Missing "sapparar" with SAP 7.1

Hi all,
with NetWeaver/SAP 7.0 we use sapparar to get infos from the profiles. With SAP 7.1 there is no sapparar available. How do I get my profile parameters now, e.g. whcih ERS belongs to (A)SCS. Should I read profiles by myself ?
Kind regards
Karlheinz

Did you used WSPUBLISH transaction for publishing?
You just configured service NOT published it. You can still configure it using SOAMANAGER just create service and endpoint (give any name) and it is done then you can use binding url for testing.
If this doesn't help then my advice to re-read everything related to Webservice Configuration (do not read about publishing). You are confusing two different thing, YOU CAN'T PUBLISH SERVICE WITHOUT SR.
Please read this and follow exact steps: http://help.sap.com/saphelp_nw70/helpdata/en/47/3971ff39591a53e10000000a1553f7/content.htm
If you are creating using wizard in SE80/SE37 then skip publishing part of service.
Regards,
Gourav

Similar Messages

JSPM Error with SAP-JEE component SP16

Hi
I am depolying a queue in JSPM SP16.1 for an ECC6 700 SR3 installed ABAP/Java system and it errors with the component SAP-JEE SP16 (installed level is SP14 as delivered in the SR3 kit)
The log has the messages:
Oct 8, 2008 1:49:57 PM Warning: Caught CVersProxyAccessException while saving repository: CVersAccessException: Cannot access CVers due to missing or incorrect configuration.
Additional error message is:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Creation of DataSource for database "WFQ" failed. (com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..)
regards
Michael

Hi Philipp
My version is 700 and the database is DB2/400 for IBM System i.
The sapcrypto is treated differently on this platform, so I havent done anything with it as yet.
I logged a message with SAP which has gone to the BC-JAS-SEC queue and the reply I received is below. Please let me know if this has helped you as I have not had the chance to get back to the system to try these steps :
regards
Michael.
To do the further investigation, may I check info below with you:
- are you able to read the content of the
/sapbwtest/global/security/lib/tools/iaik_jce.jar file with jar
- do you have the full strength JCE files installed for this JDK?
See note: 739043
- What user is used to connect to the Database from the java side in
the secure store? check if the password is correct or the user
is unlocked.
Make sure the connection details in Secure Store are the correct ones
you can check it in the config tool:
the jdbc/pool/<SID>/Password and jdbc/pool/<SID>/User
Edited by: Michael Power on Oct 15, 2008 8:52 PM

Issue in Communication of SAP R/3 6.4C with SAP J2EE Engine 6.40.

Hello,
We have an application deployed in SAP J2EE engine 6.20. From SAP R3 (SAP R/3 version is 6.4C), We are communicating to the application deployed in SAP J2EE Engine 6.20 using RFC protocol. EJB module (Deployed in SAP J2EE Engine 6.20) which is being invoked from a Function Module using RFC protocol has the same name as the Function Module name. We were able to communicate to SAP J2EE Engine 6.20 this way.
Currently, I have deployed the same application in SAP J2EE Engine 6.40. I have followed the same procedure which i have used while depolying and working with SAP J2EE Engine 6.20. But, it is not working, and i was not able to communicate to SAP J2EE 6.40, the same way i did in SAP J2EE Engine 6.20.
Please let me know whether the procedure for communicating to SAP J2EE Engine 6.40 has changed in comparison with SAP J2EE Engine 6.20.
Also,Any pointers regarding RFC and JCO implementation in SAP J2EE Engine 6.40 willl be helpful.
Thank you.
Regards,
-Shabir Rahim.

Hi,
compare to 4.7
1.New ABAP editor added like if u write code in abap editor ,using if coditions and select statments it automatically shows the link endif, like if .. endif,select ...endselect.
2.New abap debugger compare to the classic debugger.
3.DBACOCKPIT
Missing indexes of various database tablesu2019 and the transaction to reactivate all the missing indexes is u2018DBACOCKPITu2019. Below is the screenshot of the transaction DBACOCKPIT.
Regards,
Madhu

