Missing project templates and quiet MIDI keyboard?

Shouldn't I have a "Loops", "Voice" and "Podcast" templates when creating a new GarageBand project? Screenshots I've seen online indicate that I should, but I don't have them...
Additionally: why is playing using the Korg Nanokey results in sounds that are WAY quieter compared to using the exact same instruments being played with the virtual keyboard built into GarageBand?

Are you really using GarageBand '11, as your profile signature indicates, or have you upgraded to GarageBand 10.0?
This is what you should be seeing in GarageBand '11, version 6.0.5:
GarageBand 10.0 will show different types of projects:
If your version is really GarageBand '11 and templates are missing, check, what is installed in your system library:
/Library/Application Support/GarageBand/Templates/Projects/
Maybe, there are templates missing from the "Templates" folder. Then try, if reinstalling will fix this. Do you have an iLife GarageBand installation DVD?

Similar Messages

Using aggregator, project template and master slides

I have been hired to create an online course on project management using Captivate. The organisation has colour coded 5 areas of the project cycle. I have never used Captivate, but I was wondering if the following is on the right track and if there are any issues I would need to be aware of. I thought I would create a project template; create a separate module for each part of the project cycle (plus the introduction, conclusion and quiz) and use a different master slide for each module to use their colours; then aggregate. It will be published as SCORM to be uploaded into the learning management system in Sharepoint. Thank you in advance for your advice.

Sounds like a good plan to me. You might also consider using the diagram (if there is one) of the project process on the title slide of each module to help orient the learner as to which part is now being discussed.
One point though: If your LMS is using SCORM to track the learner's interaction with the course, don't use Aggregator to bundle the movies. Use the Multi-SCO SCORM Packager instead.
Aggregator is fine for bundling courses that are just going to be delivered to end users rather than tracked.

Please Help, Missing Project File and Discussion Advice Isn't Working.

Here's the rundown:
I was working in iMovie HD 5 when the power got cut out on my external hard drive. When I try to reload my project I got the 'Missing Project File' error that has been discussed by many on this board.
There are two known fixes.
1) Open the package and go back to the '~' version of the project.
2) Use the MovieTimeline.mov in the Cache to import it back into a new project.
Solution #1 simply didn't work.
Solution #2 imports the full video as a single long clip but is significantly lower in quality than the original version.
In addition, the movie was shot in true widescreen and plays in quicktime in 16:9 mode, but when I import that .mov file into iMovie HD for some reason bars are added on the sides and top and bottom of the frame, and the bars are thicker on the sides so it stretches the picture and makes everything look taller.
Although I'd certainly much rather have my original project timeline back, I could still continue my work if I could figure out how to import the .mov so that it retains the quality and size that it had to begin with.
Does anyone have any idea how to import it without losing the quality and size or how to gain back an earlier project save?
Please help if you can, my grandfather's 83rd birthday gala celebration (2 days away!) depends on it!

I know you're in a rush, so I'll mention a couple other possibilities.
Solution #2 imports the full video as a single long
clip but is significantly lower in quality than the
original version.
• You shouldn't see any difference. The video imported from the Timeline Movie.mov is exactly the same as the original video. My guess is you're seeing some side effect of the widescreen issue. That, or your iMovie playback settings have changed.
In addition, the movie was shot in true widescreen
and plays in quicktime in 16:9 mode, but when I
import that .mov file into iMovie HD for some reason
bars are added on the sides and top and bottom of the
frame, and the bars are thicker on the sides so it
stretches the picture and makes everything look
taller.
• Make sure you're importing to a DV Widescreen project.
• It might work to open the Timeline Movie.mov in QT Player Pro and export to a DV stream set to 16:9, then import that to the new project.
• It's curious solution #1 didn't work. What happened when you tried that?
Karl

CADO Report - Missing Project Definition and WBS elements

While running CADO (time sheet data) report for employee, data is not being pulled up for the WBS Element and Project Definition. What could be the reason? Here time is entered against a network activity but for some entries WBS element and project definition is dispalyed and for remaining it is not.

Yes....these activities are assigned to the WBS element in the project. As I mentioned earlier for the same activity in some cases WBS element is populated.

