Missing Segments of data

Dear All,
We are triggering the vendor details through EDI transmission to our US clients. But they are complaining that some segments of a particular vendor(that vendor code is 2641) is missing .
Can any one of you please let me know what will be the reason for this?
Its very urgent ...
please
Thanks in advance.
Regards
Senthil
Bangalore.

Hi Senthil,
Please give the answers to the following questions:
1. What is the EDI subsytem ? (Gentran, Mercator, See beyond, Inovis, Websphere etc.,)
2. What is type of file that is going to vendor (Odette, EDIFACT, X12, VDA etc.,)
3. Are you getting the idoc with all the segments according to that particualar vendor requirement ?
4. What is the message type and Idoc type you are using ?
To find the IDOC: go to WE02 and give the dates and give the direction and partner number. Check the IDOC's.
Regards
Kannaiah

Similar Messages

Adding an existing segment in data record of IDOC

Hi All,
I am using basic type ORDERS04 to send IDOC out of SAP system.
Currently its not sending the segment E1EDP04 in the data record.
What should be done to get this segment in the data record of IDOC?
Also, can any one tell me the significance of VIEW when i double click on Message type of a particular partner in WE19.
Thanks,
Yogeeta

What is the message type?
E1EDP04 IDoc: Document Item Taxes
First you need to find out why required segment is not being generated, is there any data missing in document due to which the segment is missing?
If that (missing segment) is sap-standard funtionality and you would like to include the segment in IDoc then you need to implement the user-exit. And to find the correct user-exit you need Message Type.

Error OTF end command // missing in OTF dat

Hi
I am converting a smartform of a PO into a PDF. when i am using the option of pint immediately in message option of PO. I am getting this error OTF end command // missing in OTF dat . when i am using option 3 which in not print immediately. i am able to convert it into pdf file and save in my local folder. please advice.

when you click the message button while creating a PO. it will take to next page where you add your output type that is output, partner etc.. after you add and click on further data button there you will have option for dispatching here when you add slect option 4 whihc is print immediately. then i am getting the error. if i am using the other options i am able to down load into pdf but not able to see print preview. please advice

G/L Account is missing in item data in sales order with reference to quotation

Dear SAP Guru,
I have a problem in accordance with G/L Account missing sales order. Initially, please find the below lines.
1. If I do the sales order without reference to quotation there is no error in G/L Account missing.
2. If I do the sales order with reference to quotation there is an error that G/L account is missing in item data.
I have checked the VKOA, the settings are fine.
Kindly anyone of you resolve this issue.
Warm Regards
Vidya Sagar

G/L account is missing in item data.
Many times, it has been discussed on this issue in SCN and please search with the same text so that you will find many threads asking various areas to check. Take the inputs from there and post here still if you have issue.
G. Lakshmipathi

OTF end command // missing in OTF data when using CONVERT_OTF_2_PDF

Hi
When using the function module CONVERT_OTF_2_PDF I am getting the strange scenario that for some users it is giving the error message "<u><b>TD 030: OTF end command // missing in OTF data</b></u>".
I am executing this function module using the OTF output data received from a smartform executed with the parameter control-parameters-getotf = X and I am not formatting it in any way.
any assistance in this is much appreciated.

hi
good
go through this link,which ll give you detail idea about this function module
http://www.jt77.com/development2/programming-07636.html
thanks
mrutyun^

Missing ''foreign trade data''

Hi,
there is in System several ''S1''- cancelled invoices
still open.
There is no accounting document created
because of error message Missing ''foreign trade data''.
But the user is unable to complete the data because
several fields are coming automatecly from precedent document.
and i guess the document s will stay open untill
its relaesed to accounting.
How could we clear those documents?
Any idee?
Thanks in advance
If helpful points will be added
William

Hi,
For the present generated billing documents you have to do it manually..
Billing document
Goto-header->Foreign trage/customs-handling-
modes of transport ( fill maully) and other necessary data if required fill it.
Billing document i
Goto itemforieng trade item> legal categorization--->
enter comm/imp code.no.
But here after you want it automatic this process..
You can assign the default values in
Spro-> Sales and distribution> foreign trade/customs ---> transportation data ---> Default Values For Foreign Trade Header Data
in this screen cilck on country for want to maintain
in the next screen in tranport tab u can maintain the available ModeOfTrnsprt-Borde.
The commodity code will be directly copied into item level into billing document if maitained in material master record.
Kindly Reward points if helpfull.
Regards
vK

Reporting Agent Web Templates. I'm missing previous precalculated data.

