Missing Security Provider in Visual Administrator

Hi there,
I'm missing the service "Security Provider" in the Visual Administrator. There is only the service "Security", but it's not the same like "Security Provider". I need this service, because I try to run the Adobe Document Server on our Solution Manager.
Can anybody help me?
Thanks and best regards,
Max

Hi,
@ Sneha: yes, it's strange and I've checked all instances.
@ Tom: .. some information about the sap system:
- OS: AIX 6.1
- Component version: SAP EHP 1 for SAP Solution Manager 7.0
- SP: 24
I've followed this path:
--> cluster data -> instance_idxx -> server_idxx -> services ...
but I have also checked the following paths:
--> Global disptacher configuration -> services ....
--> Global server configuration -> services ...
I can only find the services security .. but this doesn't help me
Thanks for your answers.
Best regards,
Max

Similar Messages

  • Lost policy configurations in Security proivder  in Visual Administrator

    Hi Portal Gurus,
    I lost Polcy Configurations in Security Provider service in Visual Administrator.Now Iam not able to login to Visual Administrator its giving an error.But portal is up and running .when I check in visualadminconsole log saying "logon module not suceeded"
    Is there anyway to recover Policy configuration ?
    Regards
    Tami

    Pl follow the steps given in the below link.
    Thanks,
    Vuthpala
    [[http://help.sap.com/saphelp_nw70/helpdata/en/7f/c52442ad9f5133e10000000a155106/frameset.htm]]

  • Error in Visual Administrator Logon

    Hi everyone,
    I have installed PI with cluster, when i try open Integration Repository, appears the one message with error "...5000/P4".
    Then, I have change "P4 Provider" in Visual Administrator to resolve the error above.
    In bindHost i have changed the bindHost value for (myhost1:mythost2), list of hosts separed with ":".
    After change value above, i restarted the NW Instance.
    But now, when i try to do login in Visual Administrator, occurs the following error:
    Connot open connection on host "myhost" and port "50104"
    I already connect with ports 50000 until 50004 but always occurs the same error listed above.
    Can anyone help me

    Did you put the host name or the IP address (4 octets) <IP address>:<IP address>
    We run VCS cluster and we used this scenario it worked for us in the past XI 3.0 SP13.  We are now on PI 7.0 SP13 and removed the Hostbind value and that works just fine.  We are using virtual hostname with VCS and failover the hostname to the alternate host.  This seemed to work just fine in our DR test scenario integrated testing (in this test we did not run any actual load against our systems, but all checks were normal). 
    Hope that helps.

  • Error in security provider logon stack: no logon to visual administrator

    Probably i made a mistake in configuring SAP-J2EE-Engine security provider login modules.
    Now i cannot logon to Visual Administrator, it tells me
    "Error while connecting
    com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied."
    Is there a way to reset login module stack from configtool or in some config file?
    Many thanks in advance.
    Simone Zaffalon

    Hi
    you can configure your login stack configuration using config tool. Config tool works locally against the server's database, thus no authentication is required.
    1. Be sure that your server is not running! (shutdown SAP J2EE processes)
    2. Launch config tool ("use default db settings").
    3. switch to configuration editor mode (the most-right icon in the icon toolbar)
    4. navigate to security-->configurations
    Here you find your logon stacks and the login modules contained within them. Click on the "pencil" icon for changing your current configuration.
    See the thread below .It will resolve your issue
    Unable to access Visual Admin
    Points are welcome if it is helpful
    Koti Reddy

  • Security Provider for a web dynpro with tool Visual Administrator

    Hello all,
    after deploying successfully my web dynpro on the J2EE 7.0 WAS, I'm trying to set up authentication to it but I cannot find my applicaiton in the list of policy configurations of the Security Provider entry. When I try to add the path to my local web dynpro, the engine doesn't find it.
    I have noticed that all other policy configurations reference a servlet_jsp application. Should I transform my web dynpro into a servlet_jsp? How do I do that?
    Thanks for your input,
    Tanguy Mezzano

    Hello Marcel,
    in fact, I don't succeed to redeploy with another provider name... I have undeployed my webdynpro with SDM on the Java stack, but from NWDS, when I change the application-j2ee-engine.xml and application.xml files, and that I rebuild the webdynpro, when I run and deploy, it always redeploys under the former provider: local.
    When I create the application, I tell to use the existing component, should I select create a new one, but that means that I have to rebuild the whole application.
    Will then the webdynpro be in the Security Provider list, so that I can configure it with http header?
    Thx for your help,
    Tanguy

  • What is the "Guest" on Visual Admin's- security provider- login sessions ?

