Missing Serial Numbers for CS4 COmponents & Acrobat X Pro

Greetings!
I installed CS5.5 on my 32-bit system, which means I had to install the included "complimentary" CS4 copies of After Effects & Premiere Pro. As stated in one of the Adobe troubleshooting sections I read, the CS4 components require a separate CS4 serial number. As also stated in that same section, Acrobat and CS products have different serial numbers. Unfortunately, I was only given one serial number, and that one was for CS5.5. See image below for related screenshot collage.
The serial number has been intentionally rendered unreadable for obvious reasons, but it's sufficient to show that there's only one serial number associated with my products. I need serial numbers for the 32-bit CS4 components and for Acrobat X Pro. How do I get them? I tried chatting with an Adobe support agent a couple weeks ago, and he told me he couldn't help me. He said I needed to get the serial numbers from the company that provided me with the CS5.5 serial number (Identit-E, who evidently gets involved with providing serial numbers for validated student license purchases). They said they couldn't help me, and that I had to get with Adobe! So I'm being run around in circles with nobody taking responsibility! And when I tried to follow instructions and a link that I thought MIGHT give me some answers (on this page: http://kb2.adobe.com/cps/517/cpsid_51791.html)...
"In North America: If you're a student or educator, look in the Adobe Student Licensing website"
...I got a warning from my browser that it's an untrusted site:
I'm not into taking that kind of risk.
So I've done about all I can think to do, including contacting the actual reseller who sold me the software (no word from them yet). Nobody's claiming responsibility, and they're pointing at each other. That leaves me in the middle with no answers and only partially working, very expensive software!
If there are any ideas from folks on this forum, I'm all ears!
Thanks!
Scott

ScottSutherland can you please private message me with your contact information. So we can work on resolving your difficulties.

Similar Messages

Where can i locate the serial number for the adobe acrobat xi pro?

where can i find the serial number for the Adobe Acrobat XI pro?

Hi 1praise,
Please refer the KB Doc : http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Missing Serial Numbers for Adobe Creative Suite 5 Web Premium

I purchased Adobe Creative Suite 5 Web Premium with the education discount in 2010. My computer crashed and I am trying to install the software on my new computer. I do not have the serial numbers anywhere. For some reason, the Adobe Acrobat 9 serial number was saved in my Adobe Account. However, the remainder of the applications, which were installed on the same day, were not saved in my account? So now, I have no way of installing anything except Adobe Acrobat 9. Is there a way to have a new serial number issued to you? Or a way for Adobe to use my Acrobat 9 serial number to track down the others? I have all the installation files. Is it hidden in one of those files possibly?

Try chat, they might be able to assist you in finding it thru your account. You might be able to use the Acrobat info to convince them that you also have the CS5 under your account.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I originally bought Acrobat 9 and later upgraded to Acrobat 10 pro. My computer crashed and I am trying to re-install Acrobat 10 pro. I have serial numbers for Acrobat 9 and an Acrobat 10 pro upgrade. What do I do?u

I originally bought Acrobat 9 and later upgraded to Acrobat 10 pro. My computer crashed and I am trying to re-install Acrobat 10 pro. I have serial numbers for Acrobat 9 and an Acrobat 10 pro upgrade. What do I do?

Hi Shane,
Please download Acrobat X Pro from the link below.
http://www.adobe.com/downloads/other-downloads.html
Install the software and when prompted for the previous version qualifying product, select Acrobat 9 and enter the serial key of Acrobat 9.
This should install and activate Acrobat X Pro on the machine.
Regards,
Anand

Serial Numbers for Components in production Order

Hi All
I want to enter the serial numbers of the components in the production order. How can we do it.
I am able to enter the serial number of the FG in the production order, but want to enter for the Components as well.
Any direction will be greatly apprecialted.
Tom

Hi,
You can assign componenets (with serial nos.) to FG ( also with serial nos.) with COIB after goods receipt.( Menu path --Logistics -> Plant maintenance -> Management of technical objects -> Installed base -> Create (special) -> With reference to production data.)
Example: Say FG sr. no. is 1
And components serial no. are- 1,5,10,20 and so on.
After assignment of components it can be viewed on right part of screen, You can have the assignment history--- ie for which assembly no. which components are assigned or vice versa. In production order i.e in descrete mfg. it can be directly done at the time of operation confirmation.
The following is the detail steps:
1. T code--COIB
2. Enter material code ( FG). You can select specific serial no. of FG --- by putting sr. no. in serial no. field.
3. Click on list tree- you will find FG with serial numbers.
4. Click on explode-- it will show the BOM ( in bottom left corner of screen)
5. Select the FG numbers for which you want to assign the componets
6. Clik on tranfer
7. Select the component
8. Also select the FG no. on right side screen.
9. Select the serial no. which you want to assign to an FG
10. Click on assign
11. You will find all the components will get assigned to FG with serial numbers.
12. Now on right side screen there is "save" button. ( It will ask you create/ change as built in foreground or background?
13. Select as foreground
14. Save
15. You will find a message at the borttom --- saved.
16. Now you will find tick mark ( in front of FG material) in right part of screen ( indication of assignment of components)
Thanks

I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download.

