Missing plugin from CS4

InDesign CC2014 will not package file due to missing plugin from CS4. Help, please.

@VS_Color – what plugin is missing?
Try export or save the indd file to IDML, open the IDML, save it under a new name and then do the packaging.
Uwe
PS. Hm, Bob was faster than me…

Similar Messages

Easiest way to transfer 3rd party plugins from CS4 to CS5?

CS5 is arriving tomorrow and I'd be grateful for a steer on the least painful way to move third party plugins from CS4 to CS5. I am running W7 64bit. Can I just copy the plugin folders at Program Files/Adobe/PhotopshopCS4 etc...Plugins and Program Files (86)/Adobe/PhotoshopCS4 etc. and replace the equivalent folders in CS5 with them?
Thanks.

Photoshop CS5 on Mac OS was reworked on a fundamental level to be able to run as a 64-application under the 64-bit versions of Mac OS. Because of this, old and 32-bit plug-ins won't run, can return errors, or cause crashes when you use them in either the 32-bit or the 64-bit version of Photoshop. See below for instructions on how to open Photoshop CS5 in 64-bit and 32-bit modes.
How to run Photoshop CS5 in 32-bit and 64-bit modes
To run Photoshop CS5 on Mac OS as a 32-bit application:
Select the Adobe Photoshop CS5 application file, installed by default in the Applications/Adobe Photoshop CS5 folder.
Choose File > Get Info, and select Open in 32 Bit Mode.
Deselect this option to run Photoshop CS5 in 64-bit mode.
To run Photoshop CS5 in Windows as a 32-bit application:
Close Photoshop CS5.
Navigate to the Program Files (x86) > Adobe > Adobe Photoshop CS5 folder..
Double-click the Adobe Photoshop CS5.exe file.
To run Photoshop CS5 in Windows as a 64-bit application (if your version of Windows and your hardware supports 64-bit):
Close Photoshop CS5.
Navigate to the Program Files > Adobe > Adobe Photoshop CS5 folder..
Double-click the Adobe Photoshop CS5.exe file.
This is my first post and hope it was helpful!! 8-)

Upgrading plugins from CS4 to CS5

If I upgrade from Photoshop CS4 to CS5, can I simply copy all my plugins from the CS4 plugin folder to the CS5 one? I am assuming here that my plugins are compatible with both versions of Photoshop.

The short answer is yes and no.
Some plugins must be reinstalled, and those may not know about CS5 without an update from their manufacturer. SOMETIMES you can identify all the supporting files and copy them as well, but this gets tricky.
Others - those that are self-contained and don't install any supporting DLLs, need registry entries, etc. - can be copied.
A rule of thumb is that if you copied a file into the plug-ins folder to start with, you can probably copy it to the new version of Photoshop. From what I can see CS5 is very compatible with older plug-ins (keeping in mind that 32 bit plug-ins work only with 32 bit Photoshop CS5, and 64 bit plug-ins work only with 64 bit Photoshop).
Never, but never point the Additional Plug-ins Folder setting at the old Photoshop installation, because there are Adobe-provided plug-ins that will conflict.
-Noel

Missing plugins from AE CS6 installation?

Hi all, feel stupid for having to ask but...
I can't seem to find any threads via google regarding this. I went to use the "Time Remapping" plugin in AE CS6 installed on my PC and found it missing (haven't ever used it before). This is the first version I have owned, having only used AE on school computers. My suite is CS6 Production Premium, which I installed with all options included as far as I could tell.
I've checked throughout the effects menus and also tried searching from the Effects & Presets panel. All that's listed under "Time" is:
- CC Force Motion Blur
- CC Time Blend
- CC Time Blend FX
- CC Wide Time
- Echo
- Posterize Time
- Time Difference
- Time Displacement
- Timewarp
I've read dozens of threads/posts mentioning this plugin and no mention of it being a 3rd party paid plugin. Please help me, I feel like the answer's staring me in the face but I'm still missing it. I also wonder if I am missing any other plugins that should be installed.
Thanks

Your install is busted. Refer to this and install again:
Installation Preparations
Installation and Licensing Problems
Mylenium

Missing plugin in CS4 InDesign

Hello,
I have the CS4 Standard Suite for my MacBook Pro and when I open InDesign, it says that I am missing the LILO plugin (the toolbar is missing!) Can I reinstall it somehow. Thank you!

