Missing results when using percentage function %GT

Hi all,
I'm using the percentage function in BEx. As you can see in the left two columns, it works fine when the results are higher then 0,4. All the results less than 0,4 are set to 0. In the last column I calculated the results with an Excel formula.
Any Idea, what the problem can be?
4.392,080          1,5635 %          1,563481163
997,440          0,0000 %          0,355066085
4.761,680          1,6951 %          1,695050405
1.260,000          0,4485 %          0,448531508
469,600          0,0000 %          0,167166981
280.916,720     100,0000 %
280.916,720     100,0000 %
Many thanks in advance!

Dear Daya sagar,
Iam tried with taht functionality the query it self it is showing wrong and iam getting below error as result.
Diagnosis
The query contains a formula with the operator %RT. Therefore, the query cannot be released for OLE DB for OLAP.
The operators %GT, %RT, %CT, SUMGT, SUMRT, SUMCT and LEAF depend on the display of the list in the BEx Analyzer. If you used OLE DB for OLAP or MDX, this formula would deliver unexpected values.
Procedure
Do not release the query for OLE DB for OLAP, or do not use the operators %GT, %RT, %CT, SUMGT, SUMRT, SUMCT or LEAF. You may be able to achieve the desired result by selecting constants.
and report output is not coming.
Thanks & Regards,
Sathish

Similar Messages

Incorrect Results When Using an In-Line View and User Function in 10g

My developers are complaining of incorrect Select statement results when using an in-line view along with a user defined function. Below is the statement:
select test_f(wo1)
from
(SELECT a.WORK_ORDER_NBR, b.work_order_nbr wo1/*, facility_f(A.FACILITY),
A.PLANNER, A.WO_STATUS, mil_date(A.WO_STATUS_DATE)*, A.WORK_ORDER_TYPE,
A.WO_DESCRIPTION
FROM TIDWOWRK A, TIDWOTSK B
WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR))
where wo1 is null;
Test_f() is a user defined function and the above query returns thousands of rows. It should return 308 rows. It is apparent that the target database is not evaluating the "where wo1 is null;" clause.
select to_char(wo1)
from
(SELECT a.WORK_ORDER_NBR, b.work_order_nbr wo1/*, facility_f(A.FACILITY),
A.PLANNER, A.WO_STATUS, mil_date(A.WO_STATUS_DATE)*, A.WORK_ORDER_TYPE,
A.WO_DESCRIPTION
FROM TIDWOWRK A, TIDWOTSK B
WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR))
where wo1 is null;
In the above query return 308 rows. The user function was replaced by an Oracle function. The Where clause is now evaluated correctly.
The query is executed from an Oracle 10g R2 database and retrieves data from a 9.2.0.6 database.
I've seen a little information on Metalink. It appears that there was some trouble in 9i, but were fixed in a 9.2.0.6 patch. I don't see any information about a 10.2.0.2 database.
Anyone have any experiences or a successful solution. I suspect that I will need to report this to Oracle and wait for a patch.
Thanks,
John

I can only think of two reasons for this behaviour:
1) You are executing these two queries from two different users and there is some policy on the table.
2) The function doesn't do an upper, but returns null a lot of times, even when the input is a not null value, like this:
SQL> create table tidwowrk
2 as
3 select 1 id, 'A' work_order_nbr, 'DST' facility from dual union all
4 select 2, null, 'TRN' from dual union all
5 select 3, 'C', 'DST' from dual
6 /
Tabel is aangemaakt.
SQL> create table tidwotsk
2 as
3 select 'A' work_order_nbr from dual union all
4 select 'B' from dual
5 /
Tabel is aangemaakt.
SQL> create or replace function test_f (a in varchar2) return varchar2
2 is
3 begin
4    return case a when 'A' then null else a end;
5 end;
6 /
Functie is aangemaakt.
SQL> select count(*)
2    from ( SELECT a.WORK_ORDER_NBR
3                , test_f(b.work_order_nbr) wo1
4             FROM TIDWOWRK A
5                , TIDWOTSK B
6            WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR
7              and a.facility in ('DST', 'TRN', 'SUB')
8         )
9   where wo1 is null
10 /
                              COUNT(*)
                                     3
1 rij is geselecteerd.
SQL> select count(*)
2    from ( SELECT a.WORK_ORDER_NBR
3                , to_char(b.work_order_nbr) wo1
4             FROM TIDWOWRK A, TIDWOTSK B
5            WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR
6              and a.facility in ('DST', 'TRN', 'SUB')
7         )
8   where wo1 is null
9 /
                              COUNT(*)
                                     2
1 rij is geselecteerd.Regards,
Rob.

