Missing Project from Project Center View

One of my Project Managers cannot see the project she is assigned to in the Project Center view. Everyone else can see the project except for her but she is the project manager. she has not changed or customized her view in any way so I am not too sure what
is happening.
Any thoughts?

Hi EPM Admin,
Check that she is the project owner of the project ("project information" page in PWA). Then publish the project.
Also check the view configuration for any filters (both in the view definition and in the user's project center).
Finally check the security category the user belongs to and the RBS configuration. But anyway, if she is the project owner and the project has been published, she must see the project.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

Custom '% Work Complete' in project center views

Hi,
My projects typically have two main summary tasks under the project summary task. When calculating the % work complete at the project level, I would like to use the % work complete of one of the summary tasks instead. Also, when I show a tracking gantt in
a project center view, I would like this custom % work complete value to be the progress fill in the tracking gantt bar. Does anyone know of a way to do this?

Hi Steve.Pierce,
You can achieve the 1st part simply enough by using a custom field. The image below should give you enough info assuming you can find your way around MS Project.
For the 2nd part, you'd need to work out a formula that calculates the customised % work complete and puts a end date into a free Finish field (1-10), and then change the progress lines from Actual Start to
Finish (1-10). This would assume the work is flat line prorated across the duration.
Ben Howard [MVP] | web |
blog |
book | P2O

How to display Issues for the projects which user can view in the Project Center View

Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.

Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Project Center Views

Is it possible to send a link that will launch a given view in PWA 2013? We have several views defined and I would like to email my managers and have them update the project status's for all projects in a given view so that workflow will process correctly
for the projects.

Hi,
Unfortunately it is not possible. The view ID is not part of the project center URL (https://servername.com/sites/pwa/Projects.aspx). By default, it will open on the last view used by the user.
But what you can do is to associate views to categories. Doing this, you can identify a group of users, assign them to a category with 1 unique project center view. Thus you'll be sure that they always step in the required view.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Project Center permissions needed

Hi
This is probably an easy one, but I'm missing something... I want a user to be able to view the Project Center, and so I have given him the following permissions in his category:
Open Project
Publish Project
But apparently this is not enough because the user gets an "Sorry, you don't have access to this page" error as soon as he logs in (he doesn't have access to a single page). Do I need to give any other permissions?

Indeed Pedro, in addition to the global permissions of the group, you have to give access to the project center view to the category the user belongs to.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

IOS 7 Missed Notifications won't clear in the Missed section of Notification Center

I've litterally tried everything! Anytime I get a missed call it shows up under the missed section of notification center. I then tap it and call the person back but afterwards it still stays in the Missed section of Notification Center, it does not clear after I acknowledged it. This is clearly a bug, but it doesnt happen on other people's iphone (JUST MINE!) I've tried every possibility...I had my phone swapped out, Restored my phone as a NEW iphone and I even created a brand new iCloud email address for my contacts...the only thing i can possibly think is that it has something to do with my apple id or something. because the only time i don't have the issue is when i restore my phone my phone as a NEW iphone and i DONT log onto my apple id then the issue wont occur, but i need my apple id logged in for all my purchases and what not. So im thinking it has something to do with my @icloud.com address. I looked online and saw some other people were having a similar issue, and yes when i restart my phone the missed calls clear, but i should not have to do this every single time i want to get rid of a notificaion. If anyone at Apple is reading this.....PLEASE FIX THIS ISSUE. Does anybody out there have a fix?
P.S. I am using a brand new iphone 5s running the newest version of iOS (7.0.2)

I have the same issue. It is a bug that apple needs to address. I have realised what causes the problem is that. When you open the Phone app and view the missed calls. This removes the missed calls from the Notification Center "All" tab, but the Missed Call stays in the "Missed" tab. Few quick fixes I have tried is. Clearing the missed calls from Notification Center "All" tab before accesing the Phone app. Then going to the Phone app to call the people back. Also you can clear the Missed Calls from "Misses" tab by going to Settings>Notification Center>Phone then turn OFF then turn ON "Show in Notification Center" Hope this helps.

