Missing Plug ins after successful install

In Design is missing plugins after what seems like a successful install. Other Downloads are OK ( Photoshop Lightroom ) I've tried uninstalling and re-installing sevaral times same outcome....Fisrt looks for JBX then others. Will launch but missing tolls and other things from the programe.
MacBook Pro. OSX 10.9.2
This happened after I installed a new SSD with the existing Harddrive wiped and used for data. Everything esle working fine.

Please continue this thread at http://forums.adobe.com/message/6320865.

Similar Messages

  • Missing plug-ins after downloading adobe flash player 11.2.202.235

    Hello again:
    I sent a request the other day for help regarding my downloading Adobe Flash Player 11.2.202.235 and losing the ability to play my games( they were bookmarked from the web) because of missing plug- ins.  I mentioned that I know very little about this computer.  I did get a reply saying that he needed more information about my computer which I sent and I have not heard anything back.  I probably did not send the message correctly therefore I am sending the info again and I hope I don't screw it up this time. My computer is as follows:
    iMac4,1 Version 10.6.8
    Intel core duo
    2GHz
    # of processors 1
    Total # of Cores 2
    L2 Cache 2MB
    Memory 1.5GB
    Bus Speed 667 MHZ DDR2SDRAM
    BootRom Version 1M41.0055.B08
    SMC Version(system) 1.1F5
    I hope you can help me in the simplest way possible so I can understand your instructions.
    Thanks again,
    Margaret

    It's confusing when a single poster starts two threads on the same topic and it divides the replies or has duplicate replies for those that are unware of the other thread.  You should post the above in the thread you originally started after my post which asked for some clearification on the problem.

  • Illustrator 4 missing plug-ins after updating to yosemite

    I am a freelance illustrator and use illustrator 4 everyday. I recently updated my mac to OS X Yosemite, now i find that whenever i open a file created in illustrator that has a bitmap tif from photoshop placed in it comes up with the error message "could not find a plug-in to read the linked file "xxx.tif",choose repair to locate the missing file" when i try to repair the missing psd file it is greyed out or unlinkable. is there a solution for this?, i've tried a few things but nothing works.

    puddlejumper,
    What happens if you close down Illy, open Photoshop, and then open Illy ad try again?

  • I can't see Massive as an Audio Unit plug-in after successful install

    The Audio Units Manager shows Massive as "successfully validated", but when I click on an empty Insert, it doesn't list Massive anywhere as an plug-in.
    I am using:
    Mac OS X Version 10.6.8
    Massive 1.3.0 (R2050)
    Logic Pro 9.1.6
    All purchased legally.
    Please help!

    figured it out

  • Missing plug-ins after upgrade

    I've just upgraded from Logic Pro 6.4 to 7.2, and there seem to be no plugins available. Not only are the ones I used in 6.4 gone (EXS24 and E2 especially), but none of the new ones advertised on the box can be accessed. Help!
    Thanks,
    fleepish

    Have you selected your current audio driver under "Audio Hardware and Drivers"? Or did you run the Set-up assistant?
    Have you switched systems (meaning computer, and operating system), or simply upgraded to Logic 7?

  • Missing Plug-ins issue (CS6)

    Hi all, I have upgraded from CS5 to CS6 and ever since then, I have had issues with missing plug-ins. Every file I open pops up with a message that it has missing plug-ins and when I want to package the file, it say's that "the document cannot be packaged due to missing plug-ins. Please install or activate these plug-ins: XMPBackEnd7.InDesignPlugin."
    I am unsure what to do with this and how to go about activating/installing the correct plug-in for CS6
    If anyone coul help me that would be great!

    It sounds like you probably had a plugin from XMPie installed in CS5. If you need that functionality you'll need to install in CS6 as well.

  • Adobe flash player will not install. When asked to install missing plug ins, nothing comes up.

    I go to install adobe flash player and nothing comes up. Firefox says I need to install missing plug ins, but when I go to install the missing plug ins, nothing comes up. Says something about doing it manually. I don't know what that is.

