"Missing" rendered files when quicktime exporting

Hello,
when finished a project, everything rendered, everything looking fine, I go to File > Export > Using Quicktime Conversion... (to go to idvd and mount de dvd).
But then, he tells me a file (a render file) cannot be fount and, thus, cannot export the movie. Everything is rendered and I never go to any scratch folder and never deleted any file anywhere...
What can I do? Please help!
Thanks.
Josep

First, if you're going to iDVD export using QuickTime Movie (not Conversion).

Similar Messages

Adobe Premiere CC 2014.2: losing rendered files when using warp stabilizer

Hi,
I am constantly losing rendered files when using the warp stabilizer. So far I have tried about every hint I could find on the web such as cleaning the cache, rebuilding the rendered files, creating additional sequences etc etc.
Honestly I am getting tired of using a product that isnt cheap in the first place to rent and where a bug like this apparently persists over several product versions without being fully fixed (I have had this problem throughout 2014 but according to forum postings others seem to have problems with much earlier versions as well).
I would be really grateful if somebofy has any suggestion how this can be addressed.
I am also happy to help testing fixes - if there are any fixes available.
Thanks a lot and Happy New Year!
Martin

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Where is the file when you export from share to you tube?

1. where is the file when you export (share) to you tube?
I want to use the moivie again in another movie or DVD menu or just to save it etc. I cant't find the location after uploading to you tube.
The only way to this can not be "export to media" or devices and from there to you tube?
2. Does it make any differances for the quality on you tube wich way you choise?
thanks, bruce

Yes, i found it there. In fact; a logic place...
The second q. means the way you load upo; dirtectly from the menu share to you tube of first make a QT and from there to the sky.
I quess there must be no differance but you never know...
Thanks again.

Missing Source files when exporting to Soundtrack and LiveType

An extremely frustrating "glitch" has occurred. When exporting to LiveType or Soundtrack, I receive and error message telling me that one or more of my source files are missing. I had been editing with these files in FCP 5 for the past few days with no problems. Initially I had no problem exporting to LiveType. Yet, today when I exported to Soundtrack Pro and subsequently LiveType, my source files just disappear. I have found some references to this issue in the discussions, but found no solution. If someone has found a solution since the last posting, please inform of it.
Demetrius

Export the clip using current settings.
Then open that in LT, and work with it independently.
Then export is and import it into FCP and use it to replace the original clip in the sequence.

Why does PrP CC export an AVC codec file when I export an H264??

Hey everyone,
I'm new to PrPro from FCP7. I'm so used to exporting a .mov file with H.264 compression and I can't believe that I can't do that inside PrPro. I'm sure it must be something simple that I am not seeing. When I export H264 from Media Encoder I end up with an .mp4 file which if I open in QT and look at the specs says that it's an AVC codec and it won't even show me the data rate... It's really annoying and quite frankly looks like a mistake to me, even though the file "looks" good. Can someone please explain to me what I'm missing here??
I really appreciate any info on this. Thanks in advance!!

A very common and way-too-easy problem. Formats & codecs & "wrappers" are confusing enough the whole concept HAD to have originally been thought up by some particularly frustrated, ignored, and venal low-level bureaucrat just to get his revenge on the world. Unfortunately for us, he succeeded beyond anything he could have imagined.
Neil

I keep on getting the message "missing .dll file" when I try to install Itunes on Windows 7 what is wrong ?

I am using Windows 7 (64) and keep on getting the message of "missing .dll files" after I attempt to install the latest version of ITunes. I attempted to install an earlier version and had the same results. I have uninstalled and reinstalled ITunes to no avail. I have queried this message on Google and found little to go by.
Can anyone help from here ?