Possible to take user to a certain view in the Project Center

Hi All,
Is is possible to take a user via a link to a specific view in the Project Center? If not is it possible to flip the view via code when a user logs into the Project Center?
Thanks!

Hi
Is this Project Server 2010 or 2013 ? In 2010 Have you tried providing permissions for the user on a specific view ?
You may also look at post to understand how the user properties are saved:
http://blogs.technet.com/b/projectsupport/archive/2013/12/11/project-server-2013-error-loading-views-if-the-default-view-is-missing.aspx
--Hope this helps
Thanks --Ajith

PWA 2013 Project Center Default View Problem

I removed all the views for the Project Center and created new views more appropriate for my organization within the Manage View area through PWA Settings . This included removing the Summary view which I have now understand is the default view. So
when users go to the PWA Project Center page, they receive the following error message:
"View Failure - The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view."
At this point, if the user select OK, they see the following message:
"You don't have permissions to view any Projects"
Then they can change the view and everything is fine for that user.
If they select Cancel, they have the option to select a different view and everything is fine for that user.
My question is, how do I set a new view as the default view? Based on the research I've done, this doesn't appear to be an option. Assuming that is correct, what are my alternatives? This will be a continuous problem because all new user
will see this error message.
Thanks!

There is no option to define a Project Centre view as the default view within PWA that I am aware of.
The Summary view is just the first view that is displayed when you access the Project Centre. Once you have selected a different view in the Project Centre if you then navigate away from the Project Centre, to the Resource Centre for example, and then return
to the Project Centre it will display the view you last viewed.
I think the same applies if you close the browser and then re-open it.
If anyone knows how to determine the default view in the Project Centre I would be interested to learn.
Dominic Moss MAPM, MCTS, MCITP, MCT
Wellingtone PM News
Wellingtone EPM Site
Wellingtone PM Recruitment

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Project Documents Icon in Project Center

hi,
project Server 2010: In Project Center we have noticed that several of our projects are missing the "Project Documents'" which is located in the first column next to the Open Project icon, even though there are files in the Project Documents Library of the
Project Site.
I tried publishing both from web and MSP, and syncing Project Sites. Is there something we are missing?
Thanks,
Spyros

Hi there,
Thats strange as the Status column doesnt have any impact on the icon displaying or not. So for those projects that dont have any icons, if you update one documents Status to be "Final" does the icon appear?
Thanks
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc.

I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc. Who have ever found this problem,
pls. help.
The pop up error msg. is "Sorry, you don't have access to this page"

Hi,
According to your description, after you cleared job queue about force check-in then you can't access some pages in PWA.
Maybe you need to check in the pages which has been checked out.
If you have administrative rights, it is possible to override the check-out via the View All Site Content page:
Site Actions->View All Site Content->Pages->Hover the item you want to check in, and from the context-menu (arrow-down next to the filename), choose "Discard Check Out"
Besides, to troubleshooting the error “Sorry, you don't have access to this page”, refer to the following articles:
http://sharepoint.rackspace.com/sharepoint-2013-troubleshooting-an-access-issue-with-a-custom-master-page
http://technet.microsoft.com/en-us/library/ff758656(v=office.15).aspx
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Missing Projects in iMovie 09 after upgrading to Mavericks

Using iMovie 09 (8.0.6)
Before Mavericks came out I moved (copied) my iMovie Projects and Events to an external hard drive (from within iMovie, not the OS).
Everything was where it should be and worked properly after I was done.
My first time back into iMovie since upgrading to Mavricks and now my projects are missing in iMovie. The projects are present on the external disk in the OS, but they don't show up under the external drive from within iMovie's Project Library window pane. The events are present on the external when viewed from either within iMovie or the OS.
I've found the solution to delete the UpdatedToiMovie10 file, but since I didn't upgrade iMovie, that's not an option for me.
Anybody have any ideas?

