Missing Records from R/3 Production to BW 3.5 Production
Hi Experts
I am working on SAP BW 3.5 Version
When I am Loading data from R/3 Production to BW 3.5 Production half of the Sales Documents are Missing and I have done right LO-Cokpit procedure properly for
2LIS_11_VAITM
2LIS_11_VAHDR
2LIS_13_VDITM
2LIS_13_VDHDR
still problem
Kindly let me know on urgent basis( why it happens )
Thanks in Advance
Hi,
You can do the following checks.
a) check whether you have any selections specified in your infopackage selections,
b) check whether you have multiple PSA data packages for the same request, if yes, may be you have to select all the PSA packages to check on the values.
Best Regards,
Raj
Similar Messages
-
Missing Records from R/3 Production to BW 3.5 Production (Sales Documents)
Hi Experts
I am working on SAP BW 3.5 Version
When I am Loading data from R/3 Production to BW 3.5 Production half of the Sales Documents are Missing which are start with Alphabetical and I have done right LO-Cokpit procedure properly for
2LIS_11_VAITM
2LIS_11_VAHDR
2LIS_13_VDITM
2LIS_13_VDHDR
It Capture only Numerical sales Documents, but there so many alphabetical Sales Documents like
Ex:
BPCL-KOCHI
CHEMPLAST
DEGREMONT
E125012800
F085012605
Y00P4A010G
Kindly let me know on urgent basis( why it happens )
Thanks in Advance
SumaHi,
Have you done an init on 11 extractors.
If not do an init (Filling of the Setup tables) without any selections.
What I think is happening here is that in your init selections you have put a numerical range for the document numbers. Thats why the alphabetical docs are not comming.
Check this and let me know if this helps.
Regards,
Jadeep -
How to get missing records from one table
I have one table with many records in the table. Each time a record is entered the date the record was entered is also saved in the table.
I need a query that will find all the missing records in the table.
so if I have in my table:
ID Date Location
1 4/1/2015 bld1
2 4/2/2015 bld1
3 4/4/2015 bld1
I want to run a query like
Select Date, Location FROM [table] WHERE (Date Between '4/1/2015' and '4/4/2015') and (Location = bld1)
WHERE Date not in
(Select Date, Location FROM [table])
and the results would be:
4/3/2015 bld1
Thank youDo you have a table with all possible dates in it? You can do a left join from that to your above mentioned table where the right side of the join is null. If you don't have a table with all possible dates you could user a numbers table.
Below is one way to achieve what you want with a numbers table...
DECLARE @Table table (ID Int, DateField Date, Location VarChar(4))
DECLARE @RunDate datetime
SET @RunDate=GETDATE()
IF OBJECT_ID('dbo.Numbers') IS NOT NULL
DROP TABLE NUMBERS
SELECT TOP 10000 IDENTITY(int,1,1) AS Number
into Numbers
FROM sys.objects s1
CROSS JOIN sys.objects s2
ALTER TABLE Numbers ADD CONSTRAINT PK_Numbers PRIMARY KEY CLUSTERED (Number)
INSERT INTO @Table (ID, DateField, Location)
VALUES ('1','20150401','bld1')
,('1','20150402','bld1')
,('1','20150404','bld1');
WITH AllDates
as
SELECT DATEADD(dd,N.Number,D.StartDate) as Dates
FROM Numbers N
cross apply (SELECT CAST('20150101' as Date) as StartDate) as D
select *
from AllDates AD
left join @Table T on AD.Dates = T.DateField
where ad.Dates between '20150401' and '20150404'
AND T.ID IS NULL
LucasF -
Missing Records from SMQ1/RSA7
Hi Everyone,
During the upgrade of BI system, the SMQ1/RSA7 did not clean, which lead to missing of records for only one day from queue. But now the BI system is extracting regular data apart from that day.
Can you please help me, how we can get the records for that day in our BI system?
If you need any details, please let me know.
Thank You
Kind Regards
AnukulHi Anukul,
If you have DSO in between then you should execute the Full load Repair IP with same selections as that of delta load.
If you do not have any selections maintained for delta load then you can simply execute Repair IP without any selection.
But do remember that if you directly load this data to Infocube then there will be data duplication, for directly loading data to cube you will have to do the selective deletion first.
Regards,
Durgesh. -
is there any inexpensive solution to record from a tv?
Besides the expensive iRecord product?Do you mean to record TV programs on your computer or to record them from an actual TV?
If you have a Mac have a look at www.eyetv.com -
Loading issue..missing records .. randomly
HI ALL,
Thanks for ur replies.
We found on 11/09 some records are missing from last 6 months ( 3 to 4 records for each group with diff dates) in daily delta loads 1pm.
