Missing Renderer Message

I've been using the MPE Hack with my GTX 260 and now it longer works.  I get the Missing Renderer message when I fire up a project.  The one that says I will have to use the Software part of MPE and not the Hardware of MPE.  Anyway, I searched and read all the forum posts on this topic.  I downloaded the latest Nvidia driver for this card and that didn't fix it.  I did it twice just to be sure.  I also rolled the driver back to the one from last May and that didn't work either.  Hmmm?  Anyone with an idea of what might be going on?  I also went to the cuda_supported_cards text file and saw that my original hack was missing so I opened up Notepad and resaved it with the GeForce GTX 260 added but that didn't do it either.  Here is the list that shows in that text file.
GeForce GTX 260
GeForce GTX 285
Quadro CX
Quadro FX 3800
Quadro FX 4800
Quadro FX 5800
Thanks if you can help me.
Ragnar

Fixed it myself.  I was saving that text file in the wrong location.  All is right again.  Thanks for looking.
Ragnar

Similar Messages

  • Missing renderer message after updating

    HI
    I have just updated premier with Adobe Application Manager today, checked 'updates' afterwards and confirmed all is up to date.
    But now when I run the app I get a message entitled 'Missing Renderer' and it says the last time the project was open mercury was available that the mercury system is not available now and software only will be used- or words to that effect
    It always was available. I re-checked the supported cards text file and my card is there. Geforce GTX 260
    In about box, my version is 6.0.3 (001 MC264587)
    I am on windows 8 ultimate
    Help!
    Chris

    Hi All
    Thanks for your replies.
    Working now. It appears that after the upgrade, the entire Adobe directory on drive C became read only. I reset this and all works fine again
    No idea why, a strange but true story!
    Chris

  • Missing Renderer - GPU Acceleration Disabled

    Hi.
    I've been having a problem with premiere lately. When I create new project, the render settings are set for CUDA GPU acceleration. I have no issues while editing the project or when rendering preview files. However, once I save the project, quit premiere, and then later re-open the project, I am presented with the dialog "Missing Renderer" - "This project was last used with Mercury Playback Engine GPU Acceleration, CUDA, which is either not available, or not certified on this system. Mercury Playback Engine Software Only will be used."
    After this message, my timeline opens completely unrendered. I've attempted to change the project setting and reselect GPU Acceleration as the renderer, but the dropdown box is disabled in the project settings menu.
    Can anyone help me with this issue?
    Computer Specs:
    Intel Core i7-3537U
    8GB RAM
    NVIDIA GeForce 710M with 1GB Dedicated RAM
    Any help is appreciated.
    Thanks.

    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    -Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

  • "Missing Renderer" spreading like the Flu.

    Hi there-
    Seen a few posts about this on here, but all are PC based and I'm not confident the resolutions are applicable.
    Here is what is happening:
    We've got 4 edit bays. Identical MacPro 12 core towers. All with the Nvidia/PNY Quadro 4000 for Mac GFX card. In the past month, 3 out of 4 inexplicably have lost the ability to use the Mercury Playback GPU. We've had to go straight software at this point.
    We've gotten the 'missing renderer' error and nothing we attempt seems to fix it. Even a complete wipe of an edit system, reinstall of OS, drivers and Adobe suite won't fix it. Once it's gone, it's gone.
    We've not been able to establish any pattern to this either....the error has popped up on two computers about two weeks ago with no rhyme or reason. It popped up on a third yesterday immediately after we installed Avid Media Composer.
    All of these computers are running the most current Nvidia Drivers, Cuda driver, Premier 6.03 and Mountain Lion. They've worked for a month or so, but in the past 2 weeks, they've all started falling and are unable to recognize the Nvidia card as the renderer.
    Can anyone help? This is really frustrating!