I do suspect there must be some incompatibility between Mavericks and iMovie v. 8 because all was working in your previous operating system (was that ML, Lion or Snow leopard?) and the OS upgrade should not have touched your Projects folder (it is still at the root level of your external drive isn't it?.
Did you get iMovie 10 when you upgraded to Mavericks? (I suspect not because you would have needed to have iLife '11 and then you would have had iMovie 9). I am wondering whether iMovie 10 would be able to see and update your missing projects. Trouble is that would be a $15 (I think) gamble which may not pay off.
(Actually iMovie 9.0.9 doesn't launch at all under Mavericks on both of my Macs for reasons I still don't understand - for most people it works OK) but I was able to update projects to iMovie 10 and have now moved on to FCP 10.1.
Geoff.

Project Server 2010 - Project Center: An unknown error has occurred

Hi,
We have an issue where project center is throwing 'An unknown error has occurred' error message. Searching the ULS logs provides this;
12/01/2011 11:48:11.53 w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected Detected use of SPRequest for previously closed SPWeb object. Please close
SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace:    at Microsoft.SharePoint.SPWeb.get_CurrentUser()     at Microsoft.Office.Project.PWA.PJContext.get_RegionalSettings()
at Microsoft.Office.Project.PWA.PJContext.get_LocaleCulture()     at Microsoft.Office.Project.PWA.WCFContext.AuthenticateUser(Message message, WCFContext& wcfContext, String userName, Boolean isWindowsUser)     at
Microsoft.Office.Project.PWA.WCFContext.GetContext(Message message, String userName, Boolean isWindowsUser, Boolean newCookie, Uri originalTargetUri)     at Microsoft.Office.Project.Server.ProjectServerRouter.Microsoft.Office.Project.Server.IProjectServerRouter.ProcessMessage(Message
me... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected ...ssage)     at SyncInvokeProcessMessage(Object , Object[]
, Object[] )     at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)     at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc&
rpc)     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)     at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(RequestConte... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected ...xt request, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result)     at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)     at System.ServiceModel.AsyncResult.Complete(Boolean
completedSynchronously)     at System.ServiceModel.Channels.InputQueue`1.AsyncQueueReader.Set(Item item)     at System.ServiceModel.Channels.InputQueue`1.EnqueueAndDispatch(Item item, Boolean canDispatchOnThisThread)
at System.ServiceModel.Channels.InputQueue`1.EnqueueAndDispatch(T item, ItemDequeuedCallback dequeuedCallback, Boolean canDispatchOnThisThread)     at System.ServiceModel.Channels.InputQueueChannel`1.EnqueueAndDispatch(TDisposable item,
ItemDequeuedCallback dequeuedCallback,... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected ... Boolean canDispatchOnThisThread)     at System.ServiceModel.Channels.SingletonChannelAcceptor`3.Enqueue(QueueItemType
item, ItemDequeuedCallback dequeuedCallback, Boolean canDispatchOnThisThread)     at System.ServiceModel.Channels.SingletonChannelAcceptor`3.Enqueue(QueueItemType item, ItemDequeuedCallback dequeuedCallback)     at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext
context, ItemDequeuedCallback callback)     at System.ServiceModel.Activation.HostedHttpTransportManager.HttpContextReceived(HostedHttpRequestAsyncResult result)     at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state)     at System.ServiceModel.PartialTrus... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected ...tHelpers.PartialTrustInvoke(ContextCallback callback, Object state)