It is very difficult to load each group as full loads on that dates.
We did repeat delta with no selections on 12.09.2005 at 9 am (loads 8 million rec) and on the same day daily delta also run at 1pm( it also loads 8 million rec) . Finally we seen on 13/09 we get duplicate records. We forcibly removed these request which we had run on 12th (i.e Repeat Delta & Delta). Those were now in reconstruct tab.
How to get my missed records from 6 months? How to handle this with out effecting cube data?
Can we do selections in repeat delta / delta cases?
Initialization was done on 04/04/2004.
What is the reason for missing these recors?/
pls tell the step wise.
Please guide me.
Regards,
SrilakshmiHi Roberteo:
It is 2.X , I think so, its not possible Full repir request here.
You Mean 1)re-init with transfer/without transfer ? selection?( before this we should remove previous init load) 2) then daily delta.
I am thinking :to do like this , please guide me:
My suggestion would be since we have the option of transfered date in the selection conditions of infopackage , what we have do is we can do selective deletion of the contents of last and current month based on the closing date of the HR system and load only that data .
For ex: if you want to delete the contents of MAY 2005 and June 2005 , and the delta failed lies in the month of May 2005. so delete the two months and load only May 2005 in a separate infopackage. After that you can continue your normal loads with the month June 2005. By this way we wont miss any data as you are loading to cube no problem of duplication.
Is it advisable??
cheers,
sri -
Missing records in BW Production
In BW production system, while running reports, we were able to identify few records loaded on 11/1/2005 that are missing from BW. The recurring theme is records entered on 11/1/2005 in PA R/3, are not loaded(delta) in the ZCOPAE001 custom cube in BWP.
We checked the TR & UR there were no issues.
PSA check was also done. Perfect.
records in PSA - 717
records loaded in the data target - 717
I don't know what checks to be done in the source system.
or
Clues to proceed further..
It would be great, if some one will share the information/steps. Resolution of this issue is urgent. Please help me.Hi Manoj,
Thanks a lot for ur quick reply. We are loading data for Header, Item and conditions in BW, we are not doing any transformations anywhere from R/3 BW, its all 1-2-1 mappings.
We have been loading this for last 2 yrs, it suddenly started misbehaving. I suspect there must be some job which might be deleteing the records from RSA7, but im not sure if there is any prog or job which does this.
Thanks
BN -
Missing records while fetching data from Data mart
Hi,
I have some missing records in the ODS.The data is fetched from the other BW system.
It is a delta load & all the loads are succesfull as of now.But still some records are missing.
If i see in reconstruction tab, some requests are showing the Transfer structure status as clock(transfer stucture has changed sine the last request). Is it because of this time stamp status got changed ?
I have done reinitialization & the missing Datas are fetched .But i would like to know the cause of missing records.
Regrads,
ANitaHi kedar,
If there was a time stamp difference ,the data load should have got failed.All the delta loads were succesfull.
But now they realised there are some missing records.Just for analysis purpose , i was looking into reconstruction tab & the transfer structure status was displayed as clock.
But actually there was no change in the transfer stucture.
Sometimes we used to get timestamp error &
we used to replicate the data source & activate the transfer structure.
To avoid these things in future what needs to be done.As this load gets triggered through process chain & each time the data load status was succesful.
Every time we cant do replication of datasource while loading through Process chain unless the transfer structure gets changed.
But my concern was is this the cause for missing records or something else.
Regards,
ANita -
Insert missing records dynamically in SQL Server 2008 R2
Hi, I am working on a requirement where I will have to work on some % calculations for 2 different states where we do business. The task that I am trying to accomplish is technically we need to have any Product sales in both the states if not for instance
in the following example ProductC does not have sales in OR so I need to insert a record for ProductC - OR with 0. This is an intermediary resultset of all the calculations that I am working with.
Example Dataset:
CREATE TABLE [dbo].[Product](
[Product] [varchar](18) NOT NULL,
[State] [varchar](5) NOT NULL,
[Area1] [int] NOT NULL,
[Area2] [int] NOT NULL,
[Area3] [int] NOT NULL,
[Area4] [int] NOT NULL,
[Area5] [int] NOT NULL,
[Area6] [int] NOT NULL,
[Area7] [int] NOT NULL,
[Area8] [int] NOT NULL,
[Area9] [int] NOT NULL,
[Area10] [int] NOT NULL,
[Total] [int] NULL
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','OR',0,0,2,0,2,0,0,0,0,0,4)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','WA',0,0,1,0,0,0,0,0,0,0,1)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','Total',0,0,3,0,2,0,0,0,0,0,5)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','OR',0,0,5,0,0,0,0,0,0,0,5)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','WA',0,0,2,0,0,1,0,0,0,0,3)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','Total',0,0,7,0,0,1,0,0,0,0,8)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductC','WA',0,0,0,0,0,0,0,0,0,1,1)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductC','Total',0,0,0,0,0,0,0,0,0,1,1)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','OR',5,2,451,154,43,1,0,0,0,0,656)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','WA',0,20,102,182,58,36,0,1,0,0,399)
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','Total',5,22,553,336,101,37,0,1,0,0,1055)
How to accomplish this in SQL Server 2008 R2.
