Missing Rules extension dll

Recently ran into an issue where an MA is failing with the the following error: stopped-extension-dll-file-not-found
The event logs show its looking for an extension dll that IS in the directory:  C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\Extensions\
Even though the dll is located within this directory, it does not show up when trying to select a dll via the MA properties.
any thoughts?
Opper....

Framework version should have nothing to do with this. FIM Sync supports even 4.5 if installed on the box.
Could it be an extension DLL instead that is missing?
Regards, Soren Granfeldt
blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

Similar Messages

  • FIM 2010 Sync not running with status "Stopped-extension-dll-exception"

    we are getting the following error for all our extensions when trying to run the Sync Operations. All extensions have similar errors with event ID 6159 generated in the application event log. They all started occurring after I deleted a attribute flow
    rule in one of the agents. This is happening in Production and are facing lot of other issues because of this.
    The management agent "Peoplesoft" failed on run profile "Full Import Full Synch" because of a problem with the initialize method on the extension object. The extension dll is "PeoplesoftExtension.dll" and the stack trace is:
    Microsoft.MetadirectoryServices.UnexpectedDataException: String or binary data would be truncated.
    The statement has been terminated.
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.RunSQLCommand(String commandstring)
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.AddSentEmailsRecord(String sAMAccountName, String MessageSubject, String MessageBody, Int16 DelayDays)
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.CheckDoNotDisableInactiveGroup()
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.LoadConfigSettings()
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.InitializeCommon()
       at Mms_ManagementAgent_PeoplesoftExtension.MAExtensionObject.Initialize()
    Please advise on how to fix this as I have no clue where to start and am new to FIM.
    Only Full Import(Staging ONLY) is successful.

    The error message you are getting is talking about data getting truncated. Any change that you had a data change alongside your other changes and now the length of data in one or more of your attributes is longer than it was?
    I suspect that since you are new to FIM, something else has changed that you don't realize (beyond just the deletion of the one sync rule), but...
    If truly the only thing that changed was a deletion of a flow rule, is there any chance that either of the following could have happened:
    With the deletion of a flow rule the corresponding data is no longer going through the sync engine. Could there be some logic that due to precedence, is now using a different value, and this different value is too long for some other piece of logic.
    With the deletion of a flow rule the corresponding data is no longer going through the sync engine. With this value missing, some extension logic is making a different choice and generating invalid data. Without the deleted data flow, there may be a null
    value that extension logic is not properly dealing with.
    As was suggested, the best thing to do may be to restore from backup and get the system back to a known state.
    If you have development skills and if you have the source code to your custom rules extensions, it is fairly easy to debug and single step through the code. This of course must be done with extreme caution if you are in a production environment. You will
    also need familiarity with how the FIM Synchronization engine works. Documentation is here:
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms698774

  • Missing Files: AnnaNotifier.dll and EASNotify.dll

    I am missing the following dll files and wanted to find out how to get them loaded onto my pc to get rid of the annoying pop-ups.
    AnnaNotifier.dll
    EASNotify.dll
    Any help will greatly be appreciated
    Post relates to: Treo 650 (Sprint)

    If you have attempted to install from the CD or had a previous version of palm desktop on your computer before upgrading to the 6.2 and are experiencing the missing dll errors. It is due to it not fully uninstalling the palm software off of your computer and going through a couple of added steps to ensure the program is installed correctly.
    1. Launch Control Panel
    2. Go to User Account and family settings
    3. Select the User Account
    4. Go to the main user account page
    5. Select make changes to the user account
    6. Unselect the use User Account Control
    7. Reboot your computer
    First thing  that should be done is uninstalling the palm software, If you had user account control turned on during the previous install leave it turned on. If you had it off during the initial install leave it off we will be needing that later.
     You will need to set your computer to show hidden files to ensure all the files are shown that are the correct ones to be deleted. First we are going to remove the program, clean up the registry, and remove offending folders.
    1. Uninstall palm desktop in add/remove programs. Which in Vista is now Programs and features
    2. Locate the palm folder that is saved on your computer. It's usually in <C:/program files/palm>. Delete that folder
    3. Clean up registry by deleting the following keys. To get to the registry. Type regedit in the search
    Normal registry keys
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\SOFTWARE\PalmSource or anything else that says palm
    Additional key in Vista
    *HKEY_USERS\[user sid]_CLASSES\Virtualstore\machine\software\palmsource
    Close registry
    Additional folders also need to be deleted from the computer
    c:\users\[user name]\appdata\local\virtualstore\program files\palm0ne
    c:\windows\hotsync....(This will vary from hotsync manager to hotsync conduits. Rule of thumb if it says hotsync something delete it)
    Reboot your computer again
    Now if you did not turn off user account control earlier you are going to want to do it now, by following the previous steps. After you turn it off you are going to have to reboot again.
    Now when you are back up and running. Attempt to reinstall palm desktop 6.2 from here http://www.palm.com/us/support/downloads/windesk62.html
    Also please make sure you are an administrator before installing and before your first initial sync. Also make sure you are the only person logged into the pc. Palm desktop does not support fast user switching. Rule of thumb before installing disable any antivirus programs or firewalls that could block the program from being downloaded correctly.
    Post relates to: Centro (Sprint)
    Post relates to: Centro (Sprint)

