Missing plug-ins after upgrade

I've just upgraded from Logic Pro 6.4 to 7.2, and there seem to be no plugins available. Not only are the ones I used in 6.4 gone (EXS24 and E2 especially), but none of the new ones advertised on the box can be accessed. Help!
Thanks,
fleepish

Have you selected your current audio driver under "Audio Hardware and Drivers"? Or did you run the Set-up assistant?
Have you switched systems (meaning computer, and operating system), or simply upgraded to Logic 7?

Similar Messages

Missing plug-ins after downloading adobe flash player 11.2.202.235

Hello again:
I sent a request the other day for help regarding my downloading Adobe Flash Player 11.2.202.235 and losing the ability to play my games( they were bookmarked from the web) because of missing plug- ins. I mentioned that I know very little about this computer. I did get a reply saying that he needed more information about my computer which I sent and I have not heard anything back. I probably did not send the message correctly therefore I am sending the info again and I hope I don't screw it up this time. My computer is as follows:
iMac4,1 Version 10.6.8
Intel core duo
2GHz
# of processors 1
Total # of Cores 2
L2 Cache 2MB
Memory 1.5GB
Bus Speed 667 MHZ DDR2SDRAM
BootRom Version 1M41.0055.B08
SMC Version(system) 1.1F5
I hope you can help me in the simplest way possible so I can understand your instructions.
Thanks again,
Margaret

It's confusing when a single poster starts two threads on the same topic and it divides the replies or has duplicate replies for those that are unware of the other thread. You should post the above in the thread you originally started after my post which asked for some clearification on the problem.

Re-install plug-ins after upgrade to CC

The chief thing holding me back from upgrading to CC is the prospect of installing all of my plug-ins, actions, brushes, etc. again.
When I upgraded from CS5 to CS6, this took days, and proved a major pain. I'd like to upgrade to CC, but not if I have to spend days re-installing plug-ins, fonts, brushes, actions, etc.
Is there a way I can upgrade from CS6 to CC without overwriting all of my stuff? In a dream world, I would download and install CC, and at first start-up, there would be all of my stuff exactly as I had it in CS6. If I can't get this or something like it, it's probably not worth it to upgrade yet.
Thanks for your time and help!
KB

KB the process has not changed. If you use Third-party plug-ins and brushes the process will be the same as you have experienced previously. I would recommend contacting the Third-party plug-in manufacturers to verify they are compatible with the CC versions of the Adobe Creative applications.

Illustrator 4 missing plug-ins after updating to yosemite

I am a freelance illustrator and use illustrator 4 everyday. I recently updated my mac to OS X Yosemite, now i find that whenever i open a file created in illustrator that has a bitmap tif from photoshop placed in it comes up with the error message "could not find a plug-in to read the linked file "xxx.tif",choose repair to locate the missing file" when i try to repair the missing psd file it is greyed out or unlinkable. is there a solution for this?, i've tried a few things but nothing works.

puddlejumper,
What happens if you close down Illy, open Photoshop, and then open Illy ad try again?

Missing Plug ins after successful install

In Design is missing plugins after what seems like a successful install. Other Downloads are OK ( Photoshop Lightroom ) I've tried uninstalling and re-installing sevaral times same outcome....Fisrt looks for JBX then others. Will launch but missing tolls and other things from the programe.
MacBook Pro. OSX 10.9.2
This happened after I installed a new SSD with the existing Harddrive wiped and used for data. Everything esle working fine.

Please continue this thread at http://forums.adobe.com/message/6320865.

Missing plug-ins error

Hello everyone,
I am attempting to open an InDesign document that a client sent me and I keep getting missing plug in errors. I am using Indesign Cs5 on a Mac with Os 10.6. I have run into this issue before when trying to open files made on older versions of InDesign so I attempted to open the file with both Cs3 and Cs4 without any luck. Is there some where I can down load the missing plugins so I can view this file? If it helps at all the error I recieve is "Missing Plug-ins Shared Content.InDesign plugin", I scenerly hope I dont have to update to cs5.5 after only having cs5 for a year.

