Missing scratch disk cant reopen final cut express

I was cleaning my hard drives and moved a few large capture scratch files. I know the files still exist and my computer will not let me reset the scratch disk for some reason. and now i cant even get into final cut at all. what should i do!

i have the same problem .... it just happened to me yesterday as well ... please someone give us some information about what to do with this problem. I am afraid that we are going to have to reinstall Final Cut Express but the problem for me is that I am out of town and I don't have the disk with me but I need to do some work while I am here....

Similar Messages

Disk space error - final cut express 4

I'm new to final cut express. I color corrected a 60 minute video clip and attempted to export the sequence to Quicktime. It got about 80% complete and stopped due to out of disk space error. I have about 16 GB of remaining internal hard drive space on my macbook pro. I just received the software last night, so I do not yet understand scratch disk setup, etc. Is there a preference I should change or should I export to an external hard drive? I'm attempting to
import the final clip into imovie and idvd.

In addition to Al's response, with only 16GB left on your internal hard drive you are effectively out of disk space. You need to move stuff off that drive and/or delete what you no longer need. If you are doing video it is wise to keep at least 50% free space especially if the drive capacity is 500GB or less.
If you are doing HD video, here are some numbers to consider:
1 hour source media (video clips) = ~45GB
1 hour of render files of your 1 hour movie = ~45GB
1 hour exported QT movie = ~45GB
1 hour iDVD project of your completed QT movie = 2 to 4 GB
So your 1 hour project could easily consume 140GB of disk space.

Final cut pro cant read final cut express project

I produced a project on FCE on a powerbook G4. I transferred the files to a G5 to use final cut pro. When I start FCP it reads that the files are too new for it to open. I am running 5.0.4. Any thoughts?

I am not familiar with FCE, but if it supports export to xml, then you should use that option.

Restoring Final Cut Express Project from Time Machine

Hey, would like to restore a FCE project to macbook. i know you can restore individual files or folders- but i have tried to restore the main file, rendered folder and so on but i must not be selecting all files i need as there are missing clips in the project when i open it.
1) is there an easy way to restore all files required?
2) if not , what are the specific folders i need to restore so all the pathways to the capture clips still work?
any help would be fantastic, thanks for your help!
cheers.

Hello,
The only things you should restore are your *FCE project file* and any/all *source media files* (video clips, audio files, stills) that you used in the project. Don't even bother trying to recover render files, cache files or thumbnail files - they will be unusable.
The default location for your FCE files & folders is in +yourusername/Documents/Final Cut Express Documents+ folder. Note: in the event you changed your FCE scratch disk location, the Final Cut Express Documents folder will be located wherever you specified the scratch disk location to be. You may need to look through your TM backup to find these folders.
Usually your *FCE project file* is in your +Final Cut Express Documents+ folder, which also contains a folder called +Capture Scratch+ - that is where your video clips should be. Audio, stills - they will be wherever you saved them.
Note: in the event you saved your FCE project file, video clips, etc. in other locations than the default locations, you will have to search for them, as there is no way we could tell you where they might be - you could have saved them anywhere.
Also note: when you restore a project like this, it is normal to get an Offline Clips error message when you first open the project; follow the dialogs to Reconnect Media.
If FCE cannot locate certain media files when you Reconnect Media, try this: in the FCE Browser, control-click the name of the offline clip; then select Item Properties. In the window that opens, see if there is an entry in the Source row; that is probably the location where the clip was; you can use that location as a guide to hopefully find the clip in your Time Machine backup.

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Final Cut Express scratch disk not found.

I launch up final cut express and then it says "one or more scratch disks couldn't not be accesed." and it siad that it was the final cut express documents folder so I went on that and put all the permissions on read and write but it still said the same thing. Then it said it's location was the trash but nothing was in the trash so now I am very confused.

Your Default Scratch Disc setting is Macintosh HD>Users>Home>Documents>Final Cut Express Documents.
This is where all stuff goes unless you change your FCE>System Settings>Scratch Disc Tab.
Open the FCE System Settings>Scratch Disc, the top line, with the check marks, are where current captures go to.
If you decide to rename clips etc. do so within the FCE application and not through the Finder as the later will loose the links and FCE will have to re-connect.
If you right click a clip in the Browser or Timeline you will see the Reveal in Finder option, this will show you the file path to where the clip is located on your system.
If you see a red slash through the name, it's Offline and the path has somehow been broken. Reconnect it.
Al

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

hey there DavoMrMac,
according to Apple's 'site:
System Requirements
Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
512MB RAM
Display with 1024-by-768 (or higher) resolution
An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
Mac OS X 10.4.6 or later
QuickTime 7.0.4 or later
HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
DVD drive for software installation
i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

Final Cut Express Capture Scratch problem

I am unable to play my video clips as for some reason Final Cut Express is giving a message that a number of capture scratch files are missing. It does this for all clips (referring to different capture scratch files). This did not used to happen. I do not know why it now wants the files. I have looked at old backups and the files are not there (correctly I believe). I have reinstalled the software, copied the backed-up documents (that I know used to work) but still the same error.
Can anyone please help me sort this out (I need the files for Uni work on Monday!)
Thanks.