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Error while running User Profile Import - Stopped-extension-dll-load

    Hi guys,
    I'm receiving below error message in event viewer while running user profile import for the first time with event ID 6166:
    The management agent "MOSS-" failed on run profile "MOSS_EXPORT_". The run step stopped because a configured extension for this management agent could not be loaded.
    User Action
    Verify that the extension is located in the Extensions directory. If the extension is present, confirm that the version of the .NET framework  that can run the extension is installed on the server and that a supportedRuntimes  entry in the configuration
    files specifies that version. The synchronization  engine will not be able to load an extension that is built with a newer version  of the .NET framework than the version of the .NET runtime it is hosting.
    At the same time , in miisclient "stopped-extension-dll-load" message for MOSS_EXPORT,MOSS_FULLSYNC, MOSS_DELTASYNC. Can any help to let me understand what will be causing this issue?
     Farm version: 14.0.6137.5000

    Hi Sarath,
    For this issue, I recommend verify the things below:
    Check if the connection name of the Synchronization Connections created in User Profile Service Application has more than 55 characters. If yes, please rename the connection with less than or equal to 55 characters.
    Check if the length of the full path to the dll called “Microsoft.Office.Server.UserProfiles.ManagementAgent” is
     greater than 160. If yes, then we can move the extension Microsoft.Office.Server.UserProfiles.ManagementAgent.dll to the folder c:\windows\assembly\GAC_MSIL and then do an IISRESET.
    If above cannot work, please check ULS log for more detailed error message.
    Best regards,
    Victoria Xia
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • ITunes wont run after update today says missing file msvcr80.dll

    iTunes wont run after update today says missing file msvcr80.dll
    tried to reinstall, nothing changed.

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

    Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98972)

  • After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • MOVED: Windows cannot boot because of missing/corrupt hal.dll! Help!

    This topic has been moved to Operating Systems.
    Windows cannot boot because of missing/corrupt hal.dll! Help!

    Hi,
    make sure you have disconnected all non-essential external devices (printers, scanners, external harddisk) prior to installing BootCamp Windows.
    Leave only mouse, keyboard and display connected.
    Make sure that your XP CD is either retail or OEM/systemBuilder version and not a manufacturer-bundled one.
    Also make sure that the CD is 'clean' (no dust, no scratches, etc.).
    Use the BootCamp Assistant to revert back to one single OSX volume.
    Use OSX Disk Utility to Verify your harddisk and repair permissions.
    Retry the XP installation from scratch.
    Generally using NTFS is more likely to not getting the 'missing hal.dll' error.
    Stefan

  • Why do I have a missing file msvcr80.dll all of a sudden?

    I just used iTunes the other day and when I tried to open it today there is an error (7) and windows error 126 and a missing file msvcr80.dll.
    What is going on?