    You can download the manual installers and run them to install Flash. Details are shown in the Adobe troubleshooting guide - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

  • After Effects PLUG-INS WON'T Install

    After Effects CS5 64-bit PLUG-INS WON'T Install..
    Pls help me... I know how to install plug-ins.. Just paste the File or Folder that i downloaded to C:\Program Files (x86)\AdobeCreativeSuite5\After effects\Support files\ Plug-ins.But After that I open After Effects and in Effects panel none of the plug-ins show. all the forum saying this.. But i already try it many time . even resetting the PC or AE.. I really need the Plug-ins so please anyone reply..
    Its sad that my other Question about Adobe media Player in this site no one answered it. anyway All the plug-ins that i buyed and download are saying the same procedure. that i said earlier,  just to copy and paste. but none of the readme file correct.

    >  I know how to install plug-ins.. Just paste the File or Folder that i
    downloaded to C:\Program Files (x86)\AdobeCreativeSuite5\After
    effects\Support files\ Plug-ins.
    That's the wrong path.
    This is the right path (as provided in "Plug-ins"):
    C:\Program Files\Adobe\Adobe After Effects CS5\Support Files\Plug-ins
    > Its sad that my other Question about Adobe media Player in this site no one answered it.
    You didn't ask such a question here in the After Effects forum. I don't know what question you're talking about.

  • Suddenly getting "Missing Plug-Ins" errors when opening .indd files in InDesign CS2

    I have a PC running Windows 7 and InDesign CS2. The laptop's installation of Windows was corrupted and I had to re-install the OS. I backed up all files, reinstalled the OS, and then reinstalled applications. One of those applications was InDesign CS2. However, after the installation of CS2 on the fresh copy of Windows, I noticed that I have trouble opening most, but not all, of the InDesign files on my hard drive.
    When I try to open a .indd file I see an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. Under that list of missing plugins is the warning "This document uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"  If I click "okay" I then am met with another dialog box that says "Cannot open file. TEXT.RPLN, LAYER.RPLN" and on and on for about 60 more items.
    I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility. Never have I used a newer version of InDesign. The files that I am working on were backed up, stored on local storage and not touched once before reinstalling the OS and reinstalling InDesign CS2.
    I also noticed that not all InDesign file formats were associated with InDesign in "Windows Programs and Defaults." I changed those to look to InDesign. I've also uninstalled InDesign CS2 and re-installed.
    Not all InDesign CS2 files are exhibiting this behavior. So far, it appears more than half are, but some can be opened with no problems. There seems to be no correlation between which ones are able to be opened and which ones can't be opened.
    What could have happened to these files and is there any possibility of opened them again? Any guidance is greatly appreciated.

    [Jongware] wrote:
    Nonapeptide wrote:
    ...  an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. ... 
    I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility.
    Conditional Text was a new feature in CS4. I'm thinking, can you explain how your old CS2 documents became aware of it?
    Not exactly sure myself. Abiogenesis?
    [Edit]
    Almost forgot. I wrote a script to unequivocally determine the InDesign version a document was last saved as:
    http://forums.adobe.com/message/4071273
    I'll give that a try today. Even an affirmative judgement that the files are newer than CS2 would not impress me however. The fact remains, the files were copied off one hard drive over to another, the plug was pulled on the hard drive, the PC was re-imaged, CS2 was reinstalled, the files were copied back over... and whammo.

  • Missing plug-ins,  BRS Pencil Tool  ExpandS

    When I launch Illustrator after instalation, I get this message "missing plug-ins, BRS Pencil Tool ExpandS". I searched about it and found these http://forums.adobe.com/message/3079536?tstart=0, http://kb2.adobe.com/cps/331/331889.html#products, http://www.adobe.com/support/contact/cs5clean.html, but nothing helped. I tried the solutions offered at these threads, but in vain. Does anybody have an idea about this? Thanx a lot.

    This happens in Windows XP. In Windows 7 (I tried it) installs with no problem.

  • PDF files won't display. Error message "Missing Plug-ins"

    Hello. I am having trouble with adobe reader but only certain files. When I first signed up for school in may Adobe Flash Player and Adobe Reader were required and when I did the check plug-ins system check, both were installed and running just fine. Just in the past 2 days is the check plug-ins test saying Adobe reader is not installed. I have tried un-installing and re-installing but still saying it is not installed. I'm not having troubl with all adobe reader files. I'm an online student and my e-books are opening and displaying just fine. Also my pdf documents saved on my computer are opening just fine. When I try to view a websites brochure, a websites sale paper, or maybe open up an article, the page pops up but the image won't display. It keeps saying "missing Plug-ins". I have a MAC 10.6.8. running on Safari and I have downloaded Adobe Reader 10.1.0. I need to be able to open up articles because I'm doing a homework assignment that requires one. If u can help in any way, please do.