This has just happened to me - again. Can't think what caused it. I uninstalled Quicktime a little while ago, maybe connected? I don't know. Uninstalling iTunes, or repairing, or a fresh iTunes install does not help
Even if you keep downloading and putting the dll files it keeps asking for in the sysWOW64 and/or System 32 folder, Apple Mobile Device Support will not not 'start' from Services.
Anyway, as well as itunes, you need to also un-install Apple Software Update, Apple Mobile Device Support, and Bonjour, then reinstall the latest iTunes to get it all working again

I get the error message "Missing PDFMaker files" when trying to convert a microsoft word document(.docx)

When I right click the word file and select Convert to Adobe PDF, I get the error message "Missing PDFMaker files".
Im using Windows Vista Home Premium, Service Pack 2, 32 bit operating system.
Im using Microsoft Office Home and Student 2010
I have Adobe Reader X installed
Thanks

Hi RhodaMcP,
You might want to check the KB: http://helpx.adobe.com/acrobat/kb/troubleshoot-acrobat-pdfmaker-problems-office.html
Regards,
Rave

Recovering Video File when Quicktime 7.6.6 relaunches

Hi
I was in the middle of a wonderful interview with a Human Rights Activist when Quicktime QUIT unexpectedly. I relaunched the program and continued the interview on another file. Only now I cannot find first file anywhere. Anyone know if it's possible to recover lost video files? Looked in trash, files are garbage, no movie exists. Help!
Lolo

Update: The problem only happens with MacOS 10.5.6. Running the pre-installed MacOS 10.5.5 the 9400M and 9600M displays movies smoothly using QuickTime 7.6. Disabling hardware-accelerated playback by deleting the "AppleVAH264HW.component" in "/System/Library/Quicktime" also "solves" the problem.

Missing patch files when applying patch

Hello
I have been trying to apply the Oracle 8.1.5 patch and I have
followed the instructions given. On running the script
(sh linux815patch.sh)it goes through the motions of installing
the patch for about a second and then stops with a message
"missing patch files". I have dowloaded the patch from two
different locations twice and it still gives the same problem.
Has anyone come across this and how was the problem solved ?
Many thanks
null

Mikael Hallendal (guest) wrote:
: Sunday Oke (guest) wrote:
: : Alex (guest) wrote:
: : : Sunday Oke (guest) wrote:
: : : : Hello
: : : : I have been trying to apply the Oracle 8.1.5 patch and I
: : have
: : : : followed the instructions given. On running the script
: : : : (sh linux815patch.sh)it goes through the motions of
: : installing
: : : : the patch for about a second and then stops with a
message
: : : : "missing patch files". I have dowloaded the patch from
two
: : : : different locations twice and it still gives the same
: : problem.
: : : : Has anyone come across this and how was the problem
solved
: : : : Many thanks
: : : Be sure that there are no other files in the directory
where
: : : linux815patch.sh extracted.
: : : Remove them all from there.
: : : For example, linux_81501patch_ee.tgz can be there ;-)
: : Hello
: : I tried this, but it still doesn't work.
: : Please help
: If you run the command 'find . -type f -print | wc -l' (from
the
: install-script) the result should be 38, if not you have the
: wrong number of files in the directory (be sure to unpack the
: patch-tgz-file in a clean directory) and be sure to remove the
: tgz-file after unpacking it (I didn't and got a total file-
count
: of 39).
: Regards / Mikael
It works now
Many thanks
null

Missing header files when importing a shared library with labview 8.6?

Hi all,
I want to import a .dll into my .vi program but I am not able to do it...
I have created the dll following the ni website tutorial
http://zone.ni.com/devzone/cda/tut/p/id/3303#toc2
Once the dll has been created, I have tried to import it with
Tools-Import-Shared Library(dll)
After parsing the header file appears an error like this one:
void __cdecl Zdmt(LVBoolean *stop, double P, char channelName[],
    TD1 *errorIn, TD14 *FFTOptions, TD12 *Calibration, char FileName[],
    int32_t minRecordLength, TD26 *InstrumentHandler, LVRefNum sessionRefArray[],
    LVRefNum *queueIN, TD1 *errorOut, LVBoolean *averagingDone,
    HWAVES LastRecordFetched, TD24 *Impedance, TD17 *ColeColeCluster,
    TD18 *FFTcluster, TD5 *InstrumentHandleOutputCluster, LVRefNum *queueOut,
    int32_t *Acquired, TD6 *FreqTimeInfoCluster, double *averagesCompleted,
    int32_t len);
The following symbols are not defined:
LVBoolean; int32_t; LVRefNum;
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add predefined symbols. Click the Back button to return to the previous page of the wizard to add a preprocessor definitionsl (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
The following header file was not found in the specified header file or one of the referenced header files:
- extcode.h
To fix, click the Back button to go to the previous page and add the header file path to the Include Paths list.
I have replaced the first line #include "extcode.h" of the dll header file for #include "C:\Program Files\National Instruments\LabVIEW 8.6\cintools\extcode.h" that is the full path where the header file is located. However, new libraries seems to be missed:
- stdint.h
- MacTypes.h
Does anybody know what I have to do??
Any help will be really appreciated,
Regards,
Benjamin