    The continued connection to the Events allows you to continue editing the project, or to use the Event in another project. As long as you are not editing, you do not have to have the external drive connected (but you will have the yellow triangles).
    If you delete the events to reclaim space, I think you are basically left with your finished movie and further editing is not possible. (Although you could import your finished movie as an Event and do edits on that.)
    Once the Project is done and shared, and you are absolutely, positively sure that you will never have to edit it further (or you are willing to re-import from your source and start over) then you can delete the event files and recover the space.
    That's what I think. I am sure others will jump in to correct anything I got wrong.
    I would also say that you might get a better experience by playing your finished movies in iTunes rather than through iMovie. Then there will be no possibility of further editing, but you can view your movie through Quicktime.
    Message was edited by: AppleMan1958

  • HT201210 update has missing file, msvcr80.dll

    Itunes was working fine till Apple requested to update to the latest version.  After it updated to 11.1.4 it now complains about missing file MSVCR80.dll and will not start up.  Is there an older version still avaiable somewhere that I can back up to.

    I read that there are a lot of us having the problem and the cure is the deinstallation and reinstall of the files listed in latter discussion.  It works and I am back with Itunes.  Thanks for the good info.

  • Because of missing component (MSVCR80.dll). What to do?

    Have had itunes on computer for several months.  Tried to install latest version. Installer indicated was successful.  Attempted to open and received error message that itunes would not open because of missing component (MSVCR80.dll).  What do I need to do and how? 

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99699)

  • Missing file icuuc42.dll

    Photoshopt cc starts with error. missing file icuuc42.dll. Can't see any way to repair missing file using Creative Cloud?
    This appeared just after the last update.
    Thanks,
    Bill

    Reset the preferences first.   Start PS and immediately hold down alt/ctrl/shift (option/cmd/shift mac).  If fast enough you will get a reset window.

  • How to save tdm file from GPI extension DLL

    Hi,
    Is there any way to save data channels to tdm file format from GPI extension dll.
    I've tried lDataSave function, but I get DAT file format.
    I've also tried using Diadem.TOCommand interface, It'works with CmdExecuteASync method, but not with CmdExecuteSync (I've thought using a new thread with CmdExecuteASync, but what about synchronization ?).
    As I need to run a process like, do something, save tdm file, then do another thing, I'm a little lost.
    Thanks for any suggestion.
    JMA.

    Hello!
    First: I have no solution!
    Second: Some remarks to using a OLE interface to DIAdem in GPI.
    My experience is that there are only few situations and circumstances where it might be the only way to solve a problem. There are some critical things to know. If you create a ToCommand interface it isn't guaranteed that you get an interface to the proccess you are running in. In normal cases it will be but you can't be sure! CmdExecuteSync doesn't work because usually your command is initiated out of a script. While running a script DIAdem will not execute another command.
    The problem with CmdExecuteASync is that the command will be put onto the DIAdem command stack. It will be executed after the script is finished. You can not be sure that the channel data is the same as it was at the time you called CmdExecuteASync. Multiple Calls to CmdExecuteASync will be executed after another.
    Sorry that I do not have a solution but perhaps I can avoid some frustrating DIAdem-OLE-Test-Sessions.
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

  • Cannot download itunes, error message says I am missing media accessibility.dll  Can you help me?

    I cannot download itunes on my PC.  Error message says i am missing Media Accessibility.dll  Can anyone help?

    Hi, you may have resolved this issue already, but if not...
    There should be one copy of MediaAccessibility.dll in the folder:
    C:\Program Files\Common Files\Apple\Apple Application Support (32-bit systems) or
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support (64-bit systems)
    If you can locate the file, right-click on it and select Properties, then on theDetails tab it should have File Version - 48.1.0.11. If it has a different version number then it is out of date and is likely to be cause of the problem.
    Please search your Programs Files and/or Programs Files (x86) folders for all copies of the file MediaAccessibility.dll - Any other copies of the file in different locations are likely to be out of date, but might be called in error by an executable file in the same folder, thereby causing the error.
    Should you find more than one copy of MediaAccessibility.dll could you please let me know in which other locations it was found. This will let us more effectively help others with the same issue by suggesting where they should look. If you have the correct version, in the correct place, then deleting any others should fix your problem. This is similar to the QTMovieWin.dll issue dealt with in the first box of the user tip Troubleshooting issues with iTunes for Windows updates.
    If you don't have the correct version of the file then completely removing all components, deleting the named folders, and reinstalling as suggested in the second box of the user tip should work. You could try repairing Apple Application Support alone from the the Programs and Features or Add/Remove Programs control panel first as that would be quicker, but only if it works.
    tt2

Maybe you are looking for