Missing photos when printing to pdf or an HP LaserJet CP1515n

I have Aperture 2.1 running on an iMAC 3.06 24".
I have assembled my first Book with a view to printing it and then Binding it (Apple do not provide the online ordering facility for books for most countries worldwide, but that's another frustrating story for another day....).
After completing the book I tried printing and only the template appeared with borders showing where the pictures should be. I tried printing to pdf, as I thought there must be an issue with the printer interface, but I found the same issue.
I then went through all of the pictures in my Snapshots Theme (71 in total) and "brought them forward" with the "+1" tab. I printed to pdf again and this time the pictures were shown. I then did some further edits on a few pictures, and boldly (thinking that all was OK) started a print job with Manual Duplexing. But lo and behold, the template printed without the pictures once more.
It isn't obvious to me what I am doing wrong or whether there is a bug. Your help here would be greatly appreciated. Thanks in advance.

For anyone interested in my noted problem, through trial and error I have found that the issue does not appear to be with the Laser Printer - it is with the ColorSync Profile settings. I have chosen to lighten the images printed using "Lightness Increase", but I have since discovered that the problem is there with any profile other than "System Managed".
The interesting point is that if you print an image and change the ColorSync Profile to "Lightness Increase" then the photo prints perfectly. The problem is firmly with printing Books. When you change the ColorSync Profile to "Lightness Increase" here, then photos are not shown on top of the backing templates such as "Snapshot".
It is confirmed that the problem can be presented in the Preview mode without even selecting a Printer. This appears to be a software bug that I do not yet have a workaround for - if I do get one, or someone figures it out for me, please let me know.
Incidentally, in my search to point fingers at my new HP CP1515n, a new Firmware version is required if the firmware is older March 2008. My firmware is dated December 2007, but when I tried to load the new version, it was rejected on the basis that I am running Mac OS X later than 10.4.x......!
Come on HP - you can do better than that surely. Whatever happened to "or the latest OS"?
I hope this helps someone who may be experiencing similar issues.

Similar Messages

Missing images when printing to pdf from Word

When printing to pdf from MS Word 2003 in some cases textboxes and/or images disappear in the target PDF, depending on their position.
Word and Acrobat Standard are the latest updates. If the Word text is converted on a Mac the target pdf has the images present, so it looks like it's a Windows only problem. Any suggestions where to start looking for a fix?

You may have to turn on "display large images" in the preferences.

Missing bookmarks when printing to PDF (from Word 2003)

When I want to convert my word-document I first used the "convert to Adobe PDF button" that is shown in the top bar in Word. However each time i used this, it was creating failures making Word shut down. So I decided to try and use the Print to option and the instead of a printer select the Adobe PDF driver. This is working great for except for the fact that it does not
add bookmarks to the PDF-file were (if it works) the Convert to PDF methode did. This is also set in the Adobe Acrobat preferences under Convert To PDF, only it does not work when using printing to the Adobe PDF driver. Anyone know how to solve this?
I'm using Word 2003 SP3 and Adobe Scrobat Professional 8.1.2.
greets sjaaky

THanks for the quick answer, I disabled the accessibility but unfortunantly it didn't resolve the problem. I get this error:
AppName: winword.exe AppVer: 11.0.8202.0 AppStamp:47420667
ModName: winword.exe ModVer: 11.0.8202.0 ModStamp:47420667
fDebug: 0 Offset: 00801e16
greets Sjaak

Objects missing when exporting to PDF, but show up when printing to PDF

Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine if we recreate each individual object, but that can end up being a lot of work. She prefers to export to PDF because of quality. I'm drawing a blank on this one!
The attached file shows the issue. The green blocks just don't want to show up when exporting.

Peter -
The links are just the PDFs of the black and white portions and don't really matter too much since they show up fine when exporting or printing to PDF. Our main concern is the green blocks, which are indeed the green areas of the plan you pointed out. They are actually separate objects created directly within InDesign that can be moved and adjusted.
I just updated to 6.0.4 and that didn't help. I wonder if this may be a variant of the bugs I was reading about with master pages and certain things not showing up when creating PDFs or printing (even though none of these things are on the master page)?
Thanks

I'm trying to print a pdf I created and posted on my website, it looks good online but is missing data when printed, help.

I'm trying to print a poster I created and posted on my website, it was created in power point, saved as pdf, and uploaded using wordpress. It looks good online but is missing data when printed. It contains almost all the information except for about 6 lines, which happen to be important. Any thought are appreciated.

No its weird, everything was the same. I sort of resolved it, since he can view the PDF fine on his comupter but also wanted to print it, I just exported all the slides as JPEGS and made a new InDesign book with those on the pages and exported that as a PDF. Seemed to work for him, I just don't know what happened!

Characters missing when printing a PDF

Hi all,
When printing a PDF file (word document converted and digitally signed with Adobe Pro XI) some characters are not printed, they are as blank spaces. The workaround is to print the file as image, with a significant decrease of printing quality. Is there any setting or option to change to avoid this?

If as in the past, this is an issue with an HP print driver. Printing as image is generally the solution, but a lot slower I think.

Problem with page breaks in IE when printing to PDF

Hey,
I am having formatting issues with IE when printing to pdf, I have a dynamically created report which has page breaks at the end of each page, if I open this report(report is in html) in firefox and goto print the formatting is correct, if I open the same report in IE and print the report 80% of the pagebreaks are in tact, 20% are ignored which just makes the report look rubbish, my question is,( I know it not directly related to the reader but was unsure on which forum to post) is there a different css or formatting I should use to make IE play ball.
Cheers
Tom.
the style I use to insert pagebreak is
<code>
.breakhere {page-break-before: always;}
code I then use to implement it is.
<TABLE BORDER=0 WIDTH=100% CELLSPACING=0 CELLPADDING=0 CLASS="breakhere">
</code>

You may use a forum for IE.

Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
Can anyone help?

Hi Edna,
It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X. Choose Edit > Preferences > General. Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu. Click Apply, then OK.
Restart your computer. Acrobat 9 should now be your default PDF file handler again.
-David

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

When printing to PDF from webpage, the pdf is compressed on the bottom of each page and markedly smaller print. How do I correct this?

When printing to PDF from webpage, the pdf is compressed on the bottom of each page and with markedly smaller print, the top of the page is fine. How do I correct this?

Open Contacts and click Preferences on the menu named Contacts. On the General tab of the Preferences window, select Show First Name: Before Last Name and then print. You can change that Preference back to the other way after printing if desired.

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

Bad crash when printing to pdf in Morningstar software - is it a 64 bit problem?

Had bad crash when printing to pdf in Morningstar Principia Pro software - is it a 64 bit compatability problem? All other software I have can print
to Acrobat pdf, but in Morningstar the Window 7 PC freezes and not even Task manager can
unfreeze the computer. Acrobat worked fine in my old XP 32 bit PC when printing from Morningstar. Recently a webinar using
an Adobe webinar software I was told I must only use a 32 bit browser, so I suspect Acrobat is incompaitble with my new 64 bit PC. Work around solution is to print to Microsoft XPS and then convert to Acrobat but I want to use Acrobat only! Is there a patch for people using 64 bit PCs?
Can someone at Adobe respond to me, please? I have used Acrobat for over 10 years and am very loyal.

Michael: I have tested other programs ability to print to Acrobat and also tested ability for other programs to
export to Excel or Word. The only crash is when printing an Acrobat pdf from Morningstar Principia Pro I get a bad crash. The work around is to print to XPS and then convert the XPS file to Acrobat pdf. To get out of the crash which can't be fixed by Windows Task Manager shut down, is to open the printer file and tell the printer to delete the pending print job.
I'm using latest Version 9.3.4 Standard Acrobat; Win 7 Pro 64 bit, 10 g of RAM, HPE 390t standalone PC, no networking.

PDFMaker changes page orientation when printing to pdf

Hi all! I am praying for an answer. My job requires me to convert huge word documents to pdf using the pdfmaker add-in with acrobat Professional 8.1.3. My problem is as follows and has occured in two seperate documents. I have Microsoft word 2007 and run on a VIsta OS.
   So my problem is when I create a pdf from word acrobat for some odd reason changes any page's orientation that contain excel spreadsheets that have been inserted (I believe through copy and paste and they are not linked to excel). Thus I get a page with a landscape spreadsheet with a profile orientation and it cuts off the information for my client. By the way, it does the complete opposite of whatever orientation I choose.
   Here are some things I have tried: I tried saving document as a 97-2003 word file and create pdf from that version, I have changed the PDFmaker advanced settings for auto-rotate pages and tried all three options to no avail. I really need some help fast! I will love anyone who solves this problem for me.
Thanks,
       Jason.

GREAT NEWS!!! I FIGURED IT OUT!!!!
Okay so after a lot of frustration and mountain dew I have figured this out, but first the problem is simpler then I listed it. So here is the actual problem:
I had a document with multiple sections and one section was oriented landscape while the rest were profile. When printing to PDF the resulting pdf file had all sections in profile and ignored any change in orientation and cut off/cropped out elements of the pages I had in landscape orientation.
SOLUTION:
The solution to this problem is in two parts: 1) changing some print preview stuff in word, and 2) changing preferences in pdfmaker/acrobat ribbon.For this solution to actually work however you must have the landscaped sections sectioned off by inserting section breaks in word.
Step 1) Go to the section where you document orientation is changed from the rest of the document. Press the office button (in 2007) and drag down to print>print preview. You will notice that your section has now reverted to profile. (Ah Ha!) Change the page orientation to landscape.
            "But wait, now my margins or elements are getting cut off" you say. Go to Page setup. Make sure that near the bottom it says "Apply to: This section"
            Now make it landscape and this changes the margins to also be landscape.
Step 2) Click on your Acrobat tab and go to preferences. Under pdfmaker settings click advanced settings and as Bill and I have said change auto-rotate pages to individually.
AND YOU ARE DONE!!!!!

When printing to PDF Acrobat locks up at spooling

Running Windows XP and Office 2007 and Arcobat 8 (with most recent web updated)
When printing to PDF from any program (Word, Excel, Quickbooks, even Acrobat), the creating PDF window locks up and the print job gets stuck at the spooling status. No errors are displayed, I'm unable to cancel anything. Seemed to start happening after downloading the latest updates.
Have tried to repair installation 3 times, reinstalled program 2 times, with no sucess. Have run this version for over three months with no issues beforehand.
Help!!!!

AcroTray is running in background.
Thanks, will try that. Just have to work out Word settings so the conversion is seamless. Word tends to drop images and such when I do that.
In the interim, I've downloaded the CutePDF driver and all seems to be working. Ultimately the issue seems to lie with the PDF driver provided by Acrobat, but no matter how many times I reinstall the driver I still get the same problem.

Missing photos when printing to pdf or an HP LaserJet CP1515n

Similar Messages

Maybe you are looking for