Missing reports in Report and Layout manager

Hi Experts,
i need to convert with Crystal Converter some PLD Tax reports.
The problem is that under Tax Reports tree, in report and layout manager, reports of typecode 'RB01' are missing!
Why are they missing??
Is there any other way to convert them even if missing?
i can see them in the tax report form, selecting tax register block and press ok.
From the print layout designer they are listed.
Please help.
Thanks
Paolo

Hi Paolo,
What is your B1 PL? Have you solved your problem? Try to upgrade to the latest PL if you are not in it.
Thanks,
Gordon

Similar Messages

  • Delete Crystal Report Design in Report and Layout Manager

    Hi All
    How to permanently delete a customised Crystal Report Design imported in Report and Layout Manager?
    There is no Delete button at all unlike Form Design?
    Kedalene Chong

    Hi Nagarajan
    Please see image attached, already login as superuser but there is no Delete button for imported Crystal Report Design in Report and Layout Manager.

  • Rename or delete manually created menus from Report and Layout Manager

    Hi All,
    Does anyone know if it's possible to rename or delete a folder manually created during a report import in the Report and Layout manager?
    Kind regards,
    Matt

    Posted the question on the SAP core forum.

  • Report and Layout Import Wizard does not work

    We used the Report and Layout Import Wizard extensively in 8.80 with no problems encountered.
    We are now upgraded to 8.81 PL07.  This is the first attempt at using the wizard in 8.81.  The intro window of the wizard, with 'To Start, use the "Next" button' message is as far as I can get.  The "Next" and "Cancel" buttons are inoperative - when I click them, there is no response (but they are not greyed out).  The program has not crashed - I can move the window, and the "X" close button at top right works, but nothing else does.  I am logged in as a superuser, running B1 in an RDP session on the server, same as under 8.80.
    Any ideas out there?

    Hi,
    This is a 8.81 PL07 bug!
    I had the same problem this week, and i found the note [1615932 - Buttons "Cancel" and "Next" are inactive in Report and layout import wizard window], that says that it is corrected on PL08!
    Regards,
    Alice

  • Report and Layout Import Wizard issue

    Running SAP B1 v8.82 PL04. RDC into the client server.
    I'm getting an issue when importing a report.  I get all the way to clicking the "Finish" button and it never loads to the next screen (telling me if the import was successful or not).  When I go to the location I specified for the report, it appears there but with a different icon and when I click it shows me an error: "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]".
    Narrowed down the issue a little:
    - Happens for any report I try to import
    - Happens for both file types (.rpt / .b1p)
    - The wizard works in the other databases on the server
    - Same issue when I try on different computers with different log ins
    There didn't seem to be any major event that triggered the issue.  I was in the middle of importing a few reports, and imported a couple successfully, when all of the sudden the issue occurred.
    You can also refer to the video link I've attached below which is a complete walk-through of the issue.  Any help on this is greatly appreciated, this is really holding me up. Thanks in advance!
    -Andrew
    http://screencast.com/t/g88C39K78Zgs

    Verifique a SAP Note 1532509.
    Solution
    Please run the below query and if it returns results please Go to the PEQ page mentioned below or log a support message via SAP Service
    Marketplace, and attach the results of the query.
    select * from CDPM where ObjectType = 232 and ObjectKey not in (select doccode from rdoc) order by permid
    Select * from USR3 where PermId
    not in (Select distinct Absid from OUPT union Select distinct cast(PermId as nvarchar(50) )from CDPM)
    the solution to this note can be found at:
    http://wiki.sdn.sap.com/wiki/display/PEQ/Can%27t+import+CR+template+into+B1
    By using

  • Features I'm missing in PDFG ,Forms and Process management

    PDF Generator:
    I think that "Optimize scanned PDF" feature should be available in PDFG.
    Something similar to  "Shared review" functionality.
    PDF Generator+Forms
    DocConverter service should be able to flatten dynamic pdf forms  not only static.Currently even if you have a licence for LC Forms and LC PDFG you have to purchase an Output to flatten dynamic forms.
    Process Management
    Support of RTL langueges in Workspace. Integration of TextLayout in Workspace project will be great.
    LC Designer
    Support of RTL langueges in Form Guides
    Thanks, Yan.