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequestWithFlow(Object state)     at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2()     at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()
at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks()     at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state)     at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32
errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)     at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UIn... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
General                       90hv Unexpected ...t32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)
at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.54 w3wp.exe (0x1A98)                       0x15A0 SharePoint Foundation
Topology                      e5mc Medium WcfSendRequest: RemoteAddress: 'http://servername:32843/f78ead39833941f4911623b393bd511f/PSI/PWA.svc'
Channel: 'System.ServiceModel.Channels.IRequestChannel' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/ProjectGetProjectCenterProjectsForGridJson' MessageId: 'urn:uuid:05d10069-fa3b-4f09-8a7b-1ba900608c5a' 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.56 w3wp.exe (0x05D4)                       0x1EF4 SharePoint Foundation
Topology                      e5mb Medium WcfReceiveRequest: LocalAddress: 'http://servername.domainname:32843/f78ead39833941f4911623b393bd511f/PSI/PWA.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/ProjectGetProjectCenterProjectsForGridJson' MessageId: 'urn:uuid:05d10069-fa3b-4f09-8a7b-1ba900608c5a' 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.56 w3wp.exe (0x05D4)                       0x1EF4 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61 w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception Exception occurred in method Microsoft.Office.Project.Server.BusinessLayer.Project.ProjectGetProjectCenterProjectsForGridJson
Microsoft.Office.Project.Server.DataAccessLayer.FilterDal+FilterException: Error during filter query execution.   Query:     declare @ResUid UniqueIdentifier; set @ResUid = 51924808-f1b5-45b1-81d6-01f4e314df4b; declare @PermUid
UniqueIdentifier; set @PermUid = a120a079-75bc-4f0f-b376-3fb0ae9ac940; declare @ViewUid UniqueIdentifier; set @ViewUid = 63d3499e-df27-401c-af58-ebb9607beae8; declare @P0 Int; set @P0 = 5;    SET NOCOUNT ON    SELECT
T.PROJ_UID   INTO #T0   FROM dbo.MSP_PROJECTS AS P      INNER JOIN dbo.MSP_TASKS AS T ON T.PROJ_UID = P.PROJ_UID     INNER JOIN dbo.MSP_RESOURCES AS R ON R.RES_UID = P.WRES_UID
LEFT JOIN dbo.MSP_WORKFLOW_STATUS AS WFS... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ...TS ON WFSTS.PROJ_UID = P.PROJ_UID     INNER JOIN dbo.MSP_WEB_FN_SEC_GetAllProjectsResCanViewByViewID(@ResUid,
@PermUid, @ViewUid, 3) AS perm ON perm.PROJ_UID = T.PROJ_UID WHERE T.TASK_OPTINDX = 1.0    AND (ISNULL(WFSTS.STAGE_STATUS,-1) IN (-1, 1,2,3,5,6))   AND ((P.PROJ_TYPE <> @P0) OR (P.PROJ_TYPE IS NULL)) CREATE CLUSTERED
INDEX PK_#T0 ON #T0 (PROJ_UID)    SET NOCOUNT OFF    SELECT      T.PROJ_UID ,      P.PROJ_NAME ,      T.TASK_START_DATE ,
T.TASK_FINISH_DATE ,      T.TASK_PCT_COMP ,      T.TASK_WORK ,      T.TASK_DUR ,      R.RES_NAME ,      P.WPROJ_LAST_PUB ,
P.PROJ_OPT_MINUTES_PER_DAY ,      P.PROJ_OPT_MINUTES_PER_WEEK ,      P.PROJ_OPT_DAYS_PER_MONTH ,      T.TASK_SUMMARY_PROGRESS_DATE ,      T.TASK_IS_MILESTONE
,      dbo.MSP_FN_HYPERLINK_HREF(T.TASK_HYPERLINK_ADDRESS,... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ... T.TASK_HYPERLINK_SUB_ADDRESS) AS TASK_HYPERLINK_HREF ,
T.TASK_OUTLINE_LEVEL ,      P.PROJ_TYPE ,      T.TASK_DUR_FMT ,      P.WSTS_SERVER_UID ,      P.PROJ_OPT_CURRENCY_CODE ,      P.PROJ_ACTIVE_RISK_COUNT
,      P.PROJ_ACTIVE_ISSUE_COUNT ,      P.PROJ_TOTAL_DOC_COUNT ,      WOB.WOBJ_ISSUE_REF_CNT ,      WOB.WOBJ_RISK_REF_CNT ,      WOB.WOBJ_DOC_REF_CNT
