Missing "Save Site as Template" For Publishing Sites in Project online 2013

First I created Sub site using Project Template under the site collection.
Now I want to this Sub site Save as a Site Template. When I went for Save site as Template in site setting. Under Site Action there is no option for “Save site as Template”
marylu

"Publishing Feature" may be enabled at your site , The Publishing feature does not support the Save Site as Template option.
http://support.microsoft.com/kb/2492356
Some workaround -
http://www.learningsharepoint.com/2013/05/03/missing-save-site-as-template-for-publishing-sites-in-sharepoint-2013/
http://blogs.msdn.com/b/how24/archive/2013/06/13/save-publishing-site-as-a-template.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Similar Messages

Create template for a task in Project Server 2013

Hi everyone,
I've got a little question, yes, again :-)
Some user of Project Server haven't scheduled tasks, so they need to create their tasks by the "My Tasks" page, "Add a row" then "Add a new task".
Unfortunatly, these users create a lot of little tasks but which are the same excepted for an information (like number of the bug ticket) and my bosses want to create a template of a task for create this kind of tasks very quickly but I do not find a way to
do that.
Is it possible with Project Server to do something like this ?
Thanks to you,
Patmol

Patmol6 --
There is no default functionality in Project Server 2013 that would allow a team member to create a new task from some kind of custom template. It MIGHT be possible through custom software development, however. Hope this helps.
Dale A. Howard [MVP]

I don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

i don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

''how do i save my zoom setting for all sites? not for each site I visit''
That would be be impossible unless you did away entirely with page formatting entirely. Each author may have their own idea of what you should be seeing and how you are to see it. By site which is the default is about the best that you can do.
If you have a serious problem you could change the resolution of your display, but it had better be a very large monitor.
'''NoSquint''', adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site. Toolbar buttons, percent displays on status bar.
* https://addons.mozilla.org/firefox/addon/2592
'''Zoom text of web pages'''
* http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Creating Master page for publishing site