Integrating FIM with SAP using web services connector

Hi
I am implementing the FIM web services connector to integrate with SAP. The MS connector config guide for SAP documentation seems to me missing some content or at least I think it might be written for an earlier version of
SAP than the version we are working with(different screenshots, options, etc). The version of SAP we have implemented is EHP6 for SAP ERP6 which I believe translates to ECC6.
SAP web services have been configured and FIM performs successful discovery of the wsdl endpoint and BAPI operations as expected. Our issue is that FIM fails to run a full import. From the digging around web service config and error logs two observations comes
out:
1. FIM Full Import workflow does not render correctly through the web service configuration tool and complains of a duplicate attribute "xml:space is a duplicate attribute on line on line 424 on position 103". Review of the wsconfig generated by the
webservice config tool points to an variable supplied to a construct the query to a BAPI of HR infotype 0006. Extract below:
...<InArgument x:TypeArguments="d:BAPIP0006L" xml:space="preserve">[If(Not IsNothing(addressInfo) AndAlso Not IsNothing(addressInfo.item), addressInfo.item, Enumerable.Empty(Of BAPIP0006L)()).
OrderByDescending(Function(a) DateTime.ParseExact(a.VALIDBEGIN, dataSourceDateFormatValue, Nothing)).
ThenByDescending(Function(a) Integer.Parse(a.RECORDNR)).FirstOrDefault()]</InArgument>...
I can only guess that it means the query should keep the spaces within the string it passes to SAP but this is where my understanding stops.
2. SAP returns errors about not implementing a BAPI EMPLOYEE_GETDATA function which is not part of the exposed BAPI operations. Well the obvious solution to this would be expose this missing operation (which is undocumented in MS config guide) however this
BAPI is a core requirement to retrieve person information. I would be hugely surprised if this operation was not factored into the config. This makes me think that to understand this better I need to resolve issue 1 first and get the rendering sorted first.
Has anyone come across the above issues with a recent implementation with this connector? Or help point me in the right direction?
any help would be greatly appreciated!
thanks!!

Hi Joe,
you most probably missed the sentence "Add the required BAPI’s in the function group and select those required BAPI’s and click continue." in the "Connector for SAP.docx" document on page 8. In other words your webservice does not provide the required
BAPIs.
In the "DefaultSAPECC_6.wsconfig" the workflows for import and export require specific BAPIs.
Also make sure that your Service Definition has got the same name as in the documentation and the workflow template.
I was fighting with this for the last 4 days but in the end got it working.
Hope this helps
Chris

FICO module missing in installed SAP Netweaver 7.02 ABAP trial version?

Halo Guys
After visiting the SAP site I decided to download the trial version to learn How to use the FICO. It took me 3 days for complete installation and now it seems I m missing FICO module and Dont know How to get this.
This Message is contained in the installation folder
"This package consists of two archives. Please download both to your local harddisk and unpack together. It contains all you need to learn ABAP based development with SAP NetWeaver. The following components are included:
SAP NetWeaver Application Server ABAP with MaxDB database
MaxDB Clients: MaxDB Database Manager (recommended to install) and SQL Studio or new MaxDb Studio
Compact SAP GUI for Windows"
Is there any other installation files needed to be installed or I need any other version so i can learn FICO kindly help to solve this?
regards
Cherian

Hi Viet-Toan Nguyen ,
First thing you can do is uninstalled the previously installed sapdb and choose to install db inside sap installation instead of using existing db instance in one of the installation step, So don't install db seperately , choose it during sap installation.
If you have tried first thing properly and the error still persist then.....
Second thing is :
Compatibilities for Oracle JDBC Drivers :
Starting with 10g Release 1 (10.1), the Oracle JDBC drivers no longer support JDK 1.1.x or earlier versions.
And also check the paths:
ORACLE_HOME/jdbc
ORACLE_HOME /jlib directory.
CLASSPATH
ORACLE_HOME/jdbc/lib/ojdbc14.jar for full globalization support ORACLE_HOME/jdbc/lib/orai18n.jar
ORACLE_HOME/jdbc/lib/classes12.jar
ORACLE_HOME/jdbc/lib/orai18n.jar for full globalization support
But I believe above all these things you should perform uninstallation and installation of SAP system properly on CURRENT DATABASE NOT ON THE PREVIOUSLY INSTALLED DATABASE.
Thank you.

Problem with SAP log-in using VBA with Excel Bexanalyzer add-in

I am trying to login in to SAP using VBA code but the code fails as indicated below .
In Function GetBEx(Optional iWb As Workbook) As Object
GetBEx = pAddin.ExcelInterface.WorkbookBExExcelApplication(lName)
Works properly – I get an object
However, in the sapBEXgetConnection function it seems that the lBex.ComConnection fails. The p_connectionObj doesn’t get assigned (p_connectionObj is Nothing)
Function sapBEXgetConnection(Optional IWhat As Integer) As Variant
    If IWhat = 0 Then
' try to get BexApi Connection
        Dim lBEx As Object
        Set lBEx = GetBEx
        On Error Resume Next
        Set p_connectionObj = lBEx.ComConnection 'fails here
        If Err.Number <> 0 Then Set p_connectionObj = Nothing
        On Error GoTo 0
        If p_connectionObj Is Nothing Then If Not prepareConnection Then Exit Function
        Set sapBEXgetConnection = p_connectionObj
    End If
End Function
All of this code is part of the Bexanalyzer Excel Add-In
I’m assuming that I’m missing a patch or some configuration is incorrect but, since I’m not very familiar with SAP I don’t know. Any help would be greatly appreciated. Thank you.