2 Problems with the Ipad Air...midi keyboard and usb microphone

IN SHORT:
2 Problems with the Ipad Air...what midi keyboard will connect to the lightning camera connector and what microphone as well? There seems to be issues with the ipad air not being able to power them. Has anyone got any devices to work yet?
IN DEPTH:
I have a yeti microphone that when I plug in it says its using too much power. A little samsung go mic I have plugs in find and works but isnt quite what im looking for. My midi keyboard is not reading...its probably 15yrs old (didnt expect it to work). I have ordered a usb powered keyboard but im now nervous it may not work if it requires too much power. Has anyone had any success with a particular model of keybaord? I saw a youtube video of the CME Xkey in which it was plugged into an ipad that uses the lightning jack, but was unsure if it was the air or a different model.
Any help is appreciated on this...I love my ipad air and hoping to make it my fully functional music recording device.
By the way I mostly use garageband

hey mate
Yes what I ended up doing is buying a powered usb hub. They are about 10 dollars or so on amazon.com. There are tons to choose from. I use a yeti micrphone now with no issues and a midi keyboard. You will need the lightning usb adapter too. You plug the lightning adapter into the ipad and the hub into the adapter then plug all your accessories into the powered hub. So it works well you just gotta buy an extra piece of equipment.

Playing two midi keyboards at the same time in logic for live show

hello, i have a macbook pro 2.16 cpu, os 10.4.7, logic 7.1.1 and 7.2 is on the way
1 gb of ram
a tascma us-428 inerface
i want to be able to play two diffrent midi keyboards at the same time is their a way to have one digital instrament for on keyboard, and another midi keyboard on a diffrent digital instrament at the same time, so as to play a live show?
and also if i want to chang the intrament in the middle of a song becase it switches half way throw the song, is it posble to atomate this switch insted of doing it by hand? please help! thank you.

here is some good reading regarding patch change
http://discussions.apple.com/thread.jspa?messageID=2931940&#2931940
http://discussions.apple.com/thread.jspa?messageID=1993033&#1993033
http://www.logicprohelp.com/viewtopic.php?t=1045&highlight=instrumentprogram+programmechange

I know how to create a PROJECT template, but is there a way to create SLIDE templates?

Basically I've got several modules, and throughout all the modules is several different pages (text&graphic page, hot graphic page, tab page etc etc).
What I would love to do is create a set template for each page type (a template for text&graphic, a template for tab page etc) as I have numerous instances of the same pages throughout all the modules (and also for continuity as well).
It would be great to create placeholders for slide templates just like the application in project templates, and then be able to drop these slides into different projects to have the same foundation to start adding data.
Project templates is a good start, but only if i want to use the same template throughout the entire module.
Any one know how to do this?
Thank yo
Rich.

If you're using Cp5/5.5 you can create multiple master slides to them apply to the applicable slides (I don't remember if it was in Cp4).
Master slides are portable, also, you can copy all the elements and paste them onto new slides in the same project or a different project.
Insert > Master Slide
Which should create a new blank slide in the Master Slide panel. You add items to the slide like backgrounds, captions, rollover captions, highlights, shapes, animations (buttons/click boxes are not allowed). You use the timeline as you would with a 'normal' slide, but you can't adjust the length of the master slide (this doesn't impact the length of a 'normal' slide).
On your content slides you select the master slide in the Properties panel, general, master slide dropdown.

Problem while creating a new project template

I am trying to create a new project template under one operating unit newly created.
I am using P A Super User responsibility for that operating unit.
In profile setting the above responsibility has been assigned the new operating unit under Mo operating unit profile.
Now when I go to Setup>>Projects>>Project Templates and click on New, the form to create new Project template opens up but in the field where I have to select the operating unit, it shows no values in the LOV.
Can anyone please help me to know what setting do I have to perform so that I can select the operating unit in this new Template creation Form.
Regards
Hawker Hunter

Dear Mr. Govind,
we have followed all the Project Implementation Setup for the new operating unit except for the Implementation options which we have to fill up for each operating unit.
In the implementation Options form in the first tab 'System' there are many fields to be filled up.
For 'Summarization period Type' we choose 'G L Period' and based on this the fields 'Calendar Name' and 'P A Period Type' automatically gets populated.
But in our case the 'P A Period Type' is not getting populated.
Can you let me know where we can link the 'P A Period Type' to the chosen 'Calendar name'?
Also there is a check box - 'Maintain common PA and GL Periods'. If we tick this check box, a message says: 'The Period Type and Calendar of the PA Period does not match the Period type and Calendar of the corresponding GL Period.'
Can you please let me know where to create the PA Period based on the corresponding GL periods?
Regards