    Hi plokmatic,
    Please refer to above suggestion and check if can help you.
    -->Recently, the users alerted me that they could no longer search for messages from 2013.
    Would you please let me confirm whether all users encounter the same issue?
    Just addition, a message tracking log is a detailed log of all message activity as messages are transferred to and from a computer that is running Microsoft Exchange Server 2010 and that has the Hub Transport server role, the Mailbox server role, or
    the Edge Transport server role installed. Please check the Message Tracking log files if find more details.
    Understanding Message Tracking
    How to find that missing email with Exchange Message Tracking
    Please note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Please also refer to following article and check if can help you.
    Item Recovery in Exchange 2010
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Missing Renderer

    I am receiving an odd message that has only recently started popping up upon launching projects.  After clicking Open, and before the project loads, I get a dialog box which is headed:
    'Missing Renderer'.  It is then followed by the message:  'This project was last used with Mercury Playback Engine GPU Aceleration, which is not available on this system.  Mercury Playback Engine Software Only will be used'.
    I have the Nvida GTX-470 GPU card installed and the message has only started to pop up of late.  I've made no changes that I am aware of.  I can tell by watching playback that the message is correct and the card is not being used. Oddly, some projects don't give that message while others do.
    What would cause CS5 to suddenly quit accessing the card?  Could it somehow be offline?  And if so, how would I confirm that?  And finally, I noticed in the list of CS5 5.0.2 some fixes for Nvidia cards.  Is this a possibility? 
    Thanks for your help.
    Tom

    Thanks, Harm.  That did the trick!  Very much appreciated.
    Tom

  • When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Missing part message in MIGO

    Hello,
    we have activated the missing part message in MIGO using transaction OMBC.
    All is working fine and we receive an notification in business workplace.
    The problem is that only one person receives the mail and we want that all MRP controllers get an notification.
    In transaction OMBC under "Mail user" we can only maintain one "Recipient Name".
    But what is the meaning of "Recipient for mail to MRP controller"? Can we here use position to maintain all controolers in the organization model of the PD (PD-ORG)?
    Thanks
    Arnfried

    Hi There
    Specification of the mail recipient- System sends the missing part message to the material planner(MRP Controller) responsible for the material,, in order for this to happen , a user ID must be assigned to the material planner,,
    Specification of missing part expediter- if no user ID is assigned to the responsible material planner, the message is sent to the central missing part expediter responsible for the plant. This person is defined per plant,,
    So this is what happening in your place,,  maintain the user ID to the MRP controller,, then it will work fine,,
    Maintain the below settings--
    SPRO-IMG-Materials Management-Consumption-Based Planning-Master Data-Define MRP Controllers-Double click on MRP controllers-Maintain the field Recipient Name (User ID) then system will trigger the mail to MRP controllers...
    Hope it helps
    Thanks
    Senthil

  • "Missing fonts" message when the fonts are *not* missing

    I get the "Missing fonts" message fairly often for fonts that are not really missing. Then I have to specify the fonts that I used to create a given document, which are installed on my Windows XP system and have never left.
    Has anyone else encountered this problem? Is there any way to stop it from recurring? It happens every so often, not every time I open a document but every once in a while. It involves a particular set of fonts (Geometric).
    Any suggestions? Thanks.
    Orson

    >I don't see any AdobeFnt*.lst files in my Fonts folder. But is that where to look?
    No. They're scattered through all of the Adobe application folders. Do a search for AdobeFnt*.lst (using the *) and it should find them all. They get rebuilt automatically as required after deletion. Don't delete any file ending in .db.
    Peter

  • Videos with avi format do not open under Lion and receive "missing codec" message.  Worked fine prior to Lion installation.

    Videos with avi format do not open under Lion and receive "missing codec" message.  Worked fine prior to Lion installation.

    http://perian.org
    You may also need to install QuickTime Player 7.6.6 to open the files.

  • Nokia 301 Feature Request: Missed calls/messages n...

    Hi,
    I just bought a Nokia 301 dual sim phone. I'm satisfied with it except one thing - IT DOESN"T HAVE MISSED CALLS/MESSAGES NOTIFICATION. How come such important and basic function not implemented? No one will check his phone regularly and there is no way to know wether I have missed calls or messages. It should keep making a beep until I read it. I believe this function could be implemented easily in software, even by polling the status at a constant interval or setting up a counter which issues interrupts. Any Nokia staff can answer this questtion?
    Thanks.
    Leonard

    This is a feature which the majority of phone users do not want, and that's why Nokia phones have not done it since the early 2000s when Nokia phones used to beep the morse code for SMS.
    There are two primary reasons why a person might not read a message at the time it comes in:
    He didn't hear it, maybe he was in a noisy place and didn't hear or maybe the phone is in a different room.
    He heard it but was prevented from reacting by other circumstances.
    If you are away from your phone, there are visual cues when you get back to it that a message has come in. If you are walking down a busy street with your phone in your pocket, there is also in the vast majority of phones a vibrate option to give an alternative kind of notification. If you are driving a car responsibly on a journey of some length, it would becoming annoying after a while if your phone was beeping in your briefcase in the back of the car, or if you leave your phone on your desk at the office whilst you are elsewhere, the repeated beeping could be just as annoying to other people.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • G/L Account is missing 1 / Message 131-46 / Out Going Excise - India