    If I get into the Visual Administrator -> security provider->login sessions, I see many users called "Guest" there.
    Could you help map those users to actual services.
    Also there could be many users called "Administrator" , how to map them to actual services?
    Thanks a lot!

    This might be helpful to understand the role of Guest user.
    http://help.sap.com/saphelp_nw04s/helpdata/en/9f/d770424edcc553e10000000a1550b0/frameset.htm
    -Pinkle

  • I don't see Web Services Security in Visual Administrator

    Iu2019m setting up ADS and when I start the Visual Administrator and select the node Server <x> / Services / Web Services Security from the Cluster tab, I donu2019t see any web service and the tab runtime is completely in gray and it doesnu2019t show me any data.
    It only show me, in the status bar, the message u201CGetting schema to java mapping for Web Service: AdobeDocumentServicesSec, style =u201D
    Thanks in advance for your awnsers.

    Hello Fernando,
    Please use the following link to get more info on Web Services Security.
    http://help.sap.com/saphelp_erp2005/helpdata/en/50/a5d13f83a14d21e10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=webservicessecurityinvisual+administrator&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
    Hope it is helpful..
    Cheers,
    Satish.

  • Visual Administrator file " J2eeadmingo.bat" is missing

    Hi
    I have downloaded sneak preview Portal version, in this J2EE/Admin/go.bat file is missing.
    Please let me know how to install this sutff for Visual Administrator.
    Thanks in Advance.
    Chandra.

    No need to install seaparately ,
    check the directory path as mentioned below
    <Drive>:\usr\sap\<SAPSID>\<Instance_Name>\j2ee\admin\go.bat
    double click go.bat  and try login with admin credentials.
    reference
    http://help.sap.com/saphelp_nw04s/helpdata/en/a6/21d1af99bb3f4a8846c30d30b5c179/frameset.htm
    Koti Reddy

  • Visual Administrator Go Script Missing

    I want to start Visual Administrator but script go.sh is not in /usr/sap/sid/JS25/j2ee/admin. Is there another way to start VA or wonder why the script is not in the directory. OS is Solaris 10.
    Thanks in advance
    Martin

    Hi,
    Do u have atleast go.bat?
    If you know how to write shell scripts, you can write your own go.sh based on go.bat or just copy , paste go.sh from another installation, that is also okay.
    But frankly its scary when you say, you dont find go. If one thing has been screwed with installation something else could have been screwed. Did you go through post installation sequence to check if Portal has been installed correctly. This is detailed in sap documentation.
    Harish

  • Missing Visual Administrator

    Hi there,
    I'm searching the visual administrator on Unix (only j2ee)  in the directory /usr/sap/<SAPSID>/JC<xx>/j2ee/admin/, but there is no subdirectory admin
    The system is NetWeaver CE 7.1 ... Is it possible to install the system without visual administrator?
    Thanks and best regards
    Max

    Hi Soujanya,
    I want to assign SLD Roles to Group NWDI.Administrator. Could you please guide me where can I do so?
    Thanks & Regards,
    Prashant

  • Security error in Visual Admin!

    Hi Experts,
      I've got the below error when I click on :
    Visual Admin ---> Server --> Services ---> Security Provider ---> ticket
    "Unable to update authentication stack for the selected configuration"
    and I found this in DefaultTrace.trc file
    "1.5 #001E0BBF78FC007900000020000017C4000453A8C918990F#1217884300281#com.sap.engine.services.security.authentication.logincontext#sap.com/irj#com.sap.engine.services.security.authentication.logincontext#Guest#0##n/a##ee766e90626911dda03b001e0bbf78fc#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Plain###Cyclic dependency has been found for security policy configuration named: ticket#"
    Any idea?
    Thanks!
    P.s.: I'm running EP7 SP15 , Windows 2003 server , Oracle 10.2.