Project Templates with Enterprise Resources

I'm using Project Server 2013 ( latets updates installed for both Client and Server)
I've created a project template and attached this to a project type. My template has enterprise resources speciified. So far so good.
Now I'm trying to create a project using this template and I'm getting some errors. (See below)
As soon as I remove the resources from my template the project creates fine.
It looks like 'rsResourceCannotAddLocalWithSameNameAsEnterprise' in the error below means that Project Server looks at the resource in the template and considers the resources in the template always to be a local resources. And of
course the resource already exists in my enterprise resources and therefore the project creation fails.
Datasets:
ProjectDataSet
Table ProjectResource
Row: RES_UID='0bb2c5b5-1716-e311-a1c1-005056992257' PROJ_UID='3121855b-f13b-e311-9f7f-005056991b52'
Error rsResourceCannotAddLocalWithSameNameAsEnterprise (2058) - column
RES_UID
General
Queue:
GeneralQueueJobFailed (26000) - ProjectCreate.ProjectAddToMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='353d845c-f13b-e311-9f7f-005056991b52' JobUID='3a21855b-f13b-e311-9f7f-005056991b52' ComputerName='13fdabbe-0ac0-4cca-b382-49d1853aec73'
GroupType='ProjectCreate' MessageType='ProjectAddToMessage' MessageId='1' Stage='' CorrelationUID='147f4f9c-ae30-b04b-aec7-382a52fa5fdf'. For more details, check the ULS logs on machine
13fdabbe-0ac0-4cca-b382-49d1853aec73 for entries with JobUID
3a21855b-f13b-e311-9f7f-005056991b52.
My questions are:
Are Enterprise Resources in templates supported?
Is there a way around this? We're trying to make it easy to select a subset of the enterprise resources available.

I have experienced this exact same thing and my situation is highly irregular.
This is with Project Server 2013.
I had an EPT with a Project Schedule that had Generic Enterprise Resources assigned and was able to create new projects without problems using the EPT from the New button in the Project Centre in PWA.
I was creating new projects to test and demonstrate Portfolio Analysis and was able to model Organisational Capacity represented by my Generic Resources and also the Surplus/Deficit element of Resource Constraints on a Portfolio. The Hired Resource Report
was failing.
A Service Pack and Cumulative update were applied to the Server and now I cannot create new projects using EPTs that have a project schedule with Generic Enterprise Resources assigned to tasks in the schedule.
I checked the error message for the Failed and Blocking job in the queue and the GUIDs were for my Generic Enterprise Resources. I deleted the offending Generic Enterprise Resources and then re-created them anew, edited the Project Template to have
these Generic Enterprise Resources on the Project Team and randomly assigned them to tasks in the schedule to generate a notional demand for work in the Project Template. I then Saved the Template in Project as a new Project Template and edited my EPT
to reference this new Project Schedule.
Same error encountered again.
Perversely I can open the Template schedule in Project Professional and do Save As and save it as a new project to the Server and that works just fine - the schedule is visible in the Project Centre and I can edit the schedule in both Project Pro and in
PWA.
My hunch is that the Cumulative Update and Service Pack which were applied to try and resolve the failing "Hired Resources Report" in Portfolio Analysis, which sadly it didn't resolve - has probably provoked this interesting challenge as it is
the only material thing to change on the Server during the time that this issue has manifested itself.
Am I the only one to encounter this?
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Wizard based Visual Studio project template selection

I wish to create a wizard based solution, which would allow a user to choose the type of project template he would wish to load.
In Visual Studio, for example, upon selecting a Win32 console project, the user has a chance to have MFC / ATL support, SDL support etc, or he may not.
On similar lines, I wish to provide a user the choice of selecting a 64 or 32 bit project template,with or without MFC support.
I can create a wizard for such an endeavour, and I can associate this wizard with the root project of a multi project solution, and can capture the input of the user. But how do I then select that particular project to be loaded for the user?
How does Visual Studio achieve this project selection, and what would I need to do to achieve the same?
Kindly advise. Thank you.

VC++ project system now supports the same .vstemplate based wizards, its just that they never bothered to convert the old ones, as they are rather large, and people that use them are familiar with them.
But if you poke around the ....\Common7\IDE\ProjectTemplates\VC directory, you'll see some examples of the newer style of templates in the Phone and Store directories, which contain the newer style templates.
If you want to build a project template that allows for selecting different (or multiple) project types, I'd recommend starting with a stock project template, and then create and add a custom IWizard assembly to it (much like that walkthrough I mentioned),
then add your additional "hidden" templates. To keep the hidden templates out of the New Project dialog. Then you can programmatically add them to your solution, per whatever
the user selects, in the UI you display in your
IWizard.RunStarted implementation.
I don't have an example of this finished, but I hope to have one done here shortly. It's basically a set of templates that will generate a Project or Item Template Project, and a VSIX wizard assembly project. Essentially, it's a template that will give you
the same results if you do that walkthrough on the VSX Arcana blog I mentioned earlier. I'm in the final stages of cleaning it up, and will hopefully have it posted up on codeplex and the VSX Arcana blog later this week.
Sincerely,
Ed Dore