How to use percentage functions in BEx with structures

Hi, I need a help.
I have a query with a structure in the rows: two characteristics at left then the structure.
Plant, Year/Month and a structure with 3 lines (Line A = movement type = 1, 2, 3, Line B types 4, 5, 6, Line C types 7, 8, 9).
In the rows just a quantity.
I'm trying to use percentage functions CT or GT in the rows, but it's not working.
The idea is something like:
Plant 01    07/2010   Line A    30 30%
                                 Line B    20 20%
                                 Line C    50 50%
                 Result                          33%
                 08/2010   Line A    40 20%
                                 Line B    60 30%
                                 Line C   100 50%
                 Result                          66%.
When I do not use the structure percentage function works well, but with the structure results are completely wrong.
Any help will be appreciated.
César Menezes

You either have to use exception aggregation to give you the total per plant and use that in your percentage calculation, or you could define a formula in the cells. Here you can reference the specific cells you want to use as inputs.

When using TODATE function MDX query is not correctly generated

Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
When using TODATE function MDX query is not correctly generated.
This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
Here is generated MDX code:
With
set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
select
{ [Accounts].[Trosak kapitala],
[Accounts].[MS1],
[Accounts].[MS2],
[Accounts].[MS3]
} on columns,
NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
from [NISE.NISE]
where ([Segmentacija].[SegmentacijaCustomGroup])
If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

Hi,
Version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
Thanks

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

10.9.4: Graphical errors when using OSX functions like Mission Control, Spotlight

Device: MBP 15" Retina 2.3 GHz Intel i7
OSX: 10.9.4
Monitor: 27" Thunderbolt Display
Issue: When using OSX functions like Mission Control (Expose) and spotlight, I frequently get graphical errors that remain on the desktop unless I reset the computer. I can resolve the issue by adding a new desktop and dragging my windows over.
This happens almost every day.

You have installed all these non-Apple system modifications:
Kernel Extensions: ?
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.promise.driver.stex (5.2.7 - SDK 10.9) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.pentablet (5.2.6) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
Litlle snitch has been a bad actor for some users.
You do not have any CUDA Hardware, so the CUDA Driver is not needed.
I do not know what siLabs driver thinks it may be driving.
You left the door open:
Gatekeeper: ?
Anywhere

DBMS_XMLQuery behavior when using stored function within cursor select

Consider the following SQL Statement
select t1.id
, t1.name
, cursor ( select t2.id
from tab t2
where t2.t1_id
= t1.id
and validate(t2.xyz,:bd1)
= 1
from tab t1
where t1.id = :bd2
DBMS_XMLQuery is used to create a context and to bind the appropriate values. In this case 'validate' is a stored function. I get the following error message upon execution:
ORA-29532: Java call terminated by uncaught Java exception:
java.sql.SQLException: Missing IN or OUT parameter at index:: 1
Issuing a similar statement in SQL*Plus works fine. I was wondering whether this is a known issue when using a stored function in the cursor select statement in the context of DBMS_XMLQuery or whether I'm doing something wrong.

Hi Jan,
This problem has been identified and fixed. The fix should be available in the next release. Thank you for bringing this up to our attention.
visar

ORA-00917: missing comma when using NVL

Hi All,
I have a INSERT statement which works fine and looks something like:
EXECUTE IMMEDIATE
'insert into MYTABLE(ID,TASK_ROLE, PROGRESS,SALES_PERSON) values ...
However if I change the above piece to use NVL function like this:
EXECUTE IMMEDIATE
'insert into MYTABLE(ID,TASK_ROLE, NVL(PROGRESS,''0''),SALES_PERSON) values ...
I am getting the following error:
ORA-00917: missing comma
Where should I enter the extra comman needed?
Regards,
Pawel.