Hello Gurus. I'm precalculating a web template that has variables, so the customizing has variants for the variable values. The web template shows weekly information and the user needs to see historic reports, from previous weeks.
But when a run the planification package I lost the previous precalculated web templates. The only way I have found to obtain the reports for various weeks has been creating a variant for each week. But the users needs to consult a complete year, 52 weeks, so 52 variants!!
How can I create new static data for the reports without missing the old data?

hello,
Tell me how are you scheduling the package..? is that on EVENT??
have you craeted an event in SM62 first??
--Nandita

Reg: Missing segment E1EDP01 in outgoing IDOC

hello guys,
I have got an issue in IDOC.
The idoc has a missing segment E1EDP01.
Flow is SAP to EAI to VENDOR.
I wnt to know why idoc is triggered without this segment E1EDP01.

How is this IDOC created? own programm?

Lumia 925 is missing "automatically update date an...

My Lumia 925 is missing "automatically update date and time" setting. I have the latest firmware 3049.0000.1330.0009. The phone is not locked to any carrier.
Any ideas?
Solved!
Go to Solution.

Check you have all the latest system app updates. To do so, download and install an app called Lumia System Updater and use it to check and update the system apps as necessary.

Archive Smartform Copies - Error - OTF end command // missing in OTF data

Hi All,
We are printng invoices and archiving them at the same time.
When I try to print and archive just the original invoice it works fine
That is , it prints and archives.
However when I set the flag SSFCOMPOP-TDARCCOP to 'X' (Archive Copies as well),
I get the error OTF end command // missing in OTF data.
Im guessing that the system tries to archive multiple copies and the End of File Command // at the end of each copy is causing the issue. But I dont know how to go about solving it.
Regards,
Nehal.