If you use any of the LabVIEW cintools headers, they reference other headers too. The import wizard is written in a way that it simply skips parsing datatypes that can not be resolved due to missing header files. If your functions you want to import references such datatypes then you get an according error about any include files the wizard could not load, otherwise not. The wizard can not know which of the missing header files is the problem since it obviously doesn't know what would be in those header files.
The LabVIEW cintools headers are multiplatform, meaning they evaluate various compiler predefined defines to determine which platform they are included in. The import library wizard does not define any specific defines, since it is not really a compiler. So you have to define them. And they get adapted with each new LabVIEW version to support new compilers and compiler versions, so the defines described in the link in the first post do not have to be correct for cintools headers in newer LabVIEW versions.
All in all writing DLLs that interface to LabVIEW cintools headers should not be done by writing them and then importing them using the wizard but instead you should write the VI and create the Call Library Node, then let LabVIEW create a template C file from the context menu of the Call Library Node and copy that into your C sources and fill in the functions from there.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Rendering intent when displaying, exporting or soft proofing?

I am trying to make use of soft proofing to adjust my images for a given output device for which I have ICC profiles. The two profiles I am playing with are for a Lambda and a Fuji Frontier. The Lambda working space almost fits within Adobe RGB, it exceeds it in only a few places but is noticeably smaller for a number of other colors. The Frontier working space is for most colors a bit smaller than the Lambda and about equal for only a small number of colors. The Frontier working space would also almost fit into sRGB (to give you an impression of its size).
When soft proofing with Aperture, dark greens desaturate more with the larger Lambda working space than with Frontier one. If the rendering intent were relative colorimetric, colors should be clipped more and limited by the smaller working space of the Frontier. If perceptual is used then colors would in general be somewhat more compressed (ie, desaturated) with the smaller Frontier working space. But I see rather the opposite. In short, neither explanation makes sense.
So I tried exporting from Aperture into Adobe RGB and ProPhoto RGB hoping that both would be big enough to contain most of the internal gamut of Aperture in order not to require much compression or clipping when converting from the internal color space of Aperture (I saw no difference between Adobe RGB and ProPhoto RGB in the exported files, so I guess both are large enough for my purposes). And I then converted/soft proofed these files from Photoshop into my two output profiles. More options (different rendering intents, black point compensation) but none seemed to really match what Aperture was soft proofing. I still have a lot of ideas what to try out but if anybody could shed some light on rendering intents and soft proofing with Aperture, it would be very much appreciated.
(A related question, what rendering intent is used when converting colors, let's say defined in the Lab space in Photoshop, to the screen? I guess this is defined in the monitor profile, which in turn is created by the monitor calibration software, and therefore might depend on the latter. I would guess some kind of perceptual, but how the colors are really fitted and converted from the larger Lab color space into the smaller monitor one might very noticeably been different calibration software and will be different again for the monitor profile supplied by Apple.)

I went on about this a little more scientific by creating an image with three rectangles: red, blue and green.
All of them are 100%, e.g. (255, 0, 0). Colorspace: ProPhoto RGB.
Results when exporting the images to AdobeRGB and sRGB, concentrating on the reds:
- sRGB looks very washed out
- AdobeRGB looks a bit washed out
- Original ProPhoto has so much red that it almost drives me nuts
Now, I would really expect similar results when activiating soft proofing.
But when selecting either AdobeRGB or sRGB, the reds always drive me nuts.
There is just no difference at all to the original ProPhoto image!
Conclusion 1: Dorin, you were right, previews are in AdobeRGB. What I saw in the reds was the difference between ProPhoto and AdobeRGB. Somehow my screen seems to have extreme reds (calibrated recently with an X-Rite ColorMunki Display).
Conclusion 2: Soft proofing with AdobeRGB and sRGB really DOES NOT WORK!