LoveKatyaG wrote:
I got it here Download CS4 products.
Can you please at least TRY to help me set ip up?
Best we can do for you is to suggest uninstalling, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 ) and then run the installer again. It would probably be a good idea to restart your Mac holding down the Shift key before you do the reinstall to disable unnecessary extensions.

Can I copy a plugin from CS4 to CS5?

I have Nik Sharpener Pro 3.002 plugin with Photoshop CS4 but would like to install it in my new Photoshop CS5. Can anyone tell me if it is compatible with CS5 and if so how do I install it in my newer PS version please?

You'd be best served seeing if there's an update for CS5 from NIK since the old plug-in won't run in 64bit. I may run in 32bit but there still may be issues.
More details here.
Plug-in changes in Photoshop CS5:
http://kb2.adobe.com/cps/828/cpsid_82824.html

Missing Plugins prevent CS4 Program opening?

Hi,
I have InDesign CS4 (Vista) and have not opened it in a while (purchased Jan 2009 via download).
Yesterday the program refused to open - can't get past the splash screen.
The program is looking for these two items:
("failed to open...")
WORLDREADY.RPLN
SCRIPTS PANEL.APLN
When it cannot find them, I get this message:
Cannot load InDesign.exe because it requires WorldReady. Please install the WorldReady plug-in and restart InDesign.
I've searched the forums and download/update pages, and am not finding anything that seems to help. Should I re-download and re-install the product?
Thanks in advance for any help!
Leslee Hare

Cannot load InDesign.exe because it requires WorldReady. Please install the WorldReady plug-in and restart InDesign.
Hi.
Maybe this will get you further:
http://forums.adobe.com/thread/431773?tstart=0
http://www.thomasphinney.com/2009/01/adobe-world-ready-composer/
Torben

CS5 upgrade from CS4 - plugins question

Hi -
can anyone refer me to a list of steps to move all of my plugins from CS4 to CS5 as part of the upgrade?
My plugins are:
Anthropics portrait pro 10
Image Trends - Fisheye hemi, pearly whites and shine-off
Nik Software - NIk sharpener, color efex, silver efex
onONE - mask pro 4
picture code - noise ninja
Power Retouche
Photo Frame 4
PhotoTools Pro 2.6
I don't really want to run both versions of photoshop... I've done that in the past and never once went back to the old once I upgraded... but open to advice there, too.
thanks,
tom

Tom O'Connell wrote:
You used to be able to transfer them to the new version without reinstalling... is that not possible any longer????…
Read my previous post again:
You can only use those plug-ins in CS5 that have been upgraded by their particular software developer to run in 64 bits.
CS4 and earlier versions of Photoshop were 32-bit Carbon applications. CS5 is Cocoa and runs in Snow Leopard in 64 bits. You will need to get the updated 64-bit versions of your plug-ins from each of their developers.
Otherwise you'll need to run CS5 in 32 bits, with a corresponding loss in performance and any other consequences of running in 32 bits.
Wo Tai Lao Le
我太老了

Missing plugin IPE.PLN

Hi...
i'm urgently need to open and edit some indesign files....
I'm using Indesign CS3, when i try to open the .indd file warned for a missing plugin "IPE.PLN"
Attached the screenshot of the warning...
I asked from the file creator, he is using the same version of cs3 and no additional plugins installed.
also i cannot get any info on that missing plugin from any search engine or forums.
I tried "OK"ed the missing plugin warning, it does opened up though i can't put in any .indb
also tried to save as the file.. still doesn't work.
can anyone help?? Please and Thanks....
-Cha

P Spier wrote:
That's not a standard CS3 plugin. It might be for the CE or ME version or something like that, though.
Definitely not ME...