    Hi
    I activated the sap* user and now I can logon to my system and Visual administrator.
    But I don't know what to modify about the SSO configuration.
    The logs (when I started without the activation of sap*) shows:
    #1.5^H#00000000000000500000002900002FA700045A7CBA7A30A6#1225391657856#com.sap.engine.services.security.resource.ResourceHandl
    eImpl#sap.com/com.sap.engine.class.download#com.sap.engine.services.security.resource.ResourceHandleImpl#J2EE_GUEST#0##n/a##3
    b73a600a6b111ddc302000000000000#SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#/System/Security/Audit/J2EE#Java###ACCES
    S.ERROR: Authorization check for caller assignment to J2EE resource [ : : : ].#4#SAP-J2EE-Engine#session-pool#
    get_session_pool#ALL#
    #1.5^H#00000000000000500000002B00002FA700045A7CBA7A3282#1225391657857#com.sap.engine.services.security#sap.com/com.sap.engine
    .class.download#com.sap.engine.services.security#J2EE_GUEST#0##n/a##3b73a600a6b111ddc302000000000000#SAPEngine_Application_Th
    read[impl:3]_13##0#0#Error#1#/System/Security#Java#security_4041##Cannot get login modules.##
    #1.5^H#00000000000000500000002C00002FA700045A7CBA7A34C4#1225391657858#com.sap.engine.services.security#sap.com/com.sap.engine
    .class.download#com.sap.engine.services.security#J2EE_GUEST#0##n/a##3b73a600a6b111ddc302000000000000#SAPEngine_Application_Th
    read[impl:3]_13##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.security.exceptions.BaseSecurityExc
    eption: Cannot get login modules.
            at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginModules(AuthenticationContextImpl.java:1
    68)
            at com.sap.engine.services.servlets_jsp.server.servlet.PutProtectionFilter.ensureUploadRoleCreated(PutProtectionFilte
    r.java:105)
            at com.sap.engine.services.servlets_jsp.server.servlet.PutProtectionFilter.init(PutProtectionFilter.java:53)
            at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addFilter(WebComponents.java:198)
            at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadFilters(ApplicationThreadIn
    itializer.java:292)
            at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitialize
    r.java:107)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
            at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:627)
            at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:513)
            at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
            at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:119)
            at com.sap.engine.services.security.server.AuthenticationContextImpl.getSessionPool(AuthenticationContextImpl.java:39
    5)
            at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginContextFactory(AuthenticationContextImpl
    .java:740)
            at com.sap.engine.services.security.server.AuthenticationContextImpl.getAppConfigurationEntries(AuthenticationContext
    Impl.java:751)
            at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginModules(AuthenticationContextImpl.java:1
    65)
            ... 9 more
    Do you know what parameters or setting did I miss?
    Thank you so much for your help !
    Regards

  • Cannot access key storage in Visual Administrator

    Hi,
    I cannot access the key storage node (==> Host ==> Server ==> Services ==> Key Storage) in Visual Administrator.
    Everytime I click on the key storage node an error message pops up. It says:
    <b>IAIK security library not found
    java.lang.NoClassDefFoundError:iaik/security/provider/IAIK</b>
    According to SAP (http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm) the SAP Cryptographic Toolkit has to be installed to use the Key Storage functionality of the Visual Administrator. The SAP Cryptographic toolkit has been deployed.
    Does anyone know where I can get that library and where I am supposed to put it? We work with <b>SAP NetWeaver '04 WebAS Java 6.40 SP14</b>.
    I appreciate any kind of help.
    Regards,
    Martin

    Hi,
    The missing class should be in the iaik_jce.jar
    archive. This archive is present in folder \usr\sap\<SID>
    \sys\global\security\lib\tools(or)engine.
    Copying this archive to the visual admin's <j2ee-install>
    \admin\lib folder, this workaround can solve your issue.
    You may also need unlimited strength jurisdiction
    policy depending on your JDK version. For more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm ->
    Deploying SAP Java Cryptographic Toolkit.
    Also check SAP Note: 891666
    Hope it helps..
    Regards
    Srikishan

  • How to add a components in Visual Administrator??

    Hi all,
    how can I add a component in the Security Provider service inside the Visual Administrator??
    Thanks all.
    Vito

    Solved on my own.

  • User Authentication Failed via http BUT not with Visual Administrator !!?

