Missing Retention node in Material management in SAP SPRO
Hi All,
In my SAP ERP 6.0 EHP4 system, Retention node in Material management in SPRO is missing.
I did checked on IDES EHP4 system and its present over there.
Can i know, from where to get this missing node? Do i need to activate any BC Sets?
FYI...We upgraded ECC system with Central Components only while upgrading to EHP4.
Hi Pankaj,
Thx for reply, i activated as you said, but this is still not solved and i cant see Retention Node..
FYI...In IDES system i can see under Materials management -->Logistics Invoice Verification --> Incoming invoice.
After this activation do i need to do any more steps from Basis team?
Similar Messages
-
Material Management on SAP MINWAS 610
Hi Folks
I had installed the test demo version of SAP MINIWAS 610 on my system.
My question is can I access the MM or anyother modules like FI CO in this WAS 610 version ?
if not above can I actually access any basic module of R3 system or is WAS 610 mainly aimed at BSP and ABAP langauages only ?
would appreciate if anyone can share their knowledge and experiences on the same
Thanks
PatThe MiniWAS 610 (although you should go to 620 now!!) is just the Basis system no modules.
The 620 is a bit more flexible but still no modules, have a look here for some things done with the MiniWAS 620:
/people/craig.cmehil3/blog
620 System: /people/sap.user72/blog/2004/12/08/mini-me-of-was-620-the-saga-continues -
Differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Dear Friends,
Please mail to me the differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material Material management module.
With regardsHi Vasmi
There is lot of Diffenence Between ECC 6.0 & 4.6 C
1-in 4.6 C Country India Version(CIN) is add on Separatelly
while after 4.7 E up to ECC 6.0 CIN is integrated Part of SAP. that is the measure difference as per my knowledge
2-ECC 6.0 have more functionality in terms of transaction for example
if you do MIGO for PO then you can capture and post the excise invoice in the same transaction while in case of 4.6 C that feature is not available
these two are major as far as MM is concern
there are many others feature also
Thanks -
Restarting J2EE server nodes from Developer Studio Vs SAP Management Consol
Hi,
What makes the difference between restarting server nodes from Dev Studio and SAP Management console.
Please let me know if any documents related to this.
ThanksThanks for your quick reply.
I observed that options for restarting services from Dev Studio are disabled.
Could you please let me know where we need to configure to enable these options when right click on server instances.
Thanks -
SAP Material Management Certification
Hi All,
I will take the Material Management Certification, does anybody have question for my reference.
Regards,
LukeDear,
Top of the all answers, self study, well understanding and indepth process steps of MM is important for certification.
Secondly, if you want to get few hints about sample questions and answers, you can search on net and you will find lot.
The best ever website which you can gain MM questions is :
http://www.daypo.net/test-sap-mm.html
This is the best.. do the test again and again until you get the correct answers. Correct not in the sense puzzling with answers again and again, understand the fundamentals of question and answers.
Regards,
Syed Hussain. -
Upgrade from Training and Events managment to SAP LSO
Hi,
We've upgraded from Training and Events management to SAP LSO 604 and during that process we have run the execute booking relationship harmonization node in IMG.
We still have references to Business event groups and Business event type in themaster data catalog instead of Course groups and Course types. Are we missing something?
Thanks,
Swathi.Hi Swathi,
You have not missed anything, they resemble the same both in TEM & LSO so dont worry.
Go Ahead >>>>>>>>>>>>>>
Regards
Rafi -
How to add Missing IMG Item in Solution manager
Dear Gurus
Kindly guide me how to add Missing IMG Item in Solution manager. If this Item's tcode doesnt exits. how i can add in my Blue print & Configration portion
Edited by: MAZ on Nov 17, 2009 11:52 AMHi
What is the error you are getting when you are adding the tcode.
Have you checked the role of the system.....if not then
in solar01 goto sap menu
Business blueprint->sytem role...choose the appropriate system role
In addition have you generate the Project IMG in the satellites system using solar_project_admin tcode under system landscape tab
check this guide
https://websmp210.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
Let me know further if this doesnt solve ur prb
Regards
Prakhar -
How to find out if a Product is HU or non HU managed in SAP EWM ?
Hi All,
Sorry for a naive question. But i tried to google this thing but couldn't find much material on SAP EWM.
How do i know if a Product is HU managed or non HU managed in SAP EWM ?you can control per storage type whether an HU is allowed or not.
so you do not assign the HU but a setting if HUs are allowed or not.
You can create a new HU in various processes e.g. picking or packing. It's not possible to list all possibilities here.
What process are you trying to execute? -
Material transfer from SAP R/3 to SAP Business One is blocked
Hello experts,
Please I need your help for the following scenario:
Our client has B1iSN and SAP R/3 in the headquarter company and B1if and SAP B1 in the subsidiary. The material transfer from SAP R/3 to SAP Business One failed and the following message is diplayed:
Result message :
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-2028) No matching records found (ODBC -2028)
The Material database transfer is blocked due to message in status
failure which block all other messages.