Hi these are in fact two simple quotes '. If I use only one simple quote I get an error:
1 error has occurred
ORA-06550: line 48, column 239: PLS-00103: Encountered the symbol "0" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem return returning <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk member SUBMULTISET_ The symbol "* was inserted before "0" to continue.
Same thing happens if I ommit the quotes at all and leave it like NVL(PROGRESS,0)
Edited by: padmocho on Sep 20, 2010 11:37 AM

Error in results when using cfqueryparam

I get an error in the result set when using cfqueryparam in a
SQL "IN" statement.
This is on RHE with CFMX 6.01 and an Oracle 10g DB
In this instance, the query should have returned 8
records...as confirmed using SQL Navigator
This works fine regardless of the number of prameters inthe
list contained in variables.mrkt_sctr:
and rms.mrkt_sctr_id in (#variables.mrkt_sctr#)
If I do this:
and rms.mrkt_sctr_id in (<cfqueryparam
cfsqltype="cf_sql_varchar" list="yes" separator=","
value="#variables.mrkt_sctr#">)
I only get 7 results(debug info says seven and there are only
7 records listed)...the results that would have been generated by
the second parameter in the list of market sectors is ignored int
he results. If a 3rd market sector is added, I see the results of
the 1st 2 market sector id's...but the 3rd is ignored. If I put the
query (as output by the CF debug info) into SQL Navigator and
replace the ?'s withthe actual values...I get the appropriate
number of results. IF you look at the results on the webpage, the
results that would have been generated by the 3rd parameter are
missing.
There is nothing else in the code that would limit the number
of rows rerturned by the query.
Any Ideas?
Thanks
Eric Roberts
Owner/ColdFusion Developer
Three Ravens Consutling
http://www.threeravensconsulting.com

Do you know how to use the 'result' parameter of the query
tag to get
the actual, complete SQL statement sent to the database.
Looking at
this may tell you what your issue is.

OpenCV SEGFAULT when using imshow functions

Hello,
recently, when I run my OpenCV application on archlinux, I get a segfault when using OpenCV's imshow() functions for displaying the video output. This still worked some weeks ago and I did not change my code since then.
The error is related to GTK+ which causes the segfault after OpenCV uses the gtk_init() function.
This is the stacktrace:
#0 0x00000000006328a0 in signal ()
#1 0x00007ffff1dff264 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#2 0x00007ffff1524427 in g_option_context_parse ()
from /usr/lib/libglib-2.0.so.0
#3 0x00007ffff1dff80e in gtk_parse_args ()
from /usr/lib/libgtk-x11-2.0.so.0
#4 0x00007ffff1dff869 in gtk_init_check ()
from /usr/lib/libgtk-x11-2.0.so.0
#5 0x00007ffff1dff899 in gtk_init () from /usr/lib/libgtk-x11-2.0.so.0
#6 0x00007ffff6a1fa38 in cvInitSystem ()
from /usr/lib/libopencv_highgui.so.2.4
#7 0x00007ffff6a20163 in cvNamedWindow ()
from /usr/lib/libopencv_highgui.so.2.4
#8 0x00007ffff6a20cfd in cvShowImage ()
from /usr/lib/libopencv_highgui.so.2.4
#9 0x00007ffff6a1c7f7 in cv::imshow(std::string const&, cv::_InputArray const&) () from /usr/lib/libopencv_highgui.so.2.4
#10 0x00000000004187e0 in StereoMatrix::displayImages (this=0x7fffffffd6ff)
at /home/user/mtdev/src/StereoMatrix.cpp:51
#11 0x000000000041861a in StereoMatrix::generateStereoMat (
this=0x7fffffffd6ff, input=..., resizeMat=false)
I'm running the recent version of OpenCV from the repositories:
extra/opencv 2.4.6.1-3
Apart from that my system is also up-to-date.
Can anyone reproduce this error or has an idea what causes it?
Thanks