Implemented SAP Note 1123505 - OTF-PDF conversion. Archiving several copies

Datafile not restored due to missing or corrupt data

Hi all,
I was asked to restore a RMAN backup which we got from another region, the rman backup contains controlfiles and datafiles as compressed backupset.
oracle version is 10.2.0.3.0
aix version 6
First, I have restored the control file using the below command:
run
+{+
allocate channel t1 type disk;
restore controlfile from '/oracle/app/prod/rman/cf_t799873684_s17_p1';
alter database mount;
+}+
Second, I have cataloged the backup piece:
catalog backuppiece '/oracle/app/prod/rman/df_t794754324_s12_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t793567544_s13_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t731097654_s14_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792538698_s15_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792183472_s16_p1';
catalog backuppiece '/oracle/app/prod/rman/cf_t799873684_s17_p1';
Third, used below command to restore:
+run {+
allocate channel t1 type disk;
allocate channel t2 type disk;
allocate channel t3 type disk;
allocate channel t4 type disk;
set newname for datafile 01 to '/oracle/app/oradata/dbprod/system01.dbf';
set newname for datafile 02 to '/oracle/app/oradata/dbprod/undotbs01.dbf';
set newname for datafile 03 to '/oracle/app/oradata/dbprod/sysaux01.dbf';
set newname for datafile 04 to '/oracle/app/oradata/dbprod/users01.dbf';
set newname for datafile 06 to '/oracle/app/oradata/dbprod/datafile005.dbf';
set newname for datafile 07 to '/oracle/app/oradata/dbprod/datafile006.dbf';
set newname for datafile 08 to '/oracle/app/oradata/dbprod/datafile007.dbf';
set newname for datafile 09 to '/oracle/app/oradata/dbprod/datafile008.dbf';
set newname for datafile 10 to '/oracle/app/oradata/dbprod/datafile009.dbf';
set newname for datafile 11 to '/oracle/app/oradata/dbprod/datafile010.dbf';
set newname for datafile 14 to '/oracle/app/oradata/dbprod/datafile001.dbf';
set newname for datafile 15 to '/oracle/app/oradata/dbprod/datafile002.dbf';
set newname for datafile 16 to '/oracle/app/oradata/dbprod/datafile003.dbf';
set newname for datafile 17 to '/oracle/app/oradata/dbprod/datafile004.dbf';
set newname for datafile 18 to '/oracle/app/oradata/dbprod/indfile001.dbf';
set newname for datafile 19 to '/oracle/app/oradata/dbprod/indfile002.dbf';
set newname for datafile 20 to '/oracle/app/oradata/dbprod/indfile011.dbf';
restore database;
switch datafile all;
recover database;
+}+
But while restoring, I got error like below:
Starting restore at 22-OCT-12
channel t1: starting datafile backupset restore
channel t1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /glotam3/oracle10g/oradata/T24DEV3/users01.dbf
restoring datafile 00007 to /glotam3/oracle10g/oradata/T24DEV3/datafile006.dbf
restoring datafile 00011 to /glotam3/oracle10g/oradata/T24DEV3/datafile010.dbf
restoring datafile 00012 to /glotam3/oracle10g/oradata/T24DEV3/recop01.dbf
restoring datafile 00014 to /glotam3/oracle10g/oradata/T24DEV3/datafile001.dbf
channel t1: reading from backup piece /oracle/app/prod/rman/df_t793567544_s13_p1
channel t2: starting datafile backupset restore
channel t2: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /oracle/app/oradata/dbprod/system01.dbf
restoring datafile 00003 to /oracle/app/oradata/dbprod/sysaux01.dbf
restoring datafile 00008 to /oracle/app/oradata/dbprod/datafile007.dbf
restoring datafile 00015 to /oracle/app/oradata/dbprod/datafile002.dbf
restoring datafile 00018 to /oracle/app/oradata/dbprod/indfile001.dbf
channel t2: reading from backup piece /oracle/app/prod/rman/df_t792538698_s15_p1
channel t3: starting datafile backupset restore
channel t3: specifying datafile(s) to restore from backup set
restoring datafile 00002 to /oracle/app/oradata/dbprod/undotbs01.dbf
restoring datafile 00009 to /oracle/app/oradata/dbprod/datafile008.dbf
restoring datafile 00013 to /oracle/app/oradata/dbprod/prefstat01.dbf
restoring datafile 00016 to /oracle/app/oradata/dbprod/datafile003.dbf
restoring datafile 00019 to /oracle/app/oradata/dbprod/indfile002.dbf
channel t3: reading from backup piece /oracle/app/prod/rman/df_t731097654_s14_p1
channel t4: starting datafile backupset restore
channel t4: specifying datafile(s) to restore from backup set
restoring datafile 00006 to /oracle/app/oradata/dbprod/datafile005.dbf
restoring datafile 00010 to /oracle/app/oradata/dbprod/datafile009.dbf
restoring datafile 00017 to /oracle/app/oradata/dbprod/datafile004.dbf
restoring datafile 00020 to /oracle/app/oradata/dbprod/indfile011.dbf
channel t4: reading from backup piece /oracle/app/prod/rman/df_t794754324_s12_p1
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t793567544_s13_p1
ORA-19612: datafile 11 not restored due to missing or corrupt data
channel t3: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t731097654_s14_p1 tag=TAG20120822T184703
channel t3: restore complete, elapsed time: 01:06:05
channel t2: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t792538698_s15_p1 tag=TAG20120822T184703
channel t2: restore complete, elapsed time: 01:09:10
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t794754324_s12_p1
ORA-19612: datafile 20 not restored due to missing or corrupt data
failover to previous backup
released channel: t1
released channel: t2
released channel: t3
released channel: t4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/22/2012 15:11:23
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN>
This same rman backup has been restored in other server, the commands were same but the db was not restored in my server.
Kindly help me....
Thanks in advance,
nonuday