We tried to restart the server (Business One and B1iSN) but it didnu2019t solve the issue.
Any idea please? Thank you.Hi Nadia,
did you check the WRITE-POLICY settings of your scenario?
when reading the displayed DI Error message, it looks like B1iSN is trying to update an B1 item which does not exists.
Please open SAP B1iSN Tools -> Development Tools -> Graphical scenario Design and select your Bizpackage, BizStep and BIUMETA.
Open the WRITE-POLICY symbol and check the entries:
Insert on Exist = error or fallback2U
Update on Miss = fallback2I
The Update Policy should stay to value regular.
To activate changes of the WRITE-POLICY please deactivate, modify and reactivate your Business Process instance.
If a WRITE-POLICY change has no effect, please check your data mapping (BIU) and especially the parameter <QueryParams>, which mustn't be filled for "insert/Add" operations into B1.
Best regards
Bastian -
Document for configuration of the spend management in SAP E-Sourcing
Hi All
Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
Error: The spend analysis environment is not ready to provide spend data
Request feedback
Regards
TridipHi Kamalakar
This is great piece of information, I checked the same place i found the following
Module Name
Auctions License
BOM License
Contracts License
Demand Aggregation License
Frictionless SRM Product License
Optimization License
Projects License
RFQuick License
RFx License
SRM Explorer License
XPress Print License
Do you think am missing the spend license, whats that called, request you to let me know
Regards
Tridip
Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM -
The "J2EE process table" node not visible in the SAP MMC
For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
SriniIt's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.
-
WHATS THE FLOW OF A PURCHASE ORDER WITH REGARS TO MATERIAL MANAGEMENT ?
WHATS THE FLOW OF A PURCHASE ORDER WITH REGARDS TO MATERIAL MANAGEMENT ?
Hi
see the MM flow with related Transaction codes
MM Cycle:
Purchase Requisition-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Reward points if useful
regards
Anji -
WHATS THE FLOW OF MATERIAL MANAGMENT IF YOU MAKE A PURACHASE ORDER ?
WHATS THE FLOW OF MATERIAL MANAGMENT IF YOU MAKE A PURACHASE ORDER ? PLEASE EXPLAIN IN DETAIL.
BEST REGARDS,
RYANHi Ryan,
The t procurement cycle for a material consists of the following stages:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control.
(This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records,
use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.)
You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements.
This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions,
you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts
(in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals.
It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
Hope this is useful for u..
Reward points if useful..
Cheers!!!
Pankaj.. -
Physical Inventory Process in Material Management
Hello All,
I have blogged on the physical inventory process in Inventory management. This will be more helpful for the new guys in the area of SAP / Material management.
<a href="/people/community.user/blog/2007/05/04/physical-inventory-in-material-management Inventory Process in Material Management</a>
You are welcomed to put the comment or feedback
Regards
Arif MansuriHi Arif,
I added a comment on 'distribution of usage variances' to the blog, to make people aware on that useful, but not yet very well-known feature in newer releases.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/d2/cb532d455611d189710000e8322d00/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/d2/cb532d455611d189710000e8322d00/frameset.htm</a>
best regards,
Udo -
hi all
will any body give detail description of material management process in ppt format
regards
brijeshhi,
check this out
MM flow
MM flow
MM flow
PR >Release the PR>RFQ>Quotation>Quotation Comparison>PO>Release the PO>GR>Invoice Verification
MM Process flow:
Process Flow
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Tcodes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
Maybe you are looking for
-
Audigy 4 Pro Windows Vista RCA jack Input 3 not work
Audigy 4 Pro Anyway to get Input 3 (RCA jacks)?working. Before I go back to XP. Don't mind the other problems with Vista I just need my RCA jacks, Thanks
-
I had this on Tiger forum. And maby Safari forum is were I need to get help. This is the diccussion so far. G4 Power book 1.67 10.4.4, did the same on tower to. I been working with Netsape html. I want to save in Netscape format. I guess that the def
-
Error in converting the c/c++ file to java in JNI
hi all i am new to jni in java programming. i[b] had success fully compiled the java class i.e. Sample1.java--->Sample1.class--->Sample1.h but when to Sample1.c-->Sample1.dll as shown below in the console i get this error C:\jdk1.4\bin>cl -Ic:\jdk\in
-
Green Screen (Built in Isight)
Whenever I open a application with isight the screen is just green.
-
Returns to vendor agter MIGO and MIRO
hI, I have made on PO, did MIGO and MIRO for the same (CIN) Now i want to send back the material to vendor in two scenarios 1) After MIGO 2) After MIGO and MIRO 3) After payment has been done. Regards, Satyendra