look forward to hear from you all.
Thanks in advance,
Regards,
Angelica

Hi Angelica,
This behaviour is ok for those risks in which you have not enabled any Object/Field value. It will pick S_TCODE Object and show you the risk.
This is useful because -
1. If you have risks defiend at Tcode level - you can still catch them while running risk analysis at permission level.
2. If you have Object Values defined in risk and you are running permission level analysis it will show risk only if Object Values meet. In that case permission level risk anlysis will not show risk if there is no actual risk.
3. Running risk analysis at Action level can show false positives when risk is defined ta Object level. So, it is always better to r
un alanysis at permission level, it will bring all actual risks skipping false positives.
4. You can run only one level risk analysis in CUP and ERM and permission level covers all risks.
If you have risk defined at Object Level and the role/user is not fulfilling all values, it should not show in permission level. In your case, if it is showing only "Transaction code check at start" and the risk is defined at Object Level, then sure it is a bug.
Regards,
Sabita

How to analyse a problem in BI ( Example missing Data in a report )

Hello;
What is the best procedure to analyse a problem missing data in BW. the question could be unclear but I am looking for a method to determine directly and without taking long time in follwing the dataflow to be able to say that we have a problem getting a field A ou B.
Regards
Anis

Hi Anis,
you can debug data flow or let's say specific data load between 2 objects e.g. datasource and DSO or DSO an cube etc... you can track down e.g. like specific sales order was loaded e.g some specific field is treated within the load (e.g. in case there is ABAP routine used). However it is always better to start either from:
top->bottom = report->datasource (source table or extractor checked)
or
bottom->top = datasource->report
and go layer by layer (or infoprovider by inforprovider) to see if particular value is still there.
cheers
m./

Report data ( value ... tag) missing in the Webi report retrieved through RestFul Webservice

I am trying the below URL to get the WEBi report from SAP BO using the Rest Webservice support that is now available.
http://{serverIP:serverPort}/biprws/raylight/v1/documents/{documentId}
I am able to get the report but as I compare the same report response when using SAOP Webservice, there seems to be a mismatch in the response. Here is what I see in the SOAP response:
</td><td c="1" ><cell ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" sid="-10"><ct >Some arbitrary value</ct><value type="xs:string">Some arbitrary value</value></cell>
But when I run it through REST, I am missing the <value ..> tag:
</td><td c="1" ><cell ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" bt="1" sid="-10"><ct >Some arbitrary value</ct></cell>
Apart from this right at the start of the xml response, I see some property mismatch as well.
SOAP has this property extra:
<property name="output.format.xml.valuemode">yes</property>
While REST has these property extra:
<property name="output.format.xml.option.style">1</property>
<property name="output.format.xml.styledict.fontplatform">html</property>
<property name="output.format.xml.td.bandinfo">yes</property>
<property name="source.selected">data</property>
<property name="xelement.xml.object">yes</property>
<property name="xelement.xml.object.usemap">yes</property>
<property name="xelement.xml.object.usersupportedformat">image/png</property>
I am not sure if:
the <value ...> tag miss is because of these missing/extra properties or
current REST support has some issues
For my application the value tag is a must and I can't do without this, but with REST it seems no way to obtain that.
Any help or pointer(s) in this regard is appreciated!

Hello Milind,
According to our Product Owner Sam Polichouk, the solution should be available for you in 4.1 SP3, which is currently scheduled for release by the end of March 2014 (subject to change). The product team recommends that you get the raw, unformatted data values from within the Dataset specific call. This data contains a type to tell the end user what kind of data it is, so you can format it or use it properly.
The updated documentation for the SDK will be available at SAP BusinessObjects Business Intelligence platform 4.1 – SAP Help Portal Page once the Support Pack is publicly released.

Iterate through XML find the missing element and prepare report

Hi',
I am reading a XML and if the ID is missing in that XML, then I have to make a report which can be send by mail
by telling that these are the name for which ID is not present.
I am able to iterate through the records and check if the ID is not present and pick the names for that,
What I am not getting is how to put these names in a proper format.
Like if I copy then each time the variable will be overwritten, if I use a append then a full new XML gets created.
Please tell me how I can make a proper report.
Thanks
Yatan
<Records>
<Employee>
<name>Yatan</name>
<ID></ID>
<Age>28</Age>
</Employee>
<Employee>
<name>Yagya</name>
<ID>101</ID>
<Age>27</Age>
</Employee><Employee>
<name>Yugansh</name>
<ID></ID>
<Age>24</Age>
</Employee>
</Records>

What about you do a XSLT transformation to get the email content in HTML format... That would avoid you to iterate through your XML...
The template would be like this:
<xsl:template match="/">
 <h2>These are the employees without ID</h2>
 <xsl:for-each select="/Records/Employee[ID = '']">
 <xsl:value-of select="name"/>
 
 </xsl:for-each>
</xsl:template>This is just a sample, syntax was not verified, but I think you'll get the idea...
Please let me know if this was helpful...
Cheers,
Vlad

Missing Menu on Crystal Report OEM Version XI

File/View/ Edit Menu Missing in Crystal Report OEM Version XI. Unable to access with short cut keys. Shows the menu when program starts, lose the menu when I open any reports (even samples)

Christine, if you are asking about the actual CR Designer, please post the query to the Crystal Reports Design Forum:
SAP Crystal Reports
Ludek

Missing permission on DPM Report

Similar Messages

Maybe you are looking for