,      PJSYNC.SYNC_WSS_LIST_UID ,      T.TASK_COMPLETE_THROUGH ,      (CASE WHEN T.TASK_UID=T.TASK_PARENT_UID THEN 1 ELSE 0 END) AS TASK_IS_PROJECT_SUMMARY   FROM dbo.MSP_PROJECTS
AS P      INNER JOIN dbo.MSP_TASKS AS T ON T.PROJ_UID = P.PROJ_UID     INNER JOIN dbo.MSP_RESOURCES AS R ON R.RES_UID = P.WRES_UID     LEFT JOIN dbo.MSP_WORKFLOW_STATUS AS WFSTS ON WFSTS.PROJ_UID
= P.PROJ_UID     INNER JOIN #T0 AS keys ON keys.PROJ_UID = P.P... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ...ROJ_UID     LEFT JOIN (SELECT WOBJ_PROJ_UID as PROJ_UID,[4]
as WOBJ_ISSUE_REF_CNT, [5] as WOBJ_RISK_REF_CNT, [3] as WOBJ_DOC_REF_CNT               FROM (               SELECT WOBJ_TYPE,
WOBJ_PROJ_UID                FROM MSP_WEB_OBJECTS WHERE WOBJ_TASK_UID='00000000-0000-0000-0000-000000000000') pwob
PIVOT (COUNT(WOBJ_TYPE) FOR WOBJ_TYPE in([3] ,[4],[5])) AS pvt) AS WOB ON WOB.PROJ_UID = P.PROJ_UID     LEFT JOIN dbo.MSP_SYNC_PROJECT_SETTINGS AS PJSYNC ON PJSYNC.PROJ_UID = P.PROJ_UID WHERE T.TASK_OPTINDX = 1.0
AND (ISNULL(WFSTS.STAGE_STATUS,-1) IN (-1, 1,2,3,5,6))      DROP TABLE #T0;     ---> System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique,
or foreign-key constraints.     at System.Data.DataSet.Enable... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ...Constraints()     at System.Data.DataSet.set_EnforceConstraints(Boolean
value)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.FillTypedDataSet(Boolean allowCache, DataSet typedDataSet, String[] tables, SqlCommand sqlCommand, Boolean enforceConstraints)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.FillTypedDataSet(DataSet
typedDataSet, String[] tables, SqlCommand sqlCommand, Boolean enforceConstraints)     at Microsoft.Office.Project.Server.DataAccessLayer.FilterDal.FillDataSet(QueryState queryState)     --- End of inner exception stack
trace ---     at Microsoft.Office.Project.Server.DataAccessLayer.FilterDal.FillDataSet(QueryState queryState)     at Microsoft.Office.Project.Server.Utility.FilterDalQueryInfo.Query()     at Microsoft.Office.Project.Se... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ...rver.BusinessLayer.Project.ProjectQueryInfo.Query()
at Microsoft.Office.Project.Server.BusinessLayer.Project.ProjectCenterQueryInfo.Query()     at Microsoft.Office.Project.Server.Utility.JsGridPopulationManager.InitializeSerializer(TableQueryInfo tableInfo, OrderInfo orderInfo, SliceInfo
sliceInfo, Guid groupSchemeUid, Nullable`1 ganttSchemeUid, Boolean serializeStyles, Func`1 getChanges, Boolean serializeUnfilteredHierarchy, Boolean serializeLookupTableInfo, Boolean showTimeWithDates, String rowFilter)     at Microsoft.Office.Project.Server.Utility.JsGridPopulationManager.InitializeSerializer(TableQueryInfo
tableInfo, ViewPropertyGroup properties, JsGridSerializerArguments gridSerializerArgs, Func`1 getChanges)     at Microsoft.Office.Project.Server.BusinessLayer.Project.GetProjectCen... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4)                       0x1EF4 Project Server
General                       0000 Exception ...terProjectsForGridJson(JsGridSerializerArguments gridSerializerArgs, Guid viewUid,
Int32 store, Boolean showInsertedProjects, Boolean clearPersistedProperties)     at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.ProjectGetProjectCenterProjectsForGridJson(JsGridSerializerArguments gridSerializerArgs, Guid
viewUid, Int32 store, Boolean showInsertedProjects, Boolean clearPersistedProperties) 18800f49-4909-4e4d-8130-6ead4d554598
I have searched the internet but most similar issues revolve around the resource center. I did find one person who just backed up the databases and provisioned a new site with success, but this has not worked. I am using the farm admin account, but all users
get this issue.
Any one got any ideas?
Rob Hardy