It’s a CS5.5 file.
If you upgrade to CS5.5 now you’ll get CS6 for free.
Bob

Unable to open documents because of missing plug ins

I am unable to open documents in CS3 (version 5.04)
I am getting a message:"Missing Plug Ins: Conditional Text.InDesignPlugIn, WorldReady.InDesignPlugin.
The document "xxxxx.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"
If I click on OK I get another window, stating "Cannot Open File", a list of all kind of missing Plugins and the message "Cannot open "xxxxx.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
I don't want to switch to CS4 and as far as I know version 5.04 of CS3 is the latest.
Any ideas of what I could do to get the latest PlugINs or anything else that would help?
Thank you!
Anne

Probably, but it's 100% not necessary when going from CS4 to CS3. It might be a case of 'half read, then half-understood'.
As this is a really frequent question and there are still no sticky posts: anyone up for a "feature request" that makes InDesign check the version number before opening? (Of course that wouldn't work backwards to CS3. Still, it'd avoid these kind of posts when CS6 comes out. Note: not CS5, because that would have no problems opening CS4, but CS4 would have problems with Cs5! Oh, for planning ahead ... )

Suddenly getting "Missing Plug-Ins" errors when opening .indd files in InDesign CS2

I have a PC running Windows 7 and InDesign CS2. The laptop's installation of Windows was corrupted and I had to re-install the OS. I backed up all files, reinstalled the OS, and then reinstalled applications. One of those applications was InDesign CS2. However, after the installation of CS2 on the fresh copy of Windows, I noticed that I have trouble opening most, but not all, of the InDesign files on my hard drive.
When I try to open a .indd file I see an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. Under that list of missing plugins is the warning "This document uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?" If I click "okay" I then am met with another dialog box that says "Cannot open file. TEXT.RPLN, LAYER.RPLN" and on and on for about 60 more items.
I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility. Never have I used a newer version of InDesign. The files that I am working on were backed up, stored on local storage and not touched once before reinstalling the OS and reinstalling InDesign CS2.
I also noticed that not all InDesign file formats were associated with InDesign in "Windows Programs and Defaults." I changed those to look to InDesign. I've also uninstalled InDesign CS2 and re-installed.
Not all InDesign CS2 files are exhibiting this behavior. So far, it appears more than half are, but some can be opened with no problems. There seems to be no correlation between which ones are able to be opened and which ones can't be opened.
What could have happened to these files and is there any possibility of opened them again? Any guidance is greatly appreciated.

[Jongware] wrote:
Nonapeptide wrote:
... an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. ...
I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility.
Conditional Text was a new feature in CS4. I'm thinking, can you explain how your old CS2 documents became aware of it?
Not exactly sure myself. Abiogenesis?
[Edit]
Almost forgot. I wrote a script to unequivocally determine the InDesign version a document was last saved as:
http://forums.adobe.com/message/4071273
I'll give that a try today. Even an affirmative judgement that the files are newer than CS2 would not impress me however. The fact remains, the files were copied off one hard drive over to another, the plug was pulled on the hard drive, the PC was re-imaged, CS2 was reinstalled, the files were copied back over... and whammo.

Mail Missing Plug-in after sending; quit and restart Mail fixes it

mail > Missing Plug-in after sending; quit and restart Mail fixes it.
Its very obnoxious after all these years to have Apple Mail continue to complain about Missing Plug-in
This happens for PDFs, .zips, .jpgs and other types.
Any ideas why Apple cannot seem to fix this?