Hello Sebastien,
Since I don't know what an SSO automatic connection is I can't give you an answer. Can you explain it?
Here's what I'm trying to achieve: on demand I'd like to execute VBA code that will use Bexanalyzer.xla functions to log in and then refresh a query that exists in the Excel workbook. Ultimately I'll want to apply parameters / variables to the query when it is refreshed. I may then automatically execute VBA code to manipulate the resulting data in the workbook. Basically I want to be able to do all of this without any user input.
Paul

TM - ERP Integration with SAP PI 7.4

Hello All,
I am integrating TM and ERP with SAP PI 7.4 dual stack. I have downloaded the SAP TM XI Content version SAPTM 1.10. I have created the Configuration Scenario in Integration Builder and I have generated Sender / Receiver Agreement, Receiver & Interface Determination. But when activating the Receiver Determination I am getting error that some particular Service Interface is missing.
Kindly guide me and give your suggestion.
Regards
Amar..

Hello all,
Please give me suggestions or some valid inputs. Now I have downloaded the latest SAP TM Content SAP TM 1.20 version. But still getting the same error like Some Service Interface Objects are missing.
Regards
Amar..

(101) RFC_ERROR_PROGRAM: 'password' missing at com.sap.mw.jco.Middlewar

All,
I am trying to set up a simple demo about Payer direct with our 46C system. I have the R3 system defined in the system landscape. In user management, I have assigned UIDPW as logon method. I have maintained the User mapping where it is successfully saved but then when I go for the actual execution of the payer direct package, I get following error:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:413) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:823) at com.sap.mw.jco.JCO$Client.connect(JCO.java:2922) at com.sapportals.portal.prt.service.jco.JCOClientService.getJCOClientPoolEntry(JCOClientService.java:1290) at com.sapportals.portal.prt.service.jco.JCOClientService.getJCOClientPoolEntry(JCOClientService.java:1059) at com.sap.pct.fin.suss.PortalJcoService.getClientFromPortalJCOService(PortalJcoService.java:71) at com.sap.pct.fin.suss.PortalJcoService.getFunctionFromPortalJCOService(PortalJcoService.java:85) at com.sap.pct.fin.suss.R3UserAccountService.getUserAccounts(R3UserAccountService.java:37) at com.sap.pct.fin.suss.PortalBusinessPartnerService.loadBusObjects(PortalBusinessPartnerService.java:150) at com.sap.pct.fin.suss.FrontController.createBillerDirectUser(FrontController.java:244) at com.sap.pct.fin.suss.FrontController.createNewModelManager(FrontController.java:207) at com.sap.pct.fin.suss.FrontController.prepare(FrontController.java:168) at com.sap.pct.fin.suss.FrontController.doContent(FrontController.java:94) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390) at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729) at java.lang.Thread.run(Thread.java:534) .
Exception id: 05:45_29/07/05_0026_3897050
See the details for the exception ID in the log file
Any help will be greatly appreciated.
Regards,
Abhijeet

Hi Abhijeet,
Can you tell us on what version of EP you are working?
Did u try out other R/3 transaction codes using the same system. you can test in Sys Admin--> support --> SAP Application --> SAP Transaction for EP6 SP2 .Check to see whether you can access and have no error. For EP6 SP9, you can test connection after you create the system.
there are few sAP notes with reference to EP5.0 on RFC_ERROR_PROGRAM - SAP note - 458082, 543870, 516636.
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points for useful/solved answers

Missing integration with Learning Solution in Predefined Performance Apprai

Hi
We have recently transported Predefined Performance Management to our
production system. The integration scenario with SAP Learning solution
and SAP Compensation were checked while configuring Predefined
Performance Appraisal Templates.
The integration with Learning Solution is reflected in our DEV server;
when adding an action in the Competency and Development goal in an
employee document a "Mandatory Assignment" option pops up which brings
the course catalog defined in the Training and Event Module.
The same was transported to the QAS; but the "Mandatory Assignment"
option is not popped up while adding an action in the Competency and
Development goal.
Please advice on the corrective action on the missing option "Mandatory
Assignment" when adding action in Competency and Development Goals.
Regards
Imran

Hi,
we also offer an option for those customers that run only SAP BUsinessObjects without any SAP applications - it is called remote support component. see here : http://service.sap.com/rsc
The support for Solution Manager started with SAP BusinessObjects XI 3.1 SP3 but all the items listed below is part of the 4.0 release
ingo

How to create Webi Reports with SAP BW Objects

Hi,
I have no knowledge on creating webi reports with SAP BW Objects like (InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject).
As per my understanding Webi reports can be developed with universe which is created on BEx Queries or OLAP BAPI interface, unfortunately i don't have BEx App installed. So, i have to create OLAP universe in this case.
Here my question is can we create universe with all the available BW objects like InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject.
Please, Can anyone suggest a solution
Thanks,
Siva
Edited by: siva@chinni on Apr 25, 2010 4:45 PM