Bit further now.
It seems one of the project won't publish, and produces this error;
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
  <class name="ActiveCacheQueuedMessageExecutionError">
   <error id="12005" name="ActiveCacheQueuedMessageExecutionError" uid="53d5e6c5-be41-47c8-b336-2e472b99d142" error="System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_PROJECT_RESOURCES'. Cannot insert duplicate
key in object 'dbo.MSP_PROJECT_RESOURCES'.
Violation of PRIMARY KEY constraint 'PK_MSP_PROJECT_RESOURCES'. Cannot insert duplicate key in object 'dbo.MSP_PROJECT_RESOURCES'.
The statement has been terminated.
The statement has been
terminated.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)

at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader
ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)

at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.ExecuteStoredProcedureNoResult(String storedProcedureName, SqlParameter[] parameters)
   at Microsoft.Office.Project.Server.DataAccessLayer.WinProjDal.ExecuteStoredProcedure(String
spName, SqlParameter[] parameters)
   at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjUtility.ExecuteP12QueueableSPCommand(WinProjTraceContext wpTraceContext, DataStoreEnum store, P12QueueableSPCommand command, Boolean
retry, Boolean useTransaction)
   at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjQueueMessageDispatcher.DispatchMessage(ACMessage acMessage, Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext)"/>
  </class>
  <class name="Queue">
   <error id="26000" name="GeneralQueueJobFailed" uid="65e11595-30af-4be7-a9d0-ec767c880cc7" JobUID="c348fb86-d807-4b06-abaa-81fcbcbc94f3" ComputerName="SERVERNAME" GroupType="ACProjectSave" MessageType="Byte[]" MessageId="8" Stage=""/>
  </class>
</general>
</errinfo>
Anyone seen this? If I delete this project the project center loads. Obvisouly I don't want to do that though!
Rob Hardy

Project Server 2010 , Project Center, Resource Center, My Work not loading

Hi,
We have Project Server 2010 SP-2 env
Yesterday one of my Project Manager told me that he is not able to access any of the following page Project Center, Resource Center, My Work in our Quality env. Issue is it shows page is loading infinitely long and on botton it shows some script error mentioned
below
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Tue, 21 Oct 2014 13:55:19 UTC
Message: 'null' is null or not an object
Line: 217
Char: 4
Code: 0
URI: http://XXXXXXXXXXX/_layouts/inc/pwa/library/webmethodmanager.debug.js?rev=BtnvMSOtt14tg%2FnfhDTJpA%3D%3D
Also I have checked event logs in shows WebHost failed error with Event ID 3 , complete detail mentioned below.
Event Log Error
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/45523402
Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/PSI/ProjectServer.svc' cannot be activated due to an exception during compilation. The exception message is: Could not load file or assembly 'FirePoint.SharePoint.RssViewerWebPart,
Version=1.4.7.12, Culture=neutral, PublicKeyToken=e891f27e2edd24d0' or one of its dependencies. The system cannot find the file specified.. ---> System.IO.FileNotFoundException: Could not load file or assembly 'FirePoint.SharePoint.RssViewerWebPart, Version=1.4.7.12,
Culture=neutral, PublicKeyToken=e891f27e2edd24d0' or one of its dependencies. The system cannot find the file specified.
File name: 'FirePoint.SharePoint.RssViewerWebPart, Version=1.4.7.12, Culture=neutral, PublicKeyToken=e891f27e2edd24d0'
   at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
   --- End of inner exception stack trace ---
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)
Process Name: w3wp
Process ID: 5052
Also I have checked Brian Smith blog to resolve WebHost error with Event ID 3, but that didn't help.
So kindly help me to get this issue resolve and do let me know in case need further details.
Thanks

Hi,
From error log it seems you have some custom or thrid party web part activated in your application and that web part is not able to load which might causing those pages to get corrupt.
As a fix can suggest you below to two thing to check
1) Remove that "FirePoint.SharePoint.RssViewerWebPart" from your environment and try to access those PWA pages again.
2) Even after removing above web-part solution does not fix this issue, as it is quality env can you try to disconnect and reconnect the share-point farm . Then try to access those pages again.
Share us the latest update and your finding on this issue.
Regards
Sachin Vashishth MCTS

Missing Project from Project Center View

Similar Messages

Maybe you are looking for