Missing Setup
Hey guys im. gonna install adobe photoshop cs6 trial today and i got this error.
"Windows cannot find"
"C:\Users\------\AppData\Local\Adobe\OOBE\PDApp\core\..\D6\..\DEcore\Setup.exe"
"Make sure you typed the name correctly, and then try again"
Thanks.
Hi MegaDarktech,
You can post your question to Photoshop forum( http://forums.adobe.com/community/photoshop ). They might give you some help.
Similar Messages
-
missing setup cartridges
Hi Tees325,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are missing a set up ink cartridge. I would very much like to assist you on this matter. Please respond to me with your Model Number of your printer and I will be happy to help.
How Do I Find My Model Number?
Please respond back at your convenience.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I downloaded Adobe CS5.5 Master Suite: Missing Setup File
I don't know what to do. My school issued free issue (legally) of Adobe CS5.5 Master collection. I downloaded the whole thing through my Adobe Downloader, but now it is saying that I am missing the setup file. What can I do?
It seems that the package might be corrupt due to which you are getting the missing file error.
Consider re-downloading the package.
You can download from the direct download links available at : http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
But make sure you follow the important steps mentioned on the page before initiating the download. -
Missing setup statements when exporting to java source code
We are moving from Toplink 9i to Toplink 10g. (I know, we're a little behind the times). I saved the project in 10g checked to make sure all the settings were the same as in the 9i project. When I export the project to java source code, we're missing the following configuration setup statements.
Has anyone else run in to this issue? (login is a DatabaseLogin object)
// Configuration properties.
login.setUsesNativeSequencing(false);
login.setSequencePreallocationSize(50);
login.setSequenceTableName("SEQUENCE");
login.setSequenceNameFieldName("SEQ_NAME");
login.setSequenceCounterFieldName("SEQ_COUNT");
login.setShouldBindAllParameters(false);
login.setShouldCacheAllStatements(false);
login.setUsesByteArrayBinding(true);
login.setUsesStringBinding(false);
if (login.shouldUseByteArrayBinding()) {
login.setUsesStreamsForBinding(false);
login.setShouldForceFieldNamesToUpperCase(false);
login.setShouldOptimizeDataConversion(true);
login.setShouldTrimStrings(true);
login.setUsesBatchWriting(false);
if (login.shouldUseBatchWriting()) {
login.setUsesJDBCBatchWriting(true);
login.setUsesExternalConnectionPooling(false);
login.setUsesExternalTransactionController(false);These settings are all the defaults, so not required. The project code generation no longer includes defaults.
-- James : http://www.eclipselink.org -
I need to monitor ink levels in my Deskjet D4160, but evidently need HP's Printer Setup Utility for Mac OS 10.7, which is not on my computer. If I ever had it, it's disappeared.
I've searched HP's site for a download and can't find one. Mac's Software Update says all my software is up-to-date.
Can anybody tell me how I can get one?Hi @pbrissett,
Welcome to the HP Forums!
I noticed that you are missing a setup utility to monitor your ink levels for your HP Deskjet D4160 on Mac OS X 10.7. I am happy to help!
According to this guide, Setting Up the Printer OS X v10.7 Lion in for HP Printers. This printer is using the built-in driver for the Mac OS X 10.7 Operating System, and there is no HP Full Feature Software and Drivers for this printer, for this Operating System.
If you need to check your ink levels, you can print a self-test report:
Make sure that plain white paper is loaded in the input tray.
Press and hold the Power button ().
While holding the Power button, press the Photosmart Express button ().
Release both buttons. The self-test report prints.
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Missing setup.exe for production and web premium
I donwloaded all of the files for Production Premium and Web Premium, but I am missing the file setup.exe for both. Is there a quick way to get this without redownloading everything?
I am having a similar problem. I just purchesed Dreamweaver CS4 on DVD, and it is missing the setup.exe file. I read the read me file and looked in the folder where is says it should be, and it's not there. I also did a search for "setup.exe" on the entire disk and no results came up.
Any suggestions? -
I was thinking installing the Logic Pro to my iMac today, and i can´t find the Setup CD...
I have the other cd´s and serial number, but missing the setup cd!
Anyone who know if this can be downloaded somwhere?you have to call applecare and they can send u one if u have the serial number to prove you bought it
-
Hello everyone. I'm told that I can run a repair of Office 2013 via the following command line pointing to a repair config xml we made and placed on a server. Only problem is that my machines don't have a setup.exe in that path. Did the
path where setup.exe is located change or something?
