"Missing Profile - The doc does not have an embedded CMYK profile"
For the first time ever last Wednesday each time I open a file in AI - CS3 I get the same message: "Missing Profile - The doc does not have an embedded CMYK profile". I looked in library>colorsync>profiles and sure enough they were gone? I downloaded new profiles from Adobe, installed them in library>colorsync>profiles - and still the same thing with each file I open. I dragged AI to the trash, re-installed AI from my disc repeated the process with the same results - HELP!
I don't seem to be able to find any info on the Adobe forum, I realize I need to upgrade but for now what is the solution - Thanks in advance. Boatingislife!
Hi Larry, Thanks for your reply along with Muppet Mark, If I changed the color settings originally it was not my intension, I was simply just opening the next project to work on and viola’ “missing profiles”.
Attachment (picture) 7 was my last setting for color prior to your email, and yes I was messing around with this last night comparing it to one of our old G4’s, so I can’t remember where it started out before I got my hands on it.
Attachment (picture) 8 is my current settings based on your email recommendations.
Attachment (picture) 6 is the message I receive when I open any files created prior to these changes I just made. However after I open and resave the file I no longer receive this (picture 6) message.
My question is will my color be back to where it was before the problem started last week. In looking over one of the files I opened (I design/build transportation maps btw) most of the color is where I usually have it set however some colors were fractional as if they were converted from spot colors. SO I’m not sure what to do except go through all the known colors and make sure they are where I usually would set them, or do you have a better suggestion.
Oh by the way – for all you guys that are helping lunch is on me at McDonalds on Michigan St in Grand Rapids, MI!!
#7
#8
#6
Similar Messages
-
Download folder (stack) on the doc does not have icon on it.
I just restored the download folder on the doc (after deleting it by mistake). The folder that displays on the doc now is the correct download folder but it does not have the little download icon on it. Is there a way to restore the picture that it originally came with?
Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?
File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.
-
The document does not have a valid format.
I created a special format document when I had Pages '08. I needed the proportions of the document to match the special paper on which the document would be printed so I created a special size for my document rather than 8 1/2 x 11. If I remember right it was closer to 8 1/2 x 13 or so. Anyway, I have now upgraded to Pages '09 and can no longer open any of these special format documents. I have versions of a couple of the documents that were created in Pages '08 without the special proportional size page and they open without issue. However the special size documents all get "The document does not have a valid format" and will not open. I really NEED these documents. I have seen some posts about renaming to a .zip and then something about an index file but I don't understand where this index file might be and what good it will do to open it. Also I know the files exist because they are still showing their original file sizes (not 0 MB). Any assistance would be appreciated.
Don't continue to search fruhulda.
I never saw such files.
The only things which I may recognize are :
the strings :
mluc
(10) nbNO --> Norvegian
(16) svSE --> Sveridge
(4) fiFI --> Finnish
(1) daDK --> Danish
(17) zhCN --> Chineese(1)
(5) frFR --> French
(8) jaJP --> Japanese
(3) enUS --> English (US)
(12) ptBR --> Portuguese (Brasil)
(15) esES --> Spanish
(18) zhTW --> Chineese(2)
(14) ruRU --> Russian
(9) koKR --> Korean
(6) deDE --> Deutch (Germany)
(2) nlNL --> Dutch (Nederland)
(7) itIT --> Italian
They are the symbols used to identify the languages used for 16 versions
Two others are missing:
(11) Polish (Polska) missing
(13) Portuguese (Portugal) missing
I found also
iMac in plain ASCII and .i.M.A.C (dots are in fact NIL characters) which is the Utf 16 representation of iMac.
During a few seconds I thought that it was a piece of System Files but the page thumbnail must be available somewhere so that the Finder is able to display it.
I will send these genetically modified documents to Apple Bugs Hunters.
Yvan KOENIG (VALLAURIS, France) lundi 31 janvier 2011 17:46:39
At the very end there is also the trailing string which fool the message parser:
the formula : *_Copyright Apple, Inc., 2010 -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
"The updater does not have a firmware image"
My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.
Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.
-
Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFRThe Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.
-
I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AMHi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?
Just tagging on as I encounted this problem this morning. I'm using Mavericks, on MBP (late 2013).
Have both Keynote 5 and 6 - tried to open the file in both, to no avail. I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now. Also tried uploading to iCloud, renaming, redownloading - no fix there either. I've tried to open on iPad and on a different user's iMac - again, get the same error.
It worked yesterday and the day before. It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
Any suggestions? -
I have a really old Itunes account. I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year. How can I fix this? I have about 70 downloaded songs on this log in that I would like to get back.
Thank you in advance.Contact iTunes customer support.
-
Hello,
I try to make a HV website in Azure. It took me hours to figure out how to make a HV certificate with my own password. But I figured it out. With the HV application manager I uploaded the certificate to the HV platform. This worked fine. Then I created a
c# project with also works well on my local machine.