    OS : Win 2k3 Server UK * DB : SQL Server 2005
    SAP Netweaver 2004s Application Java
    Hi All,
    Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
    Using the user ‘Administrator’, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
    At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
    Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
         security.3.log
         <i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest     | LOGIN.ERROR     | null     |      | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
         server.0.log
         <i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
    &#61664; I tried to connect http://host:port/sld same problem User Authentication Failed
    <b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
    Thanks in advance
    Yves

    Hi,
    I found the solution this last week-end.
    This behavior let's thinking to a problem of authentication.
    But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
    Cheers
    Yves

  • Dispatcher - J2EE status unavailable, J2EE Visual Administrator unavailable

    Greeting experts,
    I present to you a problem that my company is having trying to get Portal and the WAS up and running.  I was handed this box after  a former employee left our company. There was no knowledge handover, so I am looking at a black box.  The main problem we are having is our main server (double stack ABAP and J2EE) simply will not get the Java stack up and running no matter how much we tweak the profiles or play with the network. I have been searching these forums for answers, and while I have gained a great deal of knowledge form the very generous people on this site, my problem still eludes me.  I hope I can provide enough technical answers to help anyone that might have an idea of what I can do.
    SAP Management Console - disp+work.exe: Running but Dialog Queue info unavailable, J2EE status info unavailable.
    J2EE Visual administrator - Unable to log onto localhoast
    Windows Event Viewer: SAP-Basis System: Transaction Canceled ITS_P               001 (          )
    Instance Profile:
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
    DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
    jstartup/trimming_properties = off
    jstartup/protocol = on
    jstartup/vm/home = D:\j2sdk1.4.2
    jstartup/max_caches = 500
    jstartup/release = 700
    jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties)
    j2ee/dbdriver = D:\sapdb\programs\runtime\jar\sapdbc.jar
    PHYS_MEMSIZE = 2048
    #old_value: 5
    rdisp/wp_no_dia = 10
    #old_value: 2
    rdisp/wp_no_btc = 5
    rdisp/j2ee_start_control = 1
    rdisp/j2ee_start = 1
    rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
    #old_value: $(DIR_EXECUTABLE)\jcontrol$(FT_EXE)
    exe/j2ee = $(DIR_EXECUTABLE)\jcontrol.exe
    rdisp/j2ee_timeout = 600
    rdisp/frfc_fallback = on
    icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
    #old_value: PROT=HTTP,PORT=5$$80
    icm/server_port_0 = PROT=HTTP, PORT=51080, TIMEOUT=900
    SAP Messaging Service parameters are set in the DEFAULT.PFL
    ms/server_port_0 = PROT=HTTP,PORT=81$$
    rdisp/wp_no_enq = 2
    rdisp/wp_no_vb = 1
    rdisp/wp_no_vb2 = 1
    rdisp/wp_no_spo = 1
    rsdb/dbid = ERP
    dbs/ada/schema = SAPERP
    #old_value: 300000
    abap/buffersize = 350000
    login/no_automatic_user_sapstar = 0
    login/password_history_size = 1
    login/min_password_lng = 4
    Jcontrol: Migrated Profile Parameter
         create at Wed Jun 06 06:43:16 2007
    #old_value: 1039293
    j2ee/instance_id = ID1039293
    rdisp/max_wprun_time = 100000
    Added by TH 21.06.07 (int. ITS, int. IPC)
    ssl/ssl_lib = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
    sec/libsapsecu = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
    ssf/ssfapi_lib = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
    icm/host_name_full = iwdfvm2160.wdf.sap.corp
    #old_value: PROT=HTTP, PORT=1080, TIMEOUT=900
    icm/server_port_0 = PROT=HTTP, PORT=51080, TIMEOUT=900
    #old_value: PROT=HTTPS,PORT=51081, TIMEOUT=900
    icm/server_port_1 = PROT=HTTPS, PORT=51081, TIMEOUT=900
    #old_value: PROT=SMTP,PORT=25001, TIMEOUT=900
    icm/server_port_2 = PROT=SMTP, PORT=25001, TIMEOUT=900
    vmcj/enable = on
    #vmcj/option/ps = 512M
    #vmcj/option/maxJavaHeap = 200M
    login/accept_sso2_ticket = 1
    #parameter created                          by: IDADMIN      27.04.2006 20:04:36
    #em/global_area_MB = 384
    #old_value: 1                                                                            changed: J2EE_ADMIN 11.08.2006 19:02:40
    #old_value: 2                                                                            changed: J2EE_ADMIN 11.08.2006 19:11:41
    #old_value: 1                                                                                changed: CHENW 11.08.2006 19:12:57
    login/create_sso2_ticket = 2
    icm/keep_alive_timeout = 900
    #parameters added for xCQM / PDCE
    enque/table_size = 8192
    abap/shared_objects_size_MB = 200
    Thanks for anyone that can help with this.  It is much appreciated, as it has stumped our BASIS guys for weeks.
    Cheers
    Ryan Geiger