Back up all data.
Boot into Recovery mode. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Illustrator 6 missing plug-ins, won't open new files

I was initially getting an error message when attempting to open Illustrator 6 on my Mac (running 10.6.8). An unknown error has occurred (4294967253). Adobe Illustrator will now quit. I read a post where the user was to select shift+option+command right after booting up. When I did that, a dialog box popped up asking if I'd like to participate in submitting feedback to Adobe and asked for my profession, location, industry, etc. It then attempted to open a new file but gave the following error: The document 'Print.ai' contains elements that are managed by plug-ins that are not currently available. You can delete or expand these elements but you cannot manipulate them in other ways. The missing plug-ins are listed below. Stroke Offset Live Effect (StrokeOffset.aip). I can open an existing file, but no tools are available to edit with and I get additional errors regarding missing plug-ins. My Mac has also been running a bit slow lately as well...not sure if the two issues are connected, but I'm willing to try anything to meet an impending deadline. I have plenty of space remaining on my computer, so that can't be it.

The exact same thing just happened to me.
Then comes another error message ( see below ).
& it doesn't like it when I replace the image (which is a TIFF by the way).

Missing plug-ins, BRS Pencil Tool ExpandS

When I launch Illustrator after instalation, I get this message "missing plug-ins, BRS Pencil Tool ExpandS". I searched about it and found these http://forums.adobe.com/message/3079536?tstart=0, http://kb2.adobe.com/cps/331/331889.html#products, http://www.adobe.com/support/contact/cs5clean.html, but nothing helped. I tried the solutions offered at these threads, but in vain. Does anybody have an idea about this? Thanx a lot.

This happens in Windows XP. In Windows 7 (I tried it) installs with no problem.

Missing Plug ins for 1channel videos

Since I upgraded my mac to mountain lion, I cannot watch movies on 1channel. I get the error Missing plug ins, and cannot seem to download or find the plug in on the website. I believe its DIVix?
I had no problems prior to my upgrade.
Any tips?
thanks!

You probably need the following:
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

Missing Plug-ins issue (CS6)

Hi all, I have upgraded from CS5 to CS6 and ever since then, I have had issues with missing plug-ins. Every file I open pops up with a message that it has missing plug-ins and when I want to package the file, it say's that "the document cannot be packaged due to missing plug-ins. Please install or activate these plug-ins: XMPBackEnd7.InDesignPlugin."
I am unsure what to do with this and how to go about activating/installing the correct plug-in for CS6
If anyone coul help me that would be great!

It sounds like you probably had a plugin from XMPie installed in CS5. If you need that functionality you'll need to install in CS6 as well.

Missing plug-ins in Mainstage?

Mainstage has been an incredible tool for me because I'm able to open Channel Strip Settings saved in Logic and create the perfect patches for playing live. Unfortunately, a few plug-ins that are available in Logic Pro 8 are not found in my Mainstage. For example, Vocal Transformer. Is this to be expected? Is there any way to add these missing plug-ins to Mainstage?
I'm using Vocal Transformer for its formant shifting abilities and I can't seem to find a reasonably inexpensive replacement...
Thanks in advance for any help.

Hi
Just checked.. Vocal Transformer is NOT available in Mainstage v1.02 (had not noticed before!).
It *is* available in Mainstage v2.
There is no way to add these 'internal' plugins, so your best option would be to upgrade to Logic Studio 2 (Logic 9/Mainstage 2).
HTH
CCT

Cs2 on xp, missing plug-ins

I created an indesign document a few days ago, I opened the application, and tried to open the file, I get an error message, cannot open file, missing plug-ins: lilo.apln and cellstyles.rpun, if you click ok, then a then it says, cannot open file, and it lists .prun files, Cannot open filexx.indd. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of adobe inDesign.
I did not add in these plug ins, I went to adobe updates and it said no updates available.
Any ideas?
-Nancy

Hi,
I only have cs3 for flash, dreamweaver and photoshop.I only have Cs2 for inDesign.
I was really surprised this happend, as when I created the document I had no errors during production. But when I tried to open it the next day to update the file, I had the error message. I had to use MS publisher to get this newsletter out to a client in a hurry.

Missing plug-ins after upgrade

Similar Messages

Maybe you are looking for