%PROGRAMFILES(x86)%\Common Files\microsoft shared\OFFICE15\Office Setup Controller\setup.exe /repair ProPlus /config \\server\share\RepairConfig.xmlIs your Office a Click-To-Run version or a MSI (traditional) version? If it’s a MSI version, setup.exe should be there. If it’s a Click-To-Run version, then you should not find any file called setup.exe there in that path.
For Click-To-Run version of Office, you should run the Office Deployment Tool and provide a custom Configuration.xml configuration file. The Office Deployment Tool performs the tasks that are specified by using the optional properties in
the configuration file. For details about Office Deployment Tool for Click-to-Run, please refer to this article:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx -
PD 1600,Missing Setup.exe
Hi
I recently reformatted my HP Pocket Media Drive without saving the PMD Folder. So now have lost my Setup.exe file.
My drive is useless now as I can't access it in any way.
Please help, is there any way to get this file as HP has told me I am S.O.L.
Thank you in advance
MarkysvetteNo Setup is required to make the PMD work, thie setup is either for the Backup program or a little applet to help crete folders for Media Center.The PMD can work out of the box with Windows USB drivers only.
When the PMD is connected, are you getting anything any indication in the task bar in the Safely Remove icon? You might need to go to Control Panel/Administrative Tools/Computer Management/Disk Management to see how your computer is dealing with the PMD. Sometimes there might be a second disk trying to get the same Drive letter.
Cheers,
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you. -
I bought a time capsule. I've hooked it to the internet WAN to modem via ethernet. I've hooked it to my macbook pro via ethernet. I've hooked it to my printer via USB. I turned the time capsule on. I opened airport utility which made me make up a password. And that was all. It didn't open the setup assistant, and I can't find how to setup for the first time (everything just says it should open automatically). I'm useless on computers (especially apple). Please help - in simple language. Thanks
LexSchellings wrote:
You can download the previous 5.6 version and install it next to the V6 one just change the name a bit.
No, it won't install on Mountain Lion.
It will run on Mountain Lion, though. If you have a Lion installation, you can install it there, then just copy it to ML. If not, you can use the Pacifist app to extract it from the download on ML.
The name is Airport Utility 5.6.1, so you don't have to rename it to put it in the same folder as Airport Utility. -
Hey guys,
I'm trying to install the Adobe Photoshop CS6 trial today and i got this error.....
"Windows cannot find"
"C:\Users\------\AppData\Local\Adobe\OOBE\PDApp\core\..\D6\..\DEcore\Setup.exe"
"Make sure you typed the name correctly, and then try again"
How can I fix this?
Thanks.Gbert12 when do you receive this error? Does it occur when you are trying to uninstall? What version of Windows are you using?
-
I am trying to use my PSUS4 print server, but can't find the setup CD. I've tried searching the linksys site to download the setup wizard, but it isn't there. Does anyone have a suggestion as to how I can setup my print server without the disk or where I can download the setup wizard? Thanks!!!
Connect the print server to the router with the Ethernet cable.
Connect the printer to the print server with the USB cable. Power cycle the print server.
First you will need to find the IP address of your print server and assign a static IP address. Follow this link to assign static IP address to the print server.
Once you assign a static IP address to your print server, you need to configure the printer port on your computer.
What is the operating system on your computer?
Follow this link to configure printer port on windows Vista computer. -
I can't install Photoshop 5.0 because it says "can't find setup.ini" and I can't get around this problem. can anyone help?
Also, is there a differences between PS 5.0, and PS C5? HELPHi,
What is the operating system you are running. Are you installing it from the disk?Photoshop 5.0 is different from photoshop CS5 (version 12.0). -
Missing setup CD-ROM for WVC54GC
Is a copy of the setup cd-rom available for this camera or can I download setup from a website? I have misplaced my cd-rom and would like to put my camera back in use. Model number is WVC54GC. Thanks!
(Mod note: Removed non-public information. Thank you.)
Message Edited by Vince_02 on 11-26-2009 08:28 AM1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds... -
[SOLVED] Asus 900 : ALSA plays sound, but microphone doesn't work
Hi,
This week I installed Arch Linux (kernel 3.1.8-1-ARCH) on my Asus 900 with HDA Intel Realtek ALC662 rev1 sound card. The wiki and google and existing forum posts have been good for most issues, but I'm stumped on ALSA configuration. So here's my first forum post for advice.