    (logs cont.)
    dev_w0:
    B Wed Jul 29 01:13:59 2009
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' ...
    B  Library 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' loaded
    B  Version of 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' is "700.08", patchlevel (0.184)
    B  New connection 0 created
    M sysno      10
    M sid        ERP
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    185
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        8420
    M
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 8420) [dpxxdisp.c   1347]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          34080     (1704)
    M  DpShMCreate: sizeof(tm_adm)          4415616     (21968)
    M  DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1544)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06A60040, size: 5091280)
    M  DpShMCreate: allocated sys_adm at 06A60040
    M  DpShMCreate: allocated wp_adm at 06A62118
    M  DpShMCreate: allocated tm_adm_list at 06A6A638
    M  DpShMCreate: allocated tm_adm at 06A6A668
    M  DpShMCreate: allocated wp_ca_adm at 06EA06E8
    M  DpShMCreate: allocated appc_ca_adm at 06EA64E8
    M  DpShMCreate: allocated comm_adm at 06EA8428
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06F292E8
    M  DpShMCreate: allocated gw_adm at 06F29328
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 06F29358
    M  DpShMCreate: allocated wall_adm at 06F29360
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 96 MB
    M 
    M Wed Jul 29 01:14:00 2009
    M  ThInit: running on host tx300-s4
    M 
    M Wed Jul 29 01:14:01 2009
    M  calling db_connect ...
    C 
    C  DBSDBSLIB : version 700.08, patch 0.184 (Make PL 0.185)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.184) Create index serial for MaxDB 7.6 (note 1267841)
    C    (0.184) More trace in case of packed to string conversion error (note 1262799)
    C    (0.182) R3trans export aborts with signal 6 (note 1262245)
    C    (0.169) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
    C    (0.167) DB2 - z/OS: performance improvement for long running LUWs (note 1179742)
    C    (0.158) No truncation warnings with tracelevel 1 (note 1164122)
    C    (0.152) Corrections of odbc-based dbsl (note 1135165)
    C    (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
    C    (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
    C    (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 002-121-083-965
    C  SQLDBC Library Version : libSQLDBC 7.6.4    BUILD 016-123-191-583
    C  SQLDBC client runtime is MaxDB 7.6.4.016 CL 191583
    C  SQLDBC supports new DECIMAL interface : 0
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports keepAlive indicator   : 0
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C 
    C Wed Jul 29 01:14:02 2009
    C  Attach to SAP DB : Kernel    7.6.04   Build 016-123-191-583
    C  Database release is SAP DB 7.6.04.016
    C  INFO : Database 'ERP' instance is running on 'iwdfvm2160'
    C  INFO : SAP DB Packet_Size = 131072
    C  INFO : SAP DB Min_Reply_Size = 4096
    C  INFO : SAP DB Comm_Size = 126976
    C  INFO : DBSL buffer size = 126976
    C  INFO : SAP DB MaxLocks = 300000
    C  INFO : Connect to DB as 'SAPERP'
    C  Command info enabled
    C  Now I'm connected to SAP DB
    C  00: iwdfvm2160-ERP, since=20090729011401, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090729 011401 iwdfvm2160     
    C  INFO : SAP RELEASE (DB) = 700
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Wed Jul 29 01:14:04 2009
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0A590040, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 2C520040, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 12D70040, size: 131072000)
    M  SHM_ROLL_ADM               (addr: 0A9D0040, size: 2678942)
    M  SHM_PAGING_ADM          (addr: 0AC60040, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0ACF0040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 071B0040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 96 MB
    B  dbntab: NTAB buffers attached
    B  dbntab: Buffer FTAB(hash header)  (addr: 0AE10088, size: 536)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0AE102A0, size: 160036)
    B  dbntab: Buffer FTAB(item array)   (addr: 0AE373C8, size: 720000)
    B  dbntab: Buffer FTAB(data area)    (addr: 0AEE7048, size: 30720000)
    B  dbntab: Buffer IREC(hash header)  (addr: 0CC40088, size: 536)
    B  dbntab: Buffer IREC(anchor array) (addr: 0CC402A0, size: 160036)
    B  dbntab: Buffer IREC(item array)   (addr: 0CC673C8, size: 180000)
    B  dbntab: Buffer IREC(data area)    (addr: 0CC932E8, size: 6144000)
    B  dbntab: Buffer STAB(hash header)  (addr: 0D270088, size: 536)
    B  dbntab: Buffer STAB(anchor array) (addr: 0D2702A0, size: 160036)