    Hi Henke,
    the New feature of WAS 700 you can find http://help.sap.com/saphelp_nw2004s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/69f45201356248830f1e70fdd7178e/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/44b2420e71c511e10000000a1550b0/frameset.htm
    You can find more info in Architecture manual and amdinistration manual.
    regards
    Anand.M

  • Set Authorisation ---- Report Layout Manager

    Hi experts
                Recently i upgraded my SAP B1 2007 B to SAP 8.8 PL:12 and when i tried to set the authorization for using crystal report an .dmp file get created and error msg box get displayed and SAP client get closed.
                Administration -
    >Setup----->General -
    > Report and layout manager -
    >(Specified report is chosen)Set Authorization button is clicked the .dmp file get generated. Please give me a solution

    hi poongundran
    follow these steps
    first delete client set up from add/remove programms
    secondly delete sap business one folder form program files from c drive whre sap is installed
    now delete %temp%,prefetch,recent and recycle bin
    and restart ur system and now install sap client setup and now u will not get any dmp errors
    i think this will solve ur prob
    regards
    Jenny

  • Adding a Crystal Report (report or layout) in a specific menu location

    Hi,
    i want to import a CR Report through SDK.
    I found an example in the sdk help center. You can find it searching 'Adding a Crystal Report (report or layout)'.
    It works but going in the Report and layout manager i find it under 'Lost Reports'.
    i cannot find a way to specify the MENU LOCATION just like the Import Wizard allows.
    Can anyone help me?
    Thanks
    Paolo

    hi how you solve this??

  • Stock ageing report with batch Management active

    Hi Experts,
    My client wants a Stock ageing report and batch management is active
    According to my client, Inventory ageing report should show stock quantities and stock value as follows,
    1. Below one year
    2. Between one and two years
    3. Above two years
    What are the table and fields to be considered for this report.
    Thanks
    NDS

    What steps do you mean? taking an ABAP course and doing it yourself, or stepping to an ABAPer and let him know what he shall do?
    you asked for a stock report, not for a movement report.
    If I go into my warehouse and looking at all the stuff sitting there and want a report that should tell me how old this stuff is, then i am not intrested if there was a goods receipt movement.
    However I would like to know the last movement date. In this case you have to look into table S032 or into the movements MSEG (with MKPF as header table)

  • Install and config issues with Oracle Portal, Forms, Reports and Discoverer

    For a while now I've been struggling with migrating a testing database to a newer version.
    And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
    What I've got:
    Windows server 2008 R2 64bit
    Oracle 11g database
    Java 6u27 64bit
    JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
    JDK 1.7 64bit
    Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
    PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
    and a hanging up configuration
    Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
    Result - the config froze for approx.18 hours then failed
    There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
    I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

    Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
    So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
    It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
    the last thing the .out file shows:
    Creating a new AdminServer Object ...
    AdminServer port is 7002
    Starting the domain ...
    LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
    [2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
         ... 18 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 13 more
    progress in calculate progress4
    progress in calculate progress4
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 13 more
    Going to execute executeAfterConfig
    java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
    [2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
    I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
    the other link you mentionned seems to have no relevance yet
    does that clear up anything for you though?
    ..can the lack of SOA suite have anything to do with the problem?

  • Possible solution: Open Crystal Reports Print Layout from UDO form

    Hi all,
    I recently had to print information of a UDO which I have on a new form. I searched through the forum and found different solutions, but none that used the new "integrated" crystal reports viewer. So I came up with this workaround, which so far works great. I post it here for anybody else needing this kind of workaround, or in case somebody has a better solution, pick that up.
    Here it is:
    1) Create your Crystal Report file and import using the Reports and Layouts screen in SAP Business One. Give it a meaningful name and location in the menu. Have at least one parameter to take the DocNum or DocEntry, or whatever your primary key is. (Note: I know the import can be done by SDK, but as far as I can see there's no way to place it in the menu structure just yet.)
    2) In your Add-On in the event ID 520 (print), call the following function with the Document Number grabbed from the open form:
    public static bool printUDO(string strDocNum)
                // get menu UID of report
                Recordset oRS = (Recordset)B1Connections.diCompany.GetBusinessObject(BoObjectTypes.BoRecordset);
                oRS.DoQuery("SELECT MenuUID FROM OCMN WHERE Name = 'ReportName' AND Type = 'C'");
                if (oRS.RecordCount == 0)
                    B1Connections.theAppl.MessageBox("Report layout 'ReportName' not found.", 0, "OK", null, null);
                    return false;
                // execute menu and enter document number
                B1Connections.theAppl.ActivateMenuItem(oRS.Fields.Item(0).Value.ToString());
                Form form = B1Connections.theAppl.Forms.ActiveForm;
                ((EditText)form.Items.Item("1000003").Specific).String = strDocNum;
                form.Items.Item("1").Click(BoCellClickType.ct_Regular); // abrir reporte
                return true;
    I know it's kind of a dirty solution, but it works, and if you have any suggestions, I'd be happy to hear them.
    Thanks!
    Joerg.

    Hi Joerg,
    It's not a dirty solution... I like it and i'm using it
    Thanks!
    Best regards,
    Ana Silva

  • BPM Process and data management

    Greetings,
    I want to ask a question related with best practice topics. What is the best way to manage the information generated by process execution?. Its ok to have a database different from the workflow database to store the most important data.
    I know this could be somethig redundant, but its easier to manage the data this way because managing an accessing the "BLOBs" in the workflow repository is not easy. Its there any advice in relation to this topic, any link or document ?