How to play wav files with Garageband/Midi keyboard

Hello,
I'm using Garagband (on my MAC, not iPad) and a midi keyboard for making songs. I just got a couple of cd's from Miroslav Philharmonik, but the sounds are all in standalone WAV files. There is no installation required. How can i use these sounds with Garageband? Must i copy/paste them in a specified directory on the HD? Or is a sample library necessary? I tried drag and drop, but that dind't work out...
Thanx in advance for your help.

this should help:
import com.ms.win32.*;
public void play()
          try
          URL url = new URL("file","C:\\","Hallo.wav");
          String wav= new String(url.getHost()+url.getFile());
          Winmm.PlaySound(wav,1,1);
          catch(MalformedURLException e)
or something like this ;))
Quaxi

Project template uploaded-Subtasks not appearing

Hi,
can anybody please help me?Project template had loaded in the system.while trying to amend the subtask,its not appearing.
Where the issue wud be? Please help me in this regard.
Thanks a lot in advance.

Hi
Use the form to look at the template itself.
Go to Projects Setup > Projects > Projects Templates and query for the template. Open the form and look at projects Option for the option Tasks. Open that form to see the existing WBS.
Dina

Project template distribution

Hi,
I made a project template that I want to use for all my projects. It includes controls, VIs and a specific archtiecture in the project view (autopopulating folders, etc...).
Is it possible to create a project template such as a VI template ?
If not, is there a way to use an installer to copy all files in a specific folder, rename a part of VI and control names, and have the project running ?

Hi zyl7,
If i well understand what you want to do, you would like to create a project template and to use it for several projects. The best way for you to do that is to create your project and save it in a folder as your template project. When you will need to use this to implement a project you will just have to open it rename it and build your project.
This way is the same thing as if you had a project template.
There is another discussion in the forum that could interest you, here is the link:
http://forums.ni.com/ni/board/message?board.id=170&message.id=172972&requireLogin=False
Regards,
Jérémy M. | Certified LabVIEW Developer
Design Engineer - LinkedIn - Contact
Don't forget to give Kudos to good answers.
N'oubliez pas de donner un compliment aux bonnes réponses.

Project Template is not in the selection list while creating the Project

Hello
We have created a template for a project type in cProjects. When i try to create a project by copying the template and choose "Template Type" as 'Project Template' and 'Project Type' then in the field of 'Template' i cannot see the templates which are created for the selected project type.
what could be the reason?
thanks in advance
Ashish K

Hi
1. While creating the template, you should maintain the project type for which this template would be used. I believe you would have done this.
2. The template has to be released. only after this, it can be used as a template to create projects.
Regards,
Maniraj

SB X-Fi XtremeGamer on Vista, trying to get Virtual Midi Keyboard to work with Reaso

I've got a Vista 32 quad core computer with the Sound Blaster X-Fi XtremeGamer sound card. I'm trying out Reason 4, an advanced music production program that needs a midi keyboard. I downloaded Maple Midi and Virtual Midi Keyboard so I can try it out without buying a real midi keyboard.
The Virtual Midi Keyboard makes no sound when the Maple Midi ports are selected which are the only ones that Reason 4 can see, and when selected Reason acknowledges when I press a note on the keyboard though no sound. the other Midi ports 2-SB X-Fi Synth A, B etc make sound but Reason 4 can't see them.
And then using Soundfont Bank Manager I see a virtual keyboard and it shows the 4 Maple Midi ports and makes noise with any of them selected but Reason 4 can't seem to see or select this virtual keyboard.
Any ideas? I'm new to music and audio editing, so it may be something obvious that I've overlooked.

Yes, its showing up in the device manager and states its working properly with no errors, I tried uninstalling/reinstalling it in 3 of my PCI slots.
The first time I installed it, I uninstalled my onboard sound like the intructions stated before I installed the new one, why I had to reformat and start from scratch so I can manually disable it in the BIOS because all that is on my partition.
The only thing that comes up with the card to pick from is my MIDI player, but nothing else, but even with that I get no sound because I cant raise the volume on any volume control.

Missing project templates and quiet MIDI keyboard?

Similar Messages

Maybe you are looking for