    B  dbntab: Buffer STAB(item array)   (addr: 0D2973C8, size: 180000)
    B  dbntab: Buffer STAB(data area)    (addr: 0D2C32E8, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 0D5C0088, size: 2616)
    B  dbntab: Buffer TTAB(anchor array) (addr: 0D5C0AC0, size: 160036)
    B  dbntab: Buffer TTAB(item array)   (addr: 0D5E7BE8, size: 480000)
    B  dbntab: Buffer TTAB(data area)    (addr: 0D65CEE8, size: 5840000)
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 20, CON_ID = -1
    B  dbstat: TABSTAT buffer attached (addr: 1AA8F048)
    B  dbtbxbuf: Buffer TABL  (addr: 0DBF00C8, size: 30000000, end: 0F88C448)
    B  dbtbxbuf: Buffer TABLP (addr: 108F00C8, size: 10240000, end: 112B40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 0F8900D0, size: 4194304, end: 0FC900D0)
    B  dbexpbuf: Buffer ESM   (addr: 112C00D0, size: 4194304, end: 116C00D0)
    B  dbexpbuf: Buffer CUA   (addr: 0FCA00D0, size: 3072000, end: 0FF8E0D0)
    B  dbexpbuf: Buffer OTR   (addr: 116D00D0, size: 4194304, end: 11AD00D0)
    B  dbcalbuf: Buffer CALE  (addr: 11AE0040, size: 500000, end: 11B5A160)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 05E06C90
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 126500A8
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 126505F0
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2236 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  **GENER Trace switched on ***
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 23068kb, dir_size: 22988kb.
    A  Attached to PXA (address 3C550040, size 350000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=5D44C000 leng=209698816 end=69C48000)
    A  >> Shm MMADM area (addr=5FEFAC30 leng=1278592 end=60032EB0)
    A  >> Shm MMDAT area (addr=60033000 leng=163659776 end=69C47000)
    A  RFC Destination> destination tx300-s4_ERP_10 host tx300-s4 system ERP systnr 10 (tx300-s4_ERP_10)
    A  RFC Options> H=tx300-s4,S=10,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 41588 bytes at 071D0040
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\ERP\DVEBMGS10\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...completed with return code 5.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:700.08]):
    B     max_blocking_factor =  10,  max_in_blocking_factor      = 127,
    B     min_blocking_factor =  10,  min_in_blocking_factor      = 127,
    B     prefer_union_all    =   1,  prefer_join                 =   0,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B     convert AVG         =   0,  alias table FUPD            =   0,
    B     escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x0f,  character encoding          = STD / <none>:-,
    B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.185.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [19]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    A 
    A Wed Jul 29 01:14:05 2009
    A  **GENER Trace switched off ***
    M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
    B 
    B Wed Jul 29 01:14:09 2009
    B  table logging switched off for all clients
    M 
    M Wed Jul 29 01:14:25 2009
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 06A30040
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 06A307A8
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 06A307E0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 06A307EC
    M  *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c  947]
    W 
    W Wed Jul 29 01:15:06 2009
    W        *** ERROR => plugin: Invalid request method (ICMTRGURLUPLD). Request aborted. [itsphttp.cpp 618]
    M        ***LOG W08=> ICMTRGURLUPLD& [itsphttp.cpp 619]
    W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
    W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   712]
    W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    878]
    M    ***LOG W03=>  [itsplxx.c    879]
    W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    881]
    W    *** ERROR => Raise Last error:[1 from: itspxx.cpp  :713] [itsplxx.c    1216]
    W    *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp   713]
    W 
    W Wed Jul 29 01:16:06 2009
    W        *** ERROR => plugin: Invalid request method (ICMTRGURLUPLD). Request aborted. [itsphttp.cpp 618]
    M        ***LOG W08=> ICMTRGURLUPLD& [itsphttp.cpp 619]
    W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
    W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   712]
    W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    878]
    M    ***LOG W03=>  [itsplxx.c    879]
    W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    881]
    W    *** ERROR => Raise Last error:[1 from: itspxx.cpp  :713] [itsplxx.c    1216]
    W    *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp   713]

Maybe you are looking for