    I've tried all the fixes listed in the discussions about missing plug-ins in Mail.  None of them worked.  I can see attachements in the emails, but when I forward them, the missing plug-in shows up in place of the attachments on the forwarded email.  I'm running the latest OS 10.7 on my Mac Pro and I just downloaded the latest Java app.  HELP!!

  • Missing plug-ins error

    Hello everyone,
    I am attempting to open an InDesign document that a client sent me and I keep getting missing plug in errors. I am using Indesign Cs5 on a Mac with Os 10.6. I have run into this issue before when trying to open files made on older versions of InDesign so I attempted to open the file with both Cs3 and Cs4 without any luck. Is there some where I can down load the missing plugins so I can view this file? If it helps at all the error I recieve is "Missing Plug-ins Shared Content.InDesign plugin", I scenerly hope I dont have to update to cs5.5 after only having cs5 for a year.

    It’s a CS5.5 file.
    If you upgrade to CS5.5 now you’ll get CS6 for free.
    Bob

  • Mail missing plug-ins

    OK, strange one here.  I have several clients (Lion and Mountain Lion) that get the Missing Plug-ins in certain emails using Mail.app.  They are all using Exchange 2010 server, some setup w/ IMAP, others as Exchange server.  I know about the java trick and other things that 'correct' the Missing plugin thing... but this is something entirely different.  I spent a few hours on the phone w/ Rackspace technical support trying to figure out the issue.  As far as i know, all the missing attachments are images (jpg and png is what i've seen so far).  Sometimes these attachments show up on an iOS device, sometime not - just like OSX version.  If you look at the message details in OWA you can see the blocked attachments are replaced w/ https://email. ourcompany.com/owa/UrlBlockedError.aspx path, instead of the usual as shown by the other attachments.  It seems as though Microsoft (in their infinite wisdom) is blocking these attachments for some reason.    BUT... with Outlook 2010 on a Windows PC these attachments come through just fine.  Even Outlook 2011 for Mac is a little better in that it may show one or two other attachments, but Mail.app or Outlook.app neither show ALL of the attachments -- but a plain, vanilla, Outlook for Windows shows them all no problem. 
    Does anybody have anything to add to this?  The email ISP couldn't come up w/ any block list that can be changed, any other ideas, etc... I'm thinking I am going to have to call Microsoft which I really don't want to do.  It takes an hour to bring somebody up to speed as to where i am...  
    Let me know, TIA. -- PetieG

    This seems to be a known issue affecting a few people. I don't know what causes it. For a possible fix, see this thread:
    Installed Lion & now can't see mail...: Apple Support Communities

  • HELP.. illustrator cs6 is not working.... missing plug ins???

    Hi, HELP!!!! I have an issue with my illustrator cs6 version as when I am trying to open work which I have worked on, on my computer it is now saying that I have missing plug ins, PDF???? and will not let me open anything??? PLEASE can you help, I am mid way thorugh a project and need to work on the programme now... thank you so much for all your help..

    restart your computer.
    if that doesn't solve the problem, re-install illustrator over your current installation.

  • Newly created InDesign 5.5 file missing plug-ins, can't open now

    How can I open an InDesign 5.5 file that says it's missing plug ins and won't open, when I just opened and created the file last week?

    When I try to open a CS6 file in CS5.5, I get the error message:
    The way to generate this other message:
    is to try to open something that InDesign can't open. This is sometimes an InDesign file that is corrupt. Once I found poorly configured backup software keeping files open. In other cases I've had clients hand off files that were supposed to be InDesign files but turned out to be renamed zipfiles or PDF files or Word files (all of which fall under the "may not support the file format" statement above). You've already ruled out it being open elsewhere by searching for .idlk files, and you've ruled out plugin issues already (by not having a CS6 file generate the new "because it was saved with a newer version" message, and chances that you've installed some kind of plugin that ), so it almost has to be a file that is broken or misnamed in some way.

Maybe you are looking for