Missing Query Views

Hi,
We are randomly missing query views in our production system across many dataproviders. This was not done manually by any user ie deleting views. Frequency of the missing views can be once in 40 - 50 days and hundreds of views get deleted from the system. We do not have any jobs performed in the background process for deletion.
In our SQL cache we noticed the class "CL_RSZ_WWW_DB_INTERFACE" with the statement "DELETE FROM RSZVIEW WHERE VIEWID = "A0 AND OBJVERS = :A1# but not able to locate where it originated from because of missing log and trace file information for the activity.
SAP at this point not able to confirm what would have caused to delete the views randomly from the system. We are still investigating and trying to find whether bookmark reorganization or deletion can cause the views to be deleted because of bugs in the system.
Is there any one in the community faced the similar kind of issues.
Thanks
Suresh

Hi
We have experienced the same problem and checked for any program that may have caused this.
After some investigation we have found out that by running the FM RRMX_WORKBOOKS_DELETE without the parameter for OBJECT_VERSION, ALL views in the system were deleted, even though you have specified a Workbook ID.
Please check whether you have run this program.
Hope this helps
Tim

Similar Messages

Query View missing in the BI Content

Hi
I want to install a 3.x Web Template which is using a Query View as the dataprovider, but the Query View is not available as D-version and hence the Web Template throws an error that the query view is missing and hence cannot execute the web Template.
I have checked in the tables : RSZWVIEW and there is an entry but there is not object in RSORBCT to install.
SAP BI_CONT version 704 level : 003
When i try to activate the D-version of the query view the it gives the following message:
*Object 0CSAL_C07_Q0101_V01 (Query View) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object of type have also been collected. Object 0CSAL_C07_Q0101_V01 of type Query View was among these objects.
However, this object 0CSAL_C07_Q0101_V01 of type Query View is not available in the metadata repository.
System Response
Object 0CSAL_C07_Q0101_V01 of type Query View is ignored in further collections. The links for object of type are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example.*
Please let me know incase of any other info required.Thanks!

Hi Kumar....
Go to Datasource Repository(RSA2)................give the datasorce name and click on display.......from there u will get the extract structure name......copy it ...........go to SE11.............In the table field give the Extract structure name.............and click on the Where used list in the top.................from there u will get all the program name/Function module............where this extract structure is used...........copy that name and open it through SE37................
Hope this helps..........
Regards,
Debjani........

Deletion of Query View in Web Report

Hi,
I need to provide the functionality to Delete the Query View in the Web Reports.
Please suggest how this can be done.
I am new to web reporting and any help is highly appreciated.
Thanks and Regards,
RajKumar.

Hi,
We have built a template that is extension of standard template 0ADHOC_TABLE provided by SAP. In our template we have added OPEN view and SAVE view APIs mentioned in SAP documentation to provide the features to open a query view and to save a query view. Now we need to provide a feature to delete a query view functionality to users as there were many old saved views that are no longer relevant and needs to be deleted.
Unfortunately the open view screen that opens does not provide feature to delete the query view.
Request your help on this, how did you provide this feature to the users. what did we miss?
For more clarification, I would speak to you please provide me your contact number.
Thanks and Regards,
Satya Raj Kumar.

Different query view format not shown

Dear Gurus,
I am kinda new to WAD; Here I made 2 different query views(Different format) and used 'Query View Selection' in WAD. But somehow, when i choose different query views from the drop down list, the format of the result all seem to be the same(as the first chosen one). Is there any setting that i might have missed out?
And here is another question, can i possibly fill 'Query view selection' from different Query? and how to do that ?
It's quite urgent for me, please help out ASAP.
Thanks a lot~~ Points will be rewarded~~
Charlie Lin

In the property of the drop down box, you should have property called affected area, in that select both the query views you want to see and you should see different result as you change the drop down box.
And also make sure your data provider for both of the views are different, need to create a new for the next one.
thanks.
Wond

RDS Query Viewer - Rows Returned Limit

If you run a query within the RDS Query Viewer and the recordset is larger than 50 rows, only the first 50 are displayed. It would be nice to have the option to set the maximum (or have no maximum at all).
I realize there are a variety of database plug-ins and tools as noted on Charlie Arehart's blog. Most of these would get around this cap of 50 rows, but seeing as how we already have some database querying capability within the RDS toolset it would make more sense to just have it all in one place. I even find RDS Query Viewer useful for running other CRUD operations such as UPDATE, DELETE and INSERT.
If for some reason Adobe is feeling the Christmas spirit at this time in the year, then making the recordset grid copy-and-pasteable would be a hot feature to have as well.

Good point, Jose. I'd missed that myself. And I just noticed this limit of only the first 50 was the case for the Adobe Eclipse Extensions for CF8, too.
I guess in that respect I'd say that the fact I'd not noticed it until now in interesting: I've just used the feature to get a sense of what data is typically in a given table and its columns. For that, the first 50 are enough. But sure, if one wanted to browse all the records, being able to skip through would be nice (you could do that in Dreamweaver's RDS-based database viewer, which showed 25 at a time. Interestingly, HomeSite+'s database viewer simply showed all data.)
But sure, it might be nice to see paging through the records in CFBuilder's viewer. I could see how the ability to copy text from the grid can help, too.
And thanks for the mention of my CF411 site, Jose.
/charlie

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

Error while saving a query view

Hi All,
I am trying to save a query view in my favourites and it is failing with below message:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
I have created many query view so far, this issue has just started. Could you please help us with this, as it is very urgent.
Thanks and regards,
Shashidhar.