Insert missing record:
INSERT INTO [Product] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductC','OR',0,0,0,0,0,0,0,0,0,0,0)
Thanks in advance......
IoneCREATE TABLE [dbo].[Products](
[Product] [varchar](18) NOT NULL,
[State] [varchar](5) NOT NULL,
[Area1] [int] NOT NULL,
[Area2] [int] NOT NULL,
[Area3] [int] NOT NULL,
[Area4] [int] NOT NULL,
[Area5] [int] NOT NULL,
[Area6] [int] NOT NULL,
[Area7] [int] NOT NULL,
[Area8] [int] NOT NULL,
[Area9] [int] NOT NULL,
[Area10] [int] NOT NULL,
[Total] [int] NULL
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','OR',0,0,2,0,2,0,0,0,0,0,4)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','WA',0,0,1,0,0,0,0,0,0,0,1)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductA','Total',0,0,3,0,2,0,0,0,0,0,5)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','OR',0,0,5,0,0,0,0,0,0,0,5)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','WA',0,0,2,0,0,1,0,0,0,0,3)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductB','Total',0,0,7,0,0,1,0,0,0,0,8)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductC','WA',0,0,0,0,0,0,0,0,0,1,1)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductC','Total',0,0,0,0,0,0,0,0,0,1,1)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','OR',5,2,451,154,43,1,0,0,0,0,656)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','WA',0,20,102,182,58,36,0,1,0,0,399)
INSERT INTO [Products] ([Product],[State],[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])VALUES('ProductD','Total',5,22,553,336,101,37,0,1,0,0,1055)
;WIth mycte as (
Select Product,State From (Select distinct Product from Products) p, (
Select distinct State from Products) s
Insert into [Products](Product,State,[Area1],[Area2],[Area3],[Area4],[Area5],[Area6],[Area7],[Area8],[Area9],[Area10],[Total])
Select m.Product,m.State
,0,0,0,0,0,0,0,0,0,0,0
from mycte m Left Join Products p on m.[Product]=p.Product and m.State=p.State
WHERE p.Product is null and p.State is null
select * from Products
Order by Product
,Case when State='Total' Then 2 else 1 End
Drop table Products -
Select records from one database and insert it into another database
Hi
I need to write a statement to select records from one database which is on machine 1 and insert these records on a table in another database which is on machine 2. Following is what I did:
1. I created the following script on machine 2
sqlplus remedy_intf/test@sptd @load_hrdata.sql
2. I created the following sql statements in file called load_hrdata.sql:
rem This script will perform the following steps
rem 1. Delete previous HR data/table to start w/ clean import tables
rem 2. Create database link to HR database, and
rem 3. Create User Data import table taking info from HR
rem 4. Drop HRP link before exiting
SET COPYCOMMIT 100
delete from remedy.remedy_feed;
commit;
COPY FROM nav/donnelley@hrp -
INSERT INTO remedy.remedy_feed -
(EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR) -
USING SELECT EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR -
FROM ps_rrd_intf_medium -
where empl_status IN ('A', 'L', 'P', 'S', 'X')
COMMIT;
EXIT;
However, whenever I run the statement I keep getting the following error:
SP2-0498: missing parenthetical column list or USING keyword
Do you have any suggestions on how I can fix this or what am I doing wrong?
Thanks
AliThis doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/
-
Delete 50 Million records from a table with 60 Million records
Hi,
I'm using oracle9.2.0.7 on win2k3 32bit.
I need to delete 50M rows from a table that contains 60M records. This db was just passed on to me. I tried to use the delete statement but it takes too long. After reading the articles and forums, the best way to delete that many records from a table is to create a temp table, transfer the data needed to the temp table, drop the big table then rename temp table to big table. But the key here is in creating an exact replica of the big table.I have gotten the create table, indexes and constraints script in the export file from my production DB. But in the forums I read, I noticed that I haven't gotten the create grant script, is there a view I could use to get this? Can dbms.metadata get this?
When I need to create an exact replica of my big table, I only need:
create table, indexes, constraints, and grants script right? Did I miss anything?
I just want to make sure that I haven't left anything out. Kindly help.