Hi mseberg,
When I executed the below command with same date. This is what is got and am not able to understand what it says.
RMAN> run
+{+
SET UNTIL TIME "TO_DATE('10/22/2012','MM/DD/YYYY')";
restore database preview;
+}2> 3> 4> 5>+
executing command: SET until clause
Starting restore at 23-OCT-12
using channel ORA_DISK_1
List of Backup Sets
+===================+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+8 Full 11.68G DISK 02:10:15 22-AUG-12+
BP Key: 18   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t793567544_s13_p1
List of Datafiles in backup set 8
File LV Type Ckp SCN    Ckp Time Name
+4 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/users01.dbf+
+7 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile006.dbf+
+11 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile010.dbf+
+12 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/recop01.dbf+
+14 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+10 Full 11.35G DISK 02:15:49 22-AUG-12+
BP Key: 16   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t792538698_s15_p1
List of Datafiles in backup set 10
File LV Type Ckp SCN    Ckp Time Name
+1 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/system01.dbf+
+3 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/sysaux01.dbf+
+8 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile007.dbf+
+15 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile002.dbf+
+18 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+11 Full 10.78G DISK 02:20:07 22-AUG-12+
BP Key: 15   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t731097654_s14_p1
List of Datafiles in backup set 11
File LV Type Ckp SCN    Ckp Time Name
+2 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/undotbs01.dbf+
+9 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile008.dbf+
+13 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/prefstat01.dbf+
+16 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile003.dbf+
+19 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile002.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+12 Full 16.83G DISK 03:25:43 22-AUG-12+
BP Key: 14   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t794754324_s12_p1
List of Datafiles in backup set 12
File LV Type Ckp SCN    Ckp Time Name
+6 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile005.dbf+
+10 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile009.dbf+
+17 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile004.dbf+
+20 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile011.dbf+
archive logs generated after SCN 30013719101 not found in repository
Media recovery start SCN is 30013719101
Recovery must be done beyond SCN 30013719101 to clear data files fuzziness
Finished restore at 23-OCT-12
RMAN>
Thanks for reply,
Nonuday

Missing segment during invoice for specific user

Hi Experts,
While doing a post goods issue and generating an invoice, the idoc generated from this has missing segments, this only happens when using a spcecific RFC user name (with all authorizations enabled), however, when using an ordinary sap account, the idoc is created successully with no missing segments. Do you have any advide on what seems to be causing the issue? Any help is very much appreciated.
Thanks in advance.

Hi
CRM 5.0
its not related to application,modification ..but my problem is the find label is working for some of the users.but some of the users find label is not there,
plz let me know where i have to make corrections for this problem........

We have missing CRM survey data on our report. .

Hi,
We have missing CRM survey data on our report. .(BI report)
After further investigations, we have found out that the data is not being extracted by our CRM BI extractor
0SVY_DATA_1 (CRM Survey Results).
Is there is any problem related to CRM configuration.
The survey is a valid survey .
Please mention your inputs.wat can be the problem here, or anybody suggest any solution
Thanks & Regards
Prajith P
Edited by: Prajith Prabhakara on Sep 28, 2011 12:39 PM

Hi,
I am closing the issue.
Thanks
Prajith P

I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian

Missing Weight / Volume data in handling unit

Hi; I'm trying to realize automatic packing function for outbound delivery.
System works well after POP1 - creating packing instruction, POF1 packing instruction determination. However, after I change package material master data (Volume / Weight), handling unit is missing weight, Volume data in new created delivery document although packing instruction has been determined.
Checking Packing instruction master data, total weight / volume has been automatically updated. Why new handing unit is missing weight / volume data during automatic packing transaction in delivery?
Is there any things i'm missing? Can anyone help for this? Thanks.

Thanks for your answers, Csaba and muthuraman.d.
Yes. I was also supposing that HU can automatically calculate weight / Volume from Material master data (package material & packed material). It worked before(the week before last week). Now new generated HU are missing those data. This error is in case on all deliveries.
Even I create new package material / new finish goods and brand NEW packing instruction for testing, HU can be automaticly generated by auto packing button. But they are missing weight / volume data. This problem seems not relevant to master data(package material weight / volume) changes. I'm suspecting system program has some changes but I don't know where it is.
Only when I set indicator at packing instruction - " Maintain Weight manually" or "Maintain Volume Manually", those weight / volume data can be coppied into new generated HU in delivery which is full packed.
System really can automatic calculate weight / volume data directly from Material master data for HU before(not set - "Maintain xxx manually" in packing instruction). What's wrong with it now?

Missing Segments of data

Similar Messages

Maybe you are looking for