Hi,
Please set the setting as described in note 337950, it will help to fix the issue.
solution:
Releasing the object changeability
This setting is only intended for production or test systems that are
set to not changeable. It is not suitable for development systems. For
this reason, this setting is only effective if at least one of the
conditions specified under 'Cause and prerequisites' is met.
Go to the Administrator Workbench (Data Warehousing Workbench,
transaction RSA1) -> 'Goto' -> 'Transport Connection' and choose 'Object
Changeability'. To display the function, you may have to enlarge the
window or press the arrow keys nearby.
In the following dialog box you can select the object types that you
want to be changeable, even though the system is set to not changeable.
These objects are not connected to the transport system; this means that
no transport dialog boxes are displayed. This only applies, however, if
the preconditions mentioned under 'Cause and prerequisites' are met.
First, after releasing an object type, only objects that are original,
that is, those that were created in this system can be changed. This
prevents changes to objects that were imported into the system. However,
changes to these objects may be overwritten again during a new
transport.
You can set all objects to changeable (even the ones imported into the
system) using the context menu (right mouse button), although this
setting is not recommended for the reasons mentioned above.
Thanks,
Venkat

Query View name not saved in "Analysis Grid Properties" under Data Provider

Hi BW World;)
We are on BI 7.0
I have created a BI workbook which contains a query view.
However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
Is this the normal scenario?
Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
Is this a bug?
Best
Stevo.... Points of course... Thanks in advance.;)
Edited by: bw4eva999 on Sep 10, 2009 4:40 PM spelling

Hi,
You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
So this is not a bug and this how its been designed.
If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
Though it looks like wierd,it is not a bug.
Rgds,
Murali

BEX Query Views - Reqd in PRD but need to create in Dev - Data Issues

Hello Bw Gurus
BI 7.0 ECC 4.7
We have a BEx Query in BI production which uses a work centre hierarchy. The user wants to create query views on this query to use in BI production.
Our normal transport procedure of a new development object would be BI DEV - QA - PRD
However the DEV environment does not have all the work centres and the data of PRD. So if the query view needs to be created in DEV then we could not set up the view correctly as there is not the workcenters or the data in DEV.
Hopefully that makes sense?
Apart from allowing Query Views to be created in BI PRD directly is there any solution?
Best,
Steve Jones

If you need exact char values for workcenter to create your views you can quickly create the master data (just the values you want) in Dev and use them to create the views...

Unable to open a query view in web analyzer

Hi All
In web analyzer i have saved a Query view, Using save as tab.
when i tried to open that Query view through open tab in web analyzer it is throughing some exceptional error.
Is this the right way to access the saved query view, can anyone help me with your suggestion?
Thanks
Sushma

Hi,
Check this
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/bc5c78da1e1bbce10000000a1553f7/frameset.htm]

What is the difference between query & query view in BI 7.0 ?

Hi Experts,
What is the difference between query & query view in BI 7.0 ?
Can anyone suggest me on this.
Thanks & Regards
Sameer Khan

Hi Sameer,
Pls find the below URL for Query&Query View
http://help.sap.com/saphelp_nw04/helpdata/EN/26/6de53cce129749893b008c627ede07/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/36/18788b6bca5d02e10000009b38f983/content.htm
Thanks,
John

Display Multiple reports in a single query view

Hi Team,
I have 3 similar reports for MTD, QTD & YTD.
While displaying the report in the portal.. I want to display the reports in a single view wherein the MTD report will be a default report for the input selections. whereas the QTD & YTD will be available as dropdown options in the same query view and the wll be executed for the same input selections.
Please advice how to design the view.
Regards
Sneha

Hi All,
I have created a Web Template for my requirement.
Now while adding the template to my Transport request, I am getting the following error message:
Object 'BTMP::0ANALYSIS_PATTERN_EXPORT' refers to the invalid object 'QU::'
Object 'BTMP::0ANALYSIS_PATTERN_INFO' refers to the invalid object 'QU::'
PLEASE ADVICE...
Regards
Sneha
Edited by: Sneha Santhanakrishnan on Aug 8, 2011 12:18 PM

Create A Query View!

Hi ALL
how to create a Query View for TeMplates?????
Thanks
BI Learner

hello,
Query views are saved version of query output with particulr navigational state
The advantages of query views are:
Query views can be used as the data providers when you are creating web templates.
They are also used as jump targets. They are created after you execute the query, from the Save button, you can Save View global, or save as jump target.
They can also be used to format the query e.g hide some characterictic, display/hide result rows, sorting keyfigures etc.
Reg migration:
All existing SAP BW 3.x queries can be edited with the SAP NetWeaver 2004s BEx Query Designer without further manual adaptation.
After editing with the SAP NetWeaver 2004s Query Designer, queries cannot be edited with the SAP BW 3.x BEx Query Designer anymore.
Queries created or adapted with the SAP NetWeaver 2004s BEx Query Designer will still appear in the Open Dialog of the SAP BW 3.x Query Designer, but they cannot be opened anymore
Views:
Query Views that were created before upgrade/migration will still run after a query has been changed with the SAP NetWeaver 2004s BEx Query Designer
In general query views do not need to be migrated
Regards,
Dhanya

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

Variable with proposed value in BEX Query View

Dear SAP-Gurus,
I have a Web Application with some views on one query. In the inital screen i show the popup for entering the global variable values. Now my question; is it possible to give a global variable used filled by exit and used in these queries a proposed value, receeived by user exit?
With normal query this works, but not with a query view.
any suggestions?
kind regards.
Jürgen

Hi,
if anyone has the same problem - you just have to set the parameter variables_clear=x in webtemplate.
same applies to bookmarks, if you want the variables to be filled by your exit.
regards
Jürgen

Missing Query Views

Similar Messages

Maybe you are looking for