Hi Thanks for the response
Still beavering away at this but have made sizeable progress since this post.
First off I ma looking for solutions within CVI and not LabView but I often find that if there is a solution in Labview then there is often one in CVI so my question becomes.....does Labview allow for capture of a 10 bit image? That is my biggest stumbling block.
My solution so far involves writing a C wrapper dll for the existing C++ SDK that is supplied with these cards in Visual studio then using it within CVI.
This works but has been allot of work and as disappointed as I would be to find that there is a simpler solution I would be happy to simplify the code involved in my overall project - and also to put details of the best solution on the forums for others that may be trying to do the same thing!
Another disadvantage to the curretn method is it is a little slow - I am constantly looking at way of speeding up aquisition of the images. I have no solid numbers but I'd estimate I am working in the region fo around 10 frames a second when working with 10 bit images.
For 8 bit images the best solution I have found is to make use of the IPP library that is provided by Intel. This hasgreat functions for taking the raw data from the card and presenting it in various ways at high speed. I have written 1 application with this that pulls the informaiton in real time but only at 8 bit as unfortunately there is no 10 bit option.

ESB problem when use merge function in master/detail relationship

I have some problem with the merge function in database adapter.
details:
I have 2 tables in master/detail relationship, both have GUID column as a primary key (GUID generated by ESB).
'car_group' table
pk : guid
unique : group_no, datadate, datatime
===============================
guid, group_no, datadate, datatime, group_detail
===============================
1, 1, 01/01/2008, 09:00, groupdetail01
2, 1, 01/01/2008, 10:00, groupdetail02
'car_group_detail' table
pk : guid
fk : car_group_guid link to car_group.guid
==================
guid, car_group_guid, detail
==================
1, 1, detail01
2, 1, detail02
3, 2, detail03
4, 2, detail04
I used a file adapter as a input, here is an example text file
M, 1, 01/01/2008, 09:00, groupdetail01
D, detail01
D, detail02
M, 1, 01/01/2008, 10:00, groupdetail02
D, detail03
D, detail04
Because I used merge function so I need to specify the columns that will be a condition for the insert/update,
but I have generate GUID as a primary key in the tables, I can't used it, so in toplink I map my unique key as a primary key.
The insert operation work fine but when update is required (for example, try to change 'group_detail' column of the master table in text file),
an SQLException thrown, the log file shown the adapter try to update the GUID column of master table but the constraint not allowed.
And yes, cause of GUID generate everytime so ESB try to update this column also, but I don't want to do like that, I need something
like when update operation required, just ignored the GUID column.
I try to mark read-only to the GUID column in Toplink mapping file but still have the same problem, it still generate UPDATE statement
with the GUID column, and also I try to let the database trigger to generate GUID instead of ESB function, but it not works in master/detail
relationship (I think the Toplink manage the relationship, is it right ?)
Please advise, thanks for advance.

somebody please help, thanks !!!

PROBLEM when use topN function - Essbase connection

Guys,
please help me. I'm trying to rank a number of clients using TopN function by revenue but when i order my Top 10 the Analysis log out. And always when i log in again continue logging out...
U guys can help?
Tnks,
Lucas

Please go to http://zone.ni.com/reference/en-XX/help/371361B-01/lvtextmath/msfunc_classes/ and see if "saveas" is an available function in LabVIEW MathScript.
As a matter of fact,I do not see the need to complete the file I/O inside the MathScript node,Why do you want to do that?

Weird results when using prompt

I have created a report in answers. When using a normal filter condition I get one set of results. When using a prompt with the same criteria and no filter I get no results! I played around with removing/adding certain columns (all from the same subject area and same underlying physical table ie no joins involved) and answers sometimes returns results and sometimes not, depending which columns I have added into the query! We are running OBI SE1 on windows 10.1.3.2.1 (Build 070411.1900) - has anyone come across a similar problem? I fear it may be a bug in the OBI software but couldn't find anything on metalink.

Hi Hurtn
Can you paste the Query Log?
Sunil S Ranka
Blog :: http://sranka.wordpress.com
"Superior BI is the antidote to Business Failure"

When composing new email (gmail) tool bar showing fonts, colors, bold, italics, underline, etc. is missing? When using Internet Explorer the bar is there.

When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.

Thanks Tony T1, I have tried using the Mail -> Format drop downs...
... and using the format toolbar...
... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there...

How do I turn off the requirement to press control when using a function key

When using my wireless keyboard, it requires me to press controls to use the function keys (F3, F5, F70.) However, this makes it so some of my games controls won' work,(For example, in Minecraft I can't access the debug menu.) Is there any way to disable this.Thank you for your support

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Missing results when using percentage function %GT

Similar Messages

Maybe you are looking for