Hi,
Yes we can create WebI on the top of SAP Objects - InfoCube, DSO, Characteristics etc...
But we have to keep in mind that for WebI we must create Universe.
When we create universe we make direct connection with SAP Objects but we get less functionality - such Calculated Key Figures, Restricted Key Figures, formulas etc. Now you have to achieve all these missing components at Universe Level and at WebI level.
If you are creating your universe on the top of DSO and InfoObject then make sure they set for reporting.
There are some online documentation which tells that what functionality you can achieve.
Check the following document to have a bird's eye view.
[http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/100369a7-033e-2c10-94a4-f254f8578153?quicklink=index&overridelayout=true]
There is another document in PPT which I could not find online. It is very helpful document. It is:
II. SAP BusinessObjects BI Solutions XI 3.1 and SAP NetWeaver BW 7 Current risks, approach, and mitigating strategies for Client Partners, License Sales, and Consulting Delivery Managers
Partner Enablement Seminar
Regards,
Bashir Awan

Epson LX-300+II with sap

Dear gurus,
                     I had setup epson LX-300+II with sap with following parameter
                                  Device Type :EPESCP9 :EPSON ESC/ P 9PIN PRINTER
                                  host spool Access method : G:Front End Print with Control Tech
                                  Host Printer:_Default
                   there is a page format which is assign to EPSCEP9.
Print successful. but it will no print Table and box on the page...Please solve my Issue.....
Thanks in Advance,
Regards,
Snehal Patel

My guess would be that the device type definition is missing the print controls that you need.
I don't know that particular printer type but try to look into the device type-dependent print controls defined in txn. SPAD and see if it contains the controls to draw a box etc. If not, then you will probably have to copy and enhance the print control set.
Hopefully you do have the detailed manual for the printer...

Information how Ariba works with SAP

Hi All,
I searched in WEB but could not find enough information how Ariba helps to work with SAP.
Can you please help me to understand how Ariba works in procurement, sales and financial accounting with SAP.
Regards,
Prakash

Dear
The followings are from SDK online help. FYI
SAP Business One SDK enables partners and customer to extend and change the functionality of SAP Business One to create industry specific functionality, develop missing functionality, and interfaces with 3rd party tools.
The SAP Business One SDK consists of:
SAP Business One Data Interface API (DI API)
A collection of COM objects called business objects. These objects describe various methods for updating, retrieving, and manipulating data in the SAP Business One database.
SAP Business One User Interface API (UI API)
A collection of DCOM objects that provide access to forms, controls within these forms, and menus. DCOM (distributed component object model) is a standard interface for object communication in distributed applications.
DI Server
A COM service running on a server that enables multiple clients to access and manipulate SAP Business One company database, using SOAP version 1.1 messages.
DI Java Connector
An interface to DI API objects from Java. With Java Connector, you can conveniently get or set properties and invoke methods of the DI API objects with Java-bean-style code.
best regards,
xiaodan an

How to book missing goods in SAP

Some goods in one inbound shipment are missing due to the transportation, therefore I only booked the received goods via VL32N by doing Post goods receipts and keep mising goods are still open in PO. Now the transporation confirm these items are lost and can not find them back.
Would you please advise how to book these missing goods in SAP against the credit note for the compensation from our vendor.
Thanks for your help in advance.
Best Regards,

Hello,
yes, I have an idea. Is there a column tree control displayed
on this screen? In this case using an ITS PL24 might help,
I remember an error with this null icon solved with ITS 620 PL24.
best regards
Tobias

FMEA / xRCM with SAP PM

HI,
I have few questions about using Failure Mode & Impact Analysis & Reliability based maintenance with SAP. They are as below:
1. SAP provides the FMEA functionality but in QM module - Whether it can be used for SAP PM objects?
2. I could find the SAP note '1954644 - Meridium Reliability-Based Asset Management for SAP® Solutions - EBS partnership details' but no further dtails on the solution / integration points. Can any one forward me the link to this solution?
Many thanks

Hi,
You are missing/check for completion of some of the steps which are need to see demands from PS in MRS Planning board.
Create Org unit using transactions PPOME and PPOCE.
In PPOCE, create postions of the node, create user/person to that position and assign resource under that position.
In short your Org unit node will have a hierarchy as O_S_P (Organization_Position_Person).
Then to PP01 and maintain relationship between Org unit and Postion.
Then using SA38 and program run the availability transfer report /MRSS/HCM_RPTWFMIF for the resources.
Then go to transaction /MRSS/PLBOSRV
Thanks,
Sudhakar

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

Missing "sapparar" with SAP 7.1

Similar Messages

Maybe you are looking for