I occasionally have a similar problem. Tom said:
"Is the media for the project available somewhere on your computer?"
I suggest that you find the exact name of the Project file that is trying to find the lost Captured file(s). Then search the Mac for all occurrences of that file name. The missing Captured file(s) should be in a folder with the same name as the Project. For example, if the Project file is called: "my project file", then search for: "my project file". If they exist, that will find them. (It is possible that the actual Captured File(s) in the folder "my project file" might be named "Untitled", but open it anyway (by double-clicking it) and see if it looks like the missing captured file.
To search on the Mac, click anywhere in the desktop, do File > Find. In the resulting dialogue box choose "Search in:" = "Local discs", then type the filename and press ENTER. (Choosing "Local discs" rather than "Home" is important because the Captured Scratch might have been set to be on an external disc.)
Good luck.

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

Firewire 800 problem? cant see my Panasonic camcorder on Final Cut Express

Hi
I have a new IMAC 27 in, intel dual processor (which I love) and its running the lastest version of snow leopard. I got it for video editing (dec 09) and I'm fairly new to macs and the firewire 800.
I have a panasonic 3ccd camera nNV-GS500 and after finally figuring it out I got a new cable - a brand new firewire 800/400 cable. However nothing can be seen when I start up Final Cut pro express or imovie.
I have tried turning off mac, unplugging it, then turning on camera before turning on imac.
Looking at some of the threads it seems there are some issues for seeing camcorders with firewire 800 and that a firmware? (is this a download for hardware update) is an update is due - can anyone confirm what i should do.
thanks in advance

Cathy, welcome to the Discussions group.
Here is the list of camcorders supported by iMovie and Final Cut Express. Your camera is not in the lists but may still work.
http://support.apple.com/kb/HT3290
http://support.apple.com/kb/HT2948
When you are using the camera are you running it from its battery power or is it plugged into its own power source (same question would apply to your external drive which may have a problem if its not using its own power supply depending upon how much power it would draw from the computer and how much power it needs to be reliable). You should be running the camera from its own power supply.
When you are having a problem, isolate the sources of potential conflict. Make sure no other devices are plugged into the computer. That means you'll be transferring your video to your internal disk. You can always copy or move it later to an external disk if that's where you want to store it permanently.
Follow the instructions in your camera manual carefully and we hope that works. If it doesn't work, then be creative. If the manual says to start the camera first in PLAY mode, start it in RECORD mode but then switch to PLAY mode to jumpstart FCE or iMovie to recognize there's a camera installed. That hint was provided in another thread on this topic and worked for that person. You can vary starting the camera before FCE or iMovie and then try starting FCE or iMovie first followed by the camera. Just a few variations and hope again one works.
All variations fail, and the vendors web site indicates it should work, then maybe your Firewire port on the computer has a problem. Look in "About This Mac" to see the status of the Firewire service with different devices plugged in. It's not a common problem but can happen.

Final Cut Express 4 insufficient disk space for rendering

I have an iMac with a 2.8 GHz intel core 2 Duo, 2GB 667 MHz SDRAM, and a 750 GB hard drive with over 400 GB of free space. I just purchased Final Cut Express 4 and when I uploaded my first clip and I tried to render it, it said that I have "insufficient disk space to render." I don't understand how this is possible, I may just have a setting messed up but I need step by step instructions to switch that setting or fix my problem, thank you.

There is a Final Cut Pro forum, you probably repost there. I suspect someone with Final Cut Pro experience may have a better idea than this forum which is a general iMac forum. You can find that forum at:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Final Cut Express export options missing

I use the latest version of Final Cut Express on A G5 Quad and have recently lost certain options in the 'export using quicktime conversions' menu. I have always used Motion jpeg B but this is now missing along with Motion jpeg A!
This didn't coincide with any software installations or updates. And I've just run the Apple software update for FCE and Quicktime but there's still no difference.
Any ideas please??
Jason

Thanks Tom. The mjpeg compression options were there a week ago, I'll try installing the software on my laptop to see what happens. Anyhow I've noted that the stock agent will accept photo jpeg compression so perhaps I have nothing to worry about.
I appreciate your taking the time to advise me.
Jason

Why does my final cut express movie flicker after i put on disk using idvd

Why does my final cut express movie flicker after burning to a dvd using idvd. Its about 90 minutes long.

Hi
As Alchroma writes - more info needed.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Final cut express error insufficient disk space to render.

I have my final cut express projects saved to external hard drives. When working on a project and I try to render the file I am receiving the error message of insufficient space to render but I have over 25 gigs on my external hard drive. I can save the file but not render it. I have tried restarting computer and hard drive but problem continues. Any suggestions? I only have 4 gigs of space on my internal hardrive.

Make sure System Settings is correctly set to the external drive. You do not have enough space on your system drive. It is heavily fragmented and likely to cause serious problems. You should keep about 10% or more of the system drive free for the OS to work with.

Final Cut Express 2.0.3 and missing AGP graphic card

I had Final Cut Express 2.0.3 in my older G4 PPC Tower. But now that I've installed FCE 2.0.3 in my new iMac I get an error message telling me I need an AGP graphic card for the program to work.
What's the deal?
How can I fix this?
Thanks,
Panther

Have a read of this thread (link).
FCE 2 is a PowerPC application so you won't get great performance through Rosetta. FCE 2 is looking for AGP graphics which were standard at the time but no longer present. You should look at upgrading (link) for best performance.
mrtotes
Message was edited by: mrtotes: Fixed Link

Missing scratch disk cant reopen final cut express

Similar Messages

Maybe you are looking for