Hi,
I am trying to create a master page for publishing site. I have downloaded the "StarterBranding - V1.3" from codeplex, and used the "Starter Publishing". Currently it is not showing logo, search box, top navigation, breadcrumbs.
I have an existing master page which has lot of tags, and I am not sure what they represent. The below code is after the script manager tag in the body section:
<SharePoint:AjaxDelta id="DeltaDelegateControls" runat="server">
<SharePoint:DelegateControl ID="DelegateControl2" runat="server" ControlId="GlobalNavigation" />
<SharePoint:DelegateControl ID="DelegateControl3" ControlId="GlobalSiteLink3" Scope="Farm" runat="server" Visible="false" />
</SharePoint:AjaxDelta>
<div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return false;">
<SharePoint:EncodedLiteral ID="EncodedLiteral1" runat="server" text="<%$Resources:wss,master_turnonaccessibility%>" EncodeMethod="HtmlEncode"/></a>
</div>
<div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return false;">
<SharePoint:EncodedLiteral ID="EncodedLiteral2" runat="server" text="<%$Resources:wss,master_turnoffaccessibility%>" EncodeMethod="HtmlEncode"/></a>
</div>
<div class="s4-notdlg s4-skipribbonshortcut noindex">
<a id="A1" href="javascript:;" onclick="document.getElementById('startNavigation').focus();" class="ms-accessible ms-acc-button" accesskey="<%$Resources:wss,skipribbon_accesskey%>" runat="server">
<SharePoint:EncodedLiteral ID="EncodedLiteral3" runat="server" text="<%$Resources:wss,skipRibbonCommandsLink%>" EncodeMethod="HtmlEncode"/></a>
</div>
<div class="s4-notdlg noindex">
<a id="A2" href="javascript:;" onclick="document.getElementById('mainContent').focus();" class="ms-accessible ms-acc-button" runat="server">
<SharePoint:EncodedLiteral ID="EncodedLiteral4" runat="server" text="<%$Resources:wss,mainContentLink%>" EncodeMethod="HtmlEncode"/></a>
</div>
<div id="TurnOffAnimation" style="display:none;" class="s4-notdlg noindex">
<a id="linkTurnOffAnimation" href="#" class="ms-accessible ms-acc-button" onclick="ToggleAnimationStatus();return false;">
<SharePoint:EncodedLiteral ID="EncodedLiteral5" runat="server" text="<%$Resources:wss,master_disableanimation%>" EncodeMethod="HtmlEncode"/></a>
</div>
<div id="TurnOnAnimation" style="display:none;" class="s4-notdlg noindex">
<a id="linkTurnOnAnimation" href="#" class="ms-accessible ms-acc-button" onclick="ToggleAnimationStatus();return false;">
<SharePoint:EncodedLiteral ID="EncodedLiteral6" runat="server" text="<%$Resources:wss,master_enableanimation%>" EncodeMethod="HtmlEncode"/></a>
</div>
<a id="HiddenAnchor" href="javascript:;" style="display:none;"></a>
<div id="suiteBar" class="ms-dialogHidden noindex">
<div id="suiteBarLeft">
<div class="ms-table ms-fullWidth">
<div class="ms-tableRow">
<div class="ms-tableCell ms-verticalAlignMiddle">
<SharePoint:DelegateControl id="ID_SuiteBarBrandingDelegate" ControlId="SuiteBarBrandingDelegate" runat="server"/>
</div>
<SharePoint:AjaxDelta runat="server" id="DeltaSuiteLinks" BlockElement="true" CssClass="ms-core-deltaSuiteLinks">
<div id="suiteLinksBox">
<SharePoint:DelegateControl id="ID_SuiteLinksDelegate" ControlId="SuiteLinksDelegate" runat="server" />
</div>
</SharePoint:AjaxDelta>
</div>
</div>
</div>
<div id="suiteBarRight">
<SharePoint:AjaxDelta runat="server" id="DeltaSuiteBarRight" CssClass="ms-core-deltaSuiteBarRight" BlockElement="true">
<div id="welcomeMenuBox">
<wssuc:Welcome id="IdWelcome" runat="server" EnableViewState="false" />
</div>
Are the above tags required in Master page? what is the use of it? I have more tags and will add after knowing the use of it in future threads.
Thanks

Hi,
According to your description, my understanding is that you want to know about the each tags useful in master page.
In SharePoint 2013 master page, there are some common tags like body tag, head tag and meta tag and some style CSS div tags. For the useful of these tags, I suggest you can refer the articles below:
Understanding HTML master pages in SharePoint 2013
In your custom master page, it will have some custom css tags depend on the display style but it is no required for master pages, if you want to know about what tags is required in master page, you can compare the custom master page with the OOTB master
page.
More information:
Create a minimal master page in SharePoint 2013
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Re Creation of Site Assets Library after Publishing site Title update

For some reason we don't need Site Assets library in publishing site so we have decided to delete that. But after Publishing site Title update Site Assets Library is getting re created . What would be the possible reason for that . Whether Publishing
feature is getting reactivated whenever title is getting updated.
Ashish Baranwal || To know what you know and what you do not know, that is true knowledge

Hi Ashish,
SharePoint Designer has the setting "Hide from Browser' to hide the List/Library from browser.
It only restrict the user to view the List/Library links from browser,but if user directly use the URL to reach that List/Library and the user can edit or add new items.
Better set the ready only permission to users and set the "Hide from Browser" to the Site Assets library through SharePoint Designer.
Follow the steps to hide the Site Assets Library through Designer:
In Site Object Section, Select Lists and Libraries
Select Site Assets Library on right side, it's navigate to List Settings
In List settings-> General Settings, Uncheck option “Display this list on quick launch”. [This is necessary], Check the “Hide from browser”.
Save the list.
Now the links are hidden from SharePoint Site in browser.
Follow the steps to Unhide the Site Assets Library through Designer:
Open SharePoint designer 2010.
Click the “All Files” folder at the bottom in left pane.
Right click your hidden list from “All Files -> Lists” folder and choose property.
Now you have your hidden list open in SharePoint Designer.
In List settings-> General Settings: Uncheck the “Hide from browser” and save.
Now the links are visible in SharePoint Site.
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

How to generate site wise report for multiple sites running on single MDEX

Hi all,
I have single instance of MDEX 6.2 and Exprience Manager.
I have created some pages in workbench and set the specific trigger for all pages.
These pages are called from 2 different sites I have differentiated these 2 site by user profile. All is working fine for me.
But, Now I want to show the reports, right now the reports are displaying with combination of both sites result.
Is there anyway which I can display reports with site wise.
Thanks in advance,
Sunil N.