I configured sound OK following advice in the wiki and twiddling settings with alsamixer, through both the internal speaker and through the headphones, but I can't get internal or external microphone to work. I'm testing with:
arecord -d 3 junk.wav
then when I play back via:
aplay junk.wav
there is only soft static (with audible soft clicks at the start and end).
(Other files like /usr/share/sounds/alsa/Front_Center.wav play fine.)
alsamixer recognizes and reports my HDA Intel card, Realtek ALC662 rev1.
https://wiki.archlinux.org/index.php/Alsa has several suggestions of options for the snd-hda-intel module.
Different pages suggest different places, which was confusing until I discovered that they can go in any file in /etc/modprobe.d so I'm putting them in /etc/modprobe.d/snd-hda-intel.conf .
I added
options snd-hda-intel enable_msi=1
with no luck.
I have tried various model=XXX parameters (based on many suggestions found googling for Asus 900, alsa, ALC662, etc problems):
options snd-hda-intel model=auto
options snd-hda-intel model=asus
options snd-hda-intel model=asus-laptop
options snd-hda-intel model=laptop
options snd-hda-intel model=ref
options snd-hda-intel model=asus-mode1
options snd-hda-intel model=asus-mode2
options snd-hda-intel model=asus-mode8
and I do
rmomd snd-hda-intel && modprobe snd-hda-intel
after each modification, which makes a little click in the speakers as the module is restarted.
I don't know what the differences between asus-mode1, asus-mode2 etc are supposed to be - I've failed to find clear documentation about them, but AFAIK they seem to be the only valid model choices, unlike stuff like laptop, asus, etc.
I find asus-mod1 etc at https://github.com/torvalds/linux/blob/ … _realtek.c and various other webpages.
I found they vary the items presented by alsamixer but none of the 8 asus-modeN values helped me get the mic working. (The only obvious change was asus-mode8 made my headphone stop working, unlike asus-mod1 through asus-mod7.)
I looked at /var/log/kernel.log when doing the snd-hda-intel module reload for various values of model= and they all look similar to this:
snd_hda_intel 0000:00:1b.0: PCI INT A disabled
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_code: ALC662 rev1: BIOS auto-probing
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input24
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
(Note the emphasized line about BIOS auto-probing only comes up when not using model= or when trying various suggested model values that don't seem to be actually defined for ALC662, e.g. stuff like model=asus, etc.)
Here's a list of alsamixer settings I used for various models. (Note I also tried muting and raising various higher boost levels, and when there's an Internal Mic or F-Mic item I tried various combinations. The following are just what seem the most plausible settings to me.)
model=asus
model=asus-auto
model=auto
alsamixer presents 14 items (boosts are paired) :
Master 100 (dB gain: 0.00)
Headphone 00
Speaker 100 (dB gain: 0.00, 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
Mic Boost 22 (dB gain: 10.00, 10.00)
Mic Boost 22 (dB gain: 10.00, 10.00)
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Auto-Mute Mode Enabled
Digital 25 (dB gain: 0.50, 0.50)
Internal Mic 56 (dB gain: 0.00, 0.00)
Internal Mic Boost 22 (dB gain: 10.00, 10.00)
Internal Mic Boost 22 (dB gain: 10.00, 10.00)
model=asus-mode1
alsamixer [All] presents 8 items:
Master 100 (dB gain: 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
speaker & headphones work, neither mic works
model=asus-mode2
alsamixer [All] presents 11 items:
Master 100 (dB gain: 0.00)
Headphone 00
Speaker 100 (dB gain: 0.00, 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
F-Mic 56 (dB gain: 0.00, 0.00)
model=asus-mode3
alsamixer [All] presents 9 items:
Master 100 (dB gain: 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
F-Mic 56 (dB gain: 0.00, 0.00)
model=asus-mode4
alsamixer presents 9 items
Master 100 (dB gain: 0.00, 0.00)
Headphone 100 (dB gain: 0.00, 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
model=asus-mode5
alsamixer presents same 9 items as asus-mode4
model=asus-mode6
alsamixer [All] presents 9 items same as asus-mode3
model=asus-mode7
alsamixer [All] presents 12 items:
Master 100 (dB gain: 0.00, 0.00)
Headphone1 00
Headphone2 00
Speaker 100 (dB gain: 0.00, 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
IntMic 56 (dB gain: 0.50, 0.50)
model=asus-mode8
alsamixer [All] presents 11 items:
Master 100 (dB gain: 0.00, 0.00)
Headphone1 00
Headphone2 00
Speaker 100 (dB gain: 0.00, 0.00)
PCM 100 (dB gain: 0.00, 0.00)
Mic 56 (dB gain: 0.00, 0.00)
S/PDIF mute
S/PDIF Default PCM 00
Beep MM
Capture 14 (dB gain: 0.00, 0.00)
Digital 25 (dB gain: 0.50, 0.50)
No headphone output for asus-mode8!?