Thanks and Best RegardsCan dbms.metadata get this?
Yes, dbms_metadata can get the grants.
YAS@10GR2 > select dbms_metadata.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST') from dual;
DBMS_METADATA.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST')
GRANT SELECT ON "YAS"."TEST" TO "SYS"
When I need to create an exact replica of my big table, I only need:
create table, indexes, constraints, and grants script right? Did I miss anything?
There are triggers, foreign keys referencing this table (which will not permit you to drop the table if you do not take care of them), snapshot logs on the table, snapshots based on the table, etc... -
Missing documents from 2LIS_03_BF/2LIS_03_UM
We discovered that on one day last week for a few hours most if not all material and accounting documents were not getting captured coming from 2LIS_03_BF and UM.
We've been live using 2LIS_03_BF and UM since May of last year and never had any trouble with missing documents from the inventory extractors until last week, and are not sure what could cause this?
We patched things up by identifying the missing documents and loading those into BW doing new initializations/full repair requests. Everything seems fine now, but we'd like to know how to prevent this in the future. Has anyone experienced this before where suddenly LO documents are not getting captured?
We found OSS note 766622 which allows for a logging feature for application 03 (LO-IM) but are not sure what kind of system overhead this will cause. Has anyone else implemented this note and could comment on any impact on the R/3 production system?
Thanks,
ChrisHi Chris,
you are not the first and probably you will not the last to face similar problem with inventory management: I already saw similar situation, but I never found a customer with this OSS Note applied (that, among the other thing, is not a solution, but an activation of a log system in order to hope to understand something next time will happen a similar problem)...
If SAP support has this type of approach in its OSS note I think that the answer to your doubt will remain unanswered: the cause of this problem is not known and (as you can understand from your experience) it's really hard to understand what's happened !
The only way to go is applying the log system as per OSS Note and hoping (what a paradox !) that the problem will raise again !!!
If you apply the note, I don't believe that you will see relevant performance impact (even if you have to write on TMCEXLOG table), but this depends from the average number of your material movements/delta records...
Bye,
Roberto -
CUBE Not getting All records from DSO
Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
SamWhy multiple threads ????
-
Insert old missing data from one table to another(databaase trigger)
Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT NUMBER(2);
V_TIME_OUT DATE;
V_DATE_IN DATE;
V_DATE_OUT DATE;
V_TIME_IN DATE;
V_ATT_FLAG VARCHAR2(3);
V_EMP_ID NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM ACCESSLOG
WHERE LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID = EMP.EMPLOYEEID
AND DATE_IN = EMP.LOGDATE
AND ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
,TIME_IN ,TIME_OUT,ATT_FLAG)
VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_IN
NULL,
TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_IN
NULL ,'I');
ELSIF V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
SET DATE_OUT = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
TIME_OUT = TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
ATT_FLAG = 'O'
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_IN <= (SELECT MAX (DATE_IN )
FROM EMP_ATTENDANCEE
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL )
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
Regards,
Abdetu..INSERT INTO SALES_MASTER
( NO
, Name
, PINCODE )
SELECT SALESMANNO
, SALESMANNAME
, PINCODE
FROM SALESMAN_MASTER;Regards,
Christian Balz -
Incomplete Data on report (report does not show all records from the table)
Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek
Maybe you are looking for
-
Output Link and Command link problem
I have this command link that I want to redirect to a certain url, a complete one with the Http://www.webpage.com.. and its value is Goto This Page.. lets say I want it to pass through a certain backing bean before redirecting how am i supposed to do
-
Hi All, I am getting below error message when i am starting JBoss Anyone has any idea, why it is happening? Full thread dump Java HotSpot(TM) Server VM (1.4.2_05-b04 mixed mode): "RMI ConnectionExpiration-[127.0.0.1:33030]" daemon prio=1 tid=0x2a375e
-
Problems using Oracle or MSSql DBMS with Weblogic 5.1 SP6
We have installed Weblogic 5.1 with service pack 6 on NT 4.0. The database access works fine with the default Cloudscape, but when we try to use the SQL scripts for Oracle supplied by BEA, we keep getting rollbacks. We have also tried to modify the S
-
ACE WAF XML Gateway 6.1.1 - arbitrarily monitoring and filtering
Can someone explain why the ACE XML Gateway is monitoring some events and filtering others, when they are the same events? I have all mParamAll System Command injection signtatures in monitor mode on the firewall profile that is applied to both of th
-
HD space continuously decreases while using Mavericks?!
I know this behavior is indiciative of page outs, which can no longer be monitored with Activity Monitor. After upgrading to Mavericks, I experience lag while scrolling PDFs in Preview (so bad that I have to keep quitting and reopening the applicatio