I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download. I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers. I tried with cs2 and I got an error message that some bit of information was incorrect. I currently have both downloaded on two other lap tops I own. One is operational and one is dead. I cannot access the dead one to remove the program. Thank you in advance for any assistance.

For CS2 you will need to download a special new version
CS2 Activation
You might find CS4 download here
Prodesign Tools — Photoshop Direct Download Links

Need help in query to display lot and serial numbers for a Wip Job Component

Hi ALL,
I have a requirement as below.
I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
Thanks

Thank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you.

Serial numbers for goods receipt

hi,
while doing grn via migo t code serial numberes are entered wrongly.
means current serial number is 4 digits 2000,2001,2002,,, but 8 digit serial numbers(20002001) are entered wrongly in migo ,101m type. when i am going to do grn for that materiall it is taking 8 digit serial number
how to block those 8 digit serial numbers? How to continue current serial number series as(2000)"
how to initialize serial numbers for a particular material

Hi Vasanth,
I'm not really fluent in VB, but I think that a SerialNumbers.Add() and SerialNumbers.SetCurrentLine() are missing before the Next
Regards,
Eric

Serial numbers for materials

hello,
I have done a setup for serial numbers and when I do the GR I get a blank serial number list.
I earlier used transaction IQ04 and maintained for one article the various serial numbers.
When I do the GR I must be able to autmaticlaly see all the serial numbers related to the article. The system shows blank serial numbers although I have maintained them.
Can you help to identify what I have missed that the serial number based on aarticle doesnt get coped over to the GR document?
Another point is when I do the GI I also dont see the serial numbers for which I have done the GR for the article. What am I missing here?
Thanks

hi
how the serial no profile has been configured ,ie if the exist required is marked in the serial no profile then while making the GR you have to select the serial no alredy created,but if you doesn't select the same you have to mark the serial no automatically while making the goods receipt
kindly check
regards
thyagarajan

Error in bapi_goodsmvmt_create: Maintain serial numbers for total quantity.

Help!
I am using bapi_goodsmvmt_create.
But it always return the error message : Maintain serial numbers for total quantity.
I passed all the required parameters as specified in the forums that i had browsed.
Pls advise what is the cause of the error?
Thanks and God bless.

Hi Sridhar!
Thank you for the very helpful link.
That link ended solve my problem.
Sorry for this late reply.
navi

'Maintain serial numbers for total quantity error in bapi_goodsmvt_create

HI Experts,
I am doing a goods movement programatically by using BAPI_GOODSMVT_CREATE.
Though I am passing the serial no. for the document item still I am getting an error: 'Maintain serial numbers for total quantity'.
My code goes like this:
*-- Read all the items for the item category belonging to the plant
     loop at lt_lips into lw_lips where pstyv is not initial.
*-- Process the goods movement - Fill the data
          lw_gmvt-material = lw_lips-matnr.
          lw_gmvt-plant = lw_cat-werks.
          lw_gmvt-stge_loc = lw_cat-lgort.
          lw_gmvt-batch = lw_lips-charg.
          lw_gmvt-move_type = lw_cat-bwlvs.
          lw_gmvt-customer = <st_xvbpa>-kunnr.
          lw_gmvt-s_ord_item = lw_lips-posnr.
          lw_gmvt-entry_qnt = lw_lips-lfimg.
          lw_gmvt-entry_uom = lw_lips-meins.
          lw_gmvt-entry_uom_iso = lw_lips-meins.
         lw_gmvt-ref_doc = xlikp-vbeln.
          lw_gmvt-quantity = lw_lips-lfimg.
          lw_gmvt-base_uom = lw_lips-meins.
          append lw_gmvt to lt_gmvt.
          clear: lw_gmvt.
BOC for serial numbers
          if lt_ser02 is not initial and lt_objk is not initial.
            clear: lw_ser02,
                   lw_objk.
            read table lt_ser02 into lw_ser02 with key sdaufnr = cvbak-vbeln
                                                       posnr = lw_lips-posnr
                                                       sd_postyp = lw_lips-pstyv binary search.
            if sy-subrc = 0.
              read table lt_objk into lw_objk with key obknr = lw_ser02-obknr binary search.
              if sy-subrc = 0.
*-- Check if serial number is populated
              if lw_objk-sernr is not initial.
*-- Fill the serial number table for BAPI movement
                  clear: lw_sno.
                  lw_sno-matdoc_itm = lw_lips-posnr.
                  lw_sno-serialno = lw_objk-sernr.
                  append lw_sno to lt_sno.
              endif. "Serial number not initial
              endif. "OBJK read
            endif. "SER02 read
          endif. "SER02 and OBJK is not initial
EOC for serial numbers
        endif. "Category table read
        clear: lw_cat, lw_lips.
     endloop.
*-- Execute the BAPI only if item table is filled on the above condition
     if lt_gmvt is not initial.
*-- Fill the header details
        lw_header-pstng_date = xlikp-erdat.
        lw_code-gm_code = lc_03.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
          EXPORTING
            GOODSMVT_HEADER               = lw_header
            GOODSMVT_CODE                 = lw_code
           IMPORTING
            MATERIALDOCUMENT              = lv_mblnr
            MATDOCUMENTYEAR               = lv_mjahr
          TABLES
            GOODSMVT_ITEM                 = lt_gmvt
            GOODSMVT_SERIALNUMBER         = lt_sno
            RETURN                        = lt_return.
Please suggest.
Regards,
Sangeeta.