    Hi Christian, thanks!
    What I'm missing also within Process and Task Management Facade is the link between ProcessInstance and related TaskInstances.
    I know I can get tasks for a user by Status or ID. But I see no way to get a set of tasks for a certain process Instance.
    Will Process and Task Management Facade also be enhanced for SAP NW CE 7.3 EHP1?
    Is it already known what new features will be available or is this information published during TechEd?

  • Report Builder Layout Model Missing

    when I went to edit an existing report in 10g, I found the display of the Layout model is missing.
    The fields and frames are all visible in the Object Navigator but they just don't show up in the layout screen.
    Is there an easy way to fix this - or do i have to rebuild the report from the queries?
    **** Doh **** Noticed the layout model was pointing to the Trailer pages - hence no details.
    Apologies
    Edited by: Elaine L on Feb 8, 2010 12:34 PM

    hi,
    first u check u r layout model ,
    totally three sections are there
    1) header section
    2) main section
    3) trailer section
    i think u r checking the layout in header or trailer section
    first u have to check in the main section
    if its not there u can with other two sections,
    in these three sections not available in u r layout , go to the object navigator in the main section --> select the some fileds and repeating frame
    and apply the color of black of red in selected fields and repeating frames,
    after that check u r layout model

  • Report & Layout Manager

    Hi,
    I have created User defined form. Now i have to display report when click on Preview button (Same as Standard document).
    Can we use report & layout manager to display report.
    Regards,
    Pravin

    Hello
    possible with development, and it is pending from the B1 version.
    Easy solutions are:
    - 8.81 you can use Crystal Reports and PLD
    - 2007 you can use PLD only or CR integration addon
    in Crystal:
    - You can create your layout and you can import into the system as report (not layout) into a specific folder
    - When you press the print or print preview button (eg menu action is indicated, menu id "520", "519"), then you can find the crystal report in the OCMN table with the following query
    select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME'
    - next step is call the report with ActivateMenuItem and fill the parameters.
    Complete code for crystal
                Dim oRs As SAPbobsCOM.Recordset = oCompany.GetBusinessObject(BoObjectTypes.BoRecordset)
                Dim sQuery As String
                Dim sMenuID As String
                sQuery = "select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME"
                oRs.DoQuery(sQuery)
                If oRs.Fields.Count > 0 Then
                    sMenuID = oRs.Fields.Item("MenuUID").Value.ToString
                    m_SBO_Application.ActivateMenuItem(sMenuID)
                    Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.ActiveForm
                    oForm.Items.Item("1000003").Specific.String = docentry
                    m_CrystalCriteriaFormID = oForm.UniqueID
                    oForm.Items.Item("1").Click(BoCellClickType.ct_Regular)
                Else : m_SBO_Application.MessageBox("NO PRINTING LAYOUT EXISTS!")
                End If
    In PLD, the logic is the same, but you must activate the User Queries print layout, and locate the report in the matrix.
    Regards
    János

  • Generating pdf report via concurrent manager and xml publisher

    I have report (rdf) which works fine in eBusiness Suite but I’d like to create translatable reports with reach layout (comparing with the Report Builder) based on the functionalities of the XML publisher. I’ve made all necessary steps (first change the output format for that report in concurrent manager from pdf to xml, submit the report to get xml file, which I’ve used in Microsoft Word Template Builder to make layout in rtf file, and create data and template in XML Publisher Administrator in eBusiness Suite).
    When I’ve submitted that report from concurrent manager, after the concurrent manage finished his job I got the warning message.
    Also the output file is not generated and in log file there is a message: One or more post-processing actions failed. Consult the OPP service log for details.
    Concurrent manager works fine, but there are problem when concurrent manager send the xml output of the report to XML Publisher which have to create pdf layout based on rtf template.
    I think there might be a problem with report complexity, while I’ve used layout formatting, api calls to eBusiness Suite, parameters, placeholders, attached library etc.
    If it is impossible to get new report based on xml publisher template, what is the purpose of xml publisher if it is so limited, while every eBusiness Suite Report is so complex.
    I hope there will be a person on this forum with the same problem, otherwise I’ll give up at all from XML Publisher, at least until it come a better version of that tool which it seems to be in early development phase and not ready for the market yet.

    All of the complex report logic is handled in your Oracle Report (rdf) file.
    If your Oracle report is working OK, then this report should be generating XML.
    After running your report, go to the View Requests window. Highlight your request, and click the Diagnostics button. Then click the 'View XML' button. If you see XML data, then you should be OK.
    When I faced a similar issue, it was because the '1 step' process didnt work for the particular report I was using. The '1 step' process doesn't work for every report. Which report are you using?
    If the report is submitted via a form (not the concurrent manager request form), then you probably need to use 2 steps to produce the desired output.
    For more information, see the following thread:
    Enhancment to avoid 2 step check printing
    HTH,
    Mark K

Maybe you are looking for