Porting from CS4 to CS5

Im trying to port some plugins from CS4 to CS5. During the process I encounter several errors. Once of them is listed below.
Error 1 fatal error C1189: #error : DEBUG and NDEBUG are out of sync! // $$$ need to set NDEBUG in release builds c:\program files\adobe\cs5\indesign product sdk\source\public\includes\K2Debugging.h 53

Pectora:
Check the C++/Preprocessor/Preprocessing Definitions field in your Project Properties dialog. Make sure that your Debug version has a "DEBUG" definition placed in there, and that your release version has an "NDEBUG" definition placed in there someplace. My guess is that either you left one of them out, or that you have the DEBUG definition in your release properties. Other possibilities are a failure to separate definitions properly or misspelling.
HTH!
P.S. I am assuming that you are working with VS8 on a Windows box. This information should be included in your next submission just to make sure we are all working from the same starting point.

Missing plugin in ID CS4

Hi,
When I opened the Indesign CS4 document, it shows the message
mm.ms.im.Kernel.IndesignPlugin
"The document 'sample.indd' used one or more plugin-ins ..."
Question 1: Is there any way that, if there is any missing plugin shows, then the file should not opened by indesign. Is there any way to do this within Indesign application.
Question 2: If that plugin is realy not used in the Indesign document, Is there is any way to remove the missing plugin information's from the Indesign document without saving as .inx .
Please suggest me on this two questions.
Thanks for the help.
Regards,
Gopal

No, It is not a CS5 file.
This file is created in ID CS4. When we open the same file in another mac machine which have ID CS4, it shows the missing plugin information.
Actually, this plugin is not used in the document.
My question here is, since the plugin is not actually used in the document, why the ID CS4 shows the missing plugin dialog when we open the file.
Is there any way to avoid this dialog while opening the file.
Thanks,
Gopal

Trying to open a saved down idml file in CS4. Updated CS4 but still missing plugins?

I'm trying to open both an inx file as well as an idml file exported from CS5. I have CS4 and it is updated as far as it will go, but it still says I'm missing plugins. And a lot too... 19 of them! Does anyone know how I can get these plugins? It's requesting them for both the inx file and the idml file.

That is indicative of someone simply renaming an INDD file to IDML. In other words, that file wasn’t EXPORTED from anything. It was saved with a different extension or renamed after saving.
Bob

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

The error message is below. When I get info on the file it says it's a CS3 file.

This is an message when I open up CS4 in Illustrator. "Some plugins in additional plugins folder are conflicting with application or user plugins. It will skip loading plugins from additional plug-ins folder? What does this mean and how can I fix it.

This is an message when I open up CS4 in Illustrator. "Some plugins in additional plugins folder are conflicting with application or user plugins. It will skip loading plugins from additional plug-ins folder? What does this mean and how can I fix it?

Thanks Larry. I thought so. I will do this weekend. Again, I appreciate your help.
Trying to get updated software – I am not a fan of the cloud stuff. Nothing I can do about it.
Thanks again Larry!

CS3/CS4 - Persistent data results in missing plugin warning

Hi,
In my plugin I add persistent data to kDocBoss and kSplineItemBoss.
If the users of my plugin sends a document to one that do not have the plugin, a missing plugin dialog is shown. This is not a big problem, however, users without the plugin are unable to package the document due to the missing plugin!
Is it possible to make InDesign discard persistent data if the plugin is not available, so that the document no more depends on the plugin?
I will be thankful if somebody can give me a hint on this problem.
Kind regards Toke

Hi again,
IgnoreTags solved my problem
Kind regards Toke

Missing plugin from CS4

Similar Messages

Maybe you are looking for