Missing phones - disconnected time?

Hi,
I have a problem, 3 phones are missing so i need to determine when phones was disconnected. I have CallManager 7.1.5 and missing phone are cisco 7911 (i have phone serials and mac address). Phones are using SCCP protocol.
Please help,
Regards,
Ivan

If you have RTMT check this link or you can read this thread.
Thanks
Manish

Similar Messages

Why does my phone disconnect after 4 hours of call time

why does my phone disconnect after 4 hours of call time? Is there anyway I can change this?

You mean that you're on a single call for 4 hours continously, and then it disconnects?
If so, contact your wireless carrier. That's a cellular connection issue.

Phone disconnected/audio disconnected phone connected/audio connected

Since the update, my 2014 toyota corolla intermittently says phone disconnected/audio disconnected then phone connected/audio connected. Sometimes I have actually been on the phone when this happens, my calls drops and then reconnects again as if nothing happened. I miss parts of the conversastions, one time it was actually a really important call that I was taking.

Yes, Sky did raise the fault with BT and they stated it was a disconnected line.
the reason was that another phone line was connected. they told them to correct the mistake as was told it was not a mistake as it was a disconnected line.
5 hours of phone calls later to Sky and BT and the best a Sky technical Manager could offer was to reconnect with a new number for free (no 120 pound charge) still waiting for the 2 week wait for a phone number. Then I will need to wait another 4 days for internet.
4 weeks lost in phone and internet usage becaue of an engineer error and then another error in not being able to correct a fault correctly.

6110 - 1 or more alarms missed due to time change

Wheneevr Is et a calendar alarm it does not go off, but instead, when I check the calensdar, I get the "1 or more alarms missed due to time change" message.
Now - the time has not changed (other than to increment by the second as one would expect); the time is not being updated by my network provider (this option is disabled by default), so what is the problem?
How can I avoid this? Does the calendar alarm function actually work?
[Latest 3.58 firmware, phone was reformatted with the new firmware too]Message Edited by 6110nav on 29-Aug-200701:06 PM

I can create this error on demand on my 6120 Classic. Very easy:
1) Enter the calender mode.
2) Delete all entries and alarms before current date (just for the purposes of ensuring there are actually no alarms that could have been missed).
3) Enter a new alarm today, say 2 hours from now. Set the alarm to go off 1 hour from now (the times can be anything in the future, so long as you can complete the rest of these steps before the alarm should go off).
4) Turn the phone off.
5) Turn the phone on.
6) Enter the calender > "1 or more alarms missed due to time change"
If you create the meeting with no alarm, you don't get the error. If you create a memo or any of the other calender entry types, you don't get it. You get the error with the steps above and NO other entries in the calender. It is independent of using "network operator time" and independant of any of the "sync" options for the reminder. I have on occasion have the error come up without having to restart the phone, but I believe that was when the day has gone from yesterday to today with an alarm set to go off today, and it'll show the error the very next time you enter the calender in this situation.
I went to the place I bought my phone and asked for a free swap (seeing as I bought the phone within 30 days), and the new phone did exactly the same, first time. I kept the old one, and will be giving it to the local Nokia Care shop tomorrow. WHEN (not if!) they can't fix it (seeing as I have the latest firmware, and even another brand new phone did the same error in 10 seconds flat), Nokia will have to make a new firmware! Hopefully you guys with the 6110 can recreate the error in this exact same way - I assume yours run on S60 too.

I mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

i mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

Itunes fails to recognize my phone and wants me to load as 'new phone' each time I hook up. I have disabled firewalls and it will recognize one out of five times. It also attempts to sync but just runs forever, then gives error message 0xE8004006

Itunes does not recognize Iphone. It asks me to restore or add as new phone each time I sign on. It then attempts to sync, just runs forever. After five tries, it allowed me to upgrade OS, but still refused to complete a sync. I have disabled firewalls. Error message 0xE8004006
Thanks

https://discussions.apple.com/thread/2482232?start=0&tstart=0

Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed

HI,
I am using V11.1.2.2 Hyperion Planning. I am currently getting an error:
Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed
This is what i got when i tried to add alternate hierarchy to my shared dimension. I tried to delete it and it messed up.
NOw it wont deploy my application.
Can any one suggest.
Thanks in advance
Cheers,
XXX

EPMA!!!!! EPMA!!!!
I'm playing around with it to write a blog post and it is crazy. Only possible workaround (till now i'm not able to figure out a solution to it) is to copy the application and deploy it as a new one. Take copy of all objects (forms, tasklist etc). Delete the corrupted application and rename the new one to old.
Regards
Celvin
http://www.orahyplabs.com

SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

Dear Sir,
During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
1.PO
2. GR with excise capture& post here Part-I&II are genarated.
3.Invoice
4.Return delivery with reference to above goods receipt document.(122 m.type)
5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
JTAX Access sequence missing at the time of excise invoice creation in J1IS

The same error coming while consignment stock issue to cost center.
1.Consignment Info record with excise tax code.
2.PO consignment purchase order.
3.GR with excise capture & post here Part-I&II documents are created.
Material document created but there is no accounting document.
4.While doing Consignment stock issue to cost center system generate an error message
Access sequence JTAX missing ( ) Message no. VE306"

TS1368 My child has put in the wrong password on my phone multiple times, my iPhone now says "iPhone is disabled connect to iTunes", But when I try to connect to iTunes on my laptop it says unable to connect due to a password is on the phone? What do I do

My child has put in the wrong password on my phone multiple times, my iPhone now say "iPhone has been disabled connect to iTunes" When I hook my phone up to iTunes, iTunes then says that my iPhone can not be hooked up to iTunes because it has a password on it, but will not allow me to put in a password because the disabled message is still showing. What is the next step?

You may need to put the iPhone into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the phone and restore/resync your content to it.

I recently upgraded my iPhone 4 with iOS 5 and ICloud. My Contact information is missing phone numbers. What is my fix?

I recently upgraded my iPhone 4 with iOS 5 and ICloud. My Contact information is missing phone numbers. What is my fix?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

Hello Angelcasper,
Welcome to Apple Support Communities.
The following article provides some suggestions on importing photos from your iOS device to your computer.
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Regards,
Jeff D.

Hello. After updating to version 7.0.2 was not on the phone face time application why?

Hello. After updating to version 7.0.2 was not on the phone face time application why?

If your phone was originally sold in KSA or UAE, facetime is permanently removed from it. If you are in one of those countries, and your friends have facetime on their phones, then they were originally sold in a different country.

Libjil.iso missing during run time?

Hi all,
I am new one to jes. I setup jes in Raspbian on Raspberry machine. libjil.iso is missing during run time. Please help me how to resolve the issue.
Thanks a lot.

try to adjust ur repeating fram which prints ur data in ur report.
some of ur data overlaping that's y it cannot display . most of the time character mode reports generate this error. simply adjust ur repeating fram up and down where it fits u problem will solve.
tnx.

I-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

Are you restoring as new?

HT5467 Can you turn on location services remotely to find a missing phone?

Can you turn on location services remotely to find a missing phone?

No. The Find My iPhone service can only be used if it was set up and active, with location services enabled, before the iPhone is lost.

Missing phones - disconnected time?

Similar Messages

Maybe you are looking for