Hi Sunil,
You need to customize the reporting. You can log site specific parameter [for example site=abc/xyz] and then update the reporting to read and display reports site-wise.
Thanks
MS

I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B

In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred.m file already open with write permission.

In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission.
How do I resolve this?

Hi
Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
Yours Bengt W

I am trying to render a movie in ilife 11. Error appears: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (project is too large). It is only 1:39:00. Any ideas? Thanks! Marv

this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!

By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.

When I go to download my iMovie to iTunes I get the following message "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred"(disk full). What do I need to do?

When I go to share my Imovie to Itunes after a couple of hours I get the following message. "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred(disk full)". What does this mean and how do I fix it?

This is the forum for iOS (iPhones and iPads),
I have refered it to get moved to the correct forum.
But my guess is that you have to clear space on your harddrive.
The video gets rendered when you out put it, so you will need lots of space to do so.

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Best Practice tips for publishing Captivate 8 project?

Does anyone have any Best Practice Tips for publishing Captivate 8 projects? Is HTML5/Flash the most universal?
We will begin testing/training before our LMS is functional.
We have no shared network capability or SharePoint type platform. Project is too large for e-mail even when zipped.
I am thinking that we will have to use thumb drive/CD along those lines.

Hi There ,
Please refer to the below links :-
Adobe Captivate Help | Preview and publish Responsive projects
Adobe Captivate Help | Publish projects as HTML5 files
Adobe Captivate * Publishing Projects
Regards ,
Ajit

Update content type template for existing sites in sharepoint 2010 ?

Hi,
I created one custom document library (list definition) and associated 3 content types which has docment template path (\_layouts.template1.docx). I rollout nearly 200 sites with this definition. now i want to update my document template and also i want
to change template docx to dotx.
what is the best approach to apply these changes for existing sites ?
Thanks,
Surya.
suryakumarp

Hi suryakumar,
As I understand, you want to update the template
for existed content type.
It can be achieved by programming. There is a
SPContentType.DocumentTemplateUrl Property, which can be used to update content type.
Here is a demo:
http://officepoint.blogspot.com/2008/06/sharepoint-relink-infopath-forms-relink.html

Calendar view on page for Published site.

I have a subsite, and I create a calendar for meetings, on a new page I added a web part to show the calendar (calendar view). when I logged on the site, each event has their one link to details, (disform.aspx?id= something) but as soon I publish the
page, and go and use the browser as anonymous (not logged), I can see the calendar but I don't have links to see the details of the event.
I know this work because on the same site I have another subsite with another calendar and it is working just fine, i tried and I know I did it in another site, I just don't have links in this one.
the collapse or add links show up and work fine, it is just the link to the events detail. Someone can help me?

I did a test in my environment with anonymous access in the publish site and the event is in the calendar.
For a better troubleshooting, I suggest you do as followings:
1. Check the anonymous access in the site settings-> site permission->Anonymous Access->Entire Web Access.
2. Check if you have deactived the feature “limited-access user permission lock down mode” feature in site collection feature.
3. If the issue still exists, I suggest you recreate a calendar to test whether it works.
Best Regards,
Zhengyu Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Save a email template to client site

I'm sure this has been covered, but I must be asking the wrong questions as I can not find a tutorial regarding how to do it.
I just want to save a email template I have made to my clients site?
Can anyone point me in the right direct please.
Thanks

this is done in your partner portal under tools > newsletters templates

Missing "Save Site as Template" For Publishing Sites in Project online 2013

Similar Messages

Maybe you are looking for