    Hi All,
    Please note I have created a Sales Delivery and copied it to Outgoing Excise Invoice.When I click on Add I receive following error message.
    G/L Account is missing 1 Message 131-46
    Now when I made the G/L account field visible, found that it was blank.
    To verify my G/L account mapping, I tried to create Goods Issue transaction with G/L Account field visible for the same Item and I found that it brings the G/L account over there.
    Awaiting for a quick response
    BR
    Samir Gandhi

    Hi,
    check this pdf / expert-session :
    https://service.sap-ag.de/~sapidb/011000358700000894772007E/FIN_CW39_ErrorGLAccMissing.wrf
    Also check for the PDF of the same at
    https://service.sap-ag.de/~sapidb/011000358700000894762007E/FIN_CW39_ErrorGLAccMissing.pdf
    Anywhere there is not set up a g/l account. (banking / stock / shipping / etc.) Check the documents and go through all kinds of set ups for g/l.
    Regards Steffen

  • G/L account is missing (1) -[message 131-46]

    Hello,
    I have created a new company and have all the master data uploaded. I have also set all the accounts on G/L determination. When i try to create a A/R Invoice from the SBO client application i get the error "G/L account is missing (1) -[message 131-46]". I am unable to understand which G/L is missing.
    If I try to upload same A/R Invoice through DIAPI i get a different error message "No item cost was found  [INV1.WhsCode][line: 1]"
    I am running SBO2005 SP01 PL29
    Thanks and Regards,
    Sheetal

    Sheetal,
    I am not sure 100% what the issue is, but if you get the error "G/L account is missing (1)", one thing you should check for is a missing account in the item definition, in the supplier definition or in the GL Account determination.
    The issue occurs because there were no accounts defined when trying to add a marketing document. The document is added as a draft document, accounts were then set up and then the draft document was finally attempted to be added but the draft was not connected to the stock account. It is recommended to first define accounts, to delete the original draft document and create a new marketing document draft.
    HTH,
    Eddy

  • Missing File Messages / iWeb adding -1 to files names

    I am trying to create a website using iWeb '09 but I am have an issue with missing file messages. I created the site without an issue. Opened it up the following day and immediately received missing file messages for almost all pages on the site. iWeb appends a -1 to valid file names ex: IMG_12345 -> iWeb message = missing file IMG_12345-1. I am also receiving the missing file messages with the template images which are not being used on the website (dragged and dropped my images over template images).
    I tried to delete the pages then recreate them but that didn't work either. I also deleted the com.apple.iWeb.plist file (emptied trash) then restarted, held shift while rebooting, changed template to a different template then changed it back...nothing is working.
    Does anyone have any other suggestions?

    Another thing I noticed; I have two "domain.sites2" files, one in Users >> Folder >> Application Support >> iWeb and the other is in a personal directory. They are both modified today two hours apart. I just opened and closed iWeb and the file in the application support directory shows a modification not the one in the personal directory.
    The first five or so times I opened iWeb I had to acknowledge the iWeb welcome screen before it wouldn't come back. It seems that my iWeb may be corrupted and have to be reinstalled?

  • Receipients missing in Message type ACPJMM ( message B1003)

    HI experts,
    I'm getting a strange error while i try to post a goods receipt or goods issue. the message says
    receipients missing in Message type ACPJMM ( message B1003)
    The Idoc is passed through a ALE layer and the message is assigned with three receipients, either enter the receipients or deactivate the message.
    And please remember that i am a SAP MM beginner and help me with the procedure for solving this problem....
    Antony

    Antony:
    Can you please let me know how you solved this problem?

  • 'Missing part' message ar GR reporting

    Hi All
    Rather than set up an output for the 'Mat xxxxxx is a missing part' message, how can I report on the data on a daily basis?
    We have tried setting up an output email that was sent to the respective MRP controller but this was not practable for us
    Thanks in advance
    Darren

    Follow the link and setup the workflow message
    http://www dot saptechnical dot com/Tutorials/Workflow/FrmMsg/WFMSG1.htm

Maybe you are looking for