I'm not interested in doing anything fancy (e.g. mixing multiple sources or whatever), I just want basic mic functionality.
Finally here's some info requested from the archlinux.org/index.php/Alsa:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod|grep snd
snd_hda_intel 19325 0
snd_hda_codec_realtek 211044 1
snd_hda_codec 69829 2 snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 4942 1 snd_hda_codec
snd_pcm 60207 2 snd_hda_intel,snd_hda_codec
snd_timer 15438 1 snd_pcm
snd 43817 6 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5018 1 snd
snd_page_alloc 5869 2 snd_hda_intel,snd_pcm
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jan 11 20:43 by-path
crw-rw---T 1 root audio 116, 5 Jan 11 20:43 controlC0
crw-rw---T 1 root audio 116, 4 Jan 11 20:43 hwC0D0
crw-rw---T 1 root audio 116, 3 Jan 11 21:01 pcmC0D0c
crw-rw---T 1 root audio 116, 2 Jan 11 21:01 pcmC0D0p
crw-rw---T 1 root audio 116, 1 Jan 11 15:23 seq
crw-rw---T 1 root audio 116, 33 Jan 11 15:23 timer
Has anyone got sound recording working on an Asus 900 with HDA Intel Realtek ALC662 rev1 ...?
Thanks for any help! (And for feedback whether this post gave too much info or not enough, or other suggestions for posting such requests. Sorry if this was too long, but it seemed better to err on the side of too much info...)
Last edited by goulo (2012-01-13 18:30:13)Hello,
I don't have your soundcard but maybe the following information is helpful, though:
Install the linux-docs package, then you have some information about your soundcard drivers in "/usr/src/linux-*/Documentation/sound/alsa/". Exspecially "HD-Audio.txt" and "HD-Audio-Models.txt" might be important. In the Models file it is stated that just the "asus-mode*" are legitimate model parameters for your soundcard and in the HD-Autio.txt file it is more or less said that trial and error the modules is the way to go to find the "correct module". Further there is a section
Capture Problems
~~~~~~~~~~~~~~~~
The capture problems are often because of missing setups of mixers.
Thus, before submitting a bug report, make sure that you set up the
mixer correctly. For example, both "Capture Volume" and "Capture
Switch" have to be set properly in addition to the right "Capture
Source" or "Input Source" selection. Some devices have "Mic Boost"
volume or switch.
When the PCM device is opened via "default" PCM (without pulse-audio
plugin), you'll likely have "Digital Capture Volume" control as well.
This is provided for the extra gain/attenuation of the signal in
software, especially for the inputs without the hardware volume
control such as digital microphones. Unless really needed, this
should be set to exactly 50%, corresponding to 0dB -- neither extra
gain nor attenuation. When you use "hw" PCM, i.e., a raw access PCM,
this control will have no influence, though.
It's known that some codecs / devices have fairly bad analog circuits,
and the recorded sound contains a certain DC-offset. This is no bug
of the driver.
So check your mixer, here and here are nice tutorials.
Greetings
matse
Last edited by matse (2012-01-12 16:30:09)
Maybe you are looking for
-
AFW: Failed to transmit message due to RecoverableException
Hi all, I use a XI 3.0 SP 14. I've created a BPM with 3 steps: 1) receive step 2) send synchronous step 3) send asynchronous step XI exposes a Asynchronous Message Interface as a Web Service. Than the BPM uses this information to send a synchronous
-
Switch OK, now can't play!
On Friday I used migration assistant to move all files from old iMac G-5 to new iMac. When I try to play the songs I get an alert that I am not authorized to play them on this (new) computer. I type in the ID and my new password, the same ones I used
-
I just bought 6288 can I switch the view on the screen from portrait to landscape?
-
IUser problem with com.sapportals.portal.security.usermanagement
I am trying to get the current user so I have written IUser user = request.getUser(); I have imported com.sap.security.api.*; The compiler insists I need com.sapportals.portal.security.usermanagement.IUser I thought that version was deprecated or at
-
What is the name of the Apple App to read/convert excel on iPhone?
what is the name of the Apple App to read/convert excel on iPhone?