This is the code I use in the web.config
<appSettings>
<add key="ApplicationId" value="24ee15be-1497-4719-ad70-d1223adbf021" />
<add key="ShellUrl" value="https://account.healthvault-ppe.co.uk/" />
<add key="HealthServiceUrl" value="https://platform.healthvault-ppe.com/platform/" />
<!-- when we call the SignOut() method on HealthServicePage, it redirects us to the page below -->
<add key="NonProductionActionUrlRedirectOverride" value="Redirect.aspx" />
<!-- The redirect page (specified above) uses these keys below to redirect to different
pages based on the response from the shell -->
<add key="WCPage_ActionHome" value="default.aspx" />
<add key="WCPage_ActionAppAuthSuccess" value="default.aspx" />
<add key="WCPage_ActionSignOut" value="SignedOut.aspx" />
</appSettings>
Next step is to deploy the site to Azure. I was able to upload the certicate to Azure.
After deploy I get the following error:
System.Security.SecurityException: The specified certificate, CN=WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021, could not be found
in the LocalMachine certificate store,or the certificate does not have a private key.
I checked the certificate on another server with a different key in the web.config
<add key="ApplicationCertificateFileName" value="c:\Zodos\website\WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021.pfx"/>
This gives me this error:
Exception Details: System.Security.Cryptography.CryptographicException: The specified network password is
not correct.
So the procedure I followed definitely was not correct:
It works on my local machine
It doesn't work on another server or on Azure
I can see that the procedure I follow is not correct, but what am I doing wrong?
WilfredI am having the same problem. I see I have updates thru the Mac App Store but when I try and run the System updates in the Mac App Store it errors out. But I can update third party apps.
Have even tried going thru Terminal to check for software updates but still have same error claiming it can not find the hostname server.
Jefre -
Hr_maintain_masterdata showing an infotype that the user does not have auth
subject: hr_maintain_masterdata showing an infotype that the user does not have authorisation for
Hi all,
I've a user account that's meant to perform staffing, based on the actual HR role. The system is also set up with an infogroup that contains infotypes 0000, 0001, 0006, 0185, XYZ and other infotypes; XYZ representing an actual infotype. The HR role is not supposed to have this infotype XYZ.
When PA40 is used, infotype XYZ will be skipped, as the user account do not have authorisation for it. I could then proceed to create the record.
When the fm: hr_maintain_masterdata is used, I was prompted that I do not have authorisation for infotype XYZ.
I have setup my fm with the mininum amount of values, as indicated below.
I did not populate a table for "proposed_values" so the infotypes called were due to the actions of the infogroup.
fm: hr_maintain_masterdata
pernr = 01234567
massn = 01 (new staff)
actio = INS (insert record)
tclas = A (master record)
begda = 01.09.2010
endda = 31.12.9999
werks = myCompanyPlant
dialog_mode = 2 (online)
luw_mode = 1 (commit, if no errors encountered)
no_existance_check = X
Q. Is there any way to let the function module call the infotypes, with authorisation checks, as what PA40 is doing?
Your guidance would be appreciated.
Thank you,
James WongA behaviour that has been observed was that, after infotype 0185 was saved, the function module throws me back to infotype 0000, citing, "No authorization to maintain XYZ exists". Data that I had populated to the screen, either via the FM or by manual input were cleared. If I skip the next 4 screens, I'll arrive at the Infotype after XYZ, with the data populated. Subsequent infotypes also have their data filled in.
Once I complete the sequence, the personnel record will be created. Upon examination, the frist 4 screens that were skipped in the 2nd pass contains data that were entered in the 1st pass.
My question, as posted in the original post, is why infotype XYZ is triggered by the function module, as the staffing account does not hae access for it. If I repeat the process using PA40, the infotype is skipped accordingly.
Any help would be appreciated.
Thank you,
James Wong, -
I have trouble creating a pdf portfolio from Outlook: it creates the portfolio, but the result does not have "From" or "Subject" in the index. Please help!
Thank you, I am aware of this function. The fields are present, but blank. (It seems that the data is not getting exported…)
Please keep trying to help me!
-Nancie
Maybe you are looking for
-
How long should I have to wait before I get a spee...
I have had weeks of problems with slow broadband issues due to a line fault which only shows when it is wet. They have appeared to fix the problem on Friday at long last as I did not lose my line when it rained today but my speed has remained between
-
I downloaded the latest version of firefox and now I cannot access the web. The wireless connection appears to be properly installed?
-
Bridge Keywords Dupliacte Problem.
What are the Italicized duplicate keywords in Bridge and How do I get rid of them permanently? I'm using Design Premium CS5 with all the updates on windows 7 64bit. In the keyword panel, I have the same keyword in several places in the hierarchy. The
-
Final Cut Pro: Imported music files too large?
I've imported a 10 min and 20 sec .aif audio file that is 104.2 MB currently in Final Cut. Does this seem like a correct file size? Is there any way to make the file smaller? Here's the other specs for the file: data rate: 172.3k/sec Aud rate: 44.1 K
-
Pithy - A tiny console file browser
Pithy is a console file browser, a branch of ranger which focuses on shortness and simplicity of the code and integration into the shell while retaining rangers basic features and looks. Its size is less than 1000sloc (about a tenth of ranger) which