Hi Banerjee,
Actually we are trying to use the same bapi from se37, we are passing all the details which is required to process the bapi_goodmvt_create. But still the bapi returning the same error what sangeeta got in the above. Can you please guide me how to achieve this.
how the values has to pass to the Serial Number?
What exactly meant by Counter Values ?
Regards,
Siva

DI-Error: You cannot select batch or serial numbers for a closed row

Hello Experts,
I have several B1-Systems connected to R/3-Systems via B1iSN.
In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
<Document_Lines>
*<row>* 
    *<LineNum>0</LineNum>*
*</row>*
   <row> 
    <LineNum>1</LineNum>
    <ItemCode>ABCDEFGHIJK</ItemCode>
</row>
</Document_Lines>
Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
DI Error: (-10) You cannot select batch or serial numbers for a closed row
Any ideas to solve that Error? Thanks.
Regards,
GB

Hi Bastian,
I have still one open question. How to tread Document Lines Additional Expenses?
If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
Example:
<Document_LinesAdditionalExpenses>
-      <row>
           <LineNumber>4</LineNumber>*no expenses*
</row>
-      <row>
           <LineNumber>0</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>1</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>2</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>3</LineNumber>*expenses correct*
           <ExpenseCode>3</ExpenseCode>
           <LineTotal>10.00</LineTotal>
</row>
</Document_LinesAdditionalExpenses>
How can I solve that?
Thanks and regards,
GB

Retrieve Multiple Serial Numbers for given Delivery Document and Item

Hello Experts,
                      I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
Please provide me with the CMOD logic to do so.

Hi,
You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
LIPS into corresponding fields of Table ITAB_LIPS.
4) write one more select statement to fetch Serial number data.
Select DEL DOC, DEL ITEM ZZSERNO from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
where DEL DOC = ITAB_LIPS-DEL DOC and
            DEL ITEM = ITAB_LIPS-DEL ITEM.
Loop at ITAB_OBJK.
Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
IF SY-SUBRC = 0.
ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
ENDIF
ENDLOOP.
Hope the above code helps
Sujan

I don't know my serial numbers for QT Pro.

I have 3 serial numbers for QuickTime Pro but don't know how to find them on your website anymore. I recently bought a Macbook Pro and wanted to install QTP on it using one of my serial numbers. Please help.

Log in at the Apple Store using the same ID as your purchase and click the "downloadable software history" link to review your purchases.

Can we capture two types of Serial Numbers for a material?

Hi,
I have scenario where i need to capture two different types of serial numbers for a material. This scenario is very similar to the below one -
Say if a CAR is a serialized material, then i want to capture engine no. and chasis no. for each car.
I know in standard serial number management, we can capture one kind of serial no. for an item, but can we capture two types of serial number for an item? If yes, how we can do that?
Please help.
Thanks,
Parimal.

Hi,
No it is not possible to have two serial numbers for a material.
The main attribute of a serial number is that it is UNIQUE.
You can better have the vehicle number as the required serial number and the other numbers under the Manufacturer data of the General data tab of the IQ01 transaction. ( Equipment master creation ).
You can better change the name of the manufacturer data such as Model number to Engine numeber and Manu serial no to Chasis no etc.., using CMOD transactions.
Regards

Missing Serial Numbers for CS4 COmponents & Acrobat X Pro

Similar Messages

Maybe you are looking for