Adjust output level of audio files in Quicktime export??

Hello...
I have been using Quicktime to create little ringtones (take an audio snippet, export as .aiff then convert to MP3 for my cell phone). However, the output of these ringtones played on my phone, compared to some other ringtones I have, is VERY loud.
I was wondering if there is a way either with Quicktime (where I export the .aiff file) or with iTunes (where I convert to MP3) that I can adjust the audio output level of the file so that it is less loud??
Thanks!!
Scott

I WAS WRONG. But there is a solution... record a screen movie using Quicktime (System 10.7 and 10.8).
Open Quicktime, in the file menu select "New Screen Recording," run your Keynote Presentation and the movie with sound will record if you use Soundflower.
Soundflower is a free program that can record system sound with QuickTime X, download at <http://cycling74.com/products/soundflower/>
In "Sound" system preference, set the output to "Soundflower (2ch)". (If you enable "Show volume in menu bar" you can Option-Click the volume icon in the menu bar to select audio devices.)
In QuickTime X's screen recording window, click the triangle near the top-right to select "Soundflower (2ch)" for the audio inout, then start recording. Keep the monitor volume slider in the recording window all the way to the left or else there will be echo on the recording.
You won't hear the sound while recording because it is going directly into QuickTime. If you beed to listen while recording, you will also need Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> Hijack the application producing the sound and use the "Auxiliary Device Output" effect to send audio to "Soundflower (2ch)", then make the recording.
When using Soundflower to send audio to and from applications, you may find that you are not able to send audio through another device to monitor audio output. In such situations you can use Soundflowerbed, an application that resides in the Finder’s Menubar allowing you to tap into Soundflower channels and route them to an audio device. To start the Soundflowerbed menu app go to the Soundflower folder in /Applications and within it open Soundflowerbed.app.

New ITunes...systematically misses one file when updating TAGS of an album

With the latest version of ITunes (811) I am confronted with an annoying behaviour.
I like to have comprehensive TAGS when I import an album...proper GENRE, name of ARTIST, YEAR, album COVER and so on. So I always verify, and if necessary update the tags.
Now, with ITunes 811, it always misses one of the tracks from the list of tracks I want to change.Consequently, I need to select this track and perform the complete cycle of Tag editing again...twice as much work, and a genuine irritation.
Any solution, known bug?
Thank
Patrick

Just wanted to add my 2 cents...
The original poster of this thread says it started on iTunes 8.11...well I'm using iTunes 10.1.2.17 and it's still doing it for me and has been for AGES. It is really frustrating. I highlight a whole album and add all the tag info because I am really pedantic about all of it being organized and all with proper names, artwork, etc.. Not every time but I'd say fluctuating between 50-100% of the time and normally about 90% of the time it will miss tag updates on one of the tracks. Normally the last one or towards the end of the album but it could be any, really. So what I do is I highlight the album, update the tags, click ok. Then before I even check if there's one track that didn't get the updates, I just immediately click 'Get Info' on all of them again and sure enough the tags will be empty on all the ones I just updated. This is because one track didn't get the updates so iTunes sees the selections as having one or more different values. So I put in all the values again. This could happen for any of the tags I update, including album artwork. So basically, when I do tag updates for an entire album I just always do the updates twice. I could search through and find the actual track missing the updates but I've found that this takes even more time. On the off chance that when I click 'Get Info' the second time and see that all the tags are updated I then jut hit cancel and move on, as I clearly don't need to put the tag updates a second time. But that hardly ever happens.
What's interesting is that before, without fail, one track would miss the updates and all the updates I did. So if I updated Artist, Album and Genre then one track would miss them all. Now sometimes the one track that missed the updates will pick up one or more of the tag updates but not all. This is actually more frustrating because it means when I highlight the entire album for the second time it gets confusing because my eye will quickly catch that some of the tags were updated, leading me to believe that 100% of the tracks caught the updates that first time but really if I look more closely I see that a couple of the tags didn't get updated.
There's actually a few buggy little issues like this in iTunes that I've noticed haven't gotten fixed over update after update after update of iTunes from Apple. I don't get it....
Also, why can't you add MULTIPLE artwork to more than one file at once? If you highlight an entire album and want to add the artwork for the front and back and CD of the album, then you have to choose one, and only one, picture which will obviously be the artwork for the front of the CD. Then, I used to manually go through all the tracks, go to the Artwork tab and then add the back or other CD artwork files. Now I just add the front artwork to all of them together, then click only the first track and add all additional artwork to only track one.
iTunes also has a little bug where many times after doing a search and it coming up with a list of music, such as "The Beatles", it will take about five seconds before it will let me scroll down the list and sometimes will take about five seconds before it will let me see the mouse pointer on the iTunes window. Anywhere else on either monitor I can see the mouse pointer but as I move it across the iTunes window it disappears until it pops out the other side as I keep moving my mouse.
I could keep going with this list but this thread is really only supposed to pertain to the first thread's topic so I've probably already said too much. We can't keep meeting up like this anymore or they'll find out.
Anyway, so that's that...

Missing .pdf file when loading template

Hey everybody,
I just switched from a PC to a Mac and found Pages pretty cool. I'm running the trial and made a few templates based on the business letter template that was included with the pre-installed Pages 2 on my MacBook. When opening my template I end up with a window showing me an error message that the file "businesscircle_logosgray.pdf" is missing. My template then opens up correctly but the error message is showing up every time I open it. When I copy its contents into an empty document and save it to another template it works 2 - 3 times but then I get the same error. The business letter template opens perfectly without any errors.
Is there any way to solve that problem?
Thank you in advance
Dominik
MacBook 13" (black) Mac OS X (10.4.8)

That sounds strange. businesscircle_logosgray.pdf is the spiral image above the word "Company" in the template. I assume you deleted it, when you made your own templates. It is supposed to be a place holder to replace with another image.
I would probably try recreating your new template and keep the image just in case. You could also try creating a new blank template and paste everything from the business template except that image. Hope you manage to sort it out.

Missing music files when loading iPod Classic.

I just finished converting all our albums and 45's to MP3 files. These all list and play fine in iTunes, but when I load the files on our iPod Classic, there are always about 50 songs missing. I have done this 4 times, and it's not always the same files, but always about the same number of files. The missing songs are about half missing at the beginning of the list, and half missing at the end of the list. I have 7455 files in iTunes, but after loading the iPod, there are around 7400 files actually on the iPod.
There is plenty of free space left on the iPod, The missing files are never the same songs as I try different times. The files are not corrupted, as they list and play okay in iTunes.
Any suggestions would be greatly appreciated. Thanks in advance for any help you might give.

"Other" means files that have become corrupt and the iPod no longer knows what to do with them.
The usual procedure is to move (or copy) your iTunes Library from your old computer to the new one. If the computer (or its hard drive) is not available, the procedure is to use the backup of the Library.
I'm guessing that you don't have a backup of your Library. Although your old computer has "died", do you still have the hard drive? If so, you could put the hard drive into a hard drive caddy, use it as an external device and copy the iTunes Library from that onto your new computer. A local computer repair shop should be able to help you with that.
Failing that, you will have to re-build your Library again.
If you purchased music from the iTunes Store, check in your store account to see if your country allows you to download the music (that you purchased) again.
If you purchased digital music from other stores, check with them to see if you can download the songs again. In Amazon UK, you can.
For music that you imported into your iTunes from CDs, you will have to import them again, from the CD.
For the future, I suggest you maintain a backup of your iTunes Library. If you now have an external hard drive in a caddy, use that. Otherwise, buy one, the larger the better.
Also, as you are now finding, an iPod cannot be put back into a new iTunes. Nor is it a backup of your Library. Everything should be in your iTunes Library - and backed up onto an external drive. The iPod is simply a portable "copy" of your Library, only for playing the music.
Sorry to be the bearer of bad news.

"Missing" rendered files when quicktime exporting